used IMET Circular Saws

Imet Record 315/350 - Cold Saw - Suitable for cutting metal profiles and solid materials up to 70 kg/mm² - Mitre cuts from 0 degrees to 45 degrees left and right - Quick-release double vise - HSS saw blade - Pedestal with storage cabinet Specification: Cutting Capacity - 0°round: 125 mm - Square: 110 mm - Rectangular: 160 x 90 mm Cutting capacity 45° left: - Round: 105 mm - Square: 90 mm - Rectangular: 80 x 100 mm Cutting capacity 45° right: - Round: 70 mm - Square: 65 mm - Rectangular: 60 x 70 mm Machine data: - Saw blade size: 350 / 32 mm - Saw blade speed: 30 / 60 rpm - Motor power: 1.8 / 2.5 kW - Coolant tank: 40 l - Machine dimensions WxHxD: 770 x 1900 x 1200 mm - Weight: approx. 210 kg

Capacity round maximum diameter: 130 mm Angle degrees maximum: 90 Feeding length automatic feeder: 0 mm Diameter sawing blade: 370 mm MACH-id    5176 MAKE        IMET Italia TYPE          SIRIO 370 SH-E / ESC YOP            2016 SPECIFICATIONS Bandsaw / Circelblade / Automat       Disc Saw Angle L / R Degrees      - 45 / 90 / + 30 Cutting capacity 90 ˚ Ø    130 mm Cuttting capacity 90 ˚ Flatt       180 x 100 mm blade dimensions     370 mm roller conveyor / push up / measuring     6000 Cutting speed M/min    70 M/min DIMENSIONS Length       14.000 mm Width          2.000 mm Height        2.000 mm

: neu : 2023 : 6246 : September 2023, Zwischenv : Italien : 3449 € : 300 x (2)2,5 x 32 mm : 33/66 U/Min : 45 ° : 45 ° : rund 102 mm, Quadratprofi : rund 90 mm, Quadratprofil : rund 80 mm, Quadratprofil : 1,5/2 kW : 500 mm : 1050 mm : 990 mm : 135 kg vice with quick clamping device and additional clapming strip for reduced cuttinag burr reduction gear and clutch to save the gear and sawing blades coolant equipment saw blade protection material gauge pedestal 1 saw blade operating manual in German or English The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : 2022 : 6225 : prompt, Zwischenverkauf v : Italien : 4400 € : 1 : 350 mm : 1800 / 3600 U/Min : 45 ° : 45 ° : rund 120 mm, Quadratprofi : rund 115 mm, Quadratprofi : rund 115 mm, Quadratprofi : rund 65 mm, Quadratprofil : 1,5/1,8 kW : 610 mm : 880 mm : 990 mm : 163 kg DEMO MACHINE - MINT CONDITION manual circular saw for aluminium stops at0°, 15°, 30°, 45°left and right hand-wheel to lock the head on all angles, graduation engraved on the worktable pair of front vices with quick clamping, free to move alongside the worktable aluminium removable jaws sawing blade protection material stop coolant equiptment head return by springs pedestal 1 saw blade users manual in GERMAN The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : 2022 : 6232 : prompt, Zwischenverkauf v : Italien : 4400 € : 1 : 350 mm : 350 x (2)2,5 x 32 mm : 30/60 U/Min : 45 ° : 45 ° : rund 125 mm, Quadratprofi : rund 105 mm, Quadratprofi : rund 70 mm, Quadratprofil : 1,8/2,5 kW : 600 mm : 1220 mm : 1060 mm : 206 kg DEMO MACHINE - MINT CONDITION very robust construction suited to cut metal profiles and solids (steel with resistance up to 70 kg/mm²) vice with quick clamping device and additional clapming strip for reduced cuttinag burr reduction gear and clutch to save the gear and sawing blades coolant equiptment sawing blade protection material stop thermic and magnetic motor protection 90° longitudinal cuts are possible thanks to the rotating vice pedestal 1 saw blade users manual in GERMAN The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 370 mm capacity 90 degrees: round: 120 mm capacity 90 degrees: square: 100 mm : 180x100 mm Working height: 925 mm saw blade turning speeds: 13 - 73 U/min total power requirement: 3,0 kW weight of the machine ca.: 0,95 t dimensions of the machine ca.: 1,9 x 1,45 x 2,1 m High-performance vertical circle saw, fully automatic hydropneumatic. · Miter left. 60° + right. 45° · Hydro-pneumatic control of the saw unit · Electro-pneumatic material feed unit · Smooth-running, powerful worm drive with large Gear ratio, integrated into a stable cast housing Achieving optimal cutting results · Vice with double clamping arm for low-burr cuts. Also included Quick lateral movement when changing the miter · Precision prism guide of the gear head, laterally adjustable · Particularly stable base frame with built-in automatic cooling system · Large chip drawer · Chip clearin ...

Description: High-performance vertical circle saw, fully automatic hydropneumatic. Miter left. 60° + right. 45° Hydro-pneumatic control of the saw unit Electro-pneumatic material feed unit Saw blade diameter 370 mm Cutting range at 90 degrees: around 120 mm Cutting area at 90 degrees: square 100 mm Cutting area at 90 degrees: rectangle 180x100 mm Feed roller conveyor 6000 mm Removal roller conveyor 2000mm Working height 925 mm Saw blade speeds 13 - 73 rpm Total power requirement 3.0 kW Machine weight approx. 0.95 t Space requirement approx. 1.9 x 1.45 x 2.1 m Approx. Onsite Dimension. (l x w x h): 5,000 x 2,000 x 2,000 mm, weight approx.: 950 kg

Store number: 3418 BANDS�GEAUTOMAT Manufacturer: IMET, Type: X-TECH 410 Machinen NR.: 033476001, Built: 2003 Specifications: Size sawing capacity dia. 410 mm Total output 5.5 kW Hydraulic. CNC control. Saw male 6150 x 41 x 1.3 Length: 2000 mm, Høhe: 2200 mm, Width: 3500 mm, Weight: 3450 kg

Capacity: 240 x 280mm Double sided miter Semi-automatic Mist lubrication system

Capacity 350 x 270 mm Material probe Two sided miter

Semi-automatic Double-sided miter inpsection possible video available

Capacity 300 x 180 mm / ø 255 mm / square 230 x 230 mm Semi-automatic Double-sided miter 0-60 left / 0-45 right

saw blade diameter: 350 mm cutting diameter: 110 mm capacity 90 degrees: flat: 180 x 85 mm capacity 45 degrees: round: 105 mm capacity 45 degrees: flat: 130 x 85 mm capacity 60 degrees: round: 105 mm capacity 60 degrees: flat: 90 x 85 mm turning speeds: 9-18-36-74 U/min vice: max. 180 mm Control: IMET CNC total power requirement: 1,5 / 2,2 kW weight: 710 kg range L-W-H: 2000 x 1100 x 2000 mm ** Current new price approx. 25.000 euros ** Special price on request Circular saws are used to cut thin-walled tubes and profiles. Clean, precise cut edges are achieved with the circular saw. Fast sawing and easy miter adjustment are the advantages of the circular saw. Basically, you should also pay attention to the correct cooling of the materials. Cooling lubrication is essential for metallic materials. Cooling lubrication is not required for non-metallic materials such as plastic, brass or cast i ...

capacity 90 degrees: round: 230 mm capacity 90 degrees: square: 230 mm : 280 x 150 band speed: 35/70 m/min saw band length: 2770 x 27 x 0,9 mm total power requirement: 1,5/1,8 kW weight of the machine ca.: 0,37 kg Dimensions (LxWxH): 1,5 x 1,2 x 1,3 0 Band saw including micro spray device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Description: Cylinder-controlled lowering system Hydraulic clamps weight approx.: 600 kg, Approx. Onsite Dimension. (l x w x h): 1,200 x 1,300 x 2,000 mm

Description: Double miter band saw with new engine and gearbox Completely overhauled! - Semi-automatic - Miter 45° / 60° Cutting range at 90 degrees: around 230 mm Cutting area at 90 degrees: square 230 mm Cutting area at 90 degrees: rectangle 280 x 150 Belt speed 35/70 m/min Saw band length 2770 x 27 x 0.9 mm Total power requirement 1.5/1.8 kW Machine weight approx. 0.37 t Dimensions LxWxH 1.5 x 1.2 x 1.3m weight approx.: 370 kg, Approx. Onsite Dimension. (l x w x h): 1,500 x 1,200 x 1,300 mm

This machine was specially to the grooves and separation of Built in the front of the drawer. On these machines panels can generally be tongued and divided.

Make: Omes Type: Tramatic 370S Year of construction: 1988 Saw blade diameter: 350 mm Features of this machine are: -mechanical pneumatic Vice -hydropneumatic feed can be adjusted (see Control Panel) -Saw process and open the Vice manually or automatically -After reaching the depth of saw the saw head will return automatically to its basic position Saw capacity - 90 ° degree cut -Diameter of 130 mm -100 x 100 mm rectangular tube -Fermentation cuts adjustable - right-hand and left-hand fermentation, if necessary in a voltage Machine has been little used

Qty. 1 Second-hand rail hard metal saw with drilling unit Mfc.: Heller Type: TEK001-73-37 Saw carriage: 610 ? 710 mm Cutting speed ? 6 stages: 63-200 m/min. Cutting area: rail height up to: 200 mm rail width up to: 200 mm Feeding speed: 50 ? 1250 mm/min. Power: 50 kW Drilling unit Qty. 3 Drilling spindles Drill diameter: 12 ? 40 mm z-stroke: 630 mm z-drill stroke (adj.): 250 mm Tool changing stroke (adj.): 380 mm Drill spindle diameter: 60 mm Min. distance from the end of the rail: 33 mm Drill spindle distance - spindle 1-3: min. 228 mm max. 600 mm Drill spindle distance ? spindle 1-2: min. 114 mm max. 486 mm Drill feeding speed: 40 ? 200 mm/min. Motor power: 30 kW, 1420 RPM Revolution range: Qty. 9 225 ? 280 ? 350 ? 450 ? 560 ? 710 ? 900 ? 1120 ? 1400 RPM

Table dimensions: 800 x 380 mm format table: 2600 x 270 mm be hem length: 2600 mm maximum blade diameter: 315 x 30 mm maximum cutting height 90° / 45°: 100 / 80 mm cutting width on the fence: 1200 mm height: 850 mm table extension: 500 x 310 mm extension table: 800 x 880 mm square table with roller: 830 x 520 mm speed of main saw blade: 4500 RPM scoring sawblade speed: 8500 RPM scoring sawblade: 2-100 x 20 mm suction connection Ø: 100 mm motor power output S1 100%: 3.8 kW (5.1 HP) engine power S6 40%: 5.3 kW (7,2 HP) voltage: 400 V machine dimensions (W x D x H): 2600 x 2800 x 1100 mm weight approx.: 331 kg

Weibert S2 Circular sawing machines Formatschiebetisch: 1150mm Engine power: 3 KW (5.5 HP), 400V,. n = 4000 min Cutting height: 103 mm Blade: 250-315 mm swivel: 90 °-45 ° WJ 700100 Options: WJ-700101 format table 1270 mm WJ-700102 format table 1500 mm WJ-800105 before scoring unit with motor 0, 75kW WJ-400104 suction pipe with hose

Table dimensions: 940x560mm Be hem length: 3200 mm Dimensions Formatschiebeschlitten: 360x146x3200mm Max cutting height 90 ° / 45 ° with preliminary Ritz: 138 / 98 mm Max width of the lengths left by the saw blade: 3260 mm RIP fence cutting width: 1270 mm Blade angle: 90 °-45 ° maximum blade diameter with ago Ritz: 400 mm Before Ritz saw blade diameter: Ø 120 mm Rotation speed of main saw blade: 3500/5000 min-1 speed scoring sawblade: 9200 min-1 engine power 400 V / 50 Hz / S6 - 40%: 7 kW (9,5 HP) Engine power before Ritz: 0.55 (0.75 kW) Dust extraction outlet diameter: 120 mm AbsaugstutzenØ blade guard: 60 mm M-design: with electric height adjustment and tilting the saw unit G & pieces 5504756

Technical data: Saw blade diameter: 520mm Mitre: 90° / 45° / 30° Drive capacity: 1.6 / 2.8 kW Dimensions: WxDxH 1520x1520x1560mm Working height: 900 mm Weight: 1250kg

Multiple lengths saw FAS 14 with 2 circular saw units per 2.2 kW, 3 x 400 V, 50 Hz. -maximum piece length 6000 mm -maximum cutting height 120 mm -maximum Board width 500 mm -Working height 700 mm -Feed speed approx. 0.2 m / sec -Feed drive gear motor 0.55 kW / 3 x 400 V, 50 Hz Built about 1965 Weight 1600 kg Engine No. 314 Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Aluminum circular saw machine make EISELESaw blade diameter :: 250 mmCutting area: 90 °: 45 °at Sägeblattdrm. 275 mm: 120 x 75 mm: 80 x 75 mmL-iron: 80 x 80 mm: 80 x 75 mmFlat iron: 120 x 75 mm: 80 x 75 mmSquare steel: 75 x 75 mm: 75 x 75 mmRound material: 90 mm: 90 mmSolid material round: 60 mmStandard saw blade: 275 x 2.0 x 40 mmDrive power:: 1 / 1.2 kWMachine head can be swiveled on both sides: 45-90-45-30 °Dimensions: 900 x 800 x 1100 mmWeight approx .: 230 kgused, from an operational resolutionin good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools