used IBARMIA Column Type Drilling Machines

Drilling capacity: 40 mm Throat: 300 mm Spindle taper: 3   MACH-id    4102 MAKE        IBARMIA Spain TYPE         SX 32 YEAR        1996 SPECIFICATIONS Drilling capacity      32 mm Drilling capacity steel Ø   35 mm Drilling capacity cast iron Ø   40 mm Tapping M  18 Spindle taper Mk   3 Spindle diameter Ø  125 mm Spindle travel    150 mm Max. distance spindle - table   300 mm Floor / table area    400 x 420 mm Power       1.1 kW Spindle speeds / ranges      1450 Rpm DIMENSIONS Length       600 mm Width        1100 mm Height       2200 mm

Description: Column drill Serial number 545-V Table dimensions: 300 x 270 mm Vertical spindle travel: 120 mm 16 working speeds: 75-3360 Rpm Motor power 1.1 kW table surface area l x w : 300x270 mm, weight approx.: 300 kg, Approx. Onsite Dimension. (l x w x h): 600 x 700 x 1,950 mm

Prismatic column drill. Drilling capacity: 60mm. Table: 700x600mm. Vertical travel: 800mm. Taper Morse 4. Speeds: 9. (50-1.084) Motor power: 7,5cv.

Prismatic column drill. Ready for automatic drill of flanges, rounds... Drilling capacity: 70mm. Spindle pneumatic work cycle. Indexing table. Chip conveyor. Working area guarding. Year: 1998.

Boring power: 50,0 mm bore capacity in cast iron: 60,0 mm bore stroke: 230 mm thread dia.: bis M 36 M table surface area: 550 x 550 mm throat: 400 mm turning speeds: 54 - 1032 U/min morse taper: MK 4 feed: 0,1-0,2-0,3-0,4-0,5-0,6 U/min T - slots - width: 30 mm column diameter: 200 mm engine output: 4,0 kW weight: 720 kg range L-W-H: 600 x 1600 x 2450 mm Furnishing: - autom. Spindle feed by electromagnetic clutch - Switch for right / left rotation - Hardened and ground steel gears - Hand wheel for manual fine feed - Gear lubrication by autom. Oil pump - Coolant device in the machine base - machine light - rotating work table - Push button for EMERGENCY STOP - Height-adjustable chip protection hood with microswitch - CE marking The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Boring power: 60,0 mm bore capacity in cast iron: 70,0 mm bore stroke: 260 mm table surface area: 600 x 600 mm thread dia.: bis M 42 M throat: 420 mm turning speeds: 64 - 1210 U/min morse taper: MK 5 feed: 0,1-0,2-0,3-0,4-0,5-0,6 U/min column diameter: 220 mm T - slots - width: 30 mm engine output: 5,5 kW weight: 820 kg range L-W-H: 650 x 1600 x 2640 mm Furnishing: - autom. Spindle feed by electromagnetic clutch - Switch for right / left rotation - Hardened and ground steel gears - Hand wheel for manual fine feed - Gear lubrication by autom. Oil pump - Coolant device in the machine base - machine light - rotating work table - Push button for EMERGENCY STOP - Height-adjustable chip protection hood with microswitch - CE marking The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 50 mm throat: 400 mm bore stroke: 230 mm bore capacity in cast iron: 60 mm threading:: M 36 spindle taper: MT: 4 number of spindles: 9 spindle turning speed range: 54 - 1032 U/min feed steps: 6 spindle feeds:: 0,1-0,2-0,3-0,4-0,5-0,6 mm/U table-size: 550 x 550 mm column diameter: 200 mm weight of the machine ca.: 720 kg dimensions of the machine ca.: 1,2 x 0,6 x 2,6 m STANDARD EQUIPMENT: - Feed with autom. electromech. clutch - Scale with adjustable drilling depth - Digital speed display - threading device - automatic tool ejector - thermomagnetic main switch - Push button for EMERGENCY STOP - Switch for clockwise / anti-clockwise rotation - Switches for high and low engine speeds - fixed table (MF) - Integrated coolant device - machine light - Height-adjustable chip protection disk with microswitch - CE marking OPTION: swiveling table size 480 x 480 m ...

bore capacity in steel (diameter): 40 mm throat: 360 mm bore stroke: 200 mm bore capacity in cast iron: 50 mm threading:: M 27 spindle taper: MT: 4 number of spindles: 9 spindle turning speed range: 61 - 1169 U/min feed steps: 4 spindle feeds:: 0,1 - 0,2 - 0,3 - 0,4 mm/U table-size: 550 x 550 mm column diameter: 175 mm weight of the machine ca.: 610 kg dimensions of the machine ca.: 1,2 x 0,6 x 2,5 m STANDARD EQUIPMENT - Hardened and group high quality steel gears - Speed plate and selecting levers on head - Gear box lubrication by automatic pumps - Machine base with coolant tank and pump - Worklight - MGI Rotating and tilting table - Automatic feed and cut-off by electromagnetic clutch - Front hand wheel for fine feed work - Depth scale and adjustable depth stop - Automatic tool ejector - Electric equipment integrated on machine’s head - Emergency STOP push button - Spindle reversing  ...

bore capacity in steel (diameter): 25,0 / 30,0 mm throat: 150 mm bore stroke: 120 mm threading: M18 / M22 spindle taper: 3 MK table:: 300 x 270 mm turning speeds: 200 - 4.000 U/min column diameter: 100 mm total power requirement: 0,75 / 1,1 kW weight: 170 kg range L-W-H: 800 x 500 x 1400 mm ** from a training workshop (!!) ** New price approx. 4.700 euros Furnishing: - robust bench drill with V-belt drive - Clamp / relax using a quick release lever - stepless speed adjustment - digital speed display - EMERGENCY OFF push button at the front - stable feed handle - stable quill for tool mounting - Thread cutting device - Right / left running of the work spindle - Pole changing motor - manual spindle feed - Height-adjustable work table, using a hand crank - adjustable drilling depth stop The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Drill press, bench drill, column drill, pillar drill -Manufacturer: Ibarmia, column drilling machine type 40 TF / C -Motor: Siemens 1.1 kW -Speeds: 104 - 1450 rpm, right-left rotation -Table size: 360 x 300 mm, travel 600 mm -Spindle mount: MK3 -Spindle stroke: 150 mm -Feed: automatic -Projection: 300 mm -Pillar Ø: 125 mm -Coolant device -Dimensions: 480/680 / H2220 mm -Weight: 358 kg

Drill press, bench drill, column drill, pillar drill -Manufacturer: Ibarmia, column drilling machine type 40 TF / C -Motor: Siemens 1.1 kW -Speeds: 104 - 1450 rpm, right-left rotation -Table size: 360 x 300 mm, travel 600 mm -Spindle mount: MK3 -Spindle stroke: 150 mm -Feed: automatic -Projection: 300 mm -Pillar Ø: 125 mm -Coolant device -Dimensions: 480/680 / H2220 mm -Weight: 358 kg

Equipped with Style controlled cross table. Machine working, the original monitor is defective.

The machine is in good technical condition, after agreement the possibility of testing. Machine parameters: Feed in the X axis 1600 mm Feed in the Y axis 800 mm Feed in the Z axis 900 mm Angle of rotation +/- 105 ° Maximum speed 12000 rpm Number of tools in the magazine: 24 Dimensions of the work table: 2000 x 850 mm. It is designed for customers where it requires a vertical spindle as well as high speed and is the perfect solution with all the benefits it provides: - High speed range and high torque - High position dynamics and high acceleration in the axes - Limited working space: maximum comfort and safety - Vertical protection up to the roof in the X axis: optimizes the removal of chips and coolant - The upper cover of the working area with the roof allows access by a bridge crane - Tool change and tool change arm in the working area. The machine accessories include a wall dividing  ...

Description: Machine number: 1090-C Speed: 191 - 1169 rpm Drilling depth: 200 mm Table dimensions: 390 x 390 mm weight approx.: 400 kg, Approx. Onsite Dimension. (l x w x h): 1,000 x 500 x 2,200 mm

Ibarmia ZVH 45/L 1600 moving column machining centre :::SPECIFICATIONS::: CNC Model: Siemens - CNC Version: 840 D - Tool Holder: ISO 40 - Spindle Power: 18.5Kw Spindle speed: 10000 - Number of tools: 60 - X axis stroke: 1600mm - Y axis stroke: 800mm - Z axis stroke: 940mm Rapid feeds for linear axes X Y Z: 30m/min Fourth axle head: yes Fourth Axis Head Type: Continuous Rotary Table: Yes Rotary Table Type: Continuous Table size: 800mm High refrigerant pressure: yes Chip conveyor: belt conveyor Machine equipment: Optical scales :::D DIMENSIONS AND WEIGHT::: Length: 6750mm Width: 4200mm Height: 3600mm

This IBARMIA ZV 58/L7000 EXTREME Vertical Machining center was manufactured in the year 2017 and has under 4500 production hours. It is equipped with a HEIDENHAIN TNC 640 HSCI control unit and has 3 axis. The machine has a spindle speed of 16000 rpm and a HSK 63 spindle tool taper. It comes with 60 tool slots as well as a PDF (FR) with technical benefits.

travel -x axis: 6.000 mm travel -y axis: 1.000 mm travel -z axis: 800 mm control: Heidenhain - iTNC530 distance vertical spindle / table: 1.000 mm table-size: 3.300 x 1.050 mm number of T-slots: 7 T-slot - width: 125 Travelling column milling machine | IBARMIA - ZV-58 / L6000 Further information / scope of delivery: - Clamping system mounted on the table (see pictures) - Normal T-slot table installed under clamping system - Renishaw probe The machine is in a well-maintained condition. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: ZV-58 L6000 | ZV-58 / L 6000 | ZV58L6000 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

travel -x axis: 6.000 mm travel -y axis: 1.000 mm travel -z axis: 800 mm control: Heidenhain - iTNC530 distance vertical spindle / table: 1.000 mm table-size: 3.300 x 1.050 mm number of T-slots: 7 T-slot - width: 125 Travelling column milling machine | IBARMIA - ZV-58 / L6000 Further information / scope of delivery: - Clamping system mounted on the table (see pictures) - Normal T-slot table installed under clamping system - Renishaw probe The machine is in a well-maintained condition. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: ZV-58 L6000 | ZV-58 / L 6000 | ZV58L6000 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

travel -x axis: 6.000 mm travel -y axis: 1.000 mm travel -z axis: 800 mm control: Heidenhain - iTNC530 distance vertical spindle / table: 1.000 mm table-size: 3.300 x 1.050 mm number of T-slots: 7 T-slot - width: 125 Travelling column milling machine | IBARMIA - ZV-58 / L6000 Further information / scope of delivery: - Clamping system mounted on the table (see pictures) - Normal T-slot table installed under clamping system - Renishaw probe The machine is in a well-maintained condition. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: ZV-58 L6000 | ZV-58 / L 6000 | ZV58L6000 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

travel -x axis: 6.000 mm travel -y axis: 1.000 mm travel -z axis: 800 mm control: Heidenhain - iTNC530 distance vertical spindle / table: 1.000 mm table-size: 3.300 x 1.050 mm number of T-slots: 7 T-slot - width: 125 Travelling column milling machine | IBARMIA - ZV-58 / L6000 Further information / scope of delivery: - Clamping system mounted on the table (see pictures) - Normal T-slot table installed under clamping system - Renishaw probe The machine is in a well-maintained condition. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: ZV-58 L6000 | ZV-58 / L 6000 | ZV58L6000 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Magnetic drilling machine, magnetic drilling machine Core hole drilling machine, Metal core hole drilling machine DR. BENDER Type EK 323 Masch No. 180543 Year of construction approx. 1988 Drilling capacity 23 mm Spindle holder MK 2 Spindle speed 160 / 400 / 1250 rpm. Magnet 215 x 105 mm Drilling unit 220 Volt, 50 Hz, 1025 Watt E-magnet 220 Volt, 50 Hz, 65 Watt - Spindle speed via 3 gear stages - Left and clockwise rotation - E-magnet KOCH, type KL32/6 - Drill head height adjustment guided in a linear guide - manual expulsor - Drill stand rotatable on magnetic base, clamping via toggle screw Dimensions L x W x H 680 x 380 x 630 mm Weight 35 kg good condition; used

Boom drilling machine KNUTH type KAB16 Masch. No. 44715 Year of construction 1987 Drilling capacity in steel 16 mm Drilling capacity max. 23 mm Spindle holder MK 2 Pinol stroke 80 mm Projection 550 mm Spindle speed 290 - 2330 rpm 12 steps Clamping surface 650 x 310 mm Distance between drilling spindle Clamping surface max. 890 mm Column diameter 102 mm Motor power 0.55 kW Mains connection 400 volts, 50 Hz Spindle speed via 12 V-belt steps - Drill head height adjustment via hand crank - Drill head swivels +/- 90- Drill head rotatable on the column and on the boom arm Space requirement L x W x H 1030 x 400 x 1000 mm Weight 140 kg very good condition; used

Drilling machine, column drilling machine, pillar drilling machine, pillar drilling machine, multi-spindle head, multi-spindle drilling head, drilling gear -with two-spindle drilling head Manufacturer Sigloch Schrieder Type: V602 -Drive power: 1.02/0.88 kW -Drill distance adjustable: 18-110 mm -Max. Drill: 2x Ø 6 mm -Table size: 275 mm -Spindle mount: MK3 -Projection: 220 mm -Speeds: 100-2900 rpm -Columns: Ø 100 mm -Spindle stroke: 75 mm -Transmission -Dimensions: 900/400/H1910 mm -Weight: 230kg

Drilling capacity in steel/GG: 23 mm spindle retainer: 2 MK projection: 300 mm table size: 300 x 300 mm Quill stroke: 100 mm spindle speeds: 190-1500 rpm drive motor: 380 V, 0.5/0.75 kW space: 410 x 670 x 1950 mm weight: 180 kg

Drilling capacity in steel/GG: 50/60 mm spindle retainer: 5 MK projection: 400 mm table size: 700 x 600 mm Quill stroke: 275 mm spindle speeds: 32-1030 rpm feeds: 4: 0.1 ? 0.4 mm drive motor: 380 V, 2.2/3.7 kW space: 700 x 1200 x 2700 mm weight: 1240 kg