1000 offers

maximum number of results exceeded > 1000
please refine your search

New in: used
Price: 7.118 €
Location: Land-de DE 58285 Gevelsberg
Seller: ProHa Maschinen

%%%%%% ATTENTION – SPECIAL OFFERS NOW AVAILABLE ! %%%%%% OUR PRICES ARE HITTING THE SUMMER LOW ! %%%%%% SO PRICES ARE CURRENTLY REDUCED BY 35% ! Precision Profile- & Surface Grinding Machine Jung HF 50 R with autom. depth adjustment manufacturer: Jung type: HF 50 R mach.-Nr.: 5048 year of construction: ? / 09.2018 tüp. comm.-Nr.: 3990800/009 stock-nr.: 1901 + Special Price: old 10.950,- € | now 7.117,50 € + All prices are shown without taxes (net price) Technical Data (according to manufacturer) Technical Data (according to manufacturer) grinding length: 600 mm grinding width: 200 mm table clamping surface: 600 x 200 mm vertical feed h ... more

New in: used
Price: request quote
Location: Land-DE Germany, 47652 Weeze
Seller: Thünnesen GmbH

max. 120 kg dough, hydraulic fixing the bowl\r\nstainless steel bowl\r\n more

New in: 2006
Price: request quote
Location: Land-de DE 49377 Vechta
Seller: Hawamex Recycling und Umwelttechnik GmbH & Co. KG

Length of the drum: 5.50 m Diameter of the drum: 2.00 m Hole size of the drum: has to be agreed Hydraulically folding stonegrid Radio remote control more

New in: used
Price: request quote
Location: Land-DE Germany, 47652 Weeze
Seller: Thünnesen GmbH

max. 240 kg dough, safty device\r\n2 speeds, 2 timers, hydraulic fixing the bowl\r\ndoughhook stainless steel\r\n1 moveable stainless steel bowls\r\n more

New in: 2012
Price: request quote
Location: Land-de DE 71706 Markgröningen, Dornierstr. 20
Seller: Wolfgang Finken GmbH

GENERAL Project No.: 904591 Number: 1 PCs. Manufacturer: CHIRON Type: FZ 15 FX Magnum high speed Control: HEIDENHAIN iTNC 530 Year of construction: 2012 State of preservation: second-hand machine Stories about: 1 layers DESCRIPTION MILLING Travel in X 730 mm Travel in Y 400 mm Travel in Z 360 mm Maximum rapid traverse in X/Y/Z 60/60/60 m / min Direct measuring system Tool holder HSK-A 63 Maximum speed milling spindle 18000 1/min Maximum power with ED 10-40 / 100% 58/42 kW Maximum torque at ED 10-40 / 100% 70 nm Chain-type tool magazine 48 stations Rotary table Swivel unit NC-controlled Swivel range +110/-130 degree 2 PCs. NC-controlled rotary table Rotary tab ... more

New in: used
Price: request quote
Location: Land-DE Germany, 47652 Weeze
Seller: Thünnesen GmbH

capacity 3 - 13 kg dough\r\ndividing-range: 10 pieces 300 - 1300 g\r\n 20 pieces 150 - 650 g\r\n more

New in: 1999
Price: 19.500 €
Location: Land-at AT 3354 Wolfsbach, Bachlerboden 11
Seller: HDM GmbH

Massey Ferguson 8937 with Bobcat 3071 BJ. 1999 3500 hrs 3t lifting capacity 7, 2 m lifting height Work lights 2-stage hydrostatic hydraulic tool lock Pallet fork more

New in: 2007
Price: request quote
Location: Land-de DE Deutschland
Seller: OBM Recycling Machinery B.V.

Manufacturer Paal Typ Konti 425 E Year of construction 2007 Hours of operation 33,959 hours Press power 100 tons (120 tons at 300 bar) Specific press capacity 121,1 tons/m² Feed channel 2,000 x 1,020 mm (l x w) Throughput rate under operating conditions 375 m³/hour Theoretic throughput rate 780 m³/hour Bale size 1,100 x 750 mm (w x h) Driving motor 2 x 45 kW Connected load 108 kW Rated current 210 A Tying system 5-fold vertical, fully automated Throughput rate at a bulk weight of 35 kg/cbm approx. 13 tons/hour bulk weight of 60 kg/cbm approx. 22 tons/hour bulk weight of 100 kg/cbm approx. 35 tons/hour Bale weight 550 up to 750 kg, depends on material Volume hydraulic oil tank 3,100 l SPS  ... more

New in: 2017
Price: 12.250 €
Location: Land-at AT 3354 Wolfsbach, Bachlerboden 11
Seller: HDM GmbH

Demonstration machine Kioti CK2810 Year 2017 28PS, 360 h, 1. 3 m wide 740kg lifting capacity, 540U RPM PTO speed, 20 km / h speed, hoist with load position and lower throttle, hydraulic power steering, roll bar and lighting, all-wheel drive and differential lock can be activated mechanically, DW 1 - control unit, rear grass tyres 33X12.5-16.5 and front 23X8.5-12 Charges also snow plow, Sweeper, mower deck, etc. available more

New in: 2012
Price: request quote
Location: Land-at AT Österreich
Seller: OBM Recycling Machinery B.V.

Manufacturer Paal Type Konti 275 GS Year of construction 2012 Hours of operation 11,785 h, stand April Press power main press 80 tons Specific press capacity 97 N/m³ Idle volume capacity 590 m³/hour Capacity at 35kg/m³ approx. 360 m³/hour Feed channel 1,750 x 1,020 mm Capacity per cycle time 2 m³ Bale size 750 x 1,100 mm, length variable Driving motor 55 kW Connected load 72 kW Total rated current 130 A Back-up fuse 160 A Tying system 5 fold vertical, fully automatic Bale weight up to 750 kg, depends on material Volume hydraulic oil tank 1,250 l SPS controller (manuf., type) Siemens Simatic S7 300 Operating panel (manuf., type) Siemens Multi Touch Panel Baler dimensions built up with ho ... more

New in: 2012
Price: 29.900 €
Location: Land-at AT 3354 Wolfsbach, Bachlerboden 11
Seller: HDM GmbH

Massey Ferguson 9205 Year 2012, 2480 h, 75hp Lift height 5, 20m; Lifting capacity 2, 2T Hydrostatic drive 3 Steering modes Hydraulic tool lock 3. control circuit on the telescopic arm Work lights incl. pallet fork Light - or utility bucket available surcharge more

New in: 2002
Price: request quote
Location: Land-at AT Österreich
Seller: OBM Recycling Machinery B.V.

Manufacturer Presona Typ LP 80 VH2 Year of construction 2002 Working hours 62,540 h Press power main press 78,5 tons Specific press capacity 97 N/cm² Press power of pre-press 28 tons Volume of pressing chamber 2,7 m³ Feed channel1,500 x 1,100 mm Theoretic throughput rate 1,200 m³/h Throughput rate under operating conditions 560 m³/h Bale size 750 x 1,100 mm Driving motor 2 x 45 kW Tying system 5 fold vertical, full automatic Throughput rate approx. 13 up to 30 tons/h, depends on material Bale weight 450 up to 600 kg, depends on material and bale length Volume hydraulic oil tank 1,500 l Baler dimensions built up with hopper 10,985 x 3,750 x 4,310 mm (l x w x h) Transport dimensions only b ... more

New in: used
Price: 59.000 €
Location: Land-at AT 3354 Wolfsbach, Bachlerboden 11
Seller: HDM GmbH

JCB 560-80 agri Super Year of build 2016, 145PS, 3435 h Lifting height 8m Load capacity 6, 0 t 3 Steering modes hydraulic tool lock 3 control circuit on the telescopic arm Work lights 40km / h Continuous hydraulic Air conditioning incl. pallet fork Street legal Light - or utility bucket available surcharge more

New in: 2003
Price: request quote
Location: Land-nl NL Niederlande
Seller: OBM Recycling Machinery B.V.

Manufacturer Bollegraaf Type HBC 140 Year of construction 2003 Working hours 39,542 h Press power main press 140 tons Press power of pre-press 70 tons Feed channel 1,600 x 1,100 mm (l x w) Capacity per cycle time 4,34 cbm Theoretic cycle time 16 sec. Bale size 1,100 x 1,100 mm (w x h) length adjustable Driving motor 2 x 75 kW Connected load 209 kW Tying system 5-fold vertical, fully automated Throughput rate at a bulk weight of 30 kg/cbm approx. 30 tons/h bulk weight of 50 kg/cbm approx. 46 tons/h bulk weight of 100 kg/cbm approx. 82 tons/h Bale weight 850 up to 1.500 kg Hydraulicoil 2,300 l Baler dimensions built up with hopper approx. 13,200 x 2,750 x 5,020 mm (l x w x h) Transport dimens ... more

New in: 2010
Price: 36.900 €
Location: Land-at AT 3354 Wolfsbach, Bachlerboden 11
Seller: HDM GmbH

CATERPILLAR TH406C Built in 2009, 3295 h, 126 PS Lifting height 6, 10m Load capacity 3, 7T Torque converter transmissions, 3 Steering modes hydraulic tool lock 3. control circuit on the telescopic arm Load sensing hydraulics Air conditioning Vibration amortization 40m / h Work lights Street legal incl. pallet fork Light - or utility bucket available surcharge more

New in: 2005
Price: request quote
Location: Land-de DE Deutschland
Seller: OBM Recycling Machinery B.V.

Manufacturer Avermann Typ AVOS 1810S-90/100 Year of construction 2005 Hours of operation 23,072 h Quantity of pressed bales 16,163 piece Press power main press 100 tons Specific press capacity 121,2 N/cm² Feed channel 1,000 x 1,800 mm Capacity per cycle time 1,35 cm³ Theoretic cycle time 12,5 sec. Bale size 1,100 x 750 mm Driving motor 2 x 45 kW Connected load 130 kW Tying system 5 fold vertical, full automatic Throughput rate at a bulk weight of 30 kg/cbm approx. 12,2 tons/h bulk weight of 50 kg/cbm approx. 16,0 tons/h bulk weight of 100 kg/cbm approx. 23,2 tons/h Bale weight 500 up to 800 kg, depends on material and bale length Volume hydraulic oil tank 2,000 l SPS controller (manuf., ty ... more

New in: 2012
Price: 34.250 €
Location: Land-at AT 3354 Wolfsbach, Bachlerboden 11
Seller: HDM GmbH

Merlo P32. 6 top Year 2012, 102 HP Perkins engine, 2780 h Lifting height: 6, 4m; Lifting capacity: 3, 2T hydraulic Werzeugverriegelung 3. control circuit on the telescopic arm 3 Steering modes 2-step hydrostatic drive 40km / h Work lights, radio Street legal incl. pallet fork Light - or utility bucket available surcharge more

New in: 2008
Price: request quote
Location: Land-a A Österreich
Seller: OBM Recycling Machinery B.V.

Manufacturer Presona Typ LP 100 CH4 Year of construction 2008 Hours of operation total 20,280 hours, stand March 2018 Effective pump running time 6,140 hours Quantity of pressed bales 207,502 bales, stand March 2018 Press power main press 100 tons Specific press capacity 120 N/cm² Feed channel 1,650 x 1,100 mm Capacity per cycle time 3,2 m³ Theoretic throughput rate 1,300 m³/h Throughput rate under operating conditions 600 m³/h Bale size 1,100 x 750 mm Driving motor 2 x 55 kW Tying system 5-fold vertical, fully automatic Throughput rate at a bulk weight of 30 kg/cbm 14 up to 18 tons/h bulk weight of 50 kg/cbm 17 up to 21 tons/h bulk weight of 100 kg/cbm 23 up to 32 tons/h Bale weight 500 ... more

New in: 2002
Price: 19.500 €
Location: Land-de DE 33449 Langenberg, Neuzeller Straße 42
Seller: SN - InTec Ltd

used agricultural machines planers glue Binder-stack machine suitable for stacking of glue Binder It can also as one and off promotion for a mechanization of a planing plant be converted and completed Manufacturer: Minda industries Condition: used, dismantled Year of construction: 2002 Reference number: ATWE126 consisting of: Heavy conveyor belt drive Length: 18m Width (lenght): 0, 8 m Roll diameter: 160mm Drive: SEW 7, 5kW motor gearboxes All rolls powered Heavy conveyor belt with Abschiebebalken, stacking and lifting table Length: 18m Width (lenght): 0, 8 m Roll diameter: 160mm Drive: SEW 7, 5kW motor gearboxes All rolls powered Hydraulically powered lift table, st ... more

New in: 2010
Price: request quote
Location: Land-de DE Deutschland
Seller: OBM Recycling Machinery B.V.

Manufacturer Kampwerth / Presto Typ HPK 50 BSK Year of construction 2010 Hours of operation 7,234 hours, stand 09/2018 Press power main press 50 tons Feed channel 1,250 x 1,050 mm (l x w) Capacity per cycle time 0,96 cbm Theoretic cycle time 22 sec. Theoretic throughput rate 157 cbm/h Bale size 1,100 x 700 mm (w x h) length adjustable Driving motor 22 kW Connected load 31,5 kW Tying system 4-fold vertical, fully automated Throughput rate at a bulk weight of 30 kg/cbm approx. 4,4 tons bulk weight of 50 kg/cbm approx. 6,3 tons bulk weight of 100 kg/cbm approx. 9,9 tons Bale weight up to 550 kg, depending on material Volume hydraulic oil tank 400 L SPS controller (manuf., type) Siemens S7 200  ... more

New in: 2013
Price: request quote
Location: Land-de DE 48565 Steinfurt, Daimlerstr. 18
Seller: Dickmann-Import-Export

Chain mobile coarse piece of screening plant Powerscreen Warrior 2400 year 2013 Betriebsstd.ca. 2800 h All bands like new Work L = 18 dimensions, 50m B = 15,35 m H = 5.20 m Transport L = 17, B = 35m 3, 00 m H = 3. 60 m Weight approx. 46 â?¢ Hopper: 5,490 x 3.630 mm â?¢ Task belt: 1,300 mm â?¢ strap width: fine grain belt 900 mm Medium particle size range 900 mm Excess grain band 1.600 mm â?¢ Discharge height: up to 4.880 mm Engine CAT diesel sieve box 6.10 x 1.85 m double deck up-to-date upper deck LOCHBLECh deck metal mesh Machine is in perfect technical and optical condition NOW AVAILABLE Acces ... more

New in: 2011
Price: request quote
Location: Land-de DE Deutschland
Seller: OBM Recycling Machinery B.V.

Manufacturer Paal Typ Konti 700 GSK Year of construction 2011 Hours of operation 3,988 h, stand January 2018 Piece of pressed bales 31,423 bales Press power main press 1,940 kN / 194 tons Specific press capacity 160 N/cm² Feed channel 2,000 x 1,020 mm (l x w) Capacity per cycle time 3,45 cbm Volume output at idling speed 890 m³/h Throughput rate under operating conditions at a bulk weight of 35 kg/m³ 470 m³/h Bale size 1,100 x 1,100 mm (w x h) length adjustable Driving motor 2 x 75 kW Connected load 189 kW Tying system 5-fold vertical, 4-fold horizontal, fully automated Throughput rate bulk weight of 30 kg/cbm approx. 16 tons/h bulk weight of 50 kg/cbm approx. 26 tons/h bulk weight of 1 ... more

New in: 2000
Price: request quote
Location: Land-it IT 36066 Sandrigo, Via Piave, 7
Seller: Baldin SRL

Hot press ITALPRESSE UT/6L with: - assembled planes 3000x1300mm - 1 daylight, opening 400mm - 6 hydraulic pistons D=70mm - hot water heating, without boiler/furnace Machine at CE norms more

New in: 2003
Price: request quote
Location: Land-de DE Deutschland
Seller: OBM Recycling Machinery B.V.

Manufacturer Paal Typ Konti 325 E Year of construction 2003 Press power main press 94 tons Feed channel 1,750 x 1,020 mm Filling volume 2,15 m³ Theoretic throughput rate 660 m³/h Throughput rate under operating conditions 340 m³/h Bale size 1,100 x 750 mm, length variable Driving motor 75 kW Connected load 96 kW Rated current 180 A Tying system 4 fold vertical, full automatic Throughput rate at a bulk weight of 30 kg/cbm approx. 11,5 tons/h bulk weight of 50 kg/cbm approx. 20 tons/h bulk weight of 100 kg/cbm approx. 32 tons/h Bale weight 525 up to 800 kg, depends on bale length and material Volume hydraulic oil 2,100 l Machine dimensions with feed channel 12,352 x 2,340 x 5,145 mm l x w x ... more

New in: used
Price: request quote
Location: Land-it IT 36066 Sandrigo, Via Piave, 7
Seller: Baldin SRL

Hot press SORMEC with: - assembled planes 3000x1300mm, changed and installed new on 2016 , with covering alu + mylard - 1 daylight, opening 450mm - 6 hydraulic pistons D=70mm - hydraulic unit hp 3 - complete of wooden furnace more

New in: 1995
Price: request quote
Location: Land-hr HR HR
Seller: OBM Recycling Machinery B.V.

Manufacturer BOA Typ 2040 K 30 P Year of construction 1995 Press power main press 55 to Feed channel 1.220 x 1.020 mm (l x w) Bale size 1.100 x 720 mm (w x h) length adjustable Driving motor 30 kW Tying system 4-fold vertical, fully automated Bale weight approx. 500 kg Volume hydraulic oil tank 800 L Transport dimensions only baler approx. 8.200 x 1.800 x 3.050 mm/3.400 (l x w x h) Machine weight baler approx. 20 to Comments: The baler was overhauled in 2017 and tested with material. The baler is currently in rental use, in good condition and available at short notice. The video about the test of the machine can be found on our website. Inspections in operation, are possible after agreement ... more

New in: 1983
Price: request quote
Location: Land-de DE
Seller: CARDA USED MACHINES

Name: Chamber filter press used Manufacturer: Netzsch Type: 1200/61 Year of construction: 1983 CardA-ID: F-0935 Hours of operation: Approx. 30,000 hours Disk format: 1200 x 1200 mm Plate number: 61 Filter surface: 150 m2 Press content: 2100 liters Thickness: 30 mm Plate material: PP Filter pressure: 15 bar Design: bridges bar press Schedule: Closed Closing pressure: 360 bar Plate transport: Automatically PCB package length: 4100 mm Dimensions: length 7100 mm x 2000 mm wide (including washing machine) x height 2350 mm (incl. car wash) Condition: Used Tech. Documentation: Yes, in German available Accessories: Hydraulic, control cabinet, light barrier, filter cloth washing  ... more

New in: 2018
Price: request quote
Location: Land-sl SL Slowenien
Seller: OBM Recycling Machinery B.V.

Manufacturer ANIS Trend d.o.o. Type ATS110-75D 60 tons Year of construction 2018 Hours of operation 52 hours Press power main press 59 tons Specific press capacity 71 N/cm² Bale density with material cardboard approx.450 kg/m³ Bale density with material PET- and HDPE bottles approx. 280 up to 320 kg/m³ Feed hopper 1,600 x 1,040 mm Capacity per cycle 2,13 m³ Theoretic cycle time 10,7 sec. Cycle time under operating conditions approx. 20 sec. Theoretic throughput rate 441 m³/hour Throughput rate under operating conditions approx. 235 m³/hour Bale size 1,100 x 770 x 1,200 up to 2,200 mm (w x h x l) Driving motor 45 kW Oil cooler 1,5 kW Oil heater 2,0 kW Main Electric power 400 V / 50 Hz  ... more

New in: 1979
Price: request quote
Location: Land-de DE 61381 FRIEDRICHSDORF, AM RINGELSBERG 8
Seller: MET-TECH GMBH

Qty. 1 Second-hand extrusion press with piercer Mfc.: UBE Force: 800 MT Built: 1979 Revamped: new hydraulic in 2010 Container dimensions: Dia. 90 x 555 mm Dia. 127 x 560 mm Dia. 132 x560 mm Material: Copper, Brass, Aluminium, Silver etc. Press is in good condition & on foundation more

New in: 2009
Price: request quote
Location: Land-nl NL Niederlande
Seller: OBM Recycling Machinery B.V.

Manufacturer BOA Typ Impress D130-110-B-5/5-1.6 Year of construction 2009 Hours of operation 15,576 hours Press power main press 127 tons Specific press capacity 10,5 kg/cm² Working pressure 280 bar Feed channel 1,620 x 1,000 mm (l x w) Press volume / cycle 4,1 cbm Throughput rate under operating conditions Up to 865 cbm/h Cycle time under operating conditions 22 sec. Press stroke 2,900 mm Bale size 1,100 x 1,100 mm (w x h) length adjustable Driving motor 2 x 55 kW Connected load 132 kW Tying system 5-fold vertical, 5-fold horizontal, fully automated Throughput rate at a bulk weight of 30 kg/cbm approx. 17 tons/h bulk weight of 50 kg/cbm approx. 29 tons/h bulk weight of 100 kg/cbm approx.  ... more

New in: 2008
Price: 21.100 €
Location: Land-ch CH 79618 Rheinfelden, Gewerbestrasse 18
Seller: MATEC system+technik GmbH

Truck crane Fassi F235ACXP. 25 At 13.5 m hydr. Projection - lifting power 1'215 kg Range 400° Hydraulically extendable outriggers Support width: 5'070 mm Built in 2008 Weight 3000 kg The crane is in a very good condition. All maintenance work have been carried out regularly. Including RCS radio control and gripper line. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4952 Eriswil/DE-79618 Rheinfelden MATEC system + technology GmbH Mechanical engineering Mill mat 4 CH-4952 Eriswil/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12 more

New in: 1992
Price: request quote
Location: Land-de DE Deutschland
Seller: OBM Recycling Machinery B.V.

Manufacturer Bollegraaf Type HBC 80 Year of construction 1992 Press power main press 78 tons Press power of pre-press 45 tons Feed channel 1,500 x 1,100 mm (l x w) Capacity per cycle time 2,9 cbm Theoretic cycle time 22 sec. Throughput rate under operating conditions 300 up to 450 cbm/h Bale size 1,100 x 720 mm (w x h) length adjustable Driving motor 45 kW Connected load 60 kW Tying system 5-fold vertical, fully automated Throughput rate at a bulk weight of 30 kg/cbm approx. 10 to/h bulk weight of 50 kg/cbm approx. 18 to/h bulk weight of 100 kg/cbm approx. 30 to/h Throughput rate with ruffler approx. 20 to/h Bale weight 500 up to 850 kg Volume hydraulic oil tank 900 l Baler dimensions built ... more

New in: 2002
Price: request quote
Location: Land-de DE 40764 Langenfeld, Schneiderstrasse 10
Seller: Maschinenhandel Borowski GmbH

warehouse no.: 502659 manufacturer: KRAUSS MAFFEI Typ: KM 420-1900 C2 Controller Unit: MC 4 year of construction: 2002 technical data: Clamping unit type of drive: fully hydraulically clamping type: fully hydraulic method of construction: four tie bars clamping force: 4200 kN distance between tie bars h: 800 mm distance between tie bars v: 800 mm size of mould plates h: 1270 mm size of mould plates v: 1200 mm min. mould height: 580 mm max. open daylight: 1600 mm opening stroke: 1020 mm ejector stroke: 250 mm ejector force: 95 kN centring device diameter of moving platen: 200 mm centring device diameter of fixed platen: 200 mm mould weight: 6700 kg technical data:i ... more

New in: 1991
Price: request quote
Location: Land-ru RU Russland
Seller: OBM Recycling Machinery B.V.

Manufacturer Bollegraaf Type HBC 100 Year of construction 1991, 2017 overhauled Hours of operation 40,586 hours Press power main press 100 tons Press power of pre-press 50 tons Feed channel 1,600 x 1,100 mm (l x w) Capacity per cycle time 3,15 m³ Theoretic cycle time 22 sec. Bale size 750 x 1,100 mm, length variable Driving motor 2 x 30 kW Tying system 5 fold vertical, fully automatic Throughput rate at a bulk weight of 30 kg/cbm up to 12 tons/h bulk weight of 50 kg/cbm up to 25 tons/h bulk weight of 100 kg/cbm up to 47 tons/h Bale weight 550 up to 850 kg, depends on material Volume hydraulic oil tank 1,200 l SPS controller (manuf., type) Telemecanique TSX Micro Operating panel (manuf., typ ... more

