used HÄMMERLE CNC Bending Presses

Technical data: -Pressure capacity 2000 kN -Max working width 3100 mm -Stand round 3200 mm -Stand RADIUS 300 mm -Max mounted height 965 mm -Hub, or insertion depth Steplessly adjustable 0-400 mm -Plunger speed forward + reverse per 100 mm / sec -Operating speed in 9 steps selectable 1-10 mm / sec -Drive 400 V / 26.5 kW - space requirement approx. B H 4400 x 3500 X 2200 mm -Weight approx. 18500 kg -with: - CNC - control CYBELEC ModEva 15s BJ. 2007 -Back gauge with 4 controlled pneum. on the side and height-adjustable stop fingers -controlled bending AIDS in the velocity range -Hydr. -Pneum.. Clamp of the upper tool + substation witness -mot. Crowning / hydro cushion in the table -laterally movable support arms -E - foot switch -split pointed tool R 1-100 t / m, split die

Ref.nr. 00766 Description of the plant Used press brake Manufacturer: Hämmerle M+S Brugg AG Model AP 100 – 2100 Year of construction: 1991 Max. pressing force 1000KN Max working length 2100mm Max. stroke 400mm Projection 300mm Mass Weight 11500kg Operating voltage 380V 50Hz Control voltage 24V Total connection 23 KW Nominal current of the back-up fuse 63 A

Key data: 200 t, 400 mm

Ref. No. 00785 Description of the plant: Used press brake Manufacturer: Hämmerle Model AP 200 – 3600 Built in 1991 Press force 2000KN (200 T) Ready to work 3600mm Maximum stroke 400mm Projection 500mm Keystrokes 6 Control DNC 7000 Installed power 18.5kW Weight 21,000 kg Condition of the plant under power Immediate Submission Date There are several tools that can be purchased in addition to the machine.

Hydraulic Abkant and used stamping press, under current hydraulical embossing press / press brake, used, under power Serial / make: Hämmerle type / model: 2s 100-2050 year / year: 1978 pressing force / force: 100 t Bending length / operation length: 2050 mm tappet adjustment / ram adjustment: 150 mm Distance from plunger table / distance ram to table: 400 mm Stroke / stroke: 150 mm connection value / connected load: 11 kW weight / weight: 5,9 t

pressure: 2000 kN chamfer lenght: 3100 mm distance between columns: 3240 mm Control: Infinitron ram stroke: 400 mm work height max.: 1104 mm throat: 250 mm table width: 160 mm pre-running speed: 160 mm/s working feed: 1-10 mm/sec return speed: 160 mm/sec tank capacity: 550 l total power requirement: 28 kW weight of the machine ca.: 16,6 t dimensions of the machine ca.: 4,4x2,7x3,4 m CNC control Infinitron Hydro cushion MHK 1-30 Three-point die holder DH 1-30 Stop system A2 with a travel range of 600 mm Adjustment of the stop slide along the stop bar by separate controlled Z-axes Sheet metal support system H 2 Adjustment of the individual sheet metal support brackets through separately controlled W-axes Bracket SK 10 with lifting aid 0-45 ° with linear guide The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Max. pressing force: 2000kN, max. working length: 2600mm, max. stroke: 265mm, throat depth: 300mm, weight: 16t.

Max. pressing force: 1000kN, max. working length: 3100mm, throat depth: 250mm, connected load: 18kW, weight: 9.5t, operational hours counter: 76,566h, with accessories and documentation, was maintained regularly.

Max. working width: 3100mm, max. stroke: 400mm, max. pressing force: 2000kN, weight: 16.6t.

pressure: 200 t chamfer lenght: 3100 mm distance between columns: 2780 mm Control: Addcobend Infinitron total power requirement: kW weight of the machine ca.: 18 t dimensions of the machine ca.: m CNC control: Addcobend Infinitron Press force: 2000 KN Bending length: 3100 mm Distance between columns 2780 mm Clear distance between columns 2780 mm Projection of the stands 300 mm Back gauge - adjustable 1600 mm Stroke max. 400 mm Space required length 4300 mm Space requirement width 2650 mm Total height 3800mm Total weight about 18000 kg Machine hours 2011: 21226 h Machine hours today: approx. 23000-25000h Retrofit: 2011: approx. CHF 86,000 • Basic remodeling • Exchange Axodyn controller units (X & M axis) • Replacement of control relays and Telemecanique PLCs with safety PLCs • Replacement of power relays and thermal overcurrent trips • Double foot switch with additional functi ...

material width: 0750 mm material thickness: 12,00 mm no. of straightening rolls: 19 sheet thickness - min.: 0,50 mm diam. of the rolls ca.: 50 mm run-in height: 900 mm total power requirement: kW weight of the machine ca.: 10,00 t dimensions of the machine ca.: m HÄMMERLE HYDRAULIC LEVELING MACHINE - GF BRUGG The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: Hämmerle Type: TRM 50/750 Year of construction: 1990/ 2023 Overhauled: 2023 Sheet width: Max. 750 mm Sheet thickness: approx. 0.5-12 mm Part length in flow direction: min. approx. 100mm Feed speed: 2-20 m/min Number of straightening rollers: 19 pcs Diameter: 50mm Workpiece inlet height: 900mm Power requirement: 31kW Total weight: approx. 10.000kg

Consistent precision when bending due to 3-point technology and pressure distribution via hydro cushion. Very good maintained condition. Has always been serviced regularly and annually by the company Bystronic (service reports are available). Servomotors were exchanged. Still some spare or wear parts new with it.

Description: maximum pressing force 175 t, maximum stroke 300 mm, throat 300 mm, ram distance 700 mm, working length 2050 mm weight approx.: 12,000 kg, Approx. Onsite Dimension. (l x w x h): 4,800 x 2,200 x 3,300 mm

Description: maximum pressing force 175 t, maximum stroke 300 mm, throat 300 mm, ram distance 700 mm, working length 2050 mm weight approx.: 12,000 kg, Approx. Onsite Dimension. (l x w x h): 4,800 x 2,200 x 3,300 mm

Bending semi-automatic, tube bending machine, mandrel bending machine MOBITEC type BAH 1-2 KOTTMANN und BERGER GmbH Fabr. No. 056 Year of manufacture 09/2004 - for simultaneous bending of two steel pipe sections up to 12 mm bending angle max. 90 Tube diameter max 12mm Mandrel length approx. 65 mm Nominal power 3.5 kW Compressed air max. 6 bar / approx. 1 litre per bending cycle Mains connection 400 volts, 50 Hz - Pneumatic clamping - Pneumatic mandrel retraction - Control for angle input via STOBER Controlbox Series 4000/5000 - Control SIEMENS S7-200 with display TD200 - Machine without bending tools and without tool bearing bolt 25 x 183 mm - only 1 bending mandrel available (see pictures). Space requirements L x W x H 1000 x 1000 x 1500 mm Weight 390 kg good condition; used

The CNC press brake SMD PBH 110-3100-4C produced in 2006 is offered in a set with the ANTIL TWISTER F5 robot. Technical parameters : - manufacturer: SMD - type: PBH 110-3100-4C - year of production: 2006 - control: CNC CYBELEC ModEva 10 - overworked time: about 20,000 man-hours - pressure force: 110 tons - bending width: 3100 mm - maximum working speed: 10 mm / s - table width: 60 mm - table height: 960 mm - stroke: 465 mm - frame spacing: 2600 mm - throat: 410 mm - power supply: electric - 11.5 KW, 400 V three phases - oil tank capacity: 250 l - dimensions of the press: 3960 × 2045 × 3650 mm - total weight: 9500 kg Processing on a 3 m table and palletizing of finished details on 3 europallets.

Press force: 130T Stroke: 350 mm 4 axis Weight:8860 kg

Stock number: 3768 CNC PRESS BRAKE Manufacturer: DONEWELL, Type: 100 x 3000 Machine NO.: 588 12 2348, Year of construction: 1988 Specifications: Size bending length 3100 mm Size Printing capacity 100 tons Stroke length 215 mm Stand passage 2600 mm Projection 265 mm Bending speed 420 mm/min Hydraulic. CNC control Cybelec EURO III Fabr. Controlled in Y1-Y2-X Achen Program-controlled backgauge. X - 500 mm Accessories: Segment-split upper tool 3100 mm Multi bottom tool 3100 mm Operating manuals Length: 1300 mm, Height: 2450 mm, Width: 3100 mm, Weight: 7000 kg

Key data: 642 t

CNC Press Brake Manufacturer: SMD Yawei Type: PBB-630/6200 Year of construction: 2018 CNC control: CYBELEC ModEva 15 Pressure: 6,300 kN Working width approx. 6,200 mm DSP-Laser-TX Connected load: 400 V / 95 kVA

Key data: 175 t, 3600 mm

Machine Type: Press Brake Manufacturer: HACO Type: PPES36175 Year of construction: 1993 Condition: used **Offer will only be sent if a complete imprint is provided!** Location Warstein , Germany Reference MV-KÖL-0424-5 DESCRIPTION We offer you a used press brake from the manufacturer HACO. Press force 175t Bending length 3600mm further data on request. Availability: by arrangement Our offer is aimed at tradespeople who are registered within the meaning of the Trade Regulation Act according to §14 GewO. The offer is subject to change, subject to prior sale. Please provide your full contact details to receive a quote with our terms and conditions and payment terms. Errors in the descriptions and offers are excepted

AYEL-TECH PRESS BRAKE/WORKSHOP PRESS KBWP type 1050 x 100 ton -Capaciteit 1050 x 100 ton -Max Queen 1050 mm -Geeredschap -Pressure gauge -Noodstop -400V PRICE is plus VAT DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (3 km from the German border)

To force 80 Bending length 2100 mm with 3-point bending system . Installation height 782 mm Working stroke 265 mm . Rapid traverse 150 mm Step 10 mm Power 13 kW To machine weight 7,8 . with -3-point bending system -hydraulic tool clamping -sliding conditions -SICK photoelectric -6-axes stop system -many tools . ..... Control repair needed! Details on sale!

UWM PRESS BRAKE/WORKSHOP PRESS TYPE UWM 100 -Capaciteit 100 ton -Max druk pomp 32 MPA -Werkslag 220 mm -Max hoogte 680 mm -Max Queen 1000 mm -Panel afmeting 500 x 1000 mm -Afmetingen 1500 x 700 x 1820 mm -Weight 1200 kg -Motor 3 KW/400V DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (3 km from the German border)

TTMC ABKANTPRESSE TYP 1300 x 30 Sound -Capaciteit 1300 x 30 sound -Estun E21 besturing -2 hydraulic cilinders -Voetbediening -Fotocelbeveiliging -Noodstop -Documentatie -400V DUTCHMACH Metal processing machines ENSCHEDE-NIEDERLANDE (3 km from the German border)

Press brake AMADA HFE 220-3 Number of controlled axes / CNC controlled axis: 7 Condition good, ready to use, visit under electricity possible / Condition: good, in use, can be seen under power in Poland Pressure / Pressure: 2200 kN / 220 ton Bending length / working range: 3100 mm Distance between stands / distance between columns: 2700 mm Stroke / stroke: 200 mm Delivery speed / downwards speed: 1-100 mm/s Working speed / working speed: 1-10 mm/s Retraction speed / backwards speed: 1-100 mm/s Dimensions Machine / Machine's dimensions: 4.3 x 2.3 x 3.1 m Weight / Weight: 14 ton Machine has: new safety cards from Pilz, new tool clips, new keyboard of control, new stop finger Machine has: new safety cards by Pilz, new tool clamps, new CNC cover, new back gauge fingers