used IEMCA Other Turning Machines

This IEMCA Master 80 Bar Feeder was manufactured in the year 2016. The machine is barely used. There are 2 units available of the same model available. Both bar feeder were connected to identical Index C200 (YOM 2016 with Unimag 4 interface). They have a bar capacity of 80mm. Bar feeder #1 is at 7,500 and Bar feeder #2 at 8,000 production hours. The Master 80 HF is recommended for frequent unloading (even multiple times a day) needs, catering to a wide range of bars (e.g., from Ø 15 to 80 mm), accommodating both hexagonal and square materials, and for those seeking the convenience of a loader without manual adjustments required.

was connected to Gildemeister GMC 20

Spindle circle 165 mm Interface Gildemeister GM 16 AC

Capacity: For bars from 5 to 42mm Maximum length: 4400mm Hexagonal bar diameter: 4.4mm - 36mm Storage capacity: 28 bars of 10mm diameter Advance speed: 750mm/sec. Return speed: 800mm/sec.

Used Iemca ts 560 p Bar feeder Visible in Italy sold as it is

Delivery ready Located near Brescia northern Italy Regione: Lombardia

type L21 80 x 3800 mm - single-storey warehouse Dimensions 4900 x 750 x 1700h mm - Weight 1440 kg Year 2008 Available January 2024

Manufacturer IEMCA Model Master 80 Year of manufacture 2016 Bar Feeder, very good condition

IEMCA model 33 lathe bar loader

Rod diameter 8 - 80 mm Rod length 1,000 - 2,100 mm Connection power 5 kVA Machine weight 950 kg

Max. bar length: 3000mm, weight: 900kg, the machine is wrapped in foil and not in use.

Bar diameter: 0 mm Bar length: 0 mm Number of bars loaded: 0   Technical data Bar diameter round up up to: 32 mm Length of bars max.: 3000 mm Voltage 50 Hz 3x: 400 Volt Machine´s weight about: 900 kg Overall dimensions machine: Length: 4000 mm Width: 800 mm Height: 1700 mm

Bar diameter: 0 mm Bar length: 0 mm Number of bars loaded: 0   Technical data Bar diameter round up: 5 mm up to: 65 mm hexagon up: 5 mm up to: 56 mm Length of bars max.: 3750 mm Execution: Horizontal Voltage 50 Hz 3x: 200 Volt Power: 2 kW Machine´s weight about: 1450 kg Overall dimensions machine: Length: 5840 mm Width: 732 mm Height: 950-1100 mm

Technical data Bar diameter round up: 3 mm up to: 25 mm Length of bars max.: 3200 mm Voltage 50 Hz 3x: 400 Volt Overall dimensions machine: Length: 4000 mm Width: 600 mm Height: 1600 mm

Rod diameter 65 mm rod length 3200 mm

Bar loader make Fabr. IEMCA type AS 325/32Machine -No: 87041309 Year 1987Rod sizes from: 3-25 mmBar length max .: 3210 mmMagazine capacity (eg 30 x 10 mm): 300 mmFeed rate: 200-600 mm / sec.Drive power: 1.0 kWWeight approx: 530 kgOutside dimensions approx: 4470 x 460 x 1500 mmused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

- For connection to multi-spindle automatic lathes - Stocking: Area magazine 4x 450 mm edition - Rod Ø: 4-52 mm (depending on the guide channel) - Ø guide channel: 44 mm - Rod length: approx. 3000-4200 mm - Dimensions LxWxH: 4600 x 750 x 1300 mm - Weight: approx. 850 kg

Loader applicable to all types of CNC lathes, with fixed or sliding head. The TS560 series automatic loaders are characterized by a very silent operation and a large capacity bar magazine. They can be connected to automatic and CNC lathes, with fixed and sliding headstock, and to any machine working the bar (transfer, cutting-off machines, presses, etc.) even with special profiles; they are particularly suitable where large quantities are required. The TS 560 P loaders are equipped with a magazine with 4 eclipsable overlapping shelves (max. Capacity 1800 mm.), L max [mm]: 3.300

Stock number: 3765 BAR FEEDER - LOADING MAGAZINE Manufacturer: IEMCA, Type: VIP 80 II - 16 Machine NO.: 0207370a01, Year of construction: 2007 Specifications: Max. Stang dia. 80 mm Min. Stang dia. 5 mm Stang length 1400 mm Length: 1900 mm, Height: 1500 mm, Width: 1000 mm, Weight: 520 kg

Was fitted on a Gildemeister Sprint 65

27 own barfeeds in stock or on arrival (Iemca-Lns-Top Automazioni) visit our website and ask for more details

Inv. Num. : 6976 Type: BOSS 545/E type 32L Producer: IEMCA Created: 2005 Parameters: Maximum rod length: 3200 mm Rod diameter: 5-45 mm Weight: 850 kg

Bar Loading Magazine/Tal AUTO 65-32 LxWxH approx. 5000x1000x1500mm Weight approx. 600 kg Control via CNC machine (was mounted on a Traub-CNC machine) B0doi8oziq Rods diameter approx. 5-65mm Pole length approx. 4 meters Height adjustment approx. 1000-1300mm Power supply 380 volts Max. feed travel approx. 4000mm Max. rod weight approx. 150 kg