1000 offers

maximum number of results exceeded > 1000
please refine your search

New in: 1979
Price: request quote
Location: 63322 Rödermark
Seller: Mieth Maschinenhandel

Technical data: -The full steel ST 60 drilling power 35 mm -Drilling capacity GG 25 40 mm -Tapping ST 60 M 27 -Spindle mount MT 3 -Spindle diameter 35 mm -Quill diameter 75 mm -Quill stroke 200 mm -9 spindle speed 125-2000 R/min -6 drill feeds 0.06 - 0.6 mm / U - Min / max distance spindle - table approx. 300 / 700 mm -Drilling RADIUS min / max approx. 140 / 750 mm -Table height min. / max. 600 / 1050 mm -Table size approx. 1000 x 650 mm -Drive 400 / 500 V / 3 kW -Space requirement approx. B 1200 x H 2500 / 2600 X 2100 mm -Weight approx. 1900 kg -with:-thread cutting device -hydr. Columns + bracket clamp -Coolant system -Central lubrication more

New in: 2018
Price: request quote
Location: Bayern - 89264 Weißenhorn
Seller: SKM Industriemaschinen

saw blade diameter: 315 mm cutting diameter: 120 mm total power requirement: 1,3 / 1,8 kW weight of the machine ca.: 230 kg Capacity 90° Round: 75 mm Capacity 90° Square: 70 mm Capacity 90° Rectangle: 95 X 60 mm Capacity 45° Round: 65 mm Capacity 45° Square: 60 mm Capacity 45° Rectangle: 70 X 55 mm Saw Size: 250 x 2.00 x 32 mm Boron Oil: 20 l Main Motor: 1.3/1.8 kW Saw Speed: 25/50 - 45/90 m/min Voltage: 380 V Vise size: 120 mm Working Hight: 1.300 mm Length: 700 mm Width: 450 mm Height: 670 mm Weight: 160 kg Equipments: - Metal circular saw - 2-step gearbox engine - double miter circular saw until up to 45 ° left / right - new saw blade - Coolant device - Attack - Machine base more

New in: 1986
Price: request quote
Location: 63322 Rödermark
Seller: Mieth Maschinenhandel

Technical data: -Pressure capacity 350 T. -Max working width 5050 mm -Stand through 4100 mm -Max mounting height approx. 400 mm -Stroke approx. 240 mm -Table width approx. 350 mm -Height approx. 1200 mm -Drive 400 V / 37.0 kW - space requirement approx. B H 5500 x 3390 x H 2300 mm -Weight approx. 36000 kg -with:-control CYBELEC DNC 50 Y 1 + 2 BJ. 2012 -Rear gauge - universal matrix -Highlight tool more

New in: 2016
Price: request quote
Location: Bayern - 89264 Weißenhorn
Seller: SKM Industriemaschinen

: 179 L/min cylinder: 1 St. Pressure power: 8 bar Suction power: 179 l / min Capacity approx: 70 l / min Maximum pressure: 8 bar Tank capacity: 24 l Cylinder / settings: 1/1 Speed: min 2,850 ¹ Engine power: 1,1 kW Electrical connection: 230 V Compressor type: OL1850 Weight: approx. 20 kg Dimensions (L x W x H): approx. 580 x 270 x 600 mm Sound pressure level: 95 DB (a) at a distance according to standard EN ISO 3744 (RL 2000/14/EC) -Portable piston compressors with direct drive -Secure handling thanks to rubber tyres -Standard with pressure switch, pressure gauge, Quick-disconnect connector and connection cable with plug -Electric motor with overload protection -Aftercooler, therefore less  ... more

New in: new
Price: request quote
Location: Land-DE Germany, 44369 Dortmund
Seller: VEI-Engineering GmbH

High temperature chamber furnace, make VEI max. temperature: 1.200°C useable dimensions (w x h x d): 750 x 500 x 1.100 mm heating power: electrically, 42 kW more

New in: 2016
Price: request quote
Location: Deutschland
Seller: K&S Werkzeugmaschinen OHG

faceplate diameter: 1.600 mm swing diameter: 2.000 mm max. turning height: 1.400 mm Control: Fanuc 32i-A max. torque at faceplate: 23863 Nm max. cutting force: 3.000 kgf max. workpiece weight: 10.000 kg table:: Table diameter: 1.600 mm Tble speed: 0.7~280 min/-1 Gear steps: Auto. 2 -step C-Axis:: Min. index angle: 0,001 ° Cutting feedrate: 0~1.200 °/min Max. speed: 3.333 min/-1 turret slide:: Spindle taper: ISO 7/24 No.50 Tool size: 32x32 mm Mill spindle speed (VTC): 30~3.000 min/-1 Max. mill spindle torque (VTC): 235 Nm Ram cross section: 220 x 220 mm Travel & feeds:: X-axis tarvel(Saddlehorizontal): 1.900 mm Z-axis travel(Ram Vertical): 900 mm Vertical travel of cross rail: 700 mm X/ ... more

New in: used
Price: request quote
Location: Land-de Germany, 49808 Lingen
Seller: EL-Maschinenbörse GmbH

Trepenschalung HOWAL Varioflex 18/150 Sharp-edged version - high Visual concrete quality, Since excess head production 18 steps Climb 15-20 cm Occurs 25-31 ^ cm Easy pedestal mounting in any levels possible! more

New in: 2016
Price: request quote
Location: Deutschland
Seller: K&S Werkzeugmaschinen OHG

faceplate diameter: 2.000 mm swing diameter: 2.500 mm max. turning height: 2.000 mm control: Fanuc 32i-A max. torque at faceplate: 40403 Nm max. cutting force: 3.000 kgf max. workpiece weight: 12.000 kg Table:: Table diameter: 2.000 mm Tble speed: 1~200 min/-1 transmission ratio: Auto. 2 -step C-Axis:: Min. index angle: 0,001 ° Cutting feedrate: 0~1.200 °/min turning speed range: 3.333 min/-1 Ram Head:: Spindle taper: ISO 7/24 No.50 Tool size: 32x32 mm Mill spindle speed (VTC): 30~3.000 min/-1 Max. mill spindle torque (VTC): 280 Nm Ram cross section: 240 x 240 mm Travel & feeds:: X-axis tarvel(Saddlehorizontal): 1.500 mm Z-axis travel(Ram Vertical): 1.500 mm Vertical travel of cross ra ... more

New in: used
Price: request quote
Location: Land-de Germany, 49808 Lingen
Seller: EL-Maschinenbörse GmbH

Storey curving staircase formwork, make HOWAL ALPHA TOP Built in 2000 rectangular linksgewendelt Slope variable 17 - 19 cm Occurs 26 cm Barrel width 100 cm more

New in: 2016
Price: request quote
Location: Deutschland
Seller: K&S Werkzeugmaschinen OHG

faceplate diameter: 1.200 mm swing diameter: 1.400 mm max. turning height: 1.400 mm control: Fanuc 32i-A max. torque at faceplate: 17885 Nm max. cutting force: 3.000 kgf max. workpiece weight: 8.000 kg Table:: table diameter: 1.250 mm Tble speed: 0.9~360 min/-1 Gear steps: Auto. 2 -step C-Axis:: Min. index angle: 0,001 ° Cutting feedrate: 0~1.200 °/min Max. speed: 3.333 Ram Head:: spindle taper: ISO 7/24 No. 50 Tool size: 32 x 32 mm Mill spindle speed (VTC): 30~3.000 min/-1 Max. mill spindle torque (VTC): 235 Nm Ram cross section: 220 x 220 mm Travel & feeds:: X-axis tarvel(Saddlehorizontal): 1.600 mm Z-axis travel(Ram Vertical): 900 mm Vertical travel of cross rail: 700 mm X/Z-axis cu ... more

New in: 2002
Price: request quote
Location: Land-it IT MONTICHIARI
Seller: EURO MACHINE TOOLS srl

DIAM. STUD. 130 mm. X-TRAVEL: 3000 MM. Y-TRAVEL: 2000 MM. Z-TRAVEL: 1600 MM. W-TRAVEL: 700 MM.(SPINDLE) AXES B: 0.001 DEGREES (ROT.TABLE) TABLE DIM. MM. 1800x1600 HIGH PRESSURE SPEC table: 15000 KG. SPINDLE SPEED r.p.m. 2500 POWER MOT. Chuck: 28/39KW SPINDLE TAPER: ISO 50 AUT.TOOLS CHANGER 60POS. CNC HEIDENHAIN TNC 426 more

New in: used
Price: used machinery auction RESALE 150 €
Location: Land-de DE Germany, 46342 Velen-Ramsdorf
Seller: Surplex GmbH

Weight approx.: 75 kg Dimensions (l x w x h) approx.: 700 x 300 x 260 mm Description: Milling angle table, Table surface 680 x 235mm, hight 250mm more

New in: 1966
Price: request quote
Location: 63322 Rödermark
Seller: Mieth Maschinenhandel

Technical data: -mot 2. driven roller - MOT. Delivery of the Middle roller -Shaft diameter 75 mm -Shaft length approx. 200 mm -Roller height adjustment screw without removing -Work speed 5 + 10 m / min -Bending performance - l and T - iron exterior at R 1200 mm 90 x 9 mm -L - iron inside the R 1200 mm 75 x 10 mm -I 1000 mm I flat R 160 mm -U - iron legs outward R 1000 mm U 140 mm -U - iron thighs inward R 1200 mm U 140 mm -Flat iron flat R 450 mm 160 x 25 mm -Flat iron upright R 700 80 x 15 mm -Square steel R 450 45 x 45 mm -Tubes with special tool R 900 mm 70 x 5 mm -with: - standard set of bending rolls - powered 400 V / 8 kW -Weight approx. 2300 kg -Space re ... more

New in: 2003
Price: request quote
Location: Land-de Germany, 32469 Petershagen
Seller: Bödeker Holzbearbeitungsmaschinen GmbH

Manufacturer: Nölle + Nordhorn, Year: ca 2003, Length mm: 3000, Width mm: 700, Lifting hight approx. mm: ca.450, Feeding speed max m/min: 5-15, Feeding speed continous adjustable: yes, Year :ca 2003 more

New in: 2006
Price: 12.990 €
Location: Schleswig-Holstein
Seller: In.Ha.TEC Vertrieb & Service UG

2 piece used robot cells 2 conveyor lines - high speed - base H = 400 trolley FW0L - turning device RP 1000A3-RCi - support H = 2600 / 2750 incl. 4 power sources- Inspection and testing are like possible up to the KW 39/2018 on request. more

New in: 2005
Price: request quote
Location: Land-de Germany, 32469 Petershagen
Seller: Bödeker Holzbearbeitungsmaschinen GmbH

Manufacturer: Bargstedt Werkstückrückführung, Type: TFU 2, Year: 2005, Control: automatisch, Conveyor belts Qty: 1, Conveyor belt 1 mm: ca.6500, Belt width 1 mm: 800, Conveyor belt 2 mm: Rollgang , Belt width 2 mm: 800, Work piece width min-max mm: 80-1200, Min.-max. workpiece length in mm: 200-2500, Min.-max. workpiece height in mm: 8-60, for left machine: yes, Working hight adjustable mm: yes, Luftkissentisch pneumatisch: yes, Belt transfer: yes, Drain roller operation: yes, Work piece width min-max mm: 80-1200, Min.-max. workpiece length in mm: 200-2500, Min.-max. workpiece height in mm: 8-60, Year :2005 more

New in: used
Price: 10.000 €
Location: Land-pt PT Marinha Grande
Seller: occasionmachines

Arm: 2000 mm, Speed: 11.2-2000 rpm Radial drilling machine of high precision of buses Czech Republic Manufacture more

New in: 2013
Price: 62.000 €
Location: Land-de DE
Seller: DRINK Getränkemaschinen GmbH

description: \nThe Machine in good condition. Compact installation dimensions, high speed possible (50.000bl / h) \nChecking of: 2 side walls (another 2 side walls could be added) \nInlet control, finish control, base control, outlet control, HF caustic and restdual liquid detection, separate module for external bottle recognition (height, contour, color) .. \nYOM. 2013. It was reconditioned in 2016 + modified. \n \nThe machine is still in operation until February 2019. \n \nThe Machine in good condition. Compact installation dimensions, high speed possible (50.000bl / h) \nChecking of: 2 side walls (another 2 side walls could be added) \nInlet control, finish control, base control, outlet c ... more

New in: 2016
Price: request quote
Location: Land-cz Czech Republic, 60200 Brno
Seller: AMARON s.r.o.

13-axis ULTIMATE with pneumatic feeding - max 3m Hours in operation: 5250 Control system: Mitsubishi M700 Max spindle passage: 65 mm 21 driven tools Machine dimensions: 2900 x 1900 x 1900 mm Machine weight: 4400 kg Accessories: Driven tools (ER-20 collets) Collet chuck Tool holder Chip conveyor Bar feeder High pressure coolant pump Floor coolant pump Auto lubrication system Manual more

New in: used
Price: request quote
Location: Land-de Germany, 32683 Barntrup
Seller: Wehrmann Holzbearbeitungsmaschinen GmbH & Co.KG

Basic machine complete with:\r\n\r\n- with automatic feed\r\n- circular saw unit 2,2 kW (3 hp) with pneumatic\r\n height adjustment\r\n- Axial mechanical adjustment of the saw, adjustment field \r\n stepless from 0 to 2 mm \r\n- high-precision double ball bearing slides for the\r\n moving parts\r\n- pressure beam controlled by two lateral\r\n pneumatic cylinders, equipped with torsion bar \r\n- plastic cable chain\r\n- connecting piece Ø 120 mm \r\n- HM- saw blade Ø 180 mm \r\n- Lubrication unit with filter complete with gearbox\r\n and pressure gauge on the air line\r\n- service tools\r\n- safety devices\r\n \r\ntype: FILA 31 \r\nUsable cutting length 3.100 mm \r\n \r\ntype: FILA 37 ... more

New in: 2003
Price: request quote
Location: Land-DE Germany, 51149 Köln
Seller: AS Maschinenhandel

Grinding length 1500 mm Grinding width 550 mm Workpiece height mm Control Siemens 840 D Size 1900 x 550 mm Table stroke 1500 mm Table UK spindle distance 500 mm Cross travel 580 mm Cross delivery 0.002 0.06 mm Grinding spindle drive 0.5-5 kW Grinding spindle speed of continuously 4200 - 42000 RPM Spindle diameter 120-85 mm Grinding spindle drive 0.8-8 kW Grinding spindle speed continuously 2100-21000 RPM Spindle diameter 120-100 mm Total power 25 kW Machine weight approx. 8 t Space requirement approx. Description 2003 overhaul & modernized by ELB for the grinding of feed bodies - equipped with: -CNC control Siemens 840 d -2 vertical grinding spindles for grinding of ... more

New in: used
Price: request quote
Location: Land-de Germany, 32683 Barntrup
Seller: Wehrmann Holzbearbeitungsmaschinen GmbH & Co.KG

CNC boring- and milling machine\r\nBrand: Vitap\r\nType: Point K2 TOP 2.0\r\nNew machine\r\n\r\nWith throughfeed panel boring from the bottom and automatic panel return to the operator\r\n\r\nThree controlled axes:\r\nX Axis - Panel movement seamlessly by DDT( Double Dynamic Transport) with boosted brushless motor\r\nY Axis - Boring head movement\r\nZ Axis - Panel boring\r\n\r\n- Double 0 panel reference: New generation laser to detect the beginning and the end of the piece. The program can readjust the drilling at the bottom of the piece to have a perfect flush between the vertical and horizontal pieces.\r\nThe laser is composed by a transmitter and receiver to avoid any error caused by dar ... more

New in: 2013
Price: request quote
Location: Land-DE Germany, 56428 Montabaur
Seller: TMP Meurer Industry & Consult GmbH

Totalisator : 15033560 (07/2018) 16 stations, high pile up to 52 cm Format max 35 x 50, min 10.5 x 21 cm Paper weight 20 - 1000g / m² Power: Standard 1: 1 to 3200 working cycles / h with standard accessories and the following additional equipment Automatic transport calibration for B3 and up to 62 cm station depth B3 machines Format input in display, Simatic Multi Panel Touch screen Performance enhancement through route optimization for smaller formats up to 6000 cycles / h Synchronization Vacuum: table - 1: 2 for booklet production Misssed and double sheet detector ultrasound. on each station B3 format extension from 50 to 62 cm Special device to be able to drive 2 x A5 in a  ... more

New in: used
Price: request quote
Location: Land-de Germany, 32683 Barntrup
Seller: Wehrmann Holzbearbeitungsmaschinen GmbH & Co.KG

Sanding machine\r\nBrand: Ecoline \r\nType: Windsand 4\r\nNew machine\r\n\r\nfor sanding panels and glued frames. \r\n\r\nTechnical data:\r\n\r\nDimensions workpieces:\r\nMin. length: 500 mm\r\nMax. width: 1600 mm\r\nMax. height: 120 mm\r\n\r\nNumber of shaft: 7 pcs.\r\nPower: 12 kW\r\nAir pressure: 6-8 bar\r\nSuction studs: 5 x Ø120mm\r\nSuction power: 6000m³/h\r\n\r\nUnits\r\n2 verticale swivable brushes (left / right), Ø 350 mm, for sanding the outer sides of the panels and window frames. \r\nPower of both brushes 0,55 kW \r\n\r\n1 Deep brush, Ø 240 mm, for sanding the inner verticale sides and front sides of window frames. \r\nPower 0,55 kW\r\n\r\n1 upper sanding lamella roller for s ... more

New in: 2005
Price: 25.000 USD
Location: Land-cn CN SHANGHAI
Seller: SHANGHAI HELM IMP.&EXP. LTD

We can offer you 3 sets of Barmag winders for high tenacity yarn ,manufacture year 2005.4 ends,chuck length:1200mm.bobbin length : 300mm.very good working condition. Serious buyers contact us. more

New in: used
Price: request quote
Location: Land-de Germany, 32683 Barntrup
Seller: Wehrmann Holzbearbeitungsmaschinen GmbH & Co.KG

Basic machine complete with:\r\n- circular saw unit 2,2 kW (3 hp) with pneumatic\r\n height adjustment\r\n- Axial mechanical adjustment of the saw, adjustment field \r\n stepless from 0 to 2 mm \r\n- high-precision double ball bearing slides for the\r\n moving parts\r\n- pressure beam controlled by two lateral\r\n pneumatic cylinders, equipped with torsion bar \r\n- plastic cable chain\r\n- connecting piece Ø 120 mm \r\n- HM- saw blade Ø 180 mm \r\n- Lubrication unit with filter complete with gearbox\r\n and pressure gauge on the air line\r\n- service tools\r\n- safety devices\r\n \r\ntype: FILA 31 \r\nUsable cutting length 3.100 mm \r\n \r\ntype: FILA 37 \r\nUsable cutting length  ... more

New in: 1985
Price: request quote
Location: St. Gallen
Seller: MJS-LINE GmbH

Power : 170 bonds with an operator Format (cm): max. 380 mm long, max. 350 mm high, 36 mm thick Equipment / Additional information: Power requirements 380 V three-phase, 50 Hz, 2.44 kW (incl. Dust extraction) Space consumption approx 2 m2 Slot capacity: up to 0.8 mm deep and up to 36 mm (not adjustable) Glue pot and rolles easy to remove Paper dust extraction Controlled 32 l container capacity, interval circuit of the machine Heated cancel angle more

New in: used
Price: request quote
Location: Land-de Germany, 32683 Barntrup
Seller: Wehrmann Holzbearbeitungsmaschinen GmbH & Co.KG

Cleaning brush machine\r\nMake: OMMA\r\nType: SPX-1400\r\n\r\nWorking from top and bottom\r\nwith cross running cleaning system\r\n\r\nUsable work-piece width 1400 mm (or on request)\r\nWorking height 905 mm\r\nMax. work piece thickness 150 mm\r\nMin. work Piece length 300 mm\r\nSpeed 5 ? 25 m/min.\r\nBrushing speed approx. 92 m/min.\r\nOperating side: right\r\n\r\n\r\nSystem components\r\n\r\n- upper and lower cross-cleaning-system with driven belt, equipt with special nylon brushes\r\n\r\n- special cleaning system for smallest particles,\r\nwith adjustable sprayer and extra storage tank for the cleaning fluid\r\n\r\n- mechanical wiping of the brushes\r\n\r\n- separate drives for the brushi ... more

New in: used
Price: 9.500 €
Location: Land-pt PT Marinha Grande
Seller: occasionmachines

Lathe 2 m Schaerer Made in German German lathe 2 m between points With motorized advances With bushing, turret monoculars High precision lathe with inverted bus system that does not create as much wear. more

New in: used
Price: request quote
Location: Land-de Germany, 32683 Barntrup
Seller: Wehrmann Holzbearbeitungsmaschinen GmbH & Co.KG

New semi automatic contour edge bander\r\nBrand: Vitap\r\nType: Eclipse PRO\r\n\r\n- For shaped concave, convex and straight panels 10-60 mm thickness, 1-3 mm band thickness\r\n\r\nGluing station\r\n- Glue and tape application on big and small shaped panels\r\n- Equipped with glue pot with 1 Kg capacity\r\n- Quick assembly system\r\n- 2 rollers to copy the shape of the piece\r\n-1 tilting support roller to enable the exit of the panel after banding\r\n- Glue application amount is adjusted via a knob\r\n- Set up of the glue temperature\r\n- Automatic guillotine for coiled material up to 3 mm x 45 mm\r\n\r\nThree kind of works:\r\n-Encoder\r\n-Encoder + laser\r\n-Encoder to overtake the board  ... more

New in: 2003
Price: request quote
Location: Land-DE Germany, 44805 Bochum
Seller: VVB-Concept UG

Run machine body as rigid welded steel construction with high static and dynamic stiffness of the welding assemblies wear-resistant, self-lubricating guide systems and maintenance-free bearings for upper cheeks and bending beam Guide Drive the top and bending flange on both sides about controlled powerful drive motors with worm gearboxes Force of the beam on both sides about tooth segments Positioning of the upper cheek way measuring system Slope of the upper cheek 45° Adjustment of the lower beam, mechanical Adjustment of the bending beam reduction mechanical See attachment for PLC Siemens Tool set including: Terminal rail for upper cheek straight rail mechani ... more

New in: used
Price: request quote
Location: Land-de Germany, 32683 Barntrup
Seller: Wehrmann Holzbearbeitungsmaschinen GmbH & Co.KG

Grooving machine with through feed panel\r\nBrand: Vitap\r\nType: Grooving\r\n\r\nWorking from the bottom and automatic return to the operator or to the back side\r\n\r\nCHARACTERISTICS\r\n\r\nFour controlled axes:\r\nX Axis - Panel movement with two dinamic clamps\r\nY Axis - Grooving head movement with pinion and precision rack\r\nZ Axis - Movement with screw at spherical recirculation\r\n- Newly patented, high rigidity operating unit movement on Y and Z axis.\r\n-n.2 shafts for saw blades and presetting with rapid hook HSK\r\n\r\nPositioning Axes:\r\nX axis two clamps wit dinamic movement with brushless motors and reducer epicycloidal\r\nY Axis brushless motor with epycicloidal reducer\r\ ... more

New in: used
Price: 1.554 €
Location: Weilheim Teck
Seller: A-Z Maschinenwelt

Description: They offer here on a super functional band saw for metal, from the House of Pedrazzoli which of course stands for quality high quality. It is in good condition. There are signs of wear. This machine provides you with a precise, accurate, and powerful processing. Technical data: Brand: Pedrazzoli Type: Brwon SN 220 Blade: 220 mm V: 380 KW: 1.76 HZ: 50 more

New in: used
Price: request quote
Location: Land-de Germany, 32683 Barntrup
Seller: Wehrmann Holzbearbeitungsmaschinen GmbH & Co.KG

TRIMMING MACHINE \r\nMake: VITAP\r\nType: RC 92\r\nNew machine\r\n\r\nTechnical data:\r\n- 2 high frequency motors HP.0,75 (Kw 0.55) each. 12000 RPM, in vertical opposite position with inverter;\r\n- 2 cutter heads with cutters one knife straight 15° the other radius 3mm;\r\n- CE standards \r\n\r\n\r\nOptions (available for a surcharge):\r\n- Couple of cutters (without knives)\r\n- Set 8 knives 15 degrees angle and radius 2 mms.\r\n- Set 8 knives 15 degrees angle and radius 3 mms. \r\n- Pneumatic lifting of the upper motor\r\n- Optional for panels max. high 120 mms\r\n\r\n more

New in: 2001
Price: request quote
Location: Land-de DE
Seller: Innovac GmbH

X-travel: 610mm, y-travel: 420mm, z-travel: 450mm, tool mount: BT40, number of tool slots: 30, max. rotational speed: 12000/min, pallet dimensions: 550x750mm, weight: 10.5t, including chip crusher and high pressure station. more

New in: used
Price: request quote
Location: Land-de Germany, 32683 Barntrup
Seller: Wehrmann Holzbearbeitungsmaschinen GmbH & Co.KG

New hot press, hydraulically\r\nBrand: ITALPRESSE \r\nType XL/6 30-13 PE\r\n\r\n- Electrical - heating plates: 3000 x 1300 mm \r\n- Total pressure: 120 to. \r\n- Number of hot plates: 2 pc. \r\n- Number of floors: 1 pc. \r\n- Stroke: 350 mm \r\n- Day light opening: 350 mm \r\n- All-round feeding \r\n- Number of cylinders: 6 pc. \r\n- Diameter of cylinder: 85 mm \r\n- Power consumption (hydraulic unit): 3 kW\r\n- Electric hot plates of solid hard aluminium with installed heating elements \r\n- Heating power 22 KW \r\n- High pressure isolation plates \r\n- Operating temperature: 90° C. \r\n- Max. Temperature: 120° C. \r\n- Supply: 400V/50 Hz \r\n- Safety accordance with CE standard \r\n\r\nS ... more

New in: 2003
Price: request quote
Location: Land-de DE
Seller: Innovac GmbH

Number of tool slots: 42, hollow taper: HSK 63A, tool mount: SK 40, max. tool length: 280mm, tool diameter: 78-160mm, tool weight: 5-8kg, compressed air supply: 5.5bar, compressed air consumption: 1000Nl/min, control: SIEMENS SINUMERIK 840d, including chip conveyor, 2 rotary axis PEISELER AWUP 160, high pressure plant and drum filter KNOLL, tool changer is in need of repair. more

New in: used
Price: request quote
Location: Land-de Germany, 32683 Barntrup
Seller: Wehrmann Holzbearbeitungsmaschinen GmbH & Co.KG

CONTOUR EDGE BANDER \r\nMake: VITAP\r\nType: BC 92\r\nNew machine\r\n\r\nTechnical data:\r\n- For straight and curved pieces (convex and concave)\r\n- To glue pieces thickness 10-60 mms., in PVC, melamine, veneer, plastic laminate and solid wood;\r\n- Nr. 2 glue spreading rollers;\r\n- Cutting guillotine up to 3 mm. thickness;\r\n- Band length measuring by means of a digital electronic counter;\r\n- Encoder for high precision cutting of the tape ( for shaped closed pieces);\r\n- End switch for cutting of the tape for straight pieces;\r\n- 2 tape feeding speed ( 3 - 7 mts.min);\r\n- Solid Phenolic table easy to clean and with no transmission of heat;\r\n- Manual / Automatic band cutting devic ... more

New in: used
Price: 93.440 €
Location: Neumarkt
Seller: Berger International

MULTIPROP Post Shores are used as individual props and – in combination with MULTIPROP frames – as shoring towers or load towers under tables. Compared with tubular steel slab props, the aluminium MULTIPROP carries significantly higher loads whilst, at the same time, has a very low dead weight. With different frame sizes, square or rectangular shoring towers can be optimally adapted to suit individual construction site conditions. The frames also serve as platform beams and side protection for working levels. High load-bearing capacity Fewer individual props per m² through permissible leg loads of up to 100 kN (according to type test) Well thought-out details With self-cleaning thre ... more

New in: 2001
Price: request quote
Location: Land-de Germany, 32683 Barntrup
Seller: Wehrmann Holzbearbeitungsmaschinen GmbH & Co.KG

Drilling line\r\nBrand: Weeke, Bargstedt\r\nType: BST 100\r\nYear: 2001\r\n\r\nData of the plant:\r\n\r\nMaterial\r\nWorkpiece dimensions\r\nLength: min. 240mm, max. 2500mm\r\nWidth: min. 210mm, max. 1050mm\r\nThickness: min. 8mm, max. 40mm\r\nWeight: max. 100kg\r\n\r\nWorkpiece surface: laminated, coated, smooth, separable and absorbend\r\n\r\nOrder:\r\nMax. 4 parts in a row\r\nMax. 4 parts next to each other\r\n\r\nTBH/EQ/25/12/A/S\r\nBargstedt loading station single sided crosswise\r\nPitless for continous loading of processing lines (fix edge left hand side)\r\nup to 50kg weight and basic power max 12 cycles/min.\r\n\r\n1 Driven stack roller conveyor, positioned in front of the stacking  ... more

New in: 1999
Price: request quote
Location: Land-de DE ENGER
Seller: SAMPLAST INC.

4.5" Welex single Main extruder 30D vented. 150 hp DC motor. Hydraulic Screen changer Maag 56/ 56 gear pump 15hp dc Static mixer., Welex ABA feedblock. 2" , 24D Welex side mounted coextruder with 20 kW dc motor. 900 mm wide EDI flex lip sheet die . 1040 mm wide Welex 3 roll Cooling/ polishing stack Highly Polished Chrome Rolls 3 zone pump group 3-Roller Take-off conveyor 2 x Rubber Roll Take-off, with safety covers for the Rolls Intermediate Winder Inline ILLIG RDM 70K, age 1999, with Siemens S5 PLC Controls :- Thermoformer with auto-start facility Indramat Servomotor Indexing Max. material width 730 mm Max. Indexing length 300 mm Top & Lower heaters, total connected load  ... more

New in: used
Price: request quote
Location: Land-de Germany, 32683 Barntrup
Seller: Wehrmann Holzbearbeitungsmaschinen GmbH & Co.KG

Single sided automatic edge bander\r\nBrand: Vitap\r\nType: Quartz 5.6\r\nNew machine\r\n\r\nGeneral characteristics\r\nMonolithic steel frame of the machine for the high rigidity of the structure.\r\nFeeding industrial chain with rubber blocks.\r\nSliding of the blocks on 2 hardened and grinded steel guides.\r\nUpper steel clamp with 2 rows of rubber-coated rollers turning on closed bearings\r\nManual movement of the upper steel clamp, with automatic positioning of the operating units, for the panel thickness changing.\r\nMechanical digital readout of the panel thickness.\r\nPLC for switching of on/off the motord and the glue tank.\r\nGlue tank with automatic stand-by of the temperature.\r\ ... more

New in: 2007
Price: request quote
Location: Land-de DE
Seller: EBSEOS GmbH

Semi-automatic seaming machine Indosa MP 160 for preserve, tin and composite cans This machine is mainly made of stainless steel and anodized hard aluminium and can use for laboratory , trade and insustry; The machine is simple for operation with automatic, cam-controlled seaming operation; Adjustment of can height by hand lever; Changeover to other can diameter by easy and fast exchanging of format parts. Output: up to 600 cans/h Diameter of can Ø: 40 - 160 mm Hight of cans: 20 - 220 (280) mm Compressed air: 5 bar Weight: approx. 35 kg Dimensions (WxDxH): 660 x 350 x 550 mm Elekt.supply: 0,3 kW more

New in: used
Price: request quote
Location: Land-de Germany, 32683 Barntrup
Seller: Wehrmann Holzbearbeitungsmaschinen GmbH & Co.KG

Hot melt contour edge bander\r\nMake: VITAP\r\nType: SMART\r\nNew machine\r\n\r\nTechnical datas: \r\n- 1 glue spreading roller 60 mm high;\r\n- Guillotine to cut bands up to 3 mm thickness;\r\n- Solid Phenolic table;\r\n- Electronic temperature control;\r\n- Foot pedal cutting system;\r\n- End-switch cutting system;\r\n- 2 tape feeding speed (4 or 8 mts./min);\r\n- Plastic cups to raise the piece above the table\r\n- Standard accessories;\r\n- CE standards.\r\n more

New in: 2001
Price: 26.000 €
Location: Nähe Nürnberg
Seller: W&T EFRA

Mori Seiki GV503 Year of construction: 2001 Control: MSG-805 M including Chip breaker High pressure station Machine weight: 10,500 kg Devices, clamping devices and tools are not included in the sale price. Price: â?¬26.000 (net), VB. Location close to Nuremberg Machine is fully functional can be visited at any time under current us. more

New in: used
Price: request quote
Location: Land-de DE Barntrup
Seller: Wehrmann Holzbearbeitungsmaschinen GmbH & Co.KG

On the photos, we show you an double end tenoning machine \r\nfor laminate flooring products. \r\nThis machine was set in production in November in a few days.\r\n\r\nFor building up such a machine, there is the best to take \r\nan IMA basic machine. Such a basic stand is available in nearly \r\nevery necessary length. \r\nSo it is possible to have a free choice of positioning the different units \r\nand also to leave a free space, if wanted, for later need of units. \r\nAll motors are new and the heavy duty IMA stands give the needed \r\naccuracy to the milling units and guarantee a repeatability.\r\nNext to the standard digital counters, there are also \r\nhigh accuracy measurement devices ... more

New in: 2018
Price: 8.000 €
Location: Land-pt PT Marinha Grande
Seller: occasionmachines

Lathe New 1000 KDIG NEW With 3-axis digital Technical Details: Distance between centers in mm 1000 Included Accessories: Chuck diameter 200 mm 4Grampos 200 mm plate Fixed and movable bezel Flat Plate Different accessories Max. Turning with bridge/cava mm 400 Max. Turning diameter without bridge/cava in 505 mm Max. Cross slide in 240 mm Rotary shaft speed in min-1 (12) 45-2000 High and low speeds spindle bore in mm 55 tree spindle cone MK6/MT6 Cone point MK4 longitudinal feed (27) 0.06 -2.78 crossfeed (22). 01-. 72 spindle stroke in mm 100 metric in mm/r -14 0.8 inch thread 2-28 Max. turret 20x20mm MOTOR DATA S1 engine power in W 2000 S6 engine performa ... more

New in: used
Price: request quote
Location: Land-de Germany, 32683 Barntrup
Seller: Wehrmann Holzbearbeitungsmaschinen GmbH & Co.KG

Vertical panel saw\r\nMake: Putsch\r\nType: SVP 950 M\r\nNew machine\r\n\r\nDescription:\r\nThe SVP 950 M is a vertical saw for cutting panels in vertical and horizontal direction. The frame of the saw is completely welded and it has a working table for the workpieces which consists of aluminium fences with plastic inserts.\r\nTo prevent a contact with the saw blade while doing horizontal cuts, the frame is equipped with an automatic moving support. The lower workpiece supports consist of aluminium and have lowerable transport rolls.\r\nThe saw beam and the saw unit can be adjusted and moved manually. Therefore the saw beam can be fixed at 6 vertical sawing positions. \r\nThe simple shift of ... more

New in: used
Price: request quote
Location: Land-DE Germany, 92714 Pleystein
Seller: Mirrotech Glas & Spiegel GmbH

Data: -maximum glass size: 2500 mm -can be used to transport -fits on a 3 m-high truck Special price: â?¬4.900 more

New in: used
Price: request quote
Location: Land-de Germany, 32683 Barntrup
Seller: Wehrmann Holzbearbeitungsmaschinen GmbH & Co.KG

Splicing machine with glue thread\r\nMake: Casati\r\nType: Z 2000\r\n\r\ntechnical details:\r\n\r\narm length: 1.200 mm\r\nveneer thickness: 0,4 - 2 mm\r\nfeed speed: approx. 5 - 40 m/min.\r\nnoise measurement: 73,5 dB\r\ncompressed air consumption: 0,05 l/min\r\nworking pressure: 6-8 bar \r\noverall dimensions: 2.050 x 600 x 1.400 mm\r\n\r\nThis model is specially designed for the users requiring high production and considerable working speed also when using difficult materials.\r\n\r\n- stepless change of heater oscillation angular \r\n speed, independent of the linear feeding speed\r\n- accurate adjustment of the feeding friction \r\n pressure\r\n- adjustment of the starting point and sto ... more

You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)
more types: