british flag
Resale Logo

Hydraulic press used machine for sale on RESALE.INFO
all categories

back back
 banner advertisement information Recycling & Environmental Technique  Hawamex  http://www.hawamex.de 
banner logo
start page > keywords Hydraulic press > results
maximum number of results exceeded > 1000
please refine your search
1000 items ordered by
post used machinery     
No. Cat. Photo Manufacturer | Model
Type of machinery
Year Price Country Contact
 page 1  > 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
125479960 103

KUNZMANN UBM 2 for sale
CNC Milling Machines


CNC TOOL ROOM MILLING MACHINE KUNZMANN UBM 2 - 07-07-204 Shipping time: immediately number: 07-07-204 manufacturer: Karsten type: UBM 2 MACHINE data year: approx. 1994 L x W x H: approx. 1700 x 1500 x 1800 mm weight: ...
used machine
 
CNC TOOL ROOM MILLING MACHINE KUNZMANN UBM 2 - 07-07-204
Shipping time: immediately number: 07-07-204 manufacturer: Karsten type: UBM 2

MACHINE data year: approx. 1994 L x W x H: approx. 1700 x 1500 x 1800 mm weight: approximately 600 kg

Very good condition specifications control: HEIDENHAIN TNC 407 traverse paths: X - axis: approx. 200 mm Y - axis: approx. 140 mm Z - axis: approx. 200 mm Tischaufspannï¬?äche: approx. 500 x 180 mm spindle: speed range: approx. 100-6000 RPM spindle taper: ISO 20 power: approx. 1.9 kW tool clamping: hydraulic feed & express ducts: feed range: approx. 1-1500 mm / min rapid traverse: approx. 1.5 m / min accessories â?¢ horizontal & vertical - trimmer â?¢ angle milling head â?¢ coolant system â?¢ RS 232 - da tenschnittstelle â?¢ central lubrication â?¢ direct - measurement system HEIDENHAIN - glass scale â?¢ machine documentation â?¢ Tiltable Control Panel â?¢ electronic knob - emergency - from

Accessories on request price and other specifications on request
1994
Price  
    request
125475259 106

MEYER A 4-150 for sale
4-Column Hydraulic Press


Weight approx.: 1900 kgDimensions (l x w x h) approx.: 1150 x 1400 x 2300 mmDescription: Machine number 3575, table size 580 x 400 mm, column passage at the front approx. 300 mm, laterally approx. 180 mm, machine is equi ...
used machine
 
Weight approx.: 1900 kg
Dimensions (l x w x h) approx.: 1150 x 1400 x 2300 mm
Description: Machine number 3575, table size 580 x 400 mm, column passage at the front approx. 300 mm, laterally approx. 180 mm, machine is equipped with light barrier in the working area, piece counter, foot switch and control panel
1969
used machinery auction RESALE 700 €  
  CH   request
125479940 103

CME BF - 01 for sale
CNC Bed Milling Machines


CNC bed milling machine CME BF - 01 07-01-001 shipping time: immediately number: 07-01-001 manufacturer: CME type: BF - 01 MACHINE data year: approx. 1998 L x W x H: CA. 3500 x 2500 x 2550 mm weight: 10000 kg Very  ...
used machine
 
CNC bed milling machine CME BF - 01 07-01-001 shipping time: immediately number: 07-01-001 manufacturer: CME type: BF - 01

MACHINE data year: approx. 1998 L x W x H: CA. 3500 x 2500 x 2550 mm weight: 10000 kg

Very good condition specifications control: HEIDENHAIN TNC 426 CB travel: X - axis: 1300 mm Y - axis: approx. 700 mm Z - axis: approx. 850 mm Tischaufspannï¬?äche: approx. 1400 x 1000 mm spindle: speed range: approx. 10-4000 RPM Werkzeugaufna HME: ISO 40 - DIN 2080 power: approx. 11 kW tool clamping: hydraulic feed & express ducts: feed range: approx. 1-15000 mm / min rapid traverse: approx. 15 m / min accessories â?¢ universal - HURON - angle milling head â?¢ coolant system â?¢ RS 232 - slicer instead â?¢ hardened machine table â?¢ central lubrication â?¢ spindle chiller â?¢ direct - measurement system HEIDENHAIN - glass scale â?¢ machine documentation â?¢ foot switch for clamping â?¢ Tiltable Control Panel â?¢ electronic Handwheel â?¢ work light

â?¢ Feet â?¢ semi protection - cab â?¢ emergency

Accessories on request price and other specifications on request
1998
Price  
    request
125475118 107

ECKHOLD MCD 30-5 Piconet + HAT 520 for sale
Mob.Einhand clinch bracket m.Antriebsaggr.


Technical data: -maximum sheet thickness steel 3 mm - pressure at 500 bar 50 kN -Functioning acting with single stroke -Iron head 360 ° -Hydraulic hose length weight approx. 6 m- 4 kg Motor unit ...
used machine
 
Technical data:

-maximum sheet thickness steel 3 mm - pressure at 500 bar 50 kN
-Functioning acting with single stroke
-Iron head 360 °
-Hydraulic hose length weight approx. 6 m- 4 kg

Motor unit

Make: ECKOLD type: has 520 machine no.: 900010443 year of production: 2007

Technical data:

-Operating pressure infinitely adjustable up to max. 550 bar
-continuous stroke frequency adjustment - single stroke + continuous stroke
-Drive 400 V / 0.85 kW
-Space requirement approx. B 350 x H 750 x D 400 mm
-Weight approx. 30 kg
2007
Price  
    request
125465442 106

EDEL Revomatic 810-20 S for sale
Punching Machines


Noble turret punch press Revomatic 810-20 S Year of construction: 1993 Control: IBH micro 2 Punching power: 750 kN Sheet thickness up to approx. 8 mm Stamp stroke 26 mm Hydraulic actuators Fabr. H + L Lämmle Tool ...
used machine
 
Noble turret punch press Revomatic 810-20 S
Year of construction: 1993
Control: IBH micro 2
Punching power: 750 kN
Sheet thickness up to approx. 8 mm
Stamp stroke 26 mm
Hydraulic actuators Fabr. H + L Lämmle
Tool turret head with 22 stations
Working range 2000 x 1020 mm
Operating range: X by + 2083 mm up - 83 mm
in Y from + 1165 mm â 25 mm
Rapid traverse speed:
in X and Y 40m / min
Pressure 6,0 bar, min. 4.5 bar
Hub number 185
Stamp recording 30 x 120 mm
Spray lubrication, punching waste extraction,
Part of flap for wastes
1993
Price  
    request
125460795 102

DMG MORI CTX beta 1250 TC 4A for sale
CNC Turning- and Milling Center


turning diameter: max. 500 mmturning length: 1.250 mmcontrol: Sinumerik 840 D sl Siemensswing diameter: 500 mmdistance between spindles: 1.450 mmMain spindle:: turning speed range - main spindle: max. 5.000 min/-1power ...
used machine
 
turning diameter: max. 500 mm
turning length: 1.250 mm
control: Sinumerik 840 D sl Siemens
swing diameter: 500 mm
distance between spindles: 1.450 mm
Main spindle::
turning speed range - main spindle: max. 5.000 min/-1
power capacity - main spindel: 25 / 32 kW
max. Torque: 360 / 280 Nm
spindle head: 170h5
spindle bearing diameter: 130 mm
spindle bore: 77 mm
bar material dia.: 67 mm
usable bar diameter: 65 mm
C-Axis: 360 °
chucking diameter: max. 250 mm
tool magazin::
number of toolpositions: 24 pos.
max. tool diameter: 80 mm
max. tool-dia with free toolbox: 120 mm
max. tool weight: 5 kg
max. tool length: 300 mm
Milling Spindle::
Speed Milling Spindle: max. 18.000 min/-1
power capacity - milling spindle: 22 kW
max. Torque: 100 Nm
tool taper: HSK 63 A
B-Axis: +/- 110 °
axis stroke::
x-axis: 1: 450 (-10) mm
z-axis: 1: 1.300 mm
y-axis: 1: +/- 100 mm
Subspindel::
Spindle speed range subspindle: max. 5.000 min/-1
power capacity - Sub spindle: 25 / 32 kW
bar material dia.: max. 65 mm
chucking diameter: max. 250 mm
C-Axis: 360 °
turret::
number of toolpositions: 12 pos.
tool taper: VDI 40 TriFix
Number of driven toolspositions: 12 pos.
Spindle speed - driven tool stations: max. 4.000 min -1
power capacity driven tool-stations: 11,3 / 28 kW
max. Torque: 7 Nm
switching time: 30°: 0,4 sec
axis stroke::
x-axis: 2: 195 mm
z-axis: 2: 1.200 mm
total power requirement: 70 kVA
weight of the machine ca.: 8,0 t
dimensions of the machine ca.: 4,0 x 2,5 x 2,5 m
Documents:
Chip conveyor:
Milling spindle:
Coolantsystem:
high pressure coolant: 20 bar
hydraulic system:
Automatic Tool Changer: 24 pos.
work light:
C-axis: 2x
B-axis:
Y-axis:
hollow chuck unit:
Subspindle:
direkt probing: X1 / Y1 / Z1 / X2
Parts removal:
Signal lamp - 4 colour:
bar feeder interface:
bar feeder: LNS SuperHyd. 6.50-6.68 4,4m
Tailstock function counter spindle:
steady-rest on turret: SMW - SLU2X / 8-101mm
5-Axis CNC - Turning- and Millingcenter
DMG MORI - CTX beta 1250 TC 4A

- Main- Sub- and Millingspindle
- lower turret
- Conrol: Siemens Sinumerik 840 D sl Ergoline / Shopturn 3G
- 5-Axis-Simultaneous-Machining
- Betriebsstunden: Strom-Ein: ca. 7.500h / Spindellauf: ca. 2.000h



This ad was created with MODUL MWS - the software solution of LogoTech.
2013
Price  
    request
125465350 901

ZUGMASCHINE T1) Steyr Daimler Puch 760 a for sale


last off Code: BH-80088 First registration: 18.12.1979 elapsed. Hours of operation: 4.208 h Output: 44 kW Displacement: 1,140 cc Test badge: no inspection sticker must be acquired by the buyer pursuant to Â&se ...

 
last off Code: BH-80088
First registration: 18.12.1979
elapsed. Hours of operation: 4.208 h
Output: 44 kW
Displacement: 1,140 cc
Test badge: no inspection sticker must be acquired by the buyer pursuant to § 57a, authorities
Drive type: Diesel
FIN: 295.05-3685
Equity / total weight: 2,517/4,500 kg
Color: grey
Facilities: with headlamps above installed, safety signal lamp
Tyres: Max. Axle load front 1,750 kg, allowed axle load rear 2.300 kg, documentation: licence of types of available key: 1
Comments to the State: motor does not start, gearbox is leaking, axes are leaking, corrosion game on the steering linkage and steering column, have strong bearing clearance at rear axle, brake lines and hoses partly rusted and cracked, Total failure cable fire, batteries, frame has some significant corrosion damage, hydraulic system results in oil loss, paint largely bleached out, div. Rust all around vehicle, abrasions, and dents all around vehicle, rust spots on wheels,
Expressly stated, that no complete inventory and check the functionality of the auction object performed. There is still the possibility that there are significant defects. To learn about the condition and the efficiency of the auction object, the possibility of the visit and this is highly recommended. The auctioneer assumes no responsibility for the quality, condition, completeness, accessories, special properties, open or hidden defects and other damages. Please note also the general terms and conditions of auction.
System number: 2420-0-350-0014 and 2420-0-550-0005
 
Price  
    request
125460776 210

WEINIG Unicontrol 12 CNC - Video - for sale
Window production centre


Tenoning spindle: 2 St.Number of milling agregates: 10 St.Spindle diameter: 50 mm! MACHINE CAN BE INSPECTED DURING PRODUCTION Machine for sale in customer orders !# 6192 Weinig Unicontrol 12 CNC, with 2 tenoning spindle ...

 
Tenoning spindle: 2 St.
Number of milling agregates: 10 St.
Spindle diameter: 50 mm
! MACHINE CAN BE INSPECTED DURING PRODUCTION !

! Machine for sale in customer orders !

# 6192 Weinig Unicontrol 12 CNC, with 2 tenoning spindles and Vario table
..

Specifications Summary
(Possibly more included equpment please inquire)
..


Cut-off saw
..
cut-off saw electronically, horizontally adjustable: NC axis
Number of tools: 1 pcs.
Spindle speed: 3000-6000 r / min
Spindle diameter: 40 mm
Tool clamping length: 13 mm
Tool diameter max .: 400 mm
Motor power: 3 kW
Alignment laser for detecting the cut
Displacement axial: NC-axis integrated into control
Displacement axial: 150 mm

Aggregate for edge rounding of the bottom
..
Axial adjustment along with Ablängsäge
Spindle speed: 9000 U / min
Spindle diameter: 20 mm
Tool clamping length: 25 mm
Tool diameter max .: 130 mm
Motor power: 3 kW

Length stop CNC controlled
..
Length 3500 mm
Incl. Positioned cut-off saw integrated into control

1st tenoning spindle
..
Number of tools: variable, CNC-axis
Spindle length: 640 mm
Spindle stroke vertical: variable, CNC-axis
Spindle speed: 2800 U / min
Spindle diameter: 50 mm
Tool diameter max .: 380 mm
Engine power: 15 kW
With hydraulic tensioned outboard bearing
Complete counterprofile: Complete spindle length is countered


2. tenoning spindle
..
Number of tools: variable, CNC-axis
Spindle length: 640 mm
Spindle stroke vertical: variable, CNC-axis
Spindle speed: 2800 U / min
Spindle diameter: 50 mm
Tool diameter max .: 380 mm
Engine power: 15 kW
With hydraulic tensioned outboard bearing
Complete counterprofile: Complete spindle length is countered


Vario table with horizontal NC-axis


1. profiling spindle
..
Position: Right
Number of tools: variable, CNC-axis
Spindle length: 400 mm with counter bearing
Spindle stroke vertical: variable, CNC-axis
Spindle horizontal: variable, CNC-axis
Spindle speed: 7000 U / min
Spindle diameter: 50 mm
Tooling circle max .: 232 mm
Engine power: 11 kW
Radial adjustment: CNC axis
Axial adjustment: CNC axis

2. profiling spindle
..
Position: Right
Number of tools: variable, CNC-axis
Spindle length: 400 mm with counter bearing
Spindle stroke vertical: variable, CNC-axis
Spindle horizontal: variable, CNC-axis
Spindle speed: 7000 U / min
Spindle diameter: 50 mm
Tooling circle max .: 232 mm
Engine power: 11 kW
Radial adjustment: CNC axis
Axial adjustment: CNC axis

Grooving aggregate from above - before the final profile spindle
..
Position: horizontal top
Spindle speed: 9000 U / min
Spindle diameter: 40 mm
Spindle length: 40 mm
Engine power: 3.7 kW
Displacement axial: 30mm
Displacement radial: 125 mm
Radial clock to 8 positions by pneumatic gun
Axial adjustment with NC-axis


3. profiling spindle
..
Position: Right
Number of tools: variable, CNC-axis
Spindle length: 400 mm with counter bearing
Spindle stroke vertical: variable, CNC-axis
Spindle horizontal: variable, CNC-axis
Spindle speed: 6000 U / min
Spindle diameter: 50 mm
Tooling circle max .: 232 mm
Engine power: 11 kW
Radial adjustment: CNC axis
Axial adjustment: CNC axis


Profiling spindle - fitting spindle - at the machine end
..
Position: vertical right up
Spindle length: 160 mm
Spindle speed: 5850 U / min
Spindle diameter: 40 mm
Tooling circle max .: 210 mm
Engine power: 3.7 kW
Displacement axial: 115 mm
Displacement radial: 100 mm
Radial adjustment: CNC axis
Axial adjustment: CNC axis

grooving aggregate from top - in addition stand
..
Position: vertical right
Spindle length: 40 mm
Spindle speed: 5850 U / min
Spindle diameter: 40 mm
Tooling circle max .: 180 mm
Motor power: 3 kW
Displacement axial: 100 mm
Displacement radial: 80 mm
Radial clocked to 8 positions by pneumatic gun
Axial clocked to 8 positions by pneumatic gun

Grooving aggregate from bottom side - in addition stand
..
Position: horizontal bottom
Spindle length: 125 mm
Spindle speed: 5850 U / min
Spindle diameter: 40 mm
Tooling circle max .: 200 mm
Motor power: 3 kW
Displacement axial: 100 mm
Displacement radial: 100 mm
Radial adjustment infinitely variable NC axis
Axial clocked to 8 positions by pneumatic gun


Other features
..

Online-capable
equipment for stormproofing of already pressed sashes.
That means on the machine you can do the outside profiles on single pieces or
in pressed condition
Double piece package
Return conveyor for 1-man operation: turning system with collet
Studio window equipment
Electronic angle display for angular windows
Control: PC-Nexus
NC-axis for feed height adjustment
2 axially clocked feed rollers opposite profile spindle for manufacturing
narrow and short parts
Rung leadership and shoot Supports bar
pressure lineal from side is divided in sections
Automatic central lubrication
Vario table with horizontal NC-axis


Option:
used Oertli tools in different systems for single part production (that means
customer did the outide profile of the sahes on the single piece)


techn. details according to manufacturer - without guarantee!



This ad was created with MODUL MWS - the software solution of LogoTech.
 
Price  
    request
125465341 2404

MOBIL-KRANWAGEN ÖAF Gräf & Stift for sale


last off Code: BH-82028 First registration: 17.07.1981 FIN: 6970353 elapsed. Mileage: 397.141 km power: 285 kW Displacement: 12.763 cc Test badge: no inspection sticker must be acquired by the buyer pursuant to &A ...

 
last off Code: BH-82028
First registration: 17.07.1981

FIN: 6970353
elapsed. Mileage: 397.141 km power: 285 kW
Displacement: 12.763 cc
Test badge: no inspection sticker must be acquired by the buyer pursuant to § 57a, authorities
Drive type: Diesel
Type, variant, version: 20-320 G6-LTMF1
Equity / total weight: 23.050/23,400 kg
Color: grey
Equipment: Cloth - and leather interior with rear-mounted on Liebherr crane cab model LTMF1030V, serial number. 0011621, YEAR 1981
Documentation: types of licence available
Key: 1
Comments on the condition: engine oil and fuel loss, v-belts, hydraulic blower leaking, MA oil loss, Wishbone broken MA, VA pushrod defective, Luftpresser poor performance, articulated wheel rim on several points touched on, lights broken heater is to examine, hydraulic pump leak, leakage of crane hydraulics, various paint damage all-round vehicle as well as dents and rust, holes with rust spots behind passenger door front right,.
Expressly stated, that no complete inventory and check the functionality of the auction object performed. There is still the possibility that there are significant defects. To learn about the condition and the efficiency of the auction object, the possibility of the visit and this is highly recommended. The auctioneer assumes no responsibility for the quality, condition, completeness, accessories, special properties, open or hidden defects and other damages. Please note also the general terms and conditions of auction.
System number: 2320-0-400-0041 and 3950-0-400-0199
 
Price  
    request
125460780 206

S+S Super for sale
Frame press


Working width: 4500 mmWorking height: 2500 mmNumber of cylinders: 6 St.Dimensions (L/W/H): 6.400 x 1.850 x 3.650 mmWeight: 3.500 kgElectrohydraulic frame presser S + S Superwith automatic adjustmentCE versionFrame press  ...

 
Working width: 4500 mm
Working height: 2500 mm
Number of cylinders: 6 St.
Dimensions (L/W/H): 6.400 x 1.850 x 3.650 mm
Weight: 3.500 kg
Electrohydraulic frame presser S + S Super
with automatic adjustment

CE version

Frame press machine with 2 pieces movable presses, complete with 8 pieces
Holding cylinder for fixing frame parts, as well as with motor protection and
Control circuit breaker.

Size adjustment by optical length detection for height and width.

Working length x width: 4500 x 2500 mm

Rotating beam light curtain OTD 3

Medium pressure bar with automatic adjustment in height
up to 2500 mm high

Single pressure control for medium pressure bars

Cross-pressure device for pressing cross-bar window

Single pressure control for cross-pressure device

A triangle studio window crimping apparatus comprising:

Locking device of the vertical pressure beam
-3 push-on side-mounted pendulum pressure plates and regulators,
Central drive with single, pneumatic decoupling of the
Vertical pressure cylinder
(thereby independent of each other is the setting in any
Working height)


electrical hand control

Double pendulum plate

2 pendulum printing plates with extension (for triangular window triangle)


(Techn. Description according to manufacturer - without guarantee!)



This ad was created with MODUL MWS - the software solution of LogoTech.
 
Price  
    request
125465311 206

ITALPRESSE UT6L for sale
Hydraulic veneering presses


HOT PRESS Type ITALPRESSE UT/6L Solid Steel Plates heathed by water with wood fired boiler useful size plates mm. 2500 x 1300 n.06 cylinders diam.mm. 70 max. open mm. 650 hydraulic pump motor power Hp 2 Thrust Ton ...

 
HOT PRESS Type ITALPRESSE UT/6L
Solid Steel Plates
heathed by water with wood fired boiler
useful size plates mm. 2500 x 1300
n.06 cylinders diam.mm. 70
max. open mm. 650
hydraulic pump motor power Hp 2
Thrust Ton.120
max. pressure 4 kg/cm2

complete with security systems. perimeter rope
closing by bimanual buttons
opening by electric button
exclusion of 2 cylinders from the control panel
Volt. 380/50
net weigth kgs.4500
working conditions : Excellent
 
Price  
  IT   request
125460756 107

HERA COP 200/4100 for sale
Hydr. pressbrake


pressure: 200 tchamfer lenght: 4100 mmdistance between columns: 305 mmcolumn arm: 400 mmajustment speed: 100 mm/secworking feed: 1-10 mm/secreturn speed: 100 mm/secstroke: 300 mmdayligth: 500 mmtotal power requirement: 1 ...
used machine
 
pressure: 200 t
chamfer lenght: 4100 mm
distance between columns: 305 mm
column arm: 400 mm
ajustment speed: 100 mm/sec
working feed: 1-10 mm/sec
return speed: 100 mm/sec
stroke: 300 mm
dayligth: 500 mm
total power requirement: 18,5 kW
weight of the machine ca.: 19.800 kg.
range L-W-H: 4.600x2.200x3.400 mm
Machine No. 5076
Facilities:
- CYBELEC - CNC control
Model DNC 94 PS-6 (Color 3 D Grapik)
- Controlled axes:
Y1 - Y2 - X - R - Z1 and Z2, and crowning
- Hydraulic-tool clamping
- Different top and bottom tools
- 2Handbedienung/Fußschalter
- Safety press check NEW for 2014
- Demand-instructions in German language


This ad was created with MODUL MWS - the software solution of LogoTech.
1992
Price  
    request
125465310 901

ZUGMASCHINE T1) Steyr Daimler Puch 760 a for sale


last off Code: BH-80088 First registration: 18.12.1979 elapsed. Hours of operation: 4.208 h Output: 44 kW Displacement: 1,140 cc Test badge: no inspection sticker must be acquired by the buyer pursuant to Â&se ...

 
last off Code: BH-80088
First registration: 18.12.1979
elapsed. Hours of operation: 4.208 h
Output: 44 kW
Displacement: 1,140 cc
Test badge: no inspection sticker must be acquired by the buyer pursuant to § 57a, authorities
Drive type: Diesel
FIN: 295.05-3685
Equity / total weight: 2,517/4,500 kg
Color: grey
Facilities: with headlamps above installed, safety signal lamp
Tyres: Max. Axle load front 1,750 kg, allowed axle load rear 2.300 kg, documentation: licence of types of available key: 1
Comments to the State: motor does not start, gearbox is leaking, axes are leaking, corrosion game on the steering linkage and steering column, have strong bearing clearance at rear axle, brake lines and hoses partly rusted and cracked, Total failure cable fire, batteries, frame has some significant corrosion damage, hydraulic system results in oil loss, paint largely bleached out, div. Rust all around vehicle, abrasions, and dents all around vehicle, rust spots on wheels,
Expressly stated, that no complete inventory and check the functionality of the auction object performed. There is still the possibility that there are significant defects. To learn about the condition and the efficiency of the auction object, the possibility of the visit and this is highly recommended. The auctioneer assumes no responsibility for the quality, condition, completeness, accessories, special properties, open or hidden defects and other damages. Please note also the general terms and conditions of auction.
System number: 2420-0-350-0014 and 2420-0-550-0005
 
Price  
    request
125460473 107

KNUTH KHT 3016 for sale
Hydraulic Plate Shears


Weight approx.: 15000 kgDimensions (l x w x h) approx.: 2400 x 3800 x 2400 mmDescription: Sheet thickness max. 16 mm, working length 3020 mm, stroke max. 10/min, hold-down 16 mm, pressure 50 t, oil tank 360 l, outreach 1 ...
used machine
 
Weight approx.: 15000 kg
Dimensions (l x w x h) approx.: 2400 x 3800 x 2400 mm
Description: Sheet thickness max. 16 mm, working length 3020 mm, stroke max. 10/min, hold-down 16 mm, pressure 50 t, oil tank 360 l, outreach 180 mm, for further details see photos
1995
used machinery auction RESALE 1,500 €  
  DE   request
125452384 106

COMPAC HP 60 for sale
Hydraulic Presses


Auction name: Bankruptcy Voltman Construction B.V. in Nijverdal Online auction Start of auction: 18 May 2018 17:00 GMT +0200 (Western Europe (DST) Closing time: 30 May 2018 17:45 GMT +0200 (Western Europe (DST)  ...
used machine
 
Auction name: Bankruptcy Voltman Construction B.V. in Nijverdal


Online auction

Start of auction: 18 May 2018 17:00 GMT +0200 (Western Europe (DST)
Closing time: 30 May 2018 17:45 GMT +0200 (Western Europe (DST)

The price listed is an opening bid

To participate in the auction and for more information go to: BVA-Auctions
2002
1,250 €  
  NL   request
125451691 109

LVD COMPANY N.V. PPBL 165/40 for sale
Hydraulic press brake LVD PPBL 165/40


2001
52,000 EU?  
  PL   request
125452355 106

WEKO WE 680-2-20 for sale
Hydraulic Presses


Hydraulic presses WEKO in 680-2-20 was produced in 1997. Technical parameters : - pressure force: approx. 120 t - table base on the form: 46 cm - distance between columns: 67 cm - die stroke: 70 cm
used machine
 
Hydraulic presses WEKO in 680-2-20 was produced in 1997.

Technical parameters :
- pressure force: approx. 120 t
- table base on the form: 46 cm
- distance between columns: 67 cm
- die stroke: 70 cm
1997
4,975 €  
  PL   request
125447199 1402

MOOG REXROTH D651-129B for sale
Proportional valve


Proportional valve, directional control valve, solenoid valve, hydraulic valve, pressure valve, valve block, control block, injection molding machine, injection molding machine, plastic injection molding machine, plastic ...

 
Proportional valve, directional control valve, solenoid valve, hydraulic valve, pressure valve, valve block, control block, injection molding machine, injection molding machine, plastic injection molding machine, plastic injection molding machine, plastic injection molding press

-Hydraulic control block comes from an injection molding machine
-Manufacturer Battenfeld
-Proportional valve MOOG Mod. D651-129B Type P70FQ03ANZ0
-Valve Rexroth type
-Valve Rexroth type
-Voltage V
-Pressure max. Bar
-Dimensions 370/190/H260 mm
-Weight 37 kg
 
950 €  
  DE   request
125451819 106

EHT EHPS 20-40 for sale
Hydraulic Press Brake


Pressing force: 200t, press length: 4050mm, column width: 3550mm, installation height: 710mm, stroke: 330mm, inlet depth: 350mm, table width: 300mm, table height: 900mm, speed: 9mm/s, length: 7500mm, width: 3800mm, heigh ...
used machine
 
Pressing force: 200t, press length: 4050mm, column width: 3550mm, installation height: 710mm, stroke: 330mm, inlet depth: 350mm, table width: 300mm, table height: 900mm, speed: 9mm/s, length: 7500mm, width: 3800mm, height: 3540mm, weight: 19.8t.
1992
Price  
  DE   request
125447177 107

JAESPA COMPACT 2 for sale
Hydraulic-automatic band saw machine


Technical data: -NC - control MITSBISHI for fully automatic Work flow, material feed + cut - band saw blade dimensions 4240 x 34 x 1,1 mm -Cutting speed infinitely variable 17-106 m / min -Cutting pressure regulati ...
used machine
 
Technical data:

-NC - control MITSBISHI for fully automatic
Work flow, material feed + cut - band saw blade dimensions 4240 x 34 x 1,1 mm
-Cutting speed infinitely variable 17-106 m / min
-Cutting pressure regulation
-Section - approximately 260 mm
-square 300 x 260 mm
-min / max length simply lifting up to 1000 mm
-Material supply machine with multiple hub maximum length unlimited - rest length stand-alone / automatic operation 90 mm
-Coolant system
-Drive 400 V / 4 kW
-Space requirement approx. B 2580 x H 2000 X 2000 mm
-Weight approx. 2300 kg
2010
Price  
    request
 page 1  >
You didn't find your wanted machine?   to all dealers(no registration necessary)
More PRESS models (2 or more machines):
sell machinery
Sell your machinery
to the price starting with only € 0.09 monthly per machine!
machinery sold

Sold machinery

Milling machining centres GROB G 320E


SIZE TABLE: 1300 X 800 MM X/Y/Z: 600/655/585 MM SPEED AXES: 90/75/100 M/MIN ACCELLERATION: 7/5/15 M/S2 SPINDLE SPINDLE NO.: TW0 SPINDLE POWER: 29/39 KW SPINDLE SPEED:18000 RPM SPINDLE TAPER: HSK 63 C T S: 70 BAR TOOL ATC: 50 + 50 TOOL MEASURING: YES LONG TOOL: YES CHIP TO CHIP: 2.3 SEC FIXTURE HYDRAULIC FIXTURE: 6 + 6 CONNECTION DIMENSION L X B X H: 4MTR X 3.1MTR X 3.1MRT WEIGHT: 17 TON

Hydraulic Presses Compac HP 60


Auction name: Bankruptcy Voltman Construction B.V. in Nijverdal Online auction Start of auction: 18 May 2018 17:00 GMT +0200 (Western Europe (DST) Closing time: 30 May 2018 17:45 GMT +0200 (Western Europe (DST) The price listed is an opening bid To participate in the auction and for more information go to: BVA-Auctions

Hydraulic Presses WEKO WE 680-2-20


Hydraulic presses WEKO in 680-2-20 was produced in 1997. Technical parameters: -clamping force: ok. 120 t -base form: 46 cm -distance between columns: 67 cm -making a stroke: 70 cm

Hydraulic Press Brake EHT EHPS 20-40


Pressing force: 200t, press length: 4050mm, column width: 3550mm, installation height: 710mm, stroke: 330mm, inlet depth: 350mm, table width: 300mm, table height: 900mm, speed: 9mm/s, length: 7500mm, width: 3800mm, height: 3540mm, weight: 19.8t.

Hydraulic press brakes Safan CNCS 110-3100


Auction name: Bankruptcy F. van Dam Exploitatie B.V. in Vlaardingen Online auction Start of auction: 18 May 2018 17:00 GMT +0200 (Western Europe (DST) Closing time: 28 May 2018 16:00 GMT +0200 (Western Europe (DST) The price listed is an opening bid To participate in the auction and for more information go to: BVA-Auctions

Hydraulic Presses PHM 63 PHM 63


Hydraulic presses PHM 63. Characteristic data of the press PHM 63:-force pressing: 63 t -the strength of open: 33 t -stroke: 300 mm -closing speed: 136 mm/s. -Ironing speed: 4.3 mm/s. -opening speed: 122 mm/s. -cylinder bottom przet?ocznik, ejector -the power of przet?oku/discard: 16 t -the strength of return: 10 t -speed of the pumping/discard: 13 mm/s. -the speed of return: 21 mm/s. -the clearance between the tables: 600 mm-dimensions tables: 500 x 500 mm -fixing form/cross-slots for screws: M20 -tank capacity: 150 l/dm3 -measured oil temperature in the tank should not exceed: 45 degrees C -electric motor: 4 kW -maximum pressure: 320 kG/cm2, 32 MPa -low pressure: 25 kG/cm2, 2.5 MPa -supply voltage: 3 x 380/220 V -dimensions (l x w x h): 710 x 1580 x 2200 mm -net weight: 2100 kg

Tube Bending Machines SCHWARZE WIRTZ PERFEKT WE 100 D T870


Bender socket key SCHWARZE WIRTZ PERFEKT in 100 D T870 built in 1975. Hydraulic bending machine for tubes with electro-hydraulic control system, as well as with pressure device sliding Rails and with hydraulic mandrel drawing inferences is intended primarily for tube bending with mandrel. Specific data: -maximum capacity: 114 mm tube diameter x 6.3 mm wall thickness (for maximum tensile strength 45 kp/mm2) -maximum torque resistance: 55 cc -minimum pipe diameter: 22 mm -the maximum bending radius: 500 mm -minimum bending radius: 50 mm -the maximum bending angle: 180 degrees -the length of the plate shaft steady rest: 4000 mm -bending direction: right -the maximum bend speed, running forward: 0-3.25 RPM continuous adjustment -the maximum bend speed, running back: 5.4 RPM. constant -main motor power: 22 kW -total power requirement: 25 kW Equipment for bending SCHWARZE WIRTZ PERFEKT in 100 D T870: -hydraulic bending with mandrel -traffic control creep -automatically select angle -the length limiter system with 4 fingers przyporowymi -mandrels to sections: 20 PCs. -dies holding the pipe bending: 16 PCs.

Radial Drilling Machines Z 3050 X 16


Radial drilling machine with 3050 X 16 was built in 1989. This versatile general-purpose machine. It is suitable for drilling, countersinking, reaming, chamfering and thread cutting medium and large items. With the right equipment it is also possible to boring. Technical data drilling machine Z3050 X 16: -the maximum drilling diameter: 50 mm maximum range: 1600 mm -the maximum distance between the axis of the spindle and the column: 1600 mm -the minimum distance between the spindle axis and column: 350 mm -horizontal spindle head on your shoulder: 1250 mm -maximum distance from spindle face to the working surface of the base plate: 1220 mm (1250 mm) -minimum distance from spindle to base plate working surface: 320 mm (350 mm) -vertical stroke in column: 580 mm -arm lifting speed: 0.02 m/sec. -angle of rotation of the arm: 360 degrees -taper in the spindle: Morsea Nr. 5 -spindle speed range: 25-2000 RPM. -number of spindle speeds: 16 PCs. -feed range: 0.04-3.2 mm/Rev. -the amount of feeds: 16 PCs. -extension: 315 mm -depth of feed per rotation of graduated: 122.5 mm -maximum permitted torque on the spindle: 490 Nm -maximum permitted weight spindle: 15680 N -the power of main motor: 4 kW -engine power lifting arm: 1.5 kW -engine power the hydraulic lock: 0.75 kW -Coolant pump motor power: 0.09 kW -overall dimensions (l x w x h): 2500 x 1060 x 2655 mm -weight of the machine: ok. 3500 kg (3900 kg with a column guide)

Water Jet Cutting Machines Bystronic ByJet Pro 3015


Waterjet Bystronic ByJet Pro 3015 from year 2008, was built by the renowned Swiss manufacturer of Bystronic Laser AG. Technical data: -table size: 1500x3000 mm-number: 58.805 h-two cutting heads-maximum pressure: 3600 bar -software: ByVision p. 8004C-ByPump 50 APC water cutting machine Bystronic ByJet Pro 3015 worked under the supervision of the service. The last time the machine listed hydraulic seals.

CNC Turning Machines MATRA FUL 510x1000


CNC lathe MATRA FUL 510x1000 was produced in 2000. CNC lathe-specific data MATRA FUL 510x1000: -CNC control in Polish and German: Fagor 8055TC (the machine you can program the g code or supplement the ready field in marker overlays) machine reads dxf drawings -Turning length: 1000 mm -turning diameter: 510 mm -spindle speed: 5-2000 RPM -Chuck: fi 250 hydraulic head: 8 items VDi30 -extracted Bridge: increases the diameter of component manufacturing -taper tailstock: Morsea 5 -installed power: 13 KVA -size Lathes (l x w x h): 2500 x 1800 x 1900 mm -machine weight: 2.5 tons of equipment: a variety of high-quality knives for turning the company ISCAR

Automatic hydraulic press PAWN 100 G


Hydraulic automatic PAWN 100 G was built in 1991 by HYDOMAT-Warsaw, Poland. Technical parameters of the press PAWN 100 G: -nominal pressure: 100 t Jump Mobile disc: 0-70 mm -number of jumps the disc movement.: 10-60 l/min. -maximum operating pressure: 22.5 MPa -maximum pressure: 4 MPa -installed power: 29 kW -the weight of the press: 5930 kg

FORNO PER FUSIONE Marconi


MELTING FURNACE MARCONI 14 RR MODEL YEAR 1999 Marconi BRAND Melting furnace Marconi; automatic metal loader hydraulic controls; capacity 1400 kg; Double burner; wait 1 and 1; 2 wells; side discharge and cleaning; gas powered for more information contact us at + 39 030 725026 machinery and vision from Monday to Friday from 8:30 to 13:00 and from 14:00 to 19:00

CNC Bending Presses EHT EHPS 11-35


CNC press brake EHT EHPS 11-35 was produced in 1992. Characteristic parameters of CNC presses EHT EHPS 110-3550: -CNC control -maximum pressure: 110 t -maximum length of bending: 3550 mm -maximum length of the pitch slider: 200 mm -the distance between the walls of the body: 3050 mm -outreach: 350 mm -maximum speed bending: 13 mm/s -the maximum distance between a slider and a dining table: 460 mm -the minimum distance between a slider and a dining table: 260 mm -speed: 130 mm/sec. -return speed: 138 mm/sec. -the distance between the bumper: 5-1000 mm -bumper speed: 250 mm/sec. -the height of the bumper over the table: 100-200 mm -a safety distance between the tool and support elements: 128 mm -stop time: 79 ms -the road stopping: 11.3 mm -power of the main engine Y1 + Y2:15 kW -the stopping of the bumper X: 3 Nm -maximum pressure in the hydraulic system: 280 bar -maximum air pressure: 6 bar -oil capacity: 390 l -type of oil: HLPD 46 -operating voltage: three-phase 380 V, 50 Hz -control voltage: 24 V -the total connected load: 21.5 kW -the total rated current: 42 Amp. -maximum switching current: 63 Amp. -machine weight: 9500 kg

Cooking cupboards Meyn Fryer BR5000/400


1 x Meyn fryer. Type - BR5000/400. 400mm wide belt. Frying length - 5000mm. Comes with hold down belt, hydraulic lifting for belts and cover, MC control, thermo-oil heated, oil tank and fire-fighting equipment. Located in Germany.

Carousel Turning Machines (Lathes) RAFAMET KCF 200


Carousel lathe RAFAMET NCC 200 built in 1963. The machine is accurate, suitable for heavy duty. Lathe was made full service. The data characteristic of lathe RAFAMET NCC 200: -turning diameter: 2400 mm (extended from 2250 mm) -height rolling: 1250 mm -slide the slider of a vertical: 1000 mm -engine: 45 kw -dimensions of the machine: 6100 x 5000 x 5500 mm -weight: 50 tons The advantages of the lathe: -New bearings -new oil, cleaned filters-new hydraulic lines -listed lead screw nut -calibration -It has DTR: full technical documentation in Polish language -made was full servicing of the machine

Profiling Systems INTESO S3130T


Perforating machine INTESO S3130T was produced in 2011 year in the Czech Republic. Technical data machine profiles INTESO S 3130 T: -control panel screen: SIEMENS -maximum length: 3000 mm -the maximum cross section profiles dziurowanych: 120 x 80 mm; fi 80 mm -feed automatic linear drive -optical sensor for automatic control of the correct length of workpiece -linear positioning stroke hydraulic cylinder -bezdeformacyjna perforation technology -the possibility of perforation of the profiles of various shapes -program memory perf -perforation, double-sided (in a single operation) and one-sided-automatic lubrication Tool equipment top INTESO S3130 T: -perforated profiles: 40 x 27 x 2; 30 x 30 x 2.0 -punches and dies: 18 mm; 18 x 18 upper matrix, matrix Perforating line INTESO S3130T CE certification.

CNC Hydraulic Plate Shear SAFAN HVR 310-8 TS


CNC guillotine shears SAFAN HVR 310-8 TS produced in 1999 year. The price of the machine is a set of knives. Technical data of the guillotine CNC SAFAN HVR 310-8 TS: -maximum sheet thickness: 8 mm -cutting length: 3100 mm -connection power: 15 kw -connecting voltage: 3 x 400 Volt 50 Hz -maximum working pressure: 300 bar -a safety distance: 12 mm -weight: 9200 kg

CNC Hydraulic Plate Shear LVD HST-E 31/6


CNC guillotine shears LVD HST-E 31/6 produced in 2003 year. Technical parameters of CNC cutter LVD HST-E 31/6: -maximum cutting length: 3000 mm -position the rear bumper: 5-1000 mm + Manual 3.5 – 1000 mm -cut on the rear bumper: 800 x 3000 mm -the thickness of cut material: Steel-6 mm, aluminium-6 mm, St37-6 mm -power: 9.5 kW -the cutter dimensions (l x h x w): 4000 x 1760 x 2730 mm + handles 1120 mm

CNC Turning Machines DOOSAN PUMA 240 MB CNC


CNC lathe DOOSAN PUMA 240 MB produced in 2007 year in Korea. The machine is equipped with a FANUC Series 21i-TB. Cnc lathe allows for effective machining, which allows you to save time and gain accuracy. CNC lathe-specific data DOOSAN PUMA 240 MB: -number of tools: 12 PCs. -the number of driven tools: 2 PCs. -spindle: 65 mm -stroke x axis: 205 mm -stroke y axis: 580 mm -diameter of the handle: 225 mm -rated power: 28.95 kVA -weight: 4140 kg -hydraulic Chuck -horse -four-bed

Universal grinding machines KOMMUNAR 3Y131 (3U131)


Universal grinder for shafts and bores KOMMUNAR 3Y131 (3U131) produced in 1977 year in the Soviet Union. The machine is designed for external and internal grinding of cylindrical surface, and the surface of the flat flange, conical shaped. Grinder allows external grinding machines with automatic grinding wheel, on the headland of the table or a hand-fed and sanding with manual feed. Universal 3Y131 Sanders-specific data: -the maximum diameter of workpiece: 280 mm -maximum length of workpiece: 710 mm -the maximum diameter of workpiece in podtrzymce: 60 mm -height of tusks: 185 mm -maximum weight of workpiece: 55 kg -the largest grinding wheel diameter: 600 mm -rotation speed spindle grinding wheel diameter: 600 Prov 1111 Rev/min -the maximum angle of rotation of the spindle head: 30 degrees -the maximum diameter of the cut: 100 mm -maximum length of cut: 125 mm -spindle speed: 16900 RPM. -the size of the sanding spindle head stroke after bolt: 290 mm -time supply fast grinding wheel: 2 s -the size of the feeding speed, spindle head szlifirskiego from hydraulic drive: 50 mm -feed for one turn of the wheel: 0.5 mm -the value of the plot of limbusa feed precision: 0.001 mm -the value of the parcel for the diameter transverse feed limbusa: 0.005 mm -periodic feed grinding spindle head (headland of the table): 0,0025 – 0,025 mm -fast speed adjusting sanding spindle head: 240 mm/min -the amount of speed of rotation of the product: smooth, bezskokowa speed control -speed range: 40-327 RPM -angle of rotation: 0-90 degrees -dimensions of centres: SM4 -the weight of the grinder with accessories: 6200 kg -size grinding machines (at the extreme position of the moving parts): 5620 x 2585 x 1982 mm

Shears For Sheet Metal Working EUROMETAL HGS 8/3200


Guillotine hydraulic EUROMETAL; HGS 8/3200 produced in 2007. Gilotny specific data HGS EUROMETAL; 8/3200: -thickness of cut metal plate: 8 mm -table length: 3200 mm -weight: 6580 kg -supply voltage: 400 V -installed power: 8.5 kW

Hydraulic Presses ESPE CTO 250/4000


Press brake ESPE CTO 250/4000 produced in 1997. Technical data of the press ESPE CTO 250/4000: -bending length: 4000 mm -bending strength: 250 t

Press 1222


MELTING FURNACE MARCONI BRAND Marconi MODEL RR 14 YEAR 1999 DESCRIPTION-melting furnace Marconi; automatic metal loader hydraulic controls; capacity 1400 kg; Double burner; wait 1 and 1; 2 wells; side discharge and cleaning; gas powered for more information contact us at + 39 030 725026 machinery and vision from Monday to Friday from 8:30 to 13:00 and from 14:00 to 19:00

Laser Cutting Machines BLM ADIGE GROUP LT823D


Laser 3D BLM ADIGE GROUP LT823D for tubes and profiles was built in the year 2010. Technical data laser 3D BLM ADIGE GROUP LT823D: -CNC control: SIEMENS Sinumerik -head: 3D -crystal resonator: Rofin -worked hours: 36979 h Operating data: -the minimum length of the workpieces: 3200 mm -maximum length of details: 6500 mm -maximum weight of workpiece line: 15 kg/m -maximum weight of workpiece total: 100 kg The dimensions of the parts: -round: 12-140 mm -round (optional): 12-152.5 mm -square section side: 12-120 mm -rectangular cross-section and flat oval: maximum described: 170 mm -minimum size: 10 mm -the maximum dimension: 140 mm -the maximum dimension of the side (optional): 150 mm -the maximum difference between the sides: 110 mm -the minimum difference between the sides: 5 mm -maximum load capacity of the loading table: 4000 kg -maximum length of unloading table: 4500 mm Overall dimensions (l x p x h): -the whole installation without content 4500DC K 20/25:15556 x 4600 x 2237 mm -machine: 10514 x 4600 x 2237 mm -the weight of the machine: 9000 kg Hydraulic system: -tank capacity: 25 l -flow rate: 25 l/min -pressure: 70 bar Pneumatic: -pressure: 6 bar -flow rate: > 500 Nl/min

Steam Boiler BIB Cochran Wee Chieftain Steam Boiler


Make: BIB Model: Cochran Wee Chieftain Year: 2007 Condition: Used Machine type: Other Location of machine: United Kingdom Machine Details Steam Boiler Manufacturer BIB COCHRAN,United Kingdom Model Wee Chieftain YOM 2007 Construction standard BS2790-1992 Class 1 Fuel type Oil and Gas Maximum heat input 2820 kW Maximum Continuous Rating 4500 kg/hr Design Saturation Temperature 188 degC Working pressure 6,9 Bar. Design pressure 11 Bar. Hydraulic test pressure 16,5 Bar. Boiler capacity 7900 Litres Control Circuit 220 V Electrical Supply 380 V 3ph 50Hz Inspection history available. This steam boiler is in very good condition, worked for 4 years only. It is sold together with controlling equipment.

LATHE HORIZONTAL DAEWO0 PUMA 240 LC


CNC: FANUC Oi- TB YEAR: 2006 CORSE X 242 mm - 680 mm Z Ø Swing over bed mm 420 rotating diameter 400 mm on the wagon rotating over bed mm 570 turnable chuck Length 648 mm spindle speed 3500 aSA A2-8 hydraulic turntable 3 jaws std 254 mm 18.5 to 22 kW motor power STRUCTURE BANCALE INCLINED AT 45 ° CAST IRON ABOUT WEIGHT KG 5740 TOWER TWO-WAY AUTOMATIC 10 tool stations TAILSTOCK tailstock quill in attack cycle vices 4 diameter tube mm diam 75/80 boost pressure 40 bar 660 kg PRESETTING TOOLS DESCENT / ASCENT AUTO (WITH BUTTON AND CODE M) AUTOMATIC LUBRICATION SYSTEM COOLING SYSTEM HIGH PRESSURE 6 BAR COLLECTION TANK COOLANT 240 LITER TRANSPORTER shavings BELT WITH EXIT ON THE RIGHT CABINET ON UNIT WITH COOLER HALOGEN LIGHTING ZONE WORK LAMP YELLOW ALERT AND END OF CYCLE "CE" in the rules.

FINN POWER F6 25 SB


FINN POWER F6 25 SB punching machine (1998):  In excellent working condition Working hours: Machine On: 56.668 Punching force: 300 kN Max. working pressure: 300 BAR Punching Stroke: Hydraulic Control: Siemens Stroke depth adjustment: Numerically adjustable  Stroke length adjustment: Programmable Ram speed adjustment: Programmable Number of turret stations: 20 Max. Punch diameter: 89 mm Max. material thickness: 8 mm. Maximum blank weight: 200 kgs. Work area w/o repositioning: 1500 x 2500 mm. Work area with repositioning: 1500 x 5000 mm. X-axis travel: 2500 mm. Y-axis travel: 1500 mm. Max. liner travel speed X-axis: 3460 IPM Max. diagonal travel speed: 4500 IPM Minimum programmable increment: 1/10000 Accuracy according VDI/DGQ 3441 Positional Deviation (Pa): +/-.05 mm. Positional scatter (Ps): +/-.025mm. Hit rates max: Mibbling: 800 HPM 1" Increments: 450 HPM Torret confirguration: 20 stations: - Stations D 2x index - Stations B 10x - Stations C 6x (2x index) 2 Multitool divided as following: 1 X MT 24/8 1X MT 10 / 16

ALUMINIUM EXTRUSION PRESS CLECIM 2200 MT - 9 - 229 MM


Qty. 1 Second-hand aluminium extrusion press with billet furnace Mfc.: CLECIM Force: 2200 MT Built: 1986 Dismantled in 7/2017 Billet size: 9” – 229 mm Press size: approx. 2200 mm x 7700 mm Press weight: approx. 100 ton (body) + 50 ton (hydraulic unit) + 20 ton (Billet heater) 30 ton(etc.) = apprpx. 200 ton Hydraulic Pressure: Max. 500 bar (500kg/cm2) Nominal hydraulic pressure: 300 bar (300kg/cm2) Billet furnace Mfc.: TBA Built: 1986

Cutting-To-Length Lines FIMI


band width 100 – 1.300 mm band thickness 0,30 – 3,00 mm tensile strength (until 2,2 mm thickness) max. 1.000 N/mm² yield strength (until 2,2 mm thickness) max. 820 N/mm² tensile strength (until 3,0 mm thickness) max. 800 N/mm² yield strength (until 3,0 mm thickness) max. 650 N/mm² elongation max. 20 % coil weight max. 30,0 t coil inside – Ø 508 / 610 mm coil outside – Ø 600 – 2.100 mm sheet length 250 – 3.000 mm package weight max. 5.000 kg package height incl. palette max. 560 mm inlet speed 15 m/min. working speed max. 90 m/min. pass line height app. 1.100 mm working direction left ? right the line consists of: stocking ramps for 2 coils min. coil outside diameter 900 mm entry coil car centering device decoiler motorized mandrel – Ø 508 / 610 mm press roll motorized outboard bearing Support coil opener telescopic press roll strip centering device crop shear – hydraulically scrap box transfer table leveler 6 HI 2 cassettes with leveling rolls cassette 1: no. – leveling rolls 19 leveling roll diameter 43 mm cassette 2: no. – leveling rolls 19 leveling roll diameter 52 mm no. – back up rolls 5 sets, upper and lower cassette quick change device felt cleaning device tachometer wheel pinch roll at shear entry rolls driven by DC motor rotary shear VECTRONIC pinch roll driven by AC motor strip belt conveyor at the VECTRONIC shear exit place for oiling machine (customer’s supply) sheets conveyors to scrap carriage and stackers deflecting conveyor with 3 positions scrap box movable by AC geared motor scrap carriage for scrap length of max. 1.100 mm connecting conveyor to stacker 1 connecting conveyor to stacker 2 automatic stacker units: stacker 1 non-stop operation for sheets up to 3.000 mm length stacking with wooden pallets stacker 2 non-stop operation for sheets up to 3.000 mm length stacking with wooden pallets lifting stacking platforms 2 pieces for sheets up to 3.000 mm length hydraulic hydraulic oil pressure 120 bar pneumatic normal compressed air pressure 6 bar electric three phase voltage 380 ± 10% V, 50± 2 Hz auxiliary voltage 220 ± 10% V, 50± 2 Hz solenoid valve voltage 24 V DC. total power consumption 480 KVA

Steam Boiler BIB COCHRAN (UK) Wee Chieftain


Construction standard BS2790-1992 Class 1 Fuel type Oil and Gas Maximum heat input 2820 kW Maximum Continuous Rating 4500 kg/hr Design Saturation Temperature 188 degC Working pressure 6,9 Bar. Design pressure 11 Bar. Hydraulic test pressure 16,5 Bar. Boiler capacity 7900 Litres Control Circuit 220 V Electrical Supply 380 V 3ph 50Hz Inspection history available. This steam boiler is in very good condition, worked for 4 years only. It is sold together with controlling equipment. Price 27000 EUR FCA Lithuania

CNC Boring Mills TITAN PAMA AFP 200


TYPE AFP 200 CNC – PAMA LICENCE - MACHINE TECHNICAL SPECIFICATION - Boring spindles diameter: 200 mm - Boring spindles taper: ISO-50 - Boring spindles speed: 1500 rpm - Main motors power: 100 kW - Rams section: 530 x 600 mm - Max. machining length: 19200 mm - Column 1 max. travel (X1 axis): 12800 mm - Column 2 max. travel (X2 axis): 12800 mm - Headstock 1 travel (Y1 axis): 4000 mm - Headstock 2 travel (Y2 axis): 5000 mm - Boring spindle travel (Z axis): 1100 mm - Ram travel (W axis): 900 mm - Travel Z + W: 2000 mm - Feeds on X, Y and Z axis: 0 – 8.000 mm/min - Feed on W axis: 0 – 6000 mm/min - Approx. weight without fix and rotary tables is about 210 t NOTE: 1. The max working extension of Z axis without ram (W axis) is 1100 mm. 2. The machine will work as a tandem unit and totally independent columns as well. STANDARD EQUIPMENT: - GE FANUC 16i-MB CNC - GE FANUC servo / spindle motors and drives - HEIDENHAIN linear measuring system on X, Y axis; - HEIDENHAIN rotary encoder on W axis; - GENERAL ELECTRIC, TELEMECANIQUE and EUROGI electrical equipment - ATOS, MP FILTRI, MARZOCCHI hydraulic equipment - METAL GENNARI telescopic covers on X axis - METAL GENNARI chip conveyor - Universal milling head (manual) type TU-80 – 2 pcs. - Fix tables 6000x2000 mm – 6 pcs. - Displaceable rotary table type MRD 3000x3000/2500 mm (60 tones) – 1 pc. - Displaceable rotary table type MRD 2000x2400/2500 mm (30 tones) – 1 pc

CNC Boring Mills TITAN PAMA AFP 200


TYPE AFP 200 CNC – PAMA LICENCE - MACHINE TECHNICAL SPECIFICATION - Boring spindles diameter: 200 mm - Boring spindles taper: ISO-50 - Boring spindles speed: 1500 rpm - Main motors power: 60 kW - Rams section: 530 x 600 mm - Max. machining length: 19200 mm - Column 1 max. travel (X1 axis): 12800 mm - Column 2 max. travel (X2 axis): 12800 mm - Headstock 1 travel (Y1 axis): 4000 mm - Headstock 2 travel (Y2 axis): 6200 mm - Boring spindle travel (Z axis): 1100 mm - Ram travel (W axis): 900 mm - Travel Z + W: 2000 mm - Feeds on X, Y and Z axis: 0 – 8.000 mm/min - Feed on W axis: 0 – 6000 mm/min - Approx. weight without fix and rotary tables is about 210 t NOTE: 1. The max working extension of Z axis without ram (W axis) is 1100 mm. 2. The machine will work as a tandem unit and totally independent columns as well. STANDARD EQUIPMENT: - GE FANUC 31i-MB CNC - GE FANUC servo / spindle motors and drives - HEIDENHAIN linear measuring system on X, Y axis; - HEIDENHAIN rotary encoder on W axis; - GENERAL ELECTRIC, TELEMECANIQUE and EUROGI electrical equipment - ATOS, MP FILTRI, MARZOCCHI hydraulic equipment - METAL GENNARI telescopic covers on X axis - METAL GENNARI chip conveyor - Universal milling head (manual) type TU-80 – 2 pcs. - Fix tables 4000x2000 mm – 12 pcs. - Displaceable rotary table type MRD 3000x3000/2500 mm (60 tones) – 1 pc. - Adapter L600mm pcs.2 - Universal milling head 20kW – pcs.2

Hydraulic Frame Press INO PRESS 100K-500


Max. pressure: 500t, max. operational temperature: 370°C, oil heated, oil cooled, with a secondary cycle for recirculation of heating output, was overhauled in 2014.

SCHULER ES 400


Mechanical Press SCHULER ES2 400 T Manufacturer: SCHULER Model: ES2 400 T Year of manufacture: 1978 Condition: working. Press capacity 400 T Slide stroke 610 mm slide adjustment 305 mm Die Height 1018 mm bolster size 2743 x 1524 mm number of strokes 20 SPM required power 82 kW table height over floor 400 mm Die cushion capacity 70 T Die cushion stroke 203 m weight app. 120 T Stroke dia at four pressure points: 400 x 190 mm Stroke dia for pressure transformer: for pneumatic: 200 mm for hydraulic: 30 mm extending table: Pulling device in the table: Puller quantity: 2 pieces Pneumatic cushion quantity: 2 pieces Pressure plate surface on cushions: 1170 x 977 mm Impact diameter: 1000 mm Push stroke: 203 mm Total force at pressure above 6 atm. : 70 Mp

Frame presses VILMAR 580 x 350


Code: 0358 Brand: VILMAR Model: 580 x 350 Hydraulic press for mouldings / frames Worktable mm 580 x 350 N° 3 cylinders diameter mm 100 each Platens electrically heated with resistances Opening with electric platens mm 250 Opening without electric platens mm 430 Thrust 100 ton Hydraulic power Overall dimensions : mm 1200 x 1100 x 1850 h

Hydraulic Single Column Press MÜLLER WEINGARTEN CEZ 63.5.10


Pessing force: 63t, swing: 325mm, stroke: 560mm, was rebuild in 1989.

Bench Type Press SERVITEC polystat 200 T


Working surface: 200x200mm, total surface: 250x250mm, clear opening: 145mm, working height: 1200mm, max. pressing force: 200kN, max. hydraulic pressure: 400bar, pump power: 1.1kW, max. plate temperature: 300°C, heating output per press plate: 4kW, length: ...

Repelletising plants PREALPINA 105 mm. forced feeding


PREALPINA 105 mm 35 L/D For LLDPE LDPE HDPE PPL PS EPS ABS etc. Forced feeding unit and 7,5 m3 scrap silo 105 mm Extruder 35 L/D with bimetallic barrel 4 kw vacuum pump for degassing 110 kw d.c. motor on extruder with driverHydraulic screen chang ...

TECNOVA 130 mm. 54 L/D forced feeding


TECNOVA 130 mm. 54 L/D double degassingSiemens 280 Hp d.c. motorsilo with powder extractorextraction augerforced feeding unitextruder with 130 mm screw 54 L/Dn.2 vacuum degassing pumps 10 Hp.CAFI 130/220 screen changer with hydraulic power stationDynisco ...

Injection molding machines Boy 22 M


Year of production: 2002 Total: 9.56 kW Hydraulic pump: 5.5 kW Oil volume: 115 l Machine dimensions: 2.28 x 1.1 x 1.65 Weight: 860kg Closing force: 220 kN Maximum opening: 200 mm Minimum mold height: 200 mm Maximum mold height: 400mm Dimensions  ...

Injection molding machines Arburg 370 C


Year of production: 1998 Total: 23.1 kW Hydraulic pump: 15 kW Oil capacity: 230 l Machine dimensions: 4.20 x 1.47 x 2.05 Weight: 2 080 kg Closing force: 800 kN Maximum opening: 500 mm Minimum mold height: 250 mm Maximum mold height: - mm Dimensi ...

Arburg 570 C


Year of production: 2004 Total: 70.9 kW Hydraulic pump: 45 kW Oil volume: 400 l Machine dimensions: 5.53 x 1.8 x 2.2 m Weight: 7,400 kg Closing force: 2200 kN Maximum opening: 650 mm Minimum mold height: 300 mm Maximum mold height: - mm Dimensio ...

HYDRAULIC BRIQUETTING PRESS OF SHAVINGS FRANZ ARNOLDS SÖHNE HSB 18 - DIA. 180 x 220 MM


Qty. 1 Second-hand hydraulic briquetting press of shavings Mfc.: FRANZ ARNOLDS SÖHNE Type: HSB 18 Built: 1989 Force: 8900 kN - briquettes diameter: 180 mm - height: 100-220 mm - weight Steel: 15-25 kg Gray iron: 16-22 kg Brass: 18-24 kg Alumin ...

Injection molding machines Battenfeld TM 500 / 210


ear of production: 1999 Total: 19 kW Hydraulic pump: 7.8 kW Oil volume: 60 l Machine dimensions: 3.26 x 1.13 x 1.33 Weight: 2 500 kg Closing force: 500 kN Maximum opening: 250 mm Minimum mold height: 150 mm Maximum mold height: 350 mm Dimensions ...

Injection molding machines arburg 320


Year of production: 2000 Total: 23.1 kW Hydraulic pump: 15 kW Oil volume: 120 l Machine dimensions: 3.25 x 1.5 x 1.65 m Weight: 2 270 kg Closing force: 700 kN Maximum opening: 250 mm Minimum mold height: 200 mm Maximum mold height: 400 mm Dimens ...

Injection molding machines arburg 420C


Arburg 420 C Year of production: 2001 Total: 45.8kW Hydraulic pump: 30kW Oil capacity: 240l Machine dimensions: 4.3 x 1.5 x 2.1 m Weight: 3850kg Closing force: 1300kN Maximum opening: 500mm Minimum mold height: 250mm Maximum mold height:- Dimen ...

Injection molding machines Battenfeld BA1000T


Year of production: 1998 Total: 36 kW Hydraulic pump: 19 kW Oil volume: 200 l Machine dimensions: 3.68 x 1.2 x 1.85 m Weight: 3,200 kg Closing force: 1000 kN Maximum opening: 355 mm Minimum mold height: 200 mm Maximum mold height: 450 mm Dimensi ...

Injection molding machines BOY 55A


Total: 18.4 kW Hydraulic pump: 11 kW Oil volume: 58 l Machine dimensions: 3.20 x 1.0 x 2.05 m Weight: 2 420 kg Closing force: 550 kN Maximum opening: 400 mm Minimum mold height: 250 mm Maximum mold height: 650 mm Dimensions of clamping plates: 56 ...

Injection molding machines ARBURG 221


Celkovo : 14,1kW Hydraulické ?erpadlo: 7,5 kW Objem oleja: 80 l Rozmery stroja: 2,5 x 1,5 x 1,9 m Hmotnos? 1110 kg Uzavieracia sila 350 kN Maximálné otvorenie 200mm Minimálna výška formy: 150mm Maximálna výška formy: 300mm Rozmery upínacích dosie ...

Hydraulic Presses Schuler SH 110-4,5x2,5


Total press weight: 162500 KG Nominal force: 1000 kN Maximum stroke length: 1350 mm Mounting height: 2500 mm Shutter speed: 144 mm / s Max. operating speed: 68 mm / s Operating speed at nominal force: 31 mm / s Max. Tool base WxH: 4400 x 2300 mm W ...
Find used machinery dealers in your country