We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
Model
(Manufacturer: HOMAG)
used
Key data: 4200 mm, 1500 mm
Power Control PC85, Woodwop, ATC 12-speed, A lot of accessories, Gluing unit, ... 2 retractable and extendable changing tables, two-part clamping table with 2 processing stations for pendulum occupancy, edge height max. 65 mm, chip and remnant disposal, drill head 17 spindles, main spindle 14.5 KW, speed 24000 1/min Incl. many accessories Condition: dismantled
used
Key data: 20 mm, 60 mm, 8365 mm
I am selling a fully equipped edge banding machine HOMAG EDGETEQ S-500 KAL370 Ambition 2484, built in 2019: Configuration: Input stop servo-motor adjustable Manually adjustable joint milling Edge banding with preheating tanks 2 pcs. Material pressure zone can be adjusted by servo motor Pneumatically adjustable cross-cut saws Heavy milling top + bottom pneumatically adjustable Round unit 4-motor servo motor adjustable R2 / second set R1 included Swivel groove saw unit Radius scraper blade Multiradius servo motor adjustable Scraper blade surface can be pneumatically adjusted Polishing brushes Separator injection at the front Clean injection at the rear Working height adjustable by servo motor Material height 8-60mm Edge material thickness 0.4-12 (20)mm Feed speed 16 to 25m/min. Overall length including feed plate 8365mm Mileage status 833,000 meters. Input appar ...
used
CNC vertical machining center DRILLTEC Type: V-200 Optimat BHX055 Year of construction: 2021 only 564 operating hours Workpiece length 200 - 3050 mm incl. roller conveyor Workpiece width 70 – 850 mm Workpiece thickness 12 – 60 mm Workpiece weight max. 35 kg Speed of axes X/Y 50 m/min., Z 15 m/min. Vertical Drill Gear V13/32 mm High Speed 2 rows of drill bits, each with 5 drill bits in parallel in X-direction 1 row of drill bits with 5 drill bits in Y-direction Total drill length 70 mm Drill diameter max. 35 mm Spindle spacing 32 mm Horizontal drill gear with 4 spindles (2 right, 2 left) in X-direction, can be called up individually, drill spacing 32 mm Horizontal drill gear with 2 spindle (1 right, 1 left) in Y-direction, can be called up individually Groove saw in X-direction, diameter 100 mm Tool change spindle HSK 63 and converter 10 kW Tool diamet ...
used
pneumatic carcass press with 4 pressure elements from above 2 sides working area 3200 x 1600 - YOC 1975
used
Single-sided edge banding machine for machining of straight workpiece edges and for banding and post-processing of various edge materials in longitudinal and transverse passing. Automatic conversion from radius to chamfer and different edge and workpiece thicknesses. Control Power Control PC 22 OVERVIEW OF UNIT ASSEMBLY: – RELEASE AGENT SPRAYING UNIT – JOINING MILLING UNIT – GLUING PART A20 WITH 2 ROLLS Application unit PU 65 (Teflon-coated for PU gluing) – CROSS-CUT UNIT HL84 – PRE-MILLING UNIT – FK11 SHAPE MILLING UNIT – FREE SPACE UNI MILLING UNIT UF10 – PROFILE SCRAPER PN10 – FINISHING UNIT (with detergent information) – Feed rate 20 m/min – Total length 8635 mm 2. WORKPIECE AND EDGE PARAMETERS: – Workpiece width min: – For workpiece thickness 12-22 mm ¦ 60 mm – For workpiece thickness 23-40 mm ¦ 105 mm – Workpiece protrusio ...
used
Key data: 4175 mm, 1875 mm, 300 mm
Console table with LED suction cup position indicator, 8 manually movable brackets (length 1340mm) each with 3 vacuum cups, 6 support rails Workpiece clamping via vacuum pump 100/140m³/h LED system for vacuum clamps, Z-laser (ceiling laser) for contour display Working area X 4175 mm Working range Y up to 1875 mm (milling with 25mm drm), 1600mm all units Working range Z 300 mm Drill head MPU (with C-axis): 30 spindles: 20 of them vertical ; 10 horizontal drilling spindles, Groove saw max. 200mm drm Main spindle 15 kW, liquid-cooled, with vibration sensor and C-axis 360 grd. , Interface for Flex-5+ unit 18-fold tool changer (plate) at the bottom and 10-fold WZW at the top Adapter unit included: – Flex 5+ sawing, drilling, milling unit Control Power-Control PC 85 with Woodwop 5.0, also for AV station incl. cooling unit in SS Tool transfer station Some of the tools shown, ...
used
Technical Details: - X axis working area: 3050 mm - Y axis working area: 1250 mm - Main Electrospindle power: 10 KW - Number of controlled axes: 3 axes - Total number of drilling spindles: 25 - Total number of tool changer positions: 4
used
Fixed stop side on the left. Brief description of the equipment: - Fixed stop side left - Workpiece transport device - Upper pressure - Control Power Control PC22 - Release agent spraying unit - Joining milling unit, 2 x 3 kW - Gluing part A20 Basic for rolls up to 3 mm and strip goods up to 20 mm, with melting unit with granulate container and quick-clamping system - Cross-cut unit, 2 x 0.8 kW, with pneum. Dissimulation - Lubricant spray agggregat - Pre-milled aggreagt 1.5 kW, pneum. adjustable - Mould milling unit FK13, 2 x 0.4 kW - Universal milling unit 4 kW, controlled, with infinitely variable axis - Multi-plastering device MN21 autom. - Finishing unit FA11, with finishing device, detergent application and buffing unit, pneum. adjustable -Noise protection - Free space for additional processing units Further equipment information: - Machine stand throughout f ...
used
I am selling a stacking system HOMAG BARGSTEDT TBH22/D/25/12, built in 2001. Destacking system One-sided guide Spout also suitable for pallets. Postural head vacuum shoe system. Vacuum system (with pump) Automatic loading. Entry table motorized roller system Exit table on the floor with lifting mechanism motorized roller system Exit table front roller system Enters feed roller stazion for quilted material. Security fences fully complete ! Working capacity Approx. 8 cycles / min Available right away. Ready for use, possible to test. With CE certificate and full documentation.
used
I sell a center saw with continuous HOMAG FPL620/06/15/P S/LQ. Year of construction 2007. Working width 204 - 1304mm Element height 12 - 60mm Cutting width 100mm Blank length 300mm Feed speed 10 - 40 m/min. Configuration: 1 + 1 pcs. cutting units top + bottom 1 pcs. cutting unit flexible top/bottom 1 pcs. cutting unit flexible top/bottom 1 pcs. grooving unit with stop and softforming function Material pressure tape with conveying from above. Continuous machine. Condition Very good. Available same.
used
Homag saw unit Brand: Homag Type: 000W04206041 Year of construction: 1998 SKU:4-060-24-0165 2.056.10.3021 Saw blade: ø180 mm Nmax: 10,000 rpm
used
Homag saw unit Brand: Homag Type: 000W04206041 Year of construction: 2000 M-No.: 4-02078 000W04206041 Nmax: 9,900 rpm
used
1 Quickmelt incl. evaluation device level. Interchangeable heads used, good condition 16 pcs. Interchangeable heads FK 11/13 devices, exchangeable at the top below.
used
Interchangeable heads used, good condition 16 pcs. Interchangeable heads FK 11/13 devices, exchangeable at the top below. 1 Quickmelt incl. evaluation device level.
used
Overview of equipment: - Workpiece support scissor design with roller support, 1000 mm extendable - Infeed ruler automatically adjustable - Fixed stop side left - Inlet interlock pneumatically controlled - Upper pressure via driven composite V-belt - Height adjustment electric - Workpiece transport device via transport chain with rubber support - Release agent spray unit top/bottom - Joint milling unit 2 x 3 kW - Gluing part A20 with 2 rollers, consisting of workpiece preheating, Quickmelt application unit with quick clamping system, 2-roll magazine, pressure zone C (auto-adjustable, with 1 pre-press roll and 6 repress rollers) - Cross-cut unit HL84 0.8 kW, with autom. Adjustment chamfer/straight as well as pneum. Adjustment flush/protrusion caps - Pre-milling unit 1.5 kW, pneum. Adjustment of bündi/protrusion milling machines - Mould milling unit FK11 with autom. Adjustme ...
used
I sell radius copy milling unit for edges suitable for CNC machining center machines with edge banding HOMAG, WEEKE, BIESSE, SCM, MORBIDELLI, HOLZ-HER, IMA, FELDER, MASTERWOOD, BUSELLATO, etc. n 12,000 rpm. Radius R2mm. HSK63 posture. Available the same.
used
Overview of the assembly: - Release agent spray unit top & bottom - Joining milling unit 2 x 4 kW - Glued part with workpiece preheating, 2 rolls, pressure zone C and QA34 application unit for PU with quick clamping system - autom. Adjustment pressure zone - Preparation for Lasertec activation unit - Hl84 cross-cut unit 0.8 KW - pneum. Adjustment pre-milling unit - Pre-milling unit Bf10 1.5 kW - Mould milling unit Fk11 Manual - Autom. Adjustment of chamfer to radius milling machines - Rolling side probe FK - Pneumatic adjustment FA11 for lateral displacement from the working area - Multi-drawing blade MN 21 autom. for a maximum of 5 different profiles. - Finishing unit (glue joint drawing blade and swabbing ridge) - Detergent spray unit top & bottom - powerControl PC22 Workpiece and edge parameters: - Workpiece width without edge min: - For workpiece thickness ...
Aggregate for 4-Achs CNC to the extension for the 5-th axis
used
With feeder and destacker Wemhöner 184.
used
Length: 11,250mm, width: 5250mm, height: 2600mm.
used
Max. workpiece dimensions: 3000x1050mm, connected load: 31kW, length: 5750mm, width: 3750mm, height: 2400mm.
used
Current: 50A, nominal voltage: 400V.
used
Current: 63A, nominal voltage: 400V.
used
Connected load: 31kW, length: 5750mm, width: 3750mm, height: 2400mm.
used
Max. workpiece length: 3600mm, max. workpiece width: 1400mm, length: 8750mm, width: 5250mm.
used
Includes a loading table, a single-sided sizing and edge processing unit (KFL 23) lengthwise/crosswise and a return unit. For sizing and edge processing of worktops, side panels and shelves in small batches up to batch size 1. Workpiece parameters: Length range: 300-4500mm for worktops, 250-2600mm for side panels/shelves, 250-3100mm for niche back panels. Width range: 240-1200mm, thickness range: 12-60mm. Workpiece weight: max. 50kg. Material: chipboard, MDF. Surfaces: Melamine, laminate, CPL 0.6-0.8mm. Documentation available.
used
Exchange units for contour milling HOMAG
used
Description: ATTENTION: Location 35614 Aßlar, Germany Well-maintained HOMAG Optimat BAZ 311/52/K CNC machining center with HOMAG Optimat TBA 330/20/16 vacuum feeder, main spindle with Flex5 interface and web edge press unit. ,The main spindle was replaced at the beginning of March 2024 and the costs were EUR 19,000! HOMAG Optimat BAZ 311/52/K, machine no. 0-201-21-4391 HOMAG Optimat TBA 330/20/16, machine no. 0-205-21-4383 Workpiece length: - Single occupancy with tool diameter. 25mm max. 5200mm - Pendulum assignment with tool diameter. 25 mm max. 2150 mm with pendulum occupancy Workpiece width front stop: - max. 1525 mm with tool diameter 25mm - max. 1525 mm with web edge pressing unit - max. 1450 mm for all units Workpiece width stop at the back: - max. 1730 mm with tool diameter 25mm - max. 1650 mm with web edge press unit - max. 1600 mm for all units Main spindle: ...
used
Description: - Workpiece length  , All units max. approx. 5200 mm  , Milling cutter 25 mm max. approx. 5375 mm - Workpiece width  , Rear stop for all units max. approx. 1400 mm  , Rear stop cutter 25 mm max. approx. 1550 mm  , Front stop for all units max. approx. 1150 mm  , Front stop milling cutter 25 mm max. approx. 1220 mm - Main spindle 18.5 KW with C-axis  , Speed 0 - 24000 rpm - 72-speed chain changer - Milling spindle 6 KW - LED console position indicator - Chip conveyor belt and articulated belt conveyor (Further tools and units for the tool changer are not included within delivery. Availability depends on the delivery of the new machine. A transport rack from HOMAG is required for transportation of the dismantled machine. This results in costs of EUR 6,500,-- (plus tax). After the transport rack has been returned to Helmut Meier (Germany Burgthann), ...
used
Description: The machine will not be available until around May 2024. Basic machine Continuous machine stand for setting up the processing unit Workpiece support with roller rail, extendable approx. 800 mm Glue roller drive for feed stop Glue container lift for feed stop Workpiece-operated glue container clamping Adjustable infeed guide Pneumatically controlled infeed stop Workpiece transport device Transport chain 80 mm wide Precision running and guide surfaces hardened Transport chain magnetically braked Top pressure driven by composite V-belt Manual height adjustment Digital position indicator Technical data Operating voltage: 400 Volt, 50/60 Hz Feed rate: 18 - 25 m/min Feed rate with FK11 profile cutter: max. 20 m/min Working height: 950 mm Working width for workpiece thickness 22 mm: min. 60 mm Working width for workpiece thickness 40 mm: min. 105 mm ...