Category: 206 presses / Veneering presses
Latest update: 07.07.2023 add to watchlist
approved
dealer
item-No.: 161816083
New in: 1997

used

check Seller: MTT-Maschinenhandel Maschinenteufel
Location: Land-at

add to watchlist

• 120 tons total pressing force • Pressing area 3,000 x 1,350 mm • With patented, thermostable electric heating plates with automatic temperature control system • Connected load of the heating plates with economy circuit 10.6 kW • Connected load of the hydraulics 2.2 kW • in 6-cylinder version Ø 85 mm • Lockable main switch • Push-button control • Stop button • Safety ripcord, safety edge • Timer with automatic opening and acoustic signal • Stroke = opening 400 mm • Infinitely adjustable stroke limitation • 2-stage hydraulics with automatic pressure follow-up • Compact hydraulic power unit mounted maintenance-free in the oil tank • Teflon bronze guides in the cylinders • Hard chrome-plated steel pistons • Heavy rack and pinion compensation for synchronous table movement • fully open on four sides • Economy circuit installed as s ...

Category: 206 presses
Latest update: 29.03.2024 add to watchlist
approved
dealer
item-No.: 163677348
New in: 2001

used

check Seller: Innovac GmbH
Location: Deutschland Land-de

add to watchlist

Working surface: 2150x1150mm, pressing height: 300mm, pressing force: 50t, connected load: 2.4kW, length: 2500mm, width: 1150mm, weight: 1.8t.

Category: 211 veneer machines
Latest update: 29.03.2024 add to watchlist
approved
dealer
item-No.: 163677388
New in: 1997

used

check Seller: Innovac GmbH
Location: Deutschland Land-de

add to watchlist

Working width: 800mm, nominal current: 2A.

Category: 204 grinding machines
Latest update: 28.11.2023 add to watchlist
approved
dealer
item-No.: 152318187

used

check Seller: MATEC system+technik GmbH
Location: Land-ch
Price: VB 1.100 € add to watchlist

Tablebelt grinding machine Höfer Format: 2.50 x 1.20 m Engine: 4 kW L x W x H: 3.2 x 1.6 x 1.7m Weight approx. 680 kg The machine is in good condition, ready for operation. Changes, mistakes, intermediate sale reserved ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Category: 204 grinding machines / Belt grinders
Latest update: 09.10.2023 add to watchlist
item-No.: 162573965

used

Seller: Voglauer Gschwandtner & Zwilling GmbH
Location: 5441 Abtenau Land-at

add to watchlist

Bench belt sander Höfer Motor 4.2KW format 2.50 x 1.20 meters

Category: 206 presses / Veneering presses
Latest update: 02.01.2024 add to watchlist
approved
dealer
item-No.: 28468886
New in: 2005

used

check Seller: COLOMBO EREDI
Location: Land-it

add to watchlist

Ironing Pressing Line composed by In feeding Belt System Hot Press Cold Press Out Feeding Belt System

Category: 206 presses / Hydraulic veneering presses
Latest update: 05.07.2022 add to watchlist
approved
dealer
item-No.: 68651929

used

Location: Land-it

add to watchlist

HOT PRESS type COLOMBO REMO HPC 8 / 160 second hand WITH SOLID STEEL PLATES Heavy-duty construction Hot water heating via a electric system on the back of the machine , not any connection needed , everything is included on the machine Total Kw for heating 25 Solid steel plates size mm. 3450 x 1400 n.08 pistons diam.mm. 90 max. thrust Ton. 160 specific pressure max. kgs.5 / cm2 opening mm. 660 emergency perimeter rope overall dimensions cm. 4500 x 2000 x 2700 H weight kgs. 8500

Category: 206 presses / Hydraulic veneering presses
Latest update: 04.05.2022 add to watchlist
approved
dealer
item-No.: 125465311

used

Location: Land-it

add to watchlist

HOT PRESS Type KOLMAG useful size mm. 3000 x 1300 open mm. 450 n.06 cylinders volt. 380/50 weight : kgs. 4000 heating plan by water

Category: 206 presses / Veneering presses
Latest update: 02.01.2024 add to watchlist
approved
dealer
item-No.: 145526214

used

check Seller: COLOMBO EREDI
Location: 20900 MONZA Land-it

add to watchlist

Working Sizes: 1300 x 3500 mm

Category: 211 veneer machines / Veneering presses
Latest update: 28.11.2023 add to watchlist
approved
dealer
item-No.: 149043929
New in: 1978

used

check Seller: MATEC system+technik GmbH
Location: Land-ch
Price: VB 1.590 € add to watchlist

Veneer press Leopida Format: 2300 x 1000 mm Plates with hot water heating L x W x H: 2300 x 1100 x 2000 mm Weight approx. 2000 kg Built in 1978 The machine is in good condition, ready for operation. Changes, mistakes, intermediate sale reserved ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Category: 206 presses / Veneering presses
Latest update: 11.03.2024 add to watchlist
approved
dealer
item-No.: 160179125

used

check Seller: Maschinen-Kaul GmbH & Co.KG
Location: 40549 Düsseldorf Land-de

add to watchlist

see photos

Category: 206 presses / Hydraulic veneering presses
Latest update: 30.01.2024 add to watchlist
item-No.: 160244777
New in: 1989

used

Seller: ENO Mebli LTD
Location: Land-ua
Price: 20.000 € add to watchlist

Hydraulic press for bent glued parts Tuma FP120 Сharacteristic Table size, mm - 1400х600 Maximum opening size, mm - 1000 Number of upper cylinders, pcs - 2 Number of side cylinders, pcs - 2 Diameter of cylinders, mm - 160 Working pressure, Bar - 180-190 Year of manufacture - 1989

Category: 206 presses / Veneering presses
Latest update: 29.02.2024 add to watchlist
approved
dealer
item-No.: 160734876

used

check Seller: FHU Mateusz Guzik
Location: 34-23 JUSZCZYN Land-pl

add to watchlist

Veneering press OMC PL 105 LC 30/13 Water Work surface 3000x1300mm Opening width 400mm 6 cylinders with a diameter of 85mm Total pressure 105T Maximum heating temperature 85 degrees Control system logic contorl Machine control from touch panel readings Temperature, pressure force, shelf opening time, loading area calculator, programming of gluing processes Power 21KW CE Certificate Production 2023 Machine available on request New machine Net price

Category: 206 presses / Veneering presses
Latest update: 20.10.2023 add to watchlist
approved
dealer
item-No.: 161283503

used

check Seller: Sixt Holzbearbeitungsmaschinen GmbH
Location: Land-de

add to watchlist

Veneer press OTT JU 65 Pressing area 2500 x 1100 mm 4 cylinders Electric heating Machine is FUNCTIONAL From location Upper Austria fixed price NET € 4,500.0

Category: 206 presses / Veneering presses
Latest update: 13.11.2023 add to watchlist
approved
dealer
item-No.: 161436932

used

check Seller: Artuso Trading & Tech s.r.l.
Location: 35040 Roveredo di Guà (VR) Land-it
Price: 4.000 € add to watchlist

Hot press - LEOPIDA 2500x1300 Top size max 2500x1300 mm compartment opening max 330 mm n. 4 pistons diameter 115 mm each max pressure approx. 5 kg/cm2 Hydraulic power unit engine 2 hp Transport dimensions 340x140x180h cm weight 3400 kg Verified operation (video available on request)

Category: 206 presses / Veneering presses
Latest update: 11.03.2024 add to watchlist
approved
dealer
item-No.: 161742044
New in: 1968

used

check Seller: Maschinen-Kaul GmbH & Co.KG
Location: Land-de

add to watchlist

Press pressure up to 900 KN Hint: without ripcord

Category: 206 presses / Veneering presses
Latest update: 03.08.2023 add to watchlist
approved
dealer
item-No.: 162106381
New in: 1987

used

check Seller: MTT-Maschinenhandel Maschinenteufel
Location: Land-at

add to watchlist

Dimensions: 2,200 x 1,100 mm heating plate size Gold anodized heating plates 400 mm table opening height 4 hydraulic cylinders 50 tons of pressing pressure Stroke limitation Automatic opening Electrical opening and closing of the press table

Category: 211 veneer machines / Veneering presses
Latest update: 11.01.2024 add to watchlist
approved
dealer
item-No.: 162284248
New in: 1979

used

check Seller: Ermaier Holzbearbeitungsmaschinen
Location: Land-de
Price: 6.900 € add to watchlist

Veneer press - School press - Experimental press BÜRKLE U40 built 1979 Ges. Power: 6.25 kW Nominal operating current: 14.5 A Power per heating plate: 2,750 W Plate size: 120 x 80 cm Electric Aluminum Heating Plates max. temperature: 120° C Opening width: 40 cm 4 hydraulic cylinders each with a diameter of 70 mm Nominal surface pressure: 4 kp/cm² max. surface pressure at 75% surface design: 5.5 kp/cm² Operating pressure: 260 bar Circumferential safety ripcord (emergency stop) Automatic opening (automatic opening after the preset time has elapsed) Press frame in dismountable design Weight: 1,350 kg Machine dimensions (approx. dimensions): L 165 cm W 96 cm H 173 cm School machine - The machine comes from a school training center.