New in: 1999
Price: request quote
Location: Land-de DE 40764 Langenfeld, Schneiderstrasse 10
Seller: Maschinenhandel Borowski GmbH

warehouse no.: 502310 manufacturer: KRAUSS MAFFEI Typ: KM 30-220 C Controller Unit: MC 4 year of construction: 1999 technical data: Clamping unit clamping force: 300 kN distance between tie bars h: 320 mm distance between tie bars v: 320 mm size of mould plates h: 540 mm size of mould plates v: 540 mm min. mould height: 200 mm max. open daylight: 550 mm opening stroke: 350 mm technical data:injection unit screw diameter: 25 mm swept volume: 52 ccm injection pressure: 2500 bar equipment included ? CEE-socket 16A ? core pulling hydraulically 1x ? air valve 1x ? machine without material hopper ? Anti vibration mounts ? Schuko-socket 10A ? machine incl. wate ... more

New in: 1998
Price: request quote
Location: Land-nl NL Niederlande
Seller: OBM Recycling Machinery B.V.

Manufacturer BOA Typ 182 LB 6P Super Year of construction 1998 Working hours 36,012 h stand April Press power main press 90 tons Press power of pre-press 1 + 2 41,7 / 47,2 tons Feed channel 1,620 x 1,080 mm (l x w) Capacity per cycle time 2,5 cbm Bale size 1,100 x 800 mm (w x h) length adjustable Driving motor 2 x 55 kW Connected load 130 kW Tying system 4-fold vertical, fully automated Throughput rate at a bulk weight of 20 up to 40 kg/cbm approx. 8 up to 12 tons/h bulk weight of 60 up to 80 kg/cbm approx. 16 up to 22 tons/h bulk weight of 100 up to120 kg/cbm approx. 24 up to 28 tons/h Bale weight approx. 500 up to 600 kg Volume hydraulic tank approx. 1,400 l Baler dimensions built up with ... more

New in: 2000
Price: request quote
Location: Land-de DE 40764 Langenfeld, Schneiderstrasse 10
Seller: Maschinenhandel Borowski GmbH

injection moulding machine DEMAG Ergotech 200 - 840 compact warehouse no.: 502664 manufacturer: DEMAG Typ: Ergotech 200 - 840 compact Controller Unit: NC4 year of construction: 2000 technical data: Clamping unit type of drive: fully hydraulically clamping type: toggle method of construction: four tie bars clamping force: 2000 kN distance between tie bars h: 560 mm distance between tie bars v: 560 mm size of mould plates h: 830 mm size of mould plates v: 830 mm min. mould height: 310 mm max. mould height: 660 mm max. open daylight: 1235 mm opening stroke: 575 mm ejector stroke: 180 mm ejector force: 69 kN centring device diameter of moving platen: 160 mm centring dev ... more

New in: 1995
Price: request quote
Location: Land-nl NL Niederlande
Seller: OBM Recycling Machinery B.V.

Manufacturer Bollegraaf Typ HBC 100 AF Year of construction 1995 Working hours 23.304 h Press power main press 100 tons Press power of pre-press 50 tons Feed channel 1,600 x 1,100 mm (l x w) Capacity per cycle time 3,15 cbm Theoretic cycle time 22 sec. Bale size 1,100 x 720 mm (w x h) length adjustable Driving motor 75 kW Tying system 5-fold vertical, fully automated Throughput rate at a bulk weight of 30 kg/cbm approx. 12 tons/h bulk weight of 50 kg/cbm approx. 25 tons/h bulk weight of 100 kg/cbm approx. 47 tons/h Bale weight 550 up to 800 kg Hydraulicoil 1,200 l Baler dimensions built up with hopper approx. 11,750 x 2,250 x 6,690 mm (l x w x h) Transport dimensions only baler approx. 11, ... more

New in: 2002
Price: request quote
Location: Land-de DE 40764 Langenfeld, Schneiderstrasse 10
Seller: Maschinenhandel Borowski GmbH

injection moulding machine DEMAG ERGOtech 150-440 concept warehouse no.: 502592 manufacturer: DEMAG Typ: ERGOtech 150-440 concept Controller Unit: NC4 year of construction: 2002 warehouse no.: 502592 manufacturer: DEMAG Typ: ERGOtech 150-440 concept Controller Unit: NC4 year of construction: 2002 enquiry form email enquiry technical data: Clamping unit type of drive: fully hydraulically clamping type: fully hydraulic method of construction: four tie bars clamping force: 1500 kN distance between tie bars h: 500 mm distance between tie bars v: 500 mm size of mould plates h: 750 mm size of mould plates v: 750 mm min. mould height: 250 mm max. mould height: 560 mm ... more

New in: 1993
Price: 22.500 €
Location: Land-de DE Deutschland
Seller: OBM Recycling Machinery B.V.

Manufacturer Lindemann Typ BIMAX 12/110 K Year of construction 1993 Hours of operation 34.887 h Press power main press 120 tons Press power free stamper 24 tons Specific press capacity 9,91 kg/cm² Feed channel 2,000 / 1,400 x 1,040 mm (l x w) Bale size 1,100 x 1,100 mm (w x h) length adjustable Driving motor 3 x 45 kW Tying system 5-fold vertical, 3-fold horizontal, fully automated Throughput rate at a bulk weight of 30 kg/cbm approx. 10 up tp 12 tons/h bulk weight of 50 kg/cbm approx. 18 up to 26 tons/h bulk weight of 100 kg/cbm approx. 28 up to 40 tons/h Bale weight 650 up to 950 kg Volume hydraulic oil tank 2,500 L Transport dimensions only baler approx. 11,800 x 2,400 x 3,550 mm (l x w ... more

New in: 2003
Price: request quote
Location: Land-de DE 40764 Langenfeld, Schneiderstrasse 10
Seller: Maschinenhandel Borowski GmbH

DEMAG Ergotech 80-420-200 system for sale warehouse no.: 502629 manufacturer: DEMAG Typ: ERGOtech 80-420-200 System Controller Unit: NC4 year of construction: 2003 operating hours: 34000 h Do you need one used DEMAG ERGOtech 80 / 420-200 system with only approx. 34,000 operating hours? On request, we can make you our non-binding offer. In order to ensure the functionality of the used injection molding machine, we will check the operation of the machine with the Sumitomo-Demag service. Afterwards, this machine will be repaired and can be inspect by you during dry-cycle test run. technical data: Clamping unit type of drive: fully hydraulically clamping type: fully hydraulic me ... more

New in: 1994
Price: request quote
Location: Land-de DE Deutschland
Seller: OBM Recycling Machinery B.V.

Manufacturer Bauer Typ 500 Year of construction 1994 Hours of operation 26,663 hours Press power main press 50 tons Press power free stamper 24 tons Feed channel 1,800 x 1,020 mm (l x w) Capacity per cycle time 2 cbm Theoretic throughput rate 350 cbm/h throughput rate under operation 180 cbm/h Bale size 1,100 x 680 mm (w x h) length adjustable Driving motor 2 x 22 kW Tying system 4-fold vertical, fully automated Throughput rate at a bulk weight of 30 kg/cbm approx. 3 up to 5 t/h bulk weight of 50 kg/cbm approx. 4 up to 8 t/h bulk weight of 100 kg/cbm approx. 9 up to 15 t/h Bale weight 400 up to 550 kg SPS controller (manuf., type) Siemens S5 Machine weight baler approx. 20 to Comments: In  ... more

New in: 2002
Price: request quote
Location: Land-de DE 64653 Lorsch
Seller: EnTeHa GmbH & Co KG

: 4100 No.1 gebr. Rods - machining center 5 - axes Fabr. LID MAHO, DMC type 60 S Bu. 2002 with Sinumerik 840 D - Powerline Shopmill ARB.-ber.: 760 x 460 x 560 mm Power: 19/28 kW Accessories: NC Swivel Head (B-axis) 120 / + 30 ° 60-Fach tool magazine with taper cleaning NC rotary axis (A-axis) with collet Chuck clamping top 65 Tailstock, hydraulically tweeter NC bar loader 1100 mm Workpiece pick-up facility with discharge conveyor Production package with -Coolant tank 600 l, INTERLIT SKA 200-760 - IKZ 40 bar through the Centre of the spindle -Conveyors -Rotating viewing window Tool measurement Fabr. BLUM Oil mist extraction Mode 4 Other: HSK-A 63 spindle speed range up to ... more

New in: 1989
Price: 28.500 €
Location: Land-de DE Deutschland
Seller: OBM Recycling Machinery B.V.

Manufacturer Lindemann Typ BIGRO 1027 V Year of construction 1989 Press power main press 100 tons Specific press capacity 12,1 kg/cm² Press power free stamper 24 tons Feed channel 1,060 x 1,400 / 2,000 mm (l x w) Bale size 1,100 x 750 mm (w x h) length adjustable Driving motor 2 x 55 kW Connected load 138 kW Tying system 4-fold vertical, fully automated Throughput rate at a bulk weight of 20 up to 30 kg/cbm approx. 8 up to 11 to/h bulk weight of 40 up to 60 kg/cbm approx. 13 up to 16 to/h bulk weight of 70 up to 100 kg/cbm approx. 19 up to 23 to/h Bale weight 520 up to 720 Kg depending on material Volume hydraulic oil tank 2,700 L SPS controller (manuf., type) Siemens S5 115 U CPU 941 with ... more

New in: 2006
Price: request quote
Location: Land-de DE 40764 Langenfeld, Schneiderstrasse 10
Seller: Maschinenhandel Borowski GmbH

used injection moulding machine ENGEL VICTORY 1800-260 Power warehouse no.: 502528 manufacturer: ENGEL Typ: VICTORY 1800-260 Power Controller Unit: EC100 A03 year of construction: 2006 operating hours: 42266 h technical data: Clamping unit type of drive: fully hydraulically clamping type: fully hydraulic method of construction: tie-bar-less clamping force: 2600 kN size of mould plates h: 1100 mm size of mould plates v: 1000 mm min. mould height: 400 mm max. open daylight: 1300 mm opening stroke: 900 mm ejector stroke: 200 mm ejector force: 90 kN mould weight: 3300 kg technical data:injection unit screw diameter: 70 mm swept volume: 1039 ccm injection pressure:  ... more

New in: 2000
Price: request quote
Location: Land-de DE Deutschland
Seller: OBM Recycling Machinery B.V.

