used IMA Double end tenoning machines

width 3200 mm Panel feed by chains, chain width 80 mm Feed speed max ? m/min, 4 kW Dogs every 11 cm. Equipment: 1+1 Jump scorer 1+1 Hogger 1+1 Jump shaper 1+1 Jump shaper 1+1 Jump shaper 1+1 Jump shaper

Manufacturer: IMA, Type: FBA/II/R80/660 F, Year: 1992, Control: IMATRONIC, Work piece width min-max mm: 220-2000, Min.-max. workpiece length in mm: 150, Min.-max. workpiece height in mm: 8-45, Working widht max mm: 2600, Machine with controlled dogs: yes, Cam distance mm: 320, Extended chain conveyor: 850, Scoring saw controlled: yes, kW / U/min: 1,5/6000, 1st milling unit kW / rpm: 4,4/6000, 2nd milling unit kW / rpm: 3,3/6000, 2. swivelling controllable: yes, 3rd milling unit kW / rpm: 3,3/6000, 3. swivelling controllable: yes, 7.Profilschleifaggregat Stk.: 4 pro Seite, 8.Flächenschleifaggregate Stk: 2, 9. Bürstenaggregat: 2, Aggregats per side - total: 9, Sawing unit: 1, Hersteller Prägestationen: 3, Folienprägestationen: 2, Prägehöhe mm: 5-30, Year :1992

End trimming unit IMA Type: 08.41 - pneumatic swivable

Manufacturer: Ima zweieinseitige Maschinen in Verkettung, Type: Combima I, Year: 1999 Überholt 2010, Control: IMA, Min.-max. workpiece length in mm: 150, Min.-max. workpiece height in mm: 10-60, Infeed table: Rollgang mit Drehstattion, Min-max edge thickness mm: 0,5-3,0, Min-max strip length mm: 300, Min-max protrusion of workpiece mm: 38, Min-max feed m/min: 8-40, Velängerte Kette mm: yes, Cam distance mm: ca.450, Premilling: yes, Profile milling: yes, Machining cracks: Zerspanen, Fine milling: yes, IR zone: yes, Coil magazine: 4-fach, Mitre stations: yes, Pre-milling: yes, Bevel milling: yes, Corner tracing type: MFA, 2 motors: yes, Servo copying: yes, Rolling chain: yes, Bonding part EVA: yes, Vertical grooves: yes, Grooves, slewable-controlled: yes, Radius scraper: yes, Flat scraper: yes, Servo copying: yes, Year :1999 Überholt 2010

Manufacturer: IMA, Type: Maschinenstrasse Combima, Control: IMA, Work piece width min-max mm: 1 Maschine 250-1500, Min.-max. workpiece length in mm: 2 Maschine 250-2600, Min.-max. workpiece height in mm: 10-50, Feeding: Ja, Machine no 1: yes, Angular transfer: yes, Machine 2: yes, Drilling machine no1: no, Destacking unit: yes, Edgeband thickness max mm: 3, Edgeband height max mm: 50, Nockenabstand mm: 850, Coil magazine: 6-fach, Feeding speed max m/min: 10-30, Premilling: yes, Strip magazin: no, Kantenmagazin: yes, Mitre stations: yes, Trimming saw: yes, Büdigfräsen: yes, radius milling: yes, Fasefräsen: yes, Contour milling type: MFA, Radius scraper: yes, Flat scraper: yes, Spraying device: yes, Maschine vorführbereit: yes, Year :2000

double-sided edge processing line, manufacturer: IMA, type: Combima PU/II/R75/1220/F/V/R3, year of manufacture: 1999, serial no.: 13286, control IMA Imatronic 100, working width max. approx. 1,500 mm, 1x milling, 2x form milling, mould gluing unit, 2x cross-cutting unit, flush milling unit, mould scraper blade, groove unit, 2 polishing units, outlet roller conveyor, L approx. 6,000 mm, transition bridge 8 stages, (award is subject to reservation, sum of bids 334-350 or collective bid of item 333 will be accepted after expiry of the Auction)

Description: Max. panel width 3300 mm Min. edge thickness 0.4 mm Max. edge thickness 3 mm Max. forward feed speed 30 m/min Conveyor Track with dogs , Pressure with rubber belt NO. PANEL SIZING / MILLING , Unit : scoring unit motor power : 4.4 KW r.p.m. : 6000 RPM NO. PANEL SIZING / MILLING , Unit : double chipper, top and bottom Constructor model : 75.30 NO. PANEL SIZING / MILLING , Unit : miller hogger NO. PANEL SIZING / MILLING , Unit : miller hogger Edge coil magazine , no. positions 2 glue pot for EVA hot melt glue , premelter for EVA hot melt glue , Roller set to press the edge , no. pressure roller 5 No. Edge Processing Units , Processing Unit : end trimming Constructor model : 08.412 no. motors : 2 Processing Unit : fine trimming to trim and round Constructor model : 08.055 no. motors : 2 Processing Unit : Corner rounding Constructor model : ...

IMA BFB MS300A collator and stretch bander for cartons Carton Size range: minimum 65 x 20 x 12 mm, max. 160 x 95 x 95 mm Bundle size range: minimum 65 x 80 x 30 mm, max. 180 x 320 x 160-210 mm (push-in width x depth x height) Maximum reel diameter 300mm, reel core diameter 70-76mm Includes discharge rake to remove bundles from the machine (prevents heating the product) Siemens S7-300 PLC with UniOP HMI Capacity up to 40 bundles per minute 6 bar compressed air Footprint 2865 x 1265mm approx. x 1945mm high Weight approx 1500kg.

Technical data (subject to change): Machine: Constant workpiece output from the chain path: 38 mm (incl. edge at edge thicknesses 0.3 - 3 mm) min. throughput width: 65 mm* *with a maximum workpiece thickness of 25 mm min. workpiece length in feed direction: 150 mm Basic height (upper edge chain track): 960 mm Workpiece: min. workpiece length: 150 mm min. workpiece width: 65 mm min. workpiece thickness: 8 mm workpiece thickness: 40 mm (with copy function) workpiece thickness: 60 mm (without copy function) Smallest workpiece: 150 mm x 150 mm, or 65 mm x 300 mm Lateral protruding coating material: 0 mm Edge material: paper, plastic and veneer min. height: 14 mm height: 65 mm Roll material: min. thickness 0.3 mm thickness 3.0 mm* *Veneer edges limited possible up to 1.0 mm cross-section 130 mm² min edge length 160 mm upper edge protrusion: 5 mm Equipment: - Driv ...

High-speed labeller for 2.25 ml Ypsomate Autoinjectors. Output: up to 250 pcs/min. Retrofit to Ypsomate Pro or to 1 ml size possible. Machine line consists of an automatic pallet management system for the autoinjectors packed on pallets in trays, unused.

Drilling capacity: 50 mm Throat: 230 mm Spindle taper: 42   Max. drill Ø steel:50mm Max. tap Ø:        M42M Stroke pinole:     230mm Throat:            375mm Column sleeve:     200mm Spindle Taper:     4ISO/Bt/Mk Speeds / ranges:   1032Rpm Table Length:      600mm Table Width:       600mm Power:             3kW Length:            610mm Width:             1020mm Height:            2450mm Weight:            950kg

Edge height max. 65 mm Edge thickness max. 20 mm Strip cross-section max. 20 x 55 mm Fixed workpiece protrusion in post-processing incl. Edge material 38 mm (max. edge thickness 8 mm) In the case of strips or edge thickness > 8 mm, the output is in of post-processing 30 mm + strip thickness Post-processing is then only possible with the following units: possible: cross-cut and milling unit 08.055 and grinding unit Feed speed 6 - 30 m/min. Roller support rail extendable up to 700 mm Machine length 9,300 mm IMATRONIC 121/01 with system software for operating the Edge banding machine Compact PC in industrial design Electronic height adjustment of the upper pressure Inlet ruler axis-controlled Milling unit 08.376 with 2 motors of 4.5 kW each, in the Working in sync or counter rotation Infrared emitters for workpiece edge preheating Gluing unit 283.151 ...

Manufacturer: IMA OBK, Type: OBK, Year: 1996, Premilling: yes, Profile milling: yes, Profil sanding: no, Edgeband thickness max mm: 60, Thickness of coiled edgeband max mm: 1, Panel length min mm: 300, Work piece thickness min mm: 100, Feeding speed max m/min: 5-30, Machine lenght mm: 11000, Pressure zone star: yes, Pressure zone exchange system: 4-fach, Strip magazin: no, Trimming saw: yes, Flush milling: yes, Scraper: yes, Buffing unit: 2 Stück, Glue system granulate/cartridge: granulat, Spraying device: yes, Noise enclosure: yes, Compressed air bar: 6, Maschine kann vorgeführt werden , Year :1996

Monoblock for filling and sealing bottles. Capacity: 6000 bottles/hour in 370 ml Capacity: 7500 bottles/hour in 200 m Built in 1987 - Machine refurbished by the manufacturer in 2004 with pharmaceutical qualification. Equipment included : NEM cap lifter Vibrating bowl Electrical cabinet Laminar flow box Filling tank + pump + heat exchanger + buffer tank before filling. 2 formats + spare parts available Machine controls : Detection of caps on bottles Fill level detection Minimum number of bottles (input) Max. number of vials (output) History, documentation and wiring diagram available; Spare parts available.

- Current format: capsule size 0 - 48 posts - Max capacity: 200,000 capsules / hour - Automatic checking weight - Year:? 2001 and full revamping in 2011 / 12 - spare parts available. - All documentation and pharmaceutical qualification files available

Used blister and cartoner by IMA type. C80/A81; New: 2000; Available formats: 1.PVC/ Al thermoformed dim. blister 83x56 with 10 tablets, cardboard box …60*18*86, 60*25*86, 60*35*86 60*45*86, Foil 176/183 2. Thermoformed PVC/Al dim. blister 83x56 with 6 tablets 3.PVC/Al thermoformed dim. blister 96x66 with 10 tablets cardboard box …70*18*104, 70*25*104, 70*35*104, 70*45*104, 70*58*104, Film 209/213

HORIZONTAL CARTONING MACHINE IMA, MODEL A94 Year of construction: 2002 Fully automatic continuous motion horizontal cartoner for blisters, with balcony structure. Features: - Centrally adjustable product chain - Automatic blister infeed system - Siemens PLC - Argus Laetus coder - GUK FA 21/4 leaflet folder and inserter - Stainless Steel construction - Full interlocked guarding - Manuals, technical documentation and drawings in English and Polish Suitable box sizes: length 55mm to 210mm, width 25mm to 110mm, height 12mm to 85mm. Manufacturer's suggested maximum speed output of 320 cartons per minute (last run at 280 cartons per minute). Machine size: 5100mm L x 1650mm W x 2100mm H Approximate weight: 3500kg

Autom. cartoning machine incl. autom. bottle feeder (from turntable Ø 800 mm), blister feeder from magazine, leaflet feeder for pre-folded leaflets etc. PLC: IDEC.

Automatic overwrapper. PLC: Siemens, type Simatic S7-300.

IMA BFB K150 horizontal intermittent motion cartoning machine for blisters, etc. carton size range min. 20 x 12 x 50 mm (AxBxC), max. 85 x 60 x 190 mm, reverse tuck closure, GUK FA21/4 Cartonac 91 leaflet folder from stack, Laetus Argus 6012 bar code reader for carton and leaflet, electrics 380V/3PH/50Hz, machine floor space approx. 300 x 1300 mm (LxW), machine height approx. 1950 mm, machine net weight approx. 1500 kg, capacity up to 120 cartons per minute

Machine with full equipment: Add Glue up to 15 mm Flat saws Preliminary vessels Chamfer milling Rounding threads and corner copying Grinding unit Flat and rounding drawing blade Smooth with return belt

Chain plates (used) Serial No.: IMA -with rubber plate and mounting bracket -Dimensions: 80 x 60mm -more than 100 PCs available Price per piece: 4,50 euro + VAT

Milling / Beveling aggregate Serial No.: IMA -for double-sided edge banding machine (1 Unit left right side page / 1 units)

The Solid wall pan , with no perforations , makes it possible to process all sizes and shapes of product without clogging . The shape , combined with the surface smoothness , bring a perfect mixing of the cores and a uniform distribution of the coating material . An exclusive , patented drying system . Two paddles immersed in the core bed guarantee that the drying air is conveyed directly through the tablet mass, thus avoiding swirls and turbulence inside the pan. Either blowing or exhausting paddles can be used, depending on the process requirements. e use of different sizes of paddles guarantees high flexibility in terms of pan working capacity. Spray guns : Both Sugar and Film spray guns can be easily fitted on the sliding support arm, which can be rapidly removed from the front door of the pan, allowing their calibration/adjustment and fast, safe cleaning and sanitizing operations. T ...

Glue tank with rollers for sanding machine IMA