63 offers

found in all categories

Category: 1300 other machines and plants
New in: 2005
Location: Land-de DE
Seller: Innovac GmbH

Bonding process: ultra sound wedge-wedge bonding, program size: 10.000 connection, x-travel: 255mm, y-travel: 180mm, z-travel: 28mm, wire strength: 17.5-85µm, bonding force: 10-150cN, connected load: 2.2kW, length: 1400mm, width: 920mm, height: 1820mm, weight: 1.1t, CE marking is missing and needs to be replaced.

Category: 205 boring mills, machining centers
New in: 1993
Price 980 €
Location: Land-de DE
Seller: Theodor Eberlei GmbH & Co.KG

Category: 102 lathes
New in: 2000
Location: Land-de DE
Seller: HBN Werkzeugmaschinen GmbH

Working area left side – with motor spindle on top, turning spindle 1 (OP 10) chuck diameter mm 750 turning diameter mm 630 swing mm 750 workpiece height – incl. height of chuck mm 500 Cross slide – Working area left side travel – X-axis mm 500 travel – Z-axis mm 500 rapid motion – X-axis mm/min 30.000 rapid motion – Z-axis mm/min 20.000 Turret head disc turret head with static tools station 8 shaft diameter - DIN 69880 VDI mm 60 Working area right side – with motor spindle below, turning spindle 2 (OP 20) chuck diameter mm 750 turning diameter mm 630 swing mm 750 workpiece height – incl. height of chuck mm 500 travel – X-axis – motor spindle below mm  ...

Category: 205 boring mills, machining centers
New in: used
Price 950 €
Location: Land-de DE
Seller: Theodor Eberlei GmbH & Co.KG

Category: 206 presses
New in: used
Location: Country-de Germany, 32683 Barntrup
Seller: FWB-Maschinenhandel GmbH

Hole plate press Hess vertical Type: Multipress Year of construction: 1998 Length 3700 mm x height 2800 mm 6 hand-operated hydraulic clamping cylinders Surface of the clamping cylinder 140 x 80 mm 4 stop stamp may Stop rails from left and below

Category: 206 presses
New in: 1979
Price 4.250 €
Location: Land-de DE
Seller: Theodor Eberlei GmbH & Co.KG

Category: 206 presses
New in: 1988
Price 2.210 €
Location: Country-de Germany, 79618 Rheinfelden
Seller: MATEC system+technik GmbH

Press Hess KP-2000 hydraulic Masch. No. 3357N Dimensions: 100 x 130 x 235 cm (without pallet) Work area per cell: 21 x 31 cm 3 cells Weight: 350 kg Built in 1988 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4952 Eriswil/DE-79618 Rheinfelden MATEC systems + technology GmbH Mechanical engineering Mill mat 4 CH-4952 Eriswil/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Category: 102 lathes
New in: 1993
Location: Land-de DE
Seller: Surplex GmbH

Weight approx.: 7500 kg swing diameter: 250 mm Dimensions (l x w x h) approx.: 4300 x 3700 x 3300 mm turning speed range: 0 - 3000 rpm rapid travel - longitudinal/face: 20 m/min feed speeds: 0,1 - 20000 mm/min total power requirement: 