used IMS Coffee grinders

Qty. 1 Second-hand cold rolling mill Mfc.: MCC, ABB, IMS Type: 6-Hi Cold Rolling Mill Built: 2009 Stopped: 2017 Annual capacity: 220,000 Ton/Year Annual running time (Hour): 6480 Strip Width: 800~1250 mm Thickness Entry: 1.5~3.5 mm Exit: 0.2 – 1.2 mm De-Coiler OD: 1000~2000 mm De-Coil ID: 610 mm De-Coil Weight: Max. 25 T Coil OD: 1000~2000 mm Coil ID: 610 mm Coil Weight: Max. 25 T Mill Max Speed: 1300 m/min Threading Speed: 30 m/min Main Drive Controller (3300 VAC) Mfc.: ABB ACS6000 Variable Speed Variable Voltage Xray Gauge Mfc.: IMS Germany Automation Siemens PLC/Wincc

Qty. 1 Second-hand roughing, finishing mills and special equipment Mfc.: DAVY, TMEIC, TOSHIBA, MITSUBISHI Type: 4-Hi Rev. Built: 1997 Revamped & Installed: 2008, 2011 Stopped in 7-2017 Revamped cost of USD 151.0 Mill. from 2008 up to 2011 Finishing mill equipped with CVC Roll plus Technology System Finishing mill – new hydraulic adjustment to increase rolling force to 90 MN Roughing & Finishing mills: Technology Control System (Level 1) Process Models (Level 2) for pass schedule calculation, profile & flatness control (PFC), Pacing system & Material tracking Revamped by SMS in 2011: Roughing mill: Slipper-type Spindles Product capacity: 2,000,000 ton/year Mill capacity: 30 Plates/h Entry Material: Slab T130~300 mm x W1,200~2,200 mm x L2,350~4,000 mm Final Product: Plate T5~180 mm x W1,200~4,100 mm x L max. 25 m Application: Ship building plate & Pipe pro ...

There are two identical presses available, max. stroke speed: 200mm/s, oil viscosity: 46cSt a 40°C, max. hydraulic/operating pressure: 25/ 210bar, weight of the half tool: 10t, pump power at 75/ 210bar: 200/ 70l/min, pump motor power: 30kW, weight: 25t.

IMS Mammography Giotto Image with the following device components: Tube Varian M-113 SP 0.1/0.3_Bj. 2002 Table top 18x24 and 24x30 • Before taking over, all devices or systems have been tested on site for their functionality. • The system is located in our warehouse in Freiberg / Germany. It is packed on pallets, professionally lashed and with Stretch film wrapped and can be picked up immediately • You buy the system in "ACTUAL" condition from the warehouse Freiberg (EXW), Saxony, Germany, and advance payment. • The sale takes place as "used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite full Functionality without guarantee. • The installation and configuration of the system or plant components must be carried out by a specialist authorised by the manufacturer or technicians!

punching force: 110 ton punching froce with Multi tool: 60 ton max punchingnbsp;capacity: dia 32 x 16 mm max punchingnbsp;capacity with Multi tool: dia 32 x 12 mm max punching capacity for big holes: dia 100 x 8 mm adjustable stroke: 80 mm adjustable stroke with Multi tool: 30 mm nbsp; Punching pressure: 110 ton Power needed: 9,5 kW Length: 3465 mm Depth: 1935 mm Height: 1900 mm Weight: 4400 kg

Compressive force max.: 55 kN Projection: 175 mm Punching stroke adjustable: 0 - 28 mm Number of strokes at 15 mm stroke: 30 Adjustable notch stroke: 0 - 60 mm Hydraulic drive: 380 V, 3 kW Required space: 1170 x 620 x 1470 mm Weight: 930 kg

Serial No.: 1704 Punching capacity: Ø 28 x 16 Available with special tools: Ø 100 x 4 Year of construction: 1997 Country of origin: Italy

Description: Complete set of 3 HSK 63F cones with ER32 collets HSK63F disassembly key 3x ER32 collets diameter 20 mm New item on order From payment it might takes approx 15 days for collection Approx. Onsite Dimension. (l x w x h): 500 x 350 x 400 mm, weight approx.: 15 kg

