used HÜLLER Tapping Machines

Internal threading machine HÜLLER type UG8 Masch. No. 626 0376 Year of construction approx. 1970 Cutting capacity M 8 in steel M 9 in cast iron M 10 in brass projection 200 mm Table size 270 x 270 mm Spindle speed 700 ? 1000 - 1400 rpm 3 stages Motor power 0.3 kW Mains connection 380 volts, 50 Hz spindle speed via gearbox with three gear stages - Thread pitch via interchangeable wheels, machine equipped with interchangeable wheels for 0.5 / 0.7 / 1 / 1.25 mm pitch - quick-release chuck RÖHM 1 - 10 mm - el. Foot switch for triggering - manual head height adjustment via crank Space requirement L x W x H: 650 x 430 x 1200 mm Weight 190 kg good condition; used

CNC Vertical Lathe Make: Hüller Hille Type: VDM 120 – 11 Year of construction: 2002 Control: Siemens 840 C Max. turning diameter: 1300 mm Max: Circulation diameter: 1400 mm Axle stroke: Z-1000 mm X-1500 mm Dimensions to top edge of spindle: 940 mm Bearing Ø in front bearing: 710 mm Max. speed: 500 rpm Max. torque: 30 000 Nm Main spindle motor AC max.: 100/40% ED 76/115 kW Chip diameter: 1600 mm Feed intake/centeringØ: 790 mm Max. feed force Z/X axis: 25000 N Axis speed Z-X-axis: 0.01 – 14000 mm/min Z-X-Axis Displacement Measuring System: Angle Position Sensor/Linear Measuring System Tool carrier: Disc turret with B-axis Tool holders: Modular system UTS 50 Machine weight: 30 000 kg

Control: Siemens 840 C Max. turning diameter: 1300 mm Max: Circulation diameter: 1400 mm Axle stroke: Z-1000 mm X-1500 mm Dimensions to top edge of spindle: 940 mm Bearing Ø in front bearing: 710 mm Max. speed: 500 rpm Max. torque: 30 000 Nm Main spindle motor AC max.: 100/40% ED 76/115 kW Chip diameter: 1600 mm Feed intake/centeringØ: 790 mm Max. feed force Z/X axis: 25000 N Axis speed Z-X-axis: 0.01 – 14000 mm/min Z-X-Axis Displacement Measuring System: Angle Position Sensor/Linear Measuring System Tool carrier: Disc turret with B-axis Tool holders: Modular system UTS 50 Machine weight: 30 000 kg The machine is still energized. Viewing possible at any time by arrangement.

x-travel: 630 mm y-travel: 550 mm z-travel: 500 mm total power requirement: 10 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Pallet length: 0 mm Pallet width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Number of pallets: 0   Positions ATC: 0   CNC Brand: 0 CNC Model: 0 Control: SIEMENS SINUMERIK 840 D Technical data Number of axis total: 4 Longitudinal travel (X-axis): 700 mm Transversal travel (y-axis): 630 mm Vertical travel (z axis): 700 mm Dimension of the workpice: Width: 700 mm Table load max.: 500 kg Table divisions (B): 0.001 ° Table speed: 30 rpm Holding torque A-axis: 4000 Nm Tilting moment: 8000 Nm Pallets: number: 10 Length: 500 mm Width: 500 mm Maximum workpiece weight: 750 kg Time of changing palets: 7 sec Tool changer: Number of tools: 130 Tool diameter max.: 80 mm Diameter with free adjacent pockets: 150 mm Tool lenght: 350 mm Max. tool-weight: 10 kg Time of tool changing: 2.5 - 4.5 sec Average chip-to-chip time: 4 sec Spindle nose SK: 40 DIN69871-A40 Spindle speeds: stepl ...

x-travel: 800 mm y-travel: 800 mm z-travel: 800 mm Control: Sinumerik 840 D b-axis: 360 ° turning speeds: 16.000 U/min rapid traverse: 60 m/min tool taper: HSK 63 tool magazin:: 144 Plätze total power requirement: weight of the machine ca.: 17 t dimensions of the machine ca.: 7,4 x 3,35 x 3,7 m Pallet changing device: 180 ° NC rotary table Set-up station Full-space enclosure with workspace rinsing and manual rinsing gun Coolant system with IKZ Coolant pump 20-70 bar Coil suction filter 50mü Double chamber filter 60mü for internal coolant supply incl. prewarning Chip conveyor in scraper belt design Renishaw measuring system with probe Tool breakage control parallel to machining time (mech. probe) in tool magazine Incl. fixtures / clamping angle The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Clamping plate with T-slots and cross table, plate field, welding table, welding table, plate boring machine, T-slot plate, pallet changer -T-grooved plate comes: from a Huller Hille milling machine type nb-h 70 -Width: 475 mm -Length: 500 mm -Height: 68 mm -Plate: is solid -Groove width: 12 mm -Dimensions: 500/475/H68 mm -Weight: 90 kg

Matrix magazin Number of tools : 128 0.001 table index Reneshaw probe Fanuc control unit Table size : 500*500 X Axis : 700 mm Y Axis : 630 mm Z Axis : 700 mm Double pallets

The control system has been changed. The ballscrews have just been replaced with the originals. Since there was no room left due to the purchase of a new machine, it was forced out of the factory. It is ready for use after the electrical connection is made. Having a double table is a great advantage in terms of production. X axis travel 800 mm Y axis travel 630 mm Z axis travel 800 mm Turntable (4th axis) yes CNC VISEL Table length 630 mm Table width 500 mm Maximum workpiece weight 800 kg Pot count 60 Spindle taper ISO 50 Maximum spindle speed 9000 rpm Spindle motor power 37 kW ------------------- Weight 12500 kg Active working hours Plugged in working hours good condition In norms --------- Status visible (currently unplugged)

x-travel: 800 mm y-travel: 630 mm z-travel: 800 mm Control: Siemens type: 840 D size of pallet: 500x630 mm numbers of pallets: 8 : 360 ° turning speeds: 6000 U/min Table load: 800 kg spindle taper ISO: 50 Tool changer: Pos. chip conveyor: Feed: 1-36000 mm/min Cooling through the spindle: 50 bar total power requirement: kW weight of the machine ca.: 19,5 t dimensions of the machine ca.: 8x7x4,2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Internal threading machine Hagen & Goebel type HG 124 Masch. No. 4112 Year of construction approx. 1980 Cutting capacity M 3 to M 18 in brass M 3 to M 10 in steel projection 250 mm Table size 345 x 245 mm Spindle speed 200 - 1000 rpm. Motor power 0.55 / 1.0 kW Mains connection 380 volts, 50 Hz - 6 speed levels via belt change (3 steps via belt + 2 engine speeds) - Table height adjustment with rack via hand crank on the round column - without guide cartridge - Drill chuck 1 to 13 mm- Tool holder 25 mm cylindrical shaft holder Space requirement L x W x H 900 x 500 x 1800 mm Weight 260 kg good condition; used

Electric cutter, thread cutting machine for external threads REMS type Amigo 2 Tapping caliper for pipe threads as a set of 6 pieces of cutting clamps Article number: 540000 Year of manufacture approx. 2000 Cutting capacity 1/8 to 2 Pipe outer diameter 6?30 mm Speed approx. 30 to 18 rpm. Motor power 1700 Watt Mains connection 230 volts, 50 Hz - clockwise, anticlockwise - 6 pieces Thread cutting heads 1/2 / 3/4 / 1 / 1 1/4 / 1 1/2 / 2 - 1 piece Clamping spindle with toggle metal box for storage - Operating instructions - only used 2-3 times Space requirements Box L x W x H 780 x 280 x 150 mm Weight Complete set with box 23 kg very good condition, as good as new; used

Threaded drill M1 - M10 Motor 0, 22 + 032 kW Engine rpm 1420/ 2770 Spindle RPM 480-580 Weight 100 kg

TAIPU THREAD CUTTING MACHINE TYPE TP 915-12 P -Capacity M2-M12 -Pneumatic -915 mm working area -AufnahmeÃ? 19 mm -Speed 350 RPM -Without clamping table PRICE is plus VAT DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (3 km from the German border)

TAIPU THREAD CUTTING MACHINE TYPE TP 1800-16 P -Capacity M2-M16 -Pneumatic -Work area 1800 mm -AufnahmeÃ? 19 mm -Speed 350 RPM -Without clamping table PRICE is plus VAT DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (3 km from the German border)

TABLE FUR THREAD CUTTING MACHINE -Afmeting 900 x 600 mm Bdfeulsvlq DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (3 km from the German border)

metric thread: M 8 - M 52 pipe thread: 1/4 - 4 "spindle speeds: 15, 27 and 48 rpm operating voltage: 220V dimensions: 1050 x 650 x 1180 mm

BLUETECH GEWINDESCHNEIDMASCHINE TYP BHK03 â?? Capacity M5-M36 â?? Hydraulic â?? Plant area 2050 mm â?? Kop is draaibaar â?? Snelwisselopname â?? Traploos instincatable tapsnelheid â?? Traploo's instalable terugloop snelheid â?? Digital toerental uitlezing â?? Inclusief 12 tappotjes â?? Zware werktafel met T-sleuven â?? Smeersysteem met manuele of automatic functie â?? Noodstop â?? Documentatie â?? 400V DUTCHMACH Metal processing machines ENSCHEDE-NIEDERLANDE (3 km from the German border)

Technical data: - Threaded drilling capacity approx. M 3 - M 16 - Speed range up to 500 rpm - Working range ( swivel radius ) 2500 mm - Tool quick change holder size 2 diameter 31 - various inserts for tool quick-change recording - Table area with 5 T-slots 2050 x 900 mm . Table height 910 mm - Machine vice with jaw width 200 mm - 3 jaw chuck 250 mm - Pneumatic connection with pressure reducer - mobile base - Space requirement approx. W 2400 x H 2000 x D 1000 mm - Weight approx. 1100 kg

specifications: - Threaded drilling capacity approx. M 3 - M 12 - Unloading up to approx. 500mm - Stroke to approx. 600mm - Speeds approx. 80 - 1000 rpm - 2 St. spring pulls / balancers - Pneumatic connection 6 - 8 bar - mobile underframe - Space required approx. W 1000 x H 2000 x D 800 mm - Weight approx. 80 kg

Tapping capacity: 0 mm Drilling capacity: 0 mm Throat: 0 mm Tapping depth: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Max.cutting capacity in steel: 6 M (Metric) Max.cutting cap. in cast-iron: 8 M (Metric) Spindle stroke: 40 mm Spindle speeds: number (steps): 4 from: 600 rpm up to: 1800 rpm Depth of throat: 100 mm Table length: 180 mm Table width: 180 mm Max. distance spindle to table: 215 mm Voltage 50 Hz 3x: 380 Volt Spindle motor: 0.50 kW Overall dimensions machine: Length: 700 mm Width: 250 mm Height: 500 mm

Technical data Tapping from: 3 M (Metric) up to: 16 M (Metric) Spindle speeds: from: 50 rpm up to: 200 rpm Voltage 50 Hz 3x: 380 Volt Machine´s weight about: 150 kg

Technical data Tapping from: 5 M (Metric) up to: 35 M (Metric) Inner taper type: 3-TC1433 Spindle speeds: from: 50 rpm up to: 200 rpm Table length: 750 mm Table width: 620 mm Cutting speed: 50 - 2000 m/min Hydraulic Pressure: 150 kg Voltage 50 Hz 3x: 380 Volt Motor output: 5 HP Machine´s weight about: 450 kg Overall dimensions machine: Length: 1000 mm Width: 700 mm Height: 2000 mm Various accessories: Set of quick change inserts

Tapping capacity: 60 mm Drilling capacity: 0 mm Throat: 0 mm Tapping depth: 0 mm Tapping up to M 6 Table 1650 x 605 + extra tilting 305 x 605 Inclinable 0 - 90 Gr . Workingh area 0 - 1500 mm  

Tapping machine make VEB Hermann Matern type BSG 5Year 1984Tapping capacity8 spindle speeds: 130 - 1200 rpm.Projection: 340 mmQuill stroke: 40 mmTable size: 370 x 500 mmTable with 3 horizontal T-slotsTable movement up / down manually by handColumn diameter: 120 mmelec. Connection: 220/380 V / 50 HzConnected load: 0.42 kWExternal dimensions:Weight: 270 kgWith:- separate control cabinet with swivel control panel- Emergency stop button- Footrest on the bottom plate- V-belt drive- stepless speeds throughxa0xa0 retrofitted frequency inverter ROfre 899202 E, 0.37 kW- Drill chuck FS 6used, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools