33 offers

found in all categories

Category: 301 injection moulding machines
New in: 2012
Location: Country-es Spain, 47151 Valladolid
Seller: MachinePoint

Injection moulding machine for preforms Hypet 400 HPP 4.0 P120/120 EE 120 96 cavities Preform Weight (Max): 11,3 g Neck Type: 29/25

Category: 301 injection moulding machines
New in: 1999
Location: Country-DE Germany, 09456 Annaberg-Buchholz
Seller: Gerd Seidler Werkzeugmaschinen

closing pressure: 36500 kN clamping plate: 3480 x 3090 mm cylinder head volume: 14152 cm³ Injection pressure: 1925 bar This ad was created with MODUL MWS - the software solution of LogoTech.

Category: 310 spare parts for plastic machinery
New in: 2010
Location: AG
Seller: Optimisense LLC

FULLY REFURBISHED AND READY TO INSTALL CALZONI MOTOR FOR HUSKY LX300 & XL300 TON PET MACHINES RIVA CALZONI OLEODINAMICA MR3600 PN (BAR) 250 MADE IN ITALY MORE THAN ONE AVAILABLE EXWORKS MIAMI AND SOUTH AMERICA CALL FOR DETAILS OPTIMISENSE

Category: 301 injection moulding machines
New in: 1998
Location: Country-DE Germany, 91257 Pegnitz
Seller: Complast Gmbh

screw size:115 mm injection shot weight in Polysterol:5858 g clamping force:20000 kN : INJECTION UNIT: screw size:115 mm max. swept volumne:6.232 cm³ injection shot weight in Polysterol:5.858 g/PS injection pressure:2.205 bar CLAMPING UNIT: closing pressure:2.000 t tie bar distance:1.900 x 1.500 mm mould hight - min.:1.000 mm mould hight - max.:1.700 mm opening stroke:2.600 mm CONTROL: microprocessor control:Polaris screen text:deutsch / german Manual:deutsch / german EQUIPMENT: robot interface: core pull:4 without hopper / without water distributor:ohne OTHER DATAS: pump drive power:233,2 kW Pump drive rating: A Cilinder heating capacity:78 kW Cilinder heating capacity: A Capacity hot runn ...

Category: 310 spare parts for plastic machinery
New in: 2010
Location: AG
Seller: Optimisense LLC

FULLY REFURBISHED AND READY TO INSTALL CALZONI MOTOR FOR HUSKY SX600 TON PET MACHINE RIVA CALZONI OLEODINAMICA MR6500M PN (BAR) 250 MADE IN ITALY MORE THAN ONE AVAILABLE EXWORKS MIAMI AND SOUTH AMERICA CALL FOR DETAILS OPTIMISENSE

Category: 301 injection moulding machines
New in: 1988
Location: Country-DE Germany, 42781 Haan
Seller: PLAMA Engineering GmbH

PET, 32 cavities mould for preforms 25,5gr., dryer Somos D 400, roboter, preform cooling, 5.000-6.000 pieces/hr.

Category: 301 injection moulding machines
New in: 2006
Location: AG
Seller: Optimisense LLC

For sale once in a lifetime 13800 working hours Hypet 300 year 2006 Husky PET 72 cavities Hypet 300ton Model P100/110 E120 FULL System WATER CHILER, RESIN DRYER, DEHUMIDIFIER, AND COMPLETE MOLD 72 cavities PCO 26G WITH HOT RUNNER DISMANTLE, COMMISSIONING AND STARTUP ALSO AVAILABLE UPON REQUEST 400V 50HZ AVAILABILITY: IMMEDIATE EXWORKS ASIA ONLY 13800 HOURS ON IT, ALMOST 20 MONTHS

Category: 301 injection moulding machines
New in: 2001
Location: Country-DE Germany, 42781 Haan
Seller: PLAMA Engineering GmbH

hydr. ejector, core, electronic, poer demand 65kW, capacity appr. 12.200 caps/h, moulds for milk bottles

Category: 301 injection moulding machines
New in: 2007
Location: Land-de DE
Seller: GloCon TST GmbH

Preform-Injection Molding System with the capacity to also produce heavier preforms (up to 55 g) on 72-cavity-tooling with the biggest injection unit on board available for this platform (extruder screw diam.140 mm. The "package"includes: one resin drying and dehumidifying combo: DryPack, model DP1100/11, with 6,500-l-silo designed and made by EISBAER-Trockentechnik GmbH. The combination needs less power and less space and is easier to set up.

Category: 301 injection moulding machines
New in: 2002
Location: Land-de DE
Seller: GloCon TST GmbH

Preform Injection Molding Machine sized for preform molding tools of up to 72 cavities @ 45 g unit weight. Equipped with large injection unit (120-mm-extruder, 110-mm-shooting pot for max.shotweight of 3.344 g PET). Complete process package includes: MOTAN-resin dryer and EISBAER-dehumidifyer.Maintained at top level availability (maintenance log) up to last shot before decommissioning in November. Equipment set up for shipment in GloCon. 32, 48 and 72-cav.-molds available.

Category: 303 blow moulding machines
New in: 2002
Location: Land-de DE
Seller: GloCon TST GmbH

Preform Injection Molding Machine sized for preform molding tools of up to 72 cavities @ 45 g unit weight. Equipped with large injection unit (120-mm-extruder, 110-mm-shooting pot for max.shotweight of 3.344 g PET). Complete process package includes: MOTAN-resin dryer and EISBAER-dehumidifyer.Maintained at top level availability (maintenance log) up to last shot before decommissioning in November. Equipment set up for shipment in GloCon. 32, 48 and 72-cav.-molds available.

Category: 306 moulds
New in: 2000
Location: Land-us US
Seller: Optimisense LLC

Husky used PET preform mold in good working order Cavities 48 Neck finish PCO 28mm 1816 Weight: 52.10 Grams 48 cav Hot Runner: also available (contact us)

Category: 306 moulds
New in: used
Location: AG
Seller: Optimisense LLC

Husky used PET preform mold in good working order Cavities 48 Neck finish PCO 28mm 1816 Weight: 43.02 Grams 48 cav Hot Runner: also available (contact us)

Category: 306 moulds
New in: used
Location: AG
Seller: Optimisense LLC

Husky used PET preform mold in good working order Cavities 48 Neck finish PCO 28mm 1816 Weight:27.71 Grams 48 cav Hot Runner: also available (contact us)

Category: 306 moulds
New in: used
Location: Country-us USA, 1016 Hialeah - Miami
Seller: Optimisense LLC

Edible Oil Preform Mould Cavities: 32 Product 1,5 liters Neck Finish 29mm Working Hours: 43.843 Hours Preform Weight: 41 Grams + Core Set for 36 Grams Husky Gline and Xline compatible

Category: 306 moulds
New in: used
Location: Country-us USA, 1016 Hialeah - Miami
Seller: Optimisense LLC

Edible Oil Preform Mould Cavities: 32 Product 1 liter Neck Finish 36mm Working Hours: 20.207 Hours Preform Weight: 31.5 Grams Husky Gline and Xline compatible

Category: 306 moulds
New in: used
Location: Country-us USA, 1016 Hialeah - Miami
Seller: Optimisense LLC

Edible Oil Preform Mould Cavities: 32 Product 1.5 liters Neck Finish 36mm Working Hours: 51.486 Hours Preform Weight: 42 Grams Husky Gline and Xline compatible

Category: 301 injection moulding machines
New in: 2007
Location: AG
Seller: IPR-PETMachinery

Husky HyPET 300 72-cavity Preform Injection Moulding system, year 2007 Consisting of: * Husky HyPET 300 P100/110 E120 preform injection moulding machine * Plastic Systems Resin Dryer * Plastic Systems Material Hopper * Plastic Systems Mould Dehumidifier * Plastic Systems Material Vacuum blower * Plastic Systems Outfeed conveyor * 72-cavity Husky Hot Runner Working hours: TBC. System is in good working condition, well maintained and can be inspected in production until February 2019.

Category: 301 injection moulding machines
New in: 2005
Location: Land-fi FI
Seller: JADE Trading OY

Injection Molding Machine for PET Preforms, Husky G 600 PET This is a complete preform production line from granule feeding to readymade PET bottle preform conveyor. The equipment was made by Spanish Husky Injection Molding Systems S.A on year 2005 and it has a nominal capacity of 18600 preform with weight 44 gram for 1.5 liter PET bottles. Neck format is 28 mm Light BPF - see attached preform format. The equipment was upgraded on 2012 with complete new HMI control panel which contains IBM compatible PC, new software and complete machine went through thorough service by Husky. The line was closed in 2014 and has kept installed and in warm condition. Equipment is in very good operat ...

Category: 301 injection moulding machines
New in: 2006
Location: Land-fi FI
Seller: JADE Trading OY

Injection Molding Machine Husky Hylectric H300 for PET bottle closures Two complete PET bottle cap production lines both equipped with Husky Hylectric H300 injection molding machines. Both production lines include Italian Plastic Systems made granule pneumatic transport, mixing and feeding systems as well as Green Box made cap cooling drums. Equipment was manufactured in year 2006 is designed to produce 28 mm PET caps according to standard light BPF 28 mm at speed of 36 000 caps / hour. Both machines were stopped in 2014 but are still installed and powered. Technical data Machine #1 type: Husky H300, RS95/80, ser. ?2853225 Manufacturing year 2006, total operating hours 44918 Mo ...

Category: 301 injection moulding machines
New in: 2000
Location: Land-fi FI
Seller: JADE Trading OY

Injection Molding Machine for PET Preforms, Husky G 600 PET, year 2000 This is a complete preform production line from granule feeding to readymade PET bottle preform conveyor. The equipment was made by Husky Injection Molding Systems S. A. (Spain) on year 2000 and started to manufacture in 2001. The Human-Machine Interface is an IBM-compatible PC. The nominal capacity of 19000 preform with weight 44 gram for 1.5-liter PET bottles. Neck format is Light BPF . Equipment is on good condition and ready for delivery. The delivery includes: - Injection Molding Machine G 600 PET P120/130 E 140 Husky - Dispenser of the dye MDT3/C Piovan - Air Conditioner Piovan - Water circulation pump G ...

Category: 301 injection moulding machines
New in: 1988
Location: Country-DE Germany, 73525 Schwäbisch Gmünd
Seller: IDS Trade GmbH

Injection molding machine Husky T 225 Year of construction: 1988 Clamping force: 2250 kN

Category: 301 injection moulding machines
New in: 1996
Location: Land-sk SK
Seller: BASTA

Manufacturer: Husky Model: E2700 RS140/140 Iuclid: 2700 tonnes Manufacturing year: 1996 Max Pressure: 1495 Intensification: 9236 Screw diameter inches: 5.51 Max stroke: 23.62 inches Max injection speed: 3.9 inches Tie Bars HxV: 1700 The Vertical Bar: 2150 HxV;: 2600x3050 Die Height: 1000-1900 Daylight: 2900 Clamp style: Hydraulic quick mould change

Category: 301 injection moulding machines
New in: 2003
Location: AG
Seller: IPR-PETMachinery

Husky G600 96-cavity PET Preform Injection Moulding system, year 2003 Consisting of: * Husky G600 P120/130 E140 Preform Injection Moulding machine * 3-stage Husky Take Out Robot * PET Resin Dryer and Hopper * 96 cavity Preform Mould for 20-22g 38mm 3-start preforms – pitch 152×60 Technical details: – max. Shot weight : 5,575 cm3 – 5,076 gm – max. throughput : 840 kg/h – Working hours : 24,200 hrs (end December 2017) In good condition. System will be available in week 30, 2018. Can be inspected in production until then.

Category: 301 injection moulding machines
New in: 2012
Location: Land-kr KR
Seller: TMS CO.,LTD

*Specification -Clamping force : 3150 ton -Screw diameter : 150/120mm -Injection weight : 12720/6450?g -Daylight : 5500mm -Clamping stroke : 3600mm -Tie abr distance : 2240 x 1800mm -Manufactured year : 2012

Category: 310 spare parts for plastic machinery
New in: used
Location: Country-us USA, 1016 Hialeah - Miami
Seller: Optimisense LLC

Xycom HMI 9450 Husky HPN 705922 Husky Xline Machines as XL300 LX300 SX500 SX600 and others. Exworks Miami USA contact us: j.plaul@optimisense Whatsapp +5491157143569 USA Mobile +1.305.831.8888

Category: 310 spare parts for plastic machinery
New in: 2000
Location: Country-us USA, 1016 Hialeah - Miami
Seller: Optimisense LLC

Husky HPN 726619 FOR SALE XYCOM 9960 Operator Station HMI for Husky G-line, Index-line & others PET Preforms Injection Molding Machines. Exworks Miami USA contact us: j.plaul@optimisense Whatsapp +5491157143569 US Mobile +1.305.831.8888 Skype: optimisense For more info and pictures join our FB group HUSKY USED PET PREFORMS RELATED MACHINERY

Category: 301 injection moulding machines
New in: 2004
Location: Land-us US
Seller: Optimisense LLC

Husky Hylectric 400 ton Injection Molding System Model HL400 RS95/85 - AUG 2004 (2) machines available, same model and year. Working hours 70.000 Robot Krauss Maffei LR-S 150 (optional) 400 Volts 50 Hz / Polaris HMI Distance between columns Height - Width (mm): 920mm x 920mm Mold thickness Min - Max (mm): 500mm / 1120mm Mold Max Opening (mm): 1300mm Screw diameter (mm): 85mm Excellent condition, can be inspected on production. Reasonable offers will be considered, with or without robots.

Category: 301 injection moulding machines
New in: 1999
Location: AG
Seller: IPR-PETMachinery

Husky GL 300 72-cavity PET Preform Injection Moulding system, year 1999 – consisting of: * Husky GL 300 P100/110 E100 preform injection moulding machine – Date: 29/11/1999 * Husky 3-Stage Take Out Robot * Plastic Systems DR215HT Resin Dryer * Plastic Systems H4000 Material Hopper * Plastic Systems DS 800 Mould Dehumidifier (2006) * Outfeed Conveyor Mould included: * 48 cavity Husky Hot Runner The above system is currently installed and can be inspected in production.

Category: 301 injection moulding machines
New in: used
Location: Land-at AT
Seller: Lovric Maschinenhandel e.U.

complete line

Category: 301 injection moulding machines
New in: 2011
Location: Land-at AT
Seller: Lovric Maschinenhandel e.U.

Category: 301 injection moulding machines
New in: used
Location: Land-de DE
Seller: Joko Spezialtiefbau

Used injection molding machine with Siemens controller, Manufacturer of Husky Data plate: Load supply no. 1 400V 207 A, 50 Hz, 3 p + N + PE system Biggest motor 110 A Total load heating 90 A Short circuit intermittent performance 35 kA Load supply Nr 2 Type of machine: LX225 RS60/50 Relay individually on request. The machine can be visited like after consultation with us.

Category: 301 injection moulding machines
New in: 1998
Price 8.000 €
Location: Land-de DE
Seller: Joko Spezialtiefbau

Used injection molding machine, Manufacturer of Husky Injection Systems Ltd. Type: GL225RS60/50 Year of constr.: 23.04.1998 400 V, 96 A greatest engine, 42 A total load heating Functional The machine can be visited like us. Price: 8.000,00 plus VAT, from stock Sale even after parts possible

You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)