Description: Complete set of 3 HSK 63F cones with ER32 collets HSK63F disassembly key 3x ER32 collets diameter 20 mm New item on order From payment it might takes approx 15 days for collection Approx. Onsite Dimension. (l x w x h): 500 x 350 x 400 mm, weight approx.: 15 kg

Description: Tool for assembly for HSK 63 F connections New item on order From payment it might takes approx 15 days for collection Approx. Onsite Dimension. (l x w x h): 300 x 300 x 200 mm, weight approx.: 5 kg

Description: Lot composed of 3 HSK 63F cones ER32 balanced collet holder complete with 3 ,ER32 caliper New item on order From payment it might takes approx 15 days for collection  , Approx. Onsite Dimension. (l x w x h): 300 x 300 x 200 mm, weight approx.: 10 kg

Description: Lot composed of 3 HSK 63F cones ER32 balanced collet holder complete with 3 ,ER32 caliper New item on order From payment it might takes approx 15 days for collection Approx. Onsite Dimension. (l x w x h): 300 x 300 x 200 mm, weight approx.: 10 kg

This IMS Tattoo Assembly Line was manufactured in the years 2015 in the Netherlands. It is equipped with Phase 1 and Phase 2a processing technology for the assembly of the needle in shaft together with the cap and tension spring. It operates through the full process from needle load to output. See video for more. There is also a TEAM AUTOMATION BERLIN Tattoo Needle Testing System available to extend the assembly line with an additional testing phase.

Pressure:040 t throat:180 mm stroke:0 - 76 mm no. of strokes:145 /min distance table/ram, max. stroke up, adjustment up:350 mm table surface area:600 x 360 mm hole in the table:110 mm table height over floor:800 mm ram surface:270 x 175 mm ram adjustment:65 mm power capacity:2,2 kW weight:1,75 t Dimensions (WxDxH):1,1 x 1,2 x 2,1 m German Safety: permitted for manual loading:CE-sign clutch:pneumatic

Stone Disc Grinder is especially preferred by high-capacity coffee makers, spice makers and it is used for grinding Turkish coffee and also Black Pepper, Allspice, Cumin, Salt and Feed Grain. Capacity 75 kg/h.

Cylindrical mill. Two pairs of rolls, chilled water. Up to 1000 kg/h. After renovation.

Coffee grinder with extra rollers for a particularly fine grinding degree Power 500-1,500 kg coffee / hour (depending on grinding degree)

Power 800-1,500 kg coffee / hour (depending on grinding degree) For further photos, information or viewing appointments, please contact us by phone or in writing.

Schärf Coffee Grinder Type: Stark Xmill with steps (fine-coarse) Grinder Stainless steel cladding 230V 50Hz Height: 82cm Width: 22cm Depth: 36cm

Petroncini coffee grinder 1500kg per hour Was revised by actual owner Cooling system added by owner In perfect working condition Was exclusively used for Turkish Ibrik coffee (very fine) 2 sets of rolls very recently sharpened Inspection possible in operation Ready to work for many years ! Check my profile to see other roasting equipment

Petroncini grinder with a capacity of more than 200 kg per hour Was stored and not used for many years Unknown year Unknown condition Make your offer Can be refurbished as new with extra costs Type "The roasters agency" in the search bar to see other listings

2 Rolls coffee grinder with an output between 600kg and 1 ton per hour depending on the ground size Spare sharpened set of rolls included

PROBAT UW 801 MILL IN GOOD WORKING ORDER - SOLD WITH A PAIR OF SPARE CYLINDERS - WITHOUT ELECTRICAL CABINET - THE INSTALLED CYLINDERS ARE IN VERY GOOD CONDITION - CAPACITY: +/- 1000 K / H - PROVIDED FOR WATER COOLING (TO BE RENOVATED). IMMEDIATELY AVAILABLE

Keine Kühlung für Milch! Im Dauereinsatz - regelmäßig gewartet.

generally refurbished and modified; for roasting batches between 10 and 25 kg of green coffee; roasting time between 10 and 22 min.; heating with natural gas or propane including cooling filter, roasting cyclone with fan, new burner and new manual control with digital temperature display paint according to customer requirements extension with raw coffee supply and flue gas cleaning according to customer request