1000 offers

maximum number of results exceeded > 1000
please refine your search

Category: 209
item-No.: 126876120
1995
3.949 €
-
Technical data: Brand: Casadei Type: TS 1600 Year of construction: 1995 V: 380 Max blade: 315 mm Saw rpm: 4200 RPM Lateral adjustment of the saw: 160 mm Cutting width: 1270 mm Milling spindle: 300 mm Cutting speeds: 2900 / 4400 / 6000 / 8000
Category: 107
item-No.: 126880051
2014
used machinery auction RESALE 14.000 €
Land-de DE
Weight approx.: 500 kg Dimensions (l x w x h) approx.: 600 x 2000 x 1270 mm Description: GSW WV 25/80 Roll Feed. machine no.: M 2014-00463, strip width 250 mm, strip thickness 0,5 up to 4,0 mm, strip thickness with fully width 3,0 mm, cross section 250 x 3,5 mm, roller diameter 80 mm, height adjustment approx. +- 50 mm, noise level 70 db(A), type of drive three-phase servo motor, drive nominal torque 15 Nm, gear ratio 7, electrical connection 3 x 400 V, 50 Hz. The machine is equipped with Topochrom feed rollers, se ...
Category: 202
item-No.: 126876116
1995
1.092 €
-
Technical data: Brand: Ott Type: Rondomat R/260 Workpiece thickness 8-40 mmgeeignet for all commonly used edge above stand be milling Copy milling machine for flush milling, chamfer milling and mill RADIUS 0.5 kW Weight ca: 100 kg
Category: 104
item-No.: 126879985
1990
used machinery auction RESALE 17.500 €
Land-de DE
Weight approx.: 21500 kg Dimensions (l x w x h) approx.: 6000 x 5400 x 4500 mm Description: Table size 2500 x 750 mm, max. table load 1.95 t, grinding area X/Y/Z 2000/750/950 mm, grinding disc dimensions 600x100x304.8 mm, grinding disc speed stepless up to 1000 rpm, longitudinal table movement (X-axis) feed electric/mechanic 50 - 24000 mm/min., vertical movement (Y-axis) feed 0.001 - 600 mm/min, table cross feed (Z-axis) feed 1-80 mm, rapid traverse max. 1500 mm/min., grinding spindle motor 22 kW, automatic grindin ...
Category: 831
item-No.: 126869381
1988
11.500 €
Land-it IT
Package of two machines: Polar 76 EM - Year 1988 -Photocells, air bed -Complete programmation -Spare knife, all accessories Polar 76 EM -Year 1984 -Complete programmation -Spare knife, all accessories
Category: 102
item-No.: 126879089
turning diameter over bed:850 mm turning diameter over slide rest:510 mm turning length:3000 mm with powered upper support: travel of cross-slide cross:600 mm movement of the upper support:250 mm bed width:600 (Monoblock) mm spindle bore:100 mm spindle nose:DIN 55029 Größe11 spindle taper:Ø120mm/Konus 1:20 spindle speeds:5~630 1/min metric threading:56,1~120 mm feeds - longitudinal:0,08~9,6 mm/min feeds - cross:0.04~4,8 mm/min rapid traverse longitudinal and cross:3640/1800 mm/min tailstock quill diameter:120 mm ...
Category: 102
item-No.: 126869380
2006
31.000 €
-
CNC lathe - inclined bed machine CMZ TBI 520 B stock no. 1105-02455 category CNC lathe - inclined bed machine make CMZ type TBI 520 B year 2006 condition second-hand machine CNC CNC FANUC 32 i storage France HAGUENAU origin JAPA n delivery after agreement cargo basis EXW (Incoterms 2010) free t slow technical details turning diameter 520 mm turning length 1100 mm CNC FANUC 32 i swing diameter 520 mm maximum turning diameter 420 mm rod diameter 90 mm turret stations 12 Travers away - x 280 mm traverse path - z 1120  ...
Category: 702
item-No.: 126876675
5 rows, cap. max. 8.200 pcs./h, model 1989/1990,\r\ninclude \r\ndivider + rounder, type MUS - G 5, model 1998\r\n doughweightrange max. 150 g\r\n include moulding drum 74 -85 g\r\nintermediate proofer, type ZGL5/273/360,\r\n proofing time approx.10 min.\r\nstamping unit, type FST 5/50\r\nfinal proofer type SG 0,6/1010/950,\r\n proofing time approx.35 min.\r\nairconditioning\r\ndepositing device, width 600 mm, max. length 800 mm
Category: 102
item-No.: 126869376
2002
29.000 €
-
CNC turning and milling center MAZAK SQT 200 M stock no. 1105-02454 category CNC turning and milling center brand MAZAK type SQT 200 M year 2002 State second-hand machine control CNC MAZATROL FUSION 640 T dialog storage France country of origin Japan shipping time immediately cargo basis EXW (Incoterms 2000) t slow technical details swing freely 360 mm turning length 1050 mm control MAZATROL FUSION 640 T dialog swing diameter 520 mm rapid traverse in X-and Z direction of 20 m / min feed diameter 250 mm rod diameter ...