Manufacturer Paal Typ Konti 325 D-SO Year of construction 2000 Hours of operation 30,629 hours, stand Jun 2018 Press power main press 94 tons Feed channel 1,750 x 1,020 mm Filling volume 2,15 m³ Theoretic throughput rate 825 m³/h Throughput rate under operating conditions 400 m³/h Bale size 1,100 x 750 mm, length variable Driving motor 2 x 45 kW Connected load 120 kW Rated current 240 A Tying system 4 fold vertical, full automatic Throughput rate at a bulk weight of 30 kg/cbm approx. 14 tons/h bulk weight of 50 kg/cbm approx. 27 tons/h bulk weight of 100 kg/cbm approx. 38 tons/h Bale weight 525 up to 800 kg, depends on bale length and material Volume hydraulic oil 3,100 l Installation dim ... more

New in: 2004
Price: request quote
Location: Land-de DE 40764 Langenfeld, Schneiderstrasse 10
Seller: Maschinenhandel Borowski GmbH

injection moulding machine ENGEL VICTORY 1050-200 Power warehouse no.: 502523 manufacturer: ENGEL Typ: VICTORY 1050-200 Power Controller Unit: EC100 A03 year of construction: 2004 operating hours: 42524 h description of VICTORY 1050-200 Power: Our range of machines includes the detailed examination of all functions as well as the repair or replacement of defective components.Buying this used ENGEL injection molding machine is not a big risk, because we place the highest value on a functional test and further revision. For repair, we use original ENGEL replacement parts that meet the highest standards. The machine specification includes the clamping force of 2000 kN (200 to). ... more

New in: 1997
Price: request quote
Location: Land-de DE Deutschland
Seller: OBM Recycling Machinery B.V.

Manufacturer Bollegraaf Type HBC 50 AF Year of construction 1997 / 2018 overhauled Hours of operation 31,914 hours Press power main press 55 tons Specific press capacity 6,25 kg/cm² Press power of pre-press 25 tons Feed channel 1,320 x 1,100 mm (l x w) Capacity per cycle time 2,45 cbm Theoretic cycle time 30 sec. Bale size 1,100 x 800 mm (w x h) length adjustable Driving motor 45 kW Tying system 5-fold vertical, fully automated Throughput rate at a bulk weight of 30 kg/cbm approx. 5,5 t/h bulk weight of 50 kg/cbm approx.12 t/h bulk weight of 100 kg/cbm approx. 20 t/h Bale weight 380 up to 750 kg Hydraulicoil 900 l Transport dimensions only baler approx. 9,468 x 2,125 x 2,695 mm (l x w x h) ... more

New in: 2000
Price: request quote
Location: Land-de DE 40764 Langenfeld, Schneiderstrasse 10
Seller: Maschinenhandel Borowski GmbH

ENGEL ES 650-150 HL warehouse no.: 502566 manufacturer: ENGEL Typ: ES 650-150 HL Controller Unit: EC 100 year of construction: 2000 operating hours: 61835 h We are selling a tie-bar-less injection molding machine of the manufacturer ENGEL type ES 650-150 HL from the year of construction 2000. After the exact technical examination in our technical center in Langenfeld and the subsequent revision, the machine can be seen during test-run (dry-cycle run). technical data: Clamping unit type of drive: fully hydraulically clamping type: fully hydraulic method of construction: tie-bar-less clamping force: 1500 kN size of mould plates h: 820 mm size of mould plates v: 750 mm mi ... more

New in: 1995
Price: 28.500 €
Location: Land-nl NL Niederlande
Seller: OBM Recycling Machinery B.V.

Manufacturer Sacria Typ Saphir 2000 AT Year of construction 1995 Hours of operation 16,966 hours Press power main press 150 tons Specific press capacity 12,5 up to16,5 kg/cm² Feed channel 2,200 x 1,020 mm (l x w) Capacity per cycle time 2,2 cbm Theoretic throughput 726 cbm/h Throughput under operating conditions 500 cbm/h Bale size 1,100 x 1,100 mm (w x h) length adjustable Driving motor 2 x 55 kW Tying system 5 fold vertical, fully automated Throughput rate 10 up to 50 to/h Bale weight 600 up to 2,000 kg Volume hydraulic oil tank 2,800 L Baler dimensions built up with hopper aprox. 11,865 x 2,200 x 3,685 mm (l x w x h) Machine weight baler Approx. 40 tons Comments: Inspections are possibl ... more

You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)
more types: