used HÜLLER HILLE Numerically Controlled Machining Centres

x-travel: 630 mm y-travel: 550 mm z-travel: 500 mm total power requirement: 10 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Pallet length: 0 mm Pallet width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Number of pallets: 0   Positions ATC: 0   CNC Brand: 0 CNC Model: 0 Control: SIEMENS SINUMERIK 840 D Technical data Number of axis total: 4 Longitudinal travel (X-axis): 700 mm Transversal travel (y-axis): 630 mm Vertical travel (z axis): 700 mm Dimension of the workpice: Width: 700 mm Table load max.: 500 kg Table divisions (B): 0.001 ° Table speed: 30 rpm Holding torque A-axis: 4000 Nm Tilting moment: 8000 Nm Pallets: number: 10 Length: 500 mm Width: 500 mm Maximum workpiece weight: 750 kg Time of changing palets: 7 sec Tool changer: Number of tools: 130 Tool diameter max.: 80 mm Diameter with free adjacent pockets: 150 mm Tool lenght: 350 mm Max. tool-weight: 10 kg Time of tool changing: 2.5 - 4.5 sec Average chip-to-chip time: 4 sec Spindle nose SK: 40 DIN69871-A40 Spindle speeds: stepl ...

Matrix magazin Number of tools : 128 0.001 table index Reneshaw probe Fanuc control unit Table size : 500*500 X Axis : 700 mm Y Axis : 630 mm Z Axis : 700 mm Double pallets

The control system has been changed. The ballscrews have just been replaced with the originals. Since there was no room left due to the purchase of a new machine, it was forced out of the factory. It is ready for use after the electrical connection is made. Having a double table is a great advantage in terms of production. X axis travel 800 mm Y axis travel 630 mm Z axis travel 800 mm Turntable (4th axis) yes CNC VISEL Table length 630 mm Table width 500 mm Maximum workpiece weight 800 kg Pot count 60 Spindle taper ISO 50 Maximum spindle speed 9000 rpm Spindle motor power 37 kW ------------------- Weight 12500 kg Active working hours Plugged in working hours good condition In norms --------- Status visible (currently unplugged)

x-travel: 800 mm y-travel: 800 mm z-travel: 800 mm Control: Sinumerik 840 D b-axis: 360 ° turning speeds: 16.000 U/min rapid traverse: 60 m/min tool taper: HSK 63 tool magazin:: 144 Plätze total power requirement: weight of the machine ca.: 17 t dimensions of the machine ca.: 7,4 x 3,35 x 3,7 m Pallet changing device: 180 ° NC rotary table Set-up station Full-space enclosure with workspace rinsing and manual rinsing gun Coolant system with IKZ Coolant pump 20-70 bar Coil suction filter 50mü Double chamber filter 60mü for internal coolant supply incl. prewarning Chip conveyor in scraper belt design Renishaw measuring system with probe Tool breakage control parallel to machining time (mech. probe) in tool magazine Incl. fixtures / clamping angle The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Clamping plate with T-slots and cross table, plate field, welding table, welding table, plate boring machine, T-slot plate, pallet changer -T-grooved plate comes: from a Huller Hille milling machine type nb-h 70 -Width: 475 mm -Length: 500 mm -Height: 68 mm -Plate: is solid -Groove width: 12 mm -Dimensions: 500/475/H68 mm -Weight: 90 kg

CNC Vertical Lathe Make: Hüller Hille Type: VDM 120 – 11 Year of construction: 2002 Control: Siemens 840 C Max. turning diameter: 1300 mm Max: Circulation diameter: 1400 mm Axle stroke: Z-1000 mm X-1500 mm Dimensions to top edge of spindle: 940 mm Bearing Ø in front bearing: 710 mm Max. speed: 500 rpm Max. torque: 30 000 Nm Main spindle motor AC max.: 100/40% ED 76/115 kW Chip diameter: 1600 mm Feed intake/centeringØ: 790 mm Max. feed force Z/X axis: 25000 N Axis speed Z-X-axis: 0.01 – 14000 mm/min Z-X-Axis Displacement Measuring System: Angle Position Sensor/Linear Measuring System Tool carrier: Disc turret with B-axis Tool holders: Modular system UTS 50 Machine weight: 30 000 kg

Control: Siemens 840 C Max. turning diameter: 1300 mm Max: Circulation diameter: 1400 mm Axle stroke: Z-1000 mm X-1500 mm Dimensions to top edge of spindle: 940 mm Bearing Ø in front bearing: 710 mm Max. speed: 500 rpm Max. torque: 30 000 Nm Main spindle motor AC max.: 100/40% ED 76/115 kW Chip diameter: 1600 mm Feed intake/centeringØ: 790 mm Max. feed force Z/X axis: 25000 N Axis speed Z-X-axis: 0.01 – 14000 mm/min Z-X-Axis Displacement Measuring System: Angle Position Sensor/Linear Measuring System Tool carrier: Disc turret with B-axis Tool holders: Modular system UTS 50 Machine weight: 30 000 kg The machine is still energized. Viewing possible at any time by arrangement.

x-travel: 800 mm y-travel: 630 mm z-travel: 800 mm Control: Siemens type: 840 D size of pallet: 500x630 mm numbers of pallets: 8 : 360 ° turning speeds: 6000 U/min Table load: 800 kg spindle taper ISO: 50 Tool changer: Pos. chip conveyor: Feed: 1-36000 mm/min Cooling through the spindle: 50 bar total power requirement: kW weight of the machine ca.: 19,5 t dimensions of the machine ca.: 8x7x4,2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Internal threading machine HÜLLER type UG8 Masch. No. 626 0376 Year of construction approx. 1970 Cutting capacity M 8 in steel M 9 in cast iron M 10 in brass projection 200 mm Table size 270 x 270 mm Spindle speed 700 ? 1000 - 1400 rpm 3 stages Motor power 0.3 kW Mains connection 380 volts, 50 Hz spindle speed via gearbox with three gear stages - Thread pitch via interchangeable wheels, machine equipped with interchangeable wheels for 0.5 / 0.7 / 1 / 1.25 mm pitch - quick-release chuck RÖHM 1 - 10 mm - el. Foot switch for triggering - manual head height adjustment via crank Space requirement L x W x H: 650 x 430 x 1200 mm Weight 190 kg good condition; used

Ref. -No.: 10335 Manufacturer: HÜLLER HILLE Year of construction: 2008 Type of control: CNC Control: Sinumerik 840D pl Storage location: Halberstadt Country of origin: Germany X-Travel: 1000 mm Y-Travel: 800 mm Z-Travel: 800 mm B-Axis: 360 ° Machine length: 9500 mm Machine width: 4500 mm Machine Height: 3500 mm Distance spindle center - table: 150 mm Table Dimensions (Lengthxwidth): 500 x 630 mm Table Load: 800 kg Max. Workpiece Weight: 40 kg Max. Tool Length: 650 mm Max. Tool Diameter: 325 mm Workpiece Diameter At Full Load: 100 mm Tool Taper: HSK - 100 Spindle Speed: 0 - 12000 RPM Rapid Traverse: 60 m / min Further information: Coolant system = 1250 l

This HÜLLER HILLE NBH 135 Speed Horizontal Machining centre was manufactured in the year 2004 in Germany. It is equipped with a Sinumerik 840d control unit. It is included with a double chamber filter 60mü for internal coolant supply (advance warning). The machine disposes of a chip conveyor in scraper belt design, a Renishaw measuring system with measuring probe and tool breakage control parallel to production time (mechanical button) in the tool magazine incl. devices and clamping angles.

Besides used, reconditioned separators and decanters of trademarks of GEA Westfalia Separator, Flottweg and Alfa Laval delivers more centrifuge designs, two fluids of different densities used for the drying of solids, the clarification of liquids or the simultaneous separation - hence separating centrifuge - Centrimax. Also these industrial centrifuges are by Centrimax, overhauled, with a new plc and delivered with a mechanical warranty.

Besides used, reconditioned separators and decanters of trademarks of GEA Westfalia Separator, Flottweg and Alfa Laval delivers more centrifuge designs, two fluids of different densities used for the drying of solids, the clarification of liquids or the simultaneous separation - hence separating centrifuge - Centrimax. Also these industrial centrifuges are by Centrimax, overhauled, with a new plc and delivered with a mechanical warranty.

Robust strong bench drilling machine Manufacturer: HILLE works type: BN 10 No. 2/23654 suitable for floating drilling, at the time a speed via pulley Engine power: 2,2 KW 380 volt 50 Hz 1440 RPM Engine type: Baucknecht R 2.2/4-71 Column diameter: 110 mm boring Quill: 60 mm Stroke: 100 mm Throat depth: 200 mm Max Entfern.Tisch Chuck: approx. 320 mm Dimensions: approx. 500 x 830 x 850 mm Equipment: Keyless chuck right off: 0-10 mm

Manual screw press Hiller & Lutz Hilou HP 80-crushing force of 80 tons -The maximum diameter of 1200 mm -Size tables 400 400 mm -Diagonal lubrication lubrication grooves in T-shaped -Weight 1750kg

Feed sled unit hydraulic, detto

Technical data: -Material thickness 1.25 mm -maximum throat depth 180 mm -Roller Center distance 63 mm -maximum thickness at 40 kg / mm² strength 1.25 mm -Working speed approx. 6 + 12 m / min -Drive: 400 V / 0.7 / 0,85 kW - space requirement approx. B 550 x H 1250 X 1000 mm -Weight approx. 120 kg -with: - E - foot switch

+++ ATTENTION - PRICE DROP!!! +++ Prices are rising, ours are falling!!! +++ Our prices are reduced by 50% now, +++ due to warehouse restructuring!!! +++ Also, consider taking a look at our other offers in stock. Two-pillar Manual Spindle Press Hiller & Lutz HILU HP 70 manufacturer: Hiller & Lutz type: HILU HP 70 mach.-Nr.: 1047 year of construction: ??? comm.-Nr.: 3990300/009 stock-nr.: 1885 +++ Regular Price: 2.650,- € > Reduced Price: 1.325,- € BN +++ All prices are shown without taxes (net price) Technical Data (According to manufacturer) pressure: ca. 25 t spindle diameter: 70 / 140 mm width between columns: 350 mm max. height between table and plunger: 300 mm spindle hub max.: 220 mm table surface (width x depth): 300 x 300 mm pass-through hole in table: Ø 80 / 120 mm mortise in plunger: Ø 40 mm weight: ca. 550 kg standing area ...

Hydraulic toggle quick spindle striking press make HILU HILLER & LUTZType KNP 100 C machine -No: 1712 built in 1988Press force: 100 tWork distance from UT: 8 mmStrokes per minute: 70Ram stroke max.:0 - 120 mmRam adjustment: 80 mmInstallation height: 480 mmDischarge: 450 mmTable surface: 800 x 810 mmPlunger surface: 700 x 400 mmDiarrhea opening in the table: 200 mmAnvil plate: 200 x 50 mmDrive power: 18.5 kWDimensions L x W x H approx: 1200 x 1800 x 3000 mmWith- UV for manual inlay work- Footswitchvery little used, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Universal motorized folding machine make STÜCKMANN + HILLEN type AWR / M 2000/2Machine -No: M 05769061, year of construction 1976Working width: 2050 mmMax. Sheet thickness: 2.0 mmlargest passage: 3100 mmOpening width of the upper beam: 250 mmOpening width of the lower beam: 105 mmOpening width of the bending beam: 105 mmlargest opening width: 200 mmDrive power: 0.75 / 3.0 kWWeight: 2850 kgExternal dimensions: 3900x1000 x 1700 mmWith- driven upper, lower and bending cheek- Footswitchused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

sheet width: 3050 mm plate thickness: 2,00 mm distance between columns: mm stroke: 250 mm bending beam adjustment: 80 mm total power requirement: kW weight of the machine ca.: 5 t dimensions of the machine ca.: 4,35 x 2,50 x 1,60 m • CNC-controlled backgauge 1000mm • NC control Midomat 2000 • Bending rail: 20mm • 45 ° sharp rail The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Swivel bending machine, rotary bending machine, sheet metal bending machine.

Rotational speed: 90-710/min, connected load: 12kW, can be inspected.

Prior sale reserved - errors possible Internal Reference Number: D-1143-2