Category: 211 veneer machines / Veneering presses
Latest update: 05.03.2024 add to watchlist
approved
dealer
item-No.: 162324097
New in: 1972

used

check Seller: Passform Holztechnik GmbH
Location: 32584 Löhne Land-de

add to watchlist

Continuous press Manufacturer: Wemhöner Model: VSF Year of construction: 1972 Panel dimensions: 3600 x 2200mm Heating medium: Oil Feeding Destacking Total length approx.: 12.000mm

Category: 206 presses / Veneering presses
Latest update: 20.10.2023 add to watchlist
approved
dealer
item-No.: 162660200

used

check Seller: TOMESANI Srl
Location: 22063 Cantù - COMO Land-it

add to watchlist

Code: 0578 Brand: SORMEC 2000 - ITALY Model: 10000 - Norme CE Automatic cold press for panels, polyurethane foam, industrial shed doors, perimeter walls, foamed panels, insulation panels, laminates and various - CE standard Technical data: Working dimensions mm 10000 x 1500 Workpiece passage mm 2000 Opening mm 1000 Height of roller table mm 500 Motorised roller conveyor for workpiece feed with possibility of forward/backward movement N° 18 pistons diameter mm 70 N° 2 hydraulic power unit Pistons opening/closing selector Pressing timer Safety protection nets Power Kw 10,3 Compressed air 7 bar Overall dimensions: mm 10500 x 2300 x 3300 h Weight kg 19000

Category: 206 presses / Veneering presses
Latest update: 09.01.2024 add to watchlist
approved
dealer
item-No.: 162831214

used

check Seller: MATEC system + technik GmbH
Location: Land-ch
Price: 3.100 € add to watchlist

Veneer press Bürkle 310-1931 2500-1300 Plans and documents available The machine is in good condition, ready for operation. Subject to changes, errors, prior sale ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system+technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone 0041 62 966 18 32 Fax 0041 62 966 21 12

Category: 211 veneer machines / Veneering presses
Latest update: 09.03.2024 add to watchlist
approved
dealer
item-No.: 162929429
New in: 1980

used

check Seller: Ermaier Holzbearbeitungsmaschinen
Location: Land-de
Price: 2.200 € add to watchlist

Gebr. Veneer press GEWEMA / Hiller P65S YOC 1980 Top size: 250 x 110 cm Opening width: 35 cm Opening width limitation variably adjustable. Connected load: 15.1 kW (8.1 kW with economy switch) Power per hot plate: 7 kW circumferential safety ripcord Dimensions (approx. Dimensions): L: 288 cm W: 127 cm H: 167 cm Weight: 2.9t The hydraulics are leaking. The current consumption of the heating plates has been tested and is uniform. Sold in ACTUAL condition and unrefurbished from carpentry dissolution. Fixed price.

Category: 211 veneer machines / Hydraulic veneering presses
Latest update: 28.12.2023 add to watchlist
approved
dealer
item-No.: 163036270

used

check Seller: P.P.H.U TRACO
Location: 82-30 ELBL¥G Land-pl

add to watchlist

HYDRAULIC PRESS Manufacturer: JOOS Type: HP 90 Shelf size : 2550x1350 Hydraulic, electric Teflon shelves Elkom 6 actuators

Category: 206 presses / Veneering presses
Latest update: 17.01.2024 add to watchlist
approved
dealer
item-No.: 163163796

used

check Seller: FHU Mateusz Guzik
Location: 34-23 JUSZCZYN Land-pl

add to watchlist

Shelf press ORMA NPC 300 6/110 Shelf dimensions 3000x1300mm Number of hydraulic pistons: 6 Piston rod diameter 70mm Heated press with water CE Certified

Category: 211 veneer machines / Veneering presses
Latest update: 23.01.2024 add to watchlist
approved
dealer
item-No.: 163200607
New in: 2023

new

check Seller: CNC-Maschinentechnik - Wolfgang ECKER
Location: Land-at

add to watchlist

PLC – controlled (touch screen) multifunctional press with multiple functions Firstly, our multi-function press is a vacuum press, three-dimensional film deformation with or without membrane. Vacuum chamber size 2,340 x 1,340 mm Maximum workpiece height 60 mm Equipped with a vacuum diaphragm at the top and bottom. The press is equipped with a powerful vacuum system and a vacuum tank, which guarantees a constant and uniform supply of vacuum to the working chamber. Drive power vacuum pump 4.5 kW Vacuum tank volume 500 liters Vacuum pump flow rate 100 m³/hour Two pieces of air heat exchanger, each with a heating capacity of 3 kW. Secondly, our multi-function press is a hydraulic plate press with ten pieces of press cylinder and 200 tons pressing force – Suitable for different applications - - Cold and hot pressing - Single-sided and double-sided veneer pressing ...

You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)
Banner ad information  
HöFER 3rd category level
  • HöFER belt grinders (1)
  • HöFER veneering presses (1)
 
RESALE used machinery 25 years online