We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
used
Code: 0014 Brand: ITALPRESSE Model: V/2 Electric press for cold gluing Equipped with a motor that is operated by a switch with automatic return. This switch controls the movements of the mobile platen towards or away from the panels, while the required pressure and the release are controlled by a handwheel, which is on the side of the press. This system allows for maximum pressure with minimum effort Platen dimension mm 2500 x 1200 Opening mm 650 Pressure screw n°2 Installed power Hp 0,75 Overall dimensions: mm 2850 x 1200 x 1650 h Weight kg 880
used
TECHNICAL DATA: Working width mm: 3000 Working height mm: 1700 Downholders: 4
used
Press line SPECIFICATIONS: Automatic / manual operation Dimensions of the work table mm: 3,000 x 1,300 Number of pistons: 8, diameter Ø 70 mm Wood boiler Complete with loading and unloading system
used
Code: 0136 Brand: ITALPRESSE Model: FORMATIC 20.9 Hydraulic fluid membrane press Two sided lamination of veneer to panels shaped or profiled on one face and flat on the other to produce cabinet door raised panels, drawer fronts, desk tops, table tops, kitchen tops, etc. 3-D lamination of plastic foils (PVC, PPE, ABS, Transfer foil ) to panels sheped or profiled on one face to produce: cabinet doors, drawer fronts, desk tops, table tops, kitchen tops, store fixture components, room doors, etc. Platen dimensions mm 2000 x 900 Daylight mm 325 Cylinder stroke mm 325 Heating electric boiler Kw 27 Thrust ton 300 ton N° 3 thrust cylinders Hydraulic unit power Kw 5,5 Pressure control manometer Automatic pressure reset Opening timer Overall dimensions mm 3300 x 1400 x 2400 h Weight kg 8100
used
Code: 0158 Brand: ITALPRESSE Model: LOCK FORM SYSTEM AIR - CE Standard Hydraulic air membrane press with loading and unloading - CE Standard 3-D coated on one face lamination of veneer to panels shaped or profiled on one face and flat on the other to produce cabinet door raised panels, drawer fronts, desk tops, table tops, kitchen tops, etc. 3-D lamination of plastic foils (PVC, PPE, ABS, Transfer foil ) to panels sheped or profiled on one face to produce: cabinet doors, drawer fronts, desk tops, table tops, kitchen tops, store fixture components, room doors, etc. Platen dimensions mm 2650 x 1250 Piece height mm 55 Pressure control manometer Automatic pressure reset Opening timer
used
SPECIFICATIONS: Permissible working width mm: 3000 Permissible working height mm: 2000 Installed capacity KW: 1.5 Pushers: 4 Complete with hydraulic control unit and push-button panel
used
Max. hydraulic pressure: 400bar.
used
installation consisting of the following components: - glue station for 2-component glue - Input table with motorized rollers and 90 ? rotation - Composition table and loading in the press - Press model FAST / 130 - Horizontal pressure installation mounted on adjusted beam - Outfeed roller conveyor, not motorised technical data: dimensions of strips: length: 900 to 8,000 mm width: 20 to 45 mm height: 50 to 200 mm plates to be produced: length 8000 mm, 2 x 4000 mm, 4 x 2000 mm or 4 x 900 mm Bonding press: Dimensions: 1300 x 8500 mm press opening: 250 mm. Total pressure: approx. 200 tons 12 x overhead hydraulic pressure cylinders 2 rows of cylinders can be switched off 17 x lateral cylinders, individually switchable horizontal pressure 7 kg / cm? Attached electric boiler for thermal oil
used
Veneer press, manufacturer: ITALPRESSE, type: XL/6-S, year of manufacture: 2016, serial no.: 6302448, control SIEMENS Simatic HMI, pressing area: 1300x3000 mm, opening 400 mm, max. pressing pressure 90 tons, number of cylinders 6, cylinder diameter 70 mm, oil boiler max. 120 degrees, power: 21 kW
used
Code: 0022 Brand: ITALPRESSE Model: IT/310 - CE Standard Automatic veneer guillotine - CE Standard Automatic working cycle Hydraulic presser movement Motorised blade movement Robust front and rear steel supports Cutting length mm 3100 Cutting height mm 45 Rear register with electric movement Cutting display light Motor power Hp 5,5 Safety photocells Overall dimensions of assembled machine: mm 4100 x 1600 x 1500 h Weight kg 2200
used
Description: Max working size 3000x2000 mm Vise width 110 mm 5 hydraulic pistons Approx. Onsite Dimension. (l x w x h): 3,500 x 1,000 x 2,600 mm, weight approx.: 1,200 kg
used
New hot press, hydraulically Brand: ITALPRESSE Type XL/6 30-13 PEA Golden electric heating plate surface anodized to ensure high surface hardness and excellent corrision protection. - Electrical - heating plates: 3000 x 1300 mm - Total pressure: 120 to. - Number of hot plates: 2 pc. - Number of floors: 1 pc. - Stroke: 350 mm - Day light opening: 350 mm - All-round feeding - Number of cylinders: 6 pc. - Diameter of cylinder: 85 mm - Power consumption (hydraulic unit): 3 kW - Electric - combi - heating plates made out of two components: Aluminium - electric - heating plate Iso printing plate - Heating power 22 KW - High pressure isolation plates - Operating temperature: 70 - 90° C. - Max. Temperature: 120° C. - Supply: 400V/50 Hz - Safety accordance with CE standard Standard equipment: - Movement of the press table with rack and pinion parallel guidance at t ...
used
Ironing Pressing Line composed by In feeding Belt System Hot Press Cold Press Out Feeding Belt System
used
HOT PRESS type COLOMBO REMO HPC 8 / 160 second hand WITH SOLID STEEL PLATES Heavy-duty construction Hot water heating via a electric system on the back of the machine , not any connection needed , everything is included on the machine Total Kw for heating 25 Solid steel plates size mm. 3450 x 1400 n.08 pistons diam.mm. 90 max. thrust Ton. 160 specific pressure max. kgs.5 / cm2 opening mm. 660 emergency perimeter rope overall dimensions cm. 4500 x 2000 x 2700 H weight kgs. 8500
used
HOT PRESS Type KOLMAG useful size mm. 3000 x 1300 open mm. 450 n.06 cylinders volt. 380/50 weight : kgs. 4000 heating plan by water
used
Working Sizes: 1300 x 3500 mm
used
Veneer press Leopida Format: 2300 x 1000 mm Plates with hot water heating L x W x H: 2300 x 1100 x 2000 mm Weight approx. 2000 kg Built in 1978 The machine is in good condition, ready for operation. Changes, mistakes, intermediate sale reserved ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
used
see photos
used
Hydraulic press for bent glued parts Tuma FP120 Сharacteristic Table size, mm - 1400х600 Maximum opening size, mm - 1000 Number of upper cylinders, pcs - 2 Number of side cylinders, pcs - 2 Diameter of cylinders, mm - 160 Working pressure, Bar - 180-190 Year of manufacture - 1989
used
Veneering press OMC PL 105 LC 30/13 Water Work surface 3000x1300mm Opening width 400mm 6 cylinders with a diameter of 85mm Total pressure 105T Maximum heating temperature 85 degrees Control system logic contorl Machine control from touch panel readings Temperature, pressure force, shelf opening time, loading area calculator, programming of gluing processes Power 21KW CE Certificate Production 2023 Machine available on request New machine Net price
used
Veneer press OTT JU 65 Pressing area 2500 x 1100 mm 4 cylinders Electric heating Machine is FUNCTIONAL From location Upper Austria fixed price NET € 4,500.0
used
Press pressure up to 900 KN Hint: without ripcord
used
• 120 tons total pressing force • Pressing area 3,000 x 1,350 mm • With patented, thermostable electric heating plates with automatic temperature control system • Connected load of the heating plates with economy circuit 10.6 kW • Connected load of the hydraulics 2.2 kW • in 6-cylinder version Ø 85 mm • Lockable main switch • Push-button control • Stop button • Safety ripcord, safety edge • Timer with automatic opening and acoustic signal • Stroke = opening 400 mm • Infinitely adjustable stroke limitation • 2-stage hydraulics with automatic pressure follow-up • Compact hydraulic power unit mounted maintenance-free in the oil tank • Teflon bronze guides in the cylinders • Hard chrome-plated steel pistons • Heavy rack and pinion compensation for synchronous table movement • fully open on four sides • Economy circuit installed as s ...
used
Dimensions: 2,200 x 1,100 mm heating plate size Gold anodized heating plates 400 mm table opening height 4 hydraulic cylinders 50 tons of pressing pressure Stroke limitation Automatic opening Electrical opening and closing of the press table
used
Veneer press - School press - Experimental press BÜRKLE U40 built 1979 Ges. Power: 6.25 kW Nominal operating current: 14.5 A Power per heating plate: 2,750 W Plate size: 120 x 80 cm Electric Aluminum Heating Plates max. temperature: 120° C Opening width: 40 cm 4 hydraulic cylinders each with a diameter of 70 mm Nominal surface pressure: 4 kp/cm² max. surface pressure at 75% surface design: 5.5 kp/cm² Operating pressure: 260 bar Circumferential safety ripcord (emergency stop) Automatic opening (automatic opening after the preset time has elapsed) Press frame in dismountable design Weight: 1,350 kg Machine dimensions (approx. dimensions): L 165 cm W 96 cm H 173 cm School machine - The machine comes from a school training center.