Category: 702
item-No.: 126876465
computer-controlled, 24 diff. programs, 2 speeds, laminating, dividing and moulding combined in one machine,\r\ndougweight range 65 - 800 gr., cap. 750 - 6300 p./h\r\nproducing of soft- and hard dough, f.e. ciabatta, baguette\r\naccessories: 2 four cylinder-moulders\r\nincl. extender to mould extra-long
Category: 102
item-No.: 126869372
Manufacturer: Traub Model: TNA 700 Year of construction: 2001 Control: Traub TX 8i Turning length [mm]: 1,250 Spindle transmission rate [mm]: 102/102 Main spindle: Speed: 3,000 rpm Performance: approx. 53 kW Torque: approx. 900 nm Bar passage: 102 mm C-axis: 0.001 ° Chuck: 3 - jaw Chuck 315 mm Cylinder: hollow clamping cylinder Counter spindle: Speed: 3,000 rpm Performance: approx. 53 kW Torque: approx. 900 nm Bar passage: 102 mm C-axis: 0.001 ° Chuck: 3 - jaw Chuck 315 mm Cylinder: full  ...
Category: 702
item-No.: 126876627
chamfered up at the rear,\r\nwith supporting frame with panels on 3 sides.\r\nbelow basin d 535/400 / w 500/400, h 200mm\r\nupper basin d 335/280 / w 500/400, h 280mm\r\ndistance basin from the floor\r\nbelow 525 / upper 1060 mm\r\n
Category: 102
item-No.: 126869370
Manufacturer: Gildemeister Model: CTX 320 V6 linear Year of construction: 2005 Control: HEIDENHAIN TurnPlus IT Turning diameter [mm]: CA 246 Turning length [mm]: approx. 450 Spindle transmission rate [mm]: 65 Main spindle: Speed: 5,500 rpm Power: 20 kW Torque: 200 nm C-axis: 0.001 ° Bar passage: 65 mm Cylinder: hollow clamping cylinder Margins: differential pressure Chuck: Hainbuch Counter spindle: Rpm: 6.000 rpm Power: 9 kW Torque: 57 NM C-axis: 0.001 ° Bar passage: 30 mm Z2-axis: 380 m ...
Category: 702
item-No.: 126876403
equiped with\r\n- dough extruder\r\n- fat extruder\r\n- 2 falting units\r\n- 5 flour duster\r\n- 2 crossrollers\r\n- 2 guillotines \r\n- 1 satelliten/lamination units,\r\n- 2 gauging/lamination units,\r\n- outfeed conveyor approx. 20 m\r\ncondition as it is
Category: 101
item-No.: 126869368
Manufacturer: Alzmetall Model: CS 1200 P Year of construction: 2006 Control: HEIDENHAIN iTNC 530 Traverse path x/Y/Z [mm]: 1.200/600/800 Speed [RPM]: 8,000 Spindle: Rpm: 8.000 rpm : KW 38 Torque: 180 nm Tool holder: SK 40 General: Tool Magazine: 24 stations Rapid traverse x/Y/Z: 40/40/30 m / min Clamping surface: 1,250 x 630 mm Table load: 1,000 kg Equipment / accessories Displacement measuring systems: Directly in all axes Workpiece inspection: Infrared touch probe Chip disposal: chip conv ...
Category: 402
item-No.: 126869147
2009
66.600 EU?
Land-pl PL
The machine worked from the news for about a year, it was later dismantled. Since then stored in a heated hall, protected from dust. Inability to install and test the machines in action. Based on visual inspection found the completeness of the device.
Category: 107
item-No.: 126869360
Technical data: -Max working width 3100 mm - max cutting capacity St 40 6 mm -Angle adjustable mot. 0.5-3 ° -Cut gap adjustment - number of hydraulic hold-down device 17 PCs -Engine rear gauge 10-750 mm -front angle stop -Stroke rate depending on the angle and length 12-45 per/min -Hydraulic drive 400 V / 7.5 kW -Height 860 mm -Space requirement incl. back gauge, support arms approx. B 3950 x H 1800 x H 2200 mm -Weight approx. 4500 kg - with:-E foot switch -Cutting line illumina ...
Category: 806
item-No.: 126869161
2006
24.438 EU?
Land-pl PL
The machine is a combination of offset with digital printing. The entire process runs automatically - from setting up the plates to exposure, printing and cleaning - in one system. Thermal exposure of the plates takes place directly on the machine cylinders, it does not require chemical processing with a perfect fit. The machine works in anhydrous printing technology.
Category: 102
item-No.: 126869353
Manufacturer: Gildemeister Model: CTX 400 Year of construction: 2000 Control: HEIDENHAIN CNC pilot - turn plus Spindle transmission rate [mm]: 66 spindle: Speed: 5.000 rpm Power: 21 kW Torque: 240 NM Bar passage: 66 mm Position: C-axis Tool carrier (x/Z): Technology: Revolver with 12 stations Tool holder: 30 Milling operations: tool drive, each 2nd powered station X/Z axis travel: 220/635 mm Tailstock: Tailstock travel: 550 mm Recording: MK4 Equipment / accessories Chip management: swarf co ...
Category: 109
item-No.: 126864598
current capacity: kVA throat: mm contact pressure capacity: kp --------------------------------------------------: TECHNICAL SPECIFICATION: - Nominal capacity 50 % ED: 35 kVA New electronic SEVERSON This ad was created with MODUL MWS - the software solution of LogoTech.
You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)
more INA types: