We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
FORMAT: 1 DF-20 DF, 26 MIL. NF PER ANNUM, FORMING, MOULD TRANSPORT, DRIER TRANSPORT, DRIER, SETTING DEVICE, KILN ETC.
used
Extrusion press with 400 mm , drive 55 kW, hard casting screw wings and pre-press PZSVG 40 (Built 1996, drive 15 kW), on 4 hydraulic spindles. Complete with 1 spare part set screw and reel.
used
Box feeder with steel scale strap and combined drive for belt and reel over pre-bed. Box dimensions: Approx. 2,000 mm x 750 mm x 500 mm high; incl. hopper (on box) with the following inlet dimensions: 1,600 mm x 1,200 mm x 360 mm high. Condition: Good substance; Motor must be overhauled, tape partially made viable.
used
Fine rolling mill with 800 mm roll width and 800 mm roll diameter, incl. main drives and auxiliary drives, split adjustment manually. In regularly maintained condition, rollers without riefen. Available for an extra charge: Matching dust filter from Hellmich.
used
Roller crusher with 800 mm roller width and 800 mm roller diameter, incl. main roller drives and auxiliary drives, manual gap adjustment. In regularly maintained condition, rollers without ridges. Available at extra charge: Suitable dust filter by Hellmich.
-Knife shaft Z4 -in chrome-plated finish -D 200 mm -for machine K133 Condition good, used
used
Tool steel, round material, shaft section shaft, steel block, shaft sawn Material section 400 mm x length 165 mm Net weight: approx. 160 kg Material number: 1.2842 Material abbreviation: 90MnCrV8 Cold work tool steel with high hardness acceptance and good dimensional stability during hardening Application in toolmaking for cutting, punching and embossing tools. Rollers and profile rolls, measuring tools, guide strips, paper cutting knives. Delivery condition: Annealed to max. 229 HB Tensile strength as delivered: 770 N/mm2 Hardness: 790?820 C Tempering: 220?260 C Working hardness: 58-62 HRC Soft annealing: 680-720C - Medium alloy cold work steel - Oil hardener 4 pieces available, price per piece; used
used
Laska Mixer ME 250 VAC Capacity 180 Kg Mixing System Z Arm Kneader Mixer
used
Wolfking Twin shaft paddle mixer Model: 600L TSM Serial: 50032 Stainless paddle mixer with continuos ribbon, 600L capacity, pneumatic side doors open to discharge product, 3Ph
used
Risco RS200 Twin shaft paddle mixer Serial: 1004013 2010, Stainless, 200l capacity, forward and reverse, manual side door for discharging product, with manual, 3Ph
used
Forberg 1000LH Twin shaft paddle mixer Serial: 1720 Stainless twin shaft paddle mixer, 1000Kgs, bottom discharge doors, inspection hatch on each side, 3Ph
used
Revic RX450 Twin shaft paddle mixer Serial: RX1321 2021, Stainless twin shaft paddle mixer, Variable speed, forward and reverse, 450L capacity, with stainless lid, comes with tote bin hoist which mounts onto the side of machine, 3Ph
used
Machine details New Machines 4 Food Tumbler Mixer Model Uniball 225 Mixer Tumbler All stainless steel construction Capacity 225 litres, load capacity 60 kg to 100 Kg With inner blades to assist product roll Variable speed from 12 rpm to 24 rpm Motor gearbox drive 1.1 Kw Electric tipping discharge by motor gearbox Motor gearbox drive 0.12 kw Electric 400 volts 50 Hz Electrical controls mounted in IP 65 stainless steel control box Rigid construction to withstand movement Mounted on stainless steel wheels Discharge height to suit a standard 200 litre tote bin Overall length 1.6 metres Overall width 1.25 metres Overall height 2.0 metres Suitable for all type of products 12 months warranty
used
Rühle Tumbler MKR 600, with vacuum, scraping arm, container size 600 liters, LED control, direct cooling by strong cooling unit, mixing and kneading, up to 25 rounds per minute, all stainless steel, with loading device, comfortable emptying of the goods by standard carriage size, refurbished. The machine is currently in the overhaul and can be tested in Koblenz, Germany.
used
Producer: Suhner Description: - Capacity- 2000l - Brand new microprocesor Mikster MCM 023 - Variable drum speed - Automatic control - Variable pressure level - Pressure measurement; 0-99 % - Manual work mode - 50 programs easy to change - 6 cycles to one program, max cycle time 100h, two phases on cycle - Total time one phase 99 minutes - Brand new inverter Lenze Section responsible for vacuum; - Vacuum pump Busch 36m3 /h - Vacuum valves Danfoss - Total power 5.5 KW ( main motor 4KW + pump 1,5 KW ) - Total weigth 1500 kg - Fully made of stainless steel
used
Producer: Servotech Description: Vacuum mixer Servotech - Capacity 340 l - Out put 240 kg/h -Total power 4,0 KW - Dimension; 1500mm x 800mm x 1300mm -Total weight 650 kg - Manual operation - one mixing and discharging gear - Top and discharging covers opened manualy - Machine fully made with s/s
used
Rühle Tumbler MKR 150, with vacuum, mixing- and scraping arm, container size 150 liters, adjustable Touch-PC control, direct cooling by strong cooling unit, mixing and kneading, up to 50 rounds per minute, all stainless steel, comfortable emptying of the goods by standard carriage size. You are very welcome to test the machine in our facility in Koblenz, Germany.
used
Vakona ESK 125 Tumbler, vacuum mixing and tumbling machine, the machine comes with tumbling arm and mixing arm, container size 125 liters, MC control, direct cooling by strong cooling unit, mixing and kneading, all stainless steel. You are very welcome to inspect and test the machine in our facility in Koblenz, Germany.
new
Height 2130 Width 1410 mm Length 2130 mm Weight 1500 kg Capacity 1200 l Voltage Electrical: 400V 50Hz 3N Installed Power 9.1 kw Main material Stainlees Steel Load 1000 kg Mixing System Spiral With Paddles Product discharge Pneumatic dampers, front Mixer type Vacuum Mixer Shafts amount Double Shaft
used
Rühle Miknetum MGR 1500, newest generation of Tumbler, year of construction 2008, with vacuum, mixing arm, container size 1500 liters, filling size 900 Liters, intelligent Touch-PC control, direct cooling by strong cooling unit, mixing and kneading, up to 25 rounds per minute, all stainless steel, feed spindle as loading device, comfortable emptying of the goods by standard carriage size. You are very welcome to see the machine at our facility in 56070 Koblenz, Germany.
used
Ruhle Miknetum MGR 900, newest generation of Tumbler, with vacuum, mixing arm, container size 900 liters, filling size 675 Liters, intelligent touch-PC control, direct cooling by strong cooling unit, mixing and kneading , up to 25 rounds per minute, all stainless steel, loading device, comfortable emptying of the goods by standard carriage size You are very welcome to test the machine in our facility in Koblenz, Germany.
used
Ruhle MKR 220 high tech tumbler with cooling and vacuum.
used
“Wolfking” mixer-grinder Type TSMIG 1250/200 twin shaft paddle mixer mixer capacity 1.250 L. 200 mm – head with tool trolley all stainless steel dimensions mixer (l x w x h) : ± 2.350 x 2.000 x 2.600 mm loading height : 2.200mm pneumatic lid suitable for cooling with N2 or Co2
used
Rühle Tumbler MKR 300, Ruehle Hightech Tumbler with vacuum, incl. mixing and tumbling arm, container size 300 liters, Touch-PC control, direct cooling by strong cooling unit, mixing and kneading, up to 25 rounds per minute, all stainless steel, with loading device. You are very welcome to inspect the machine at our facility in Koblenz, Germany. If you have any questions, please do not hesitate to contact us.
new
Blender Talsa MIX95P; 400 V, new, Bowl capacity 95 litres, engine completely in stainless steel, separate stirrer and Bowl drive, 1 speed, forward and return, Bowl tilt, Dimensions Lxwxh approx. 108x80x120cm, weight 170kg New machine, built in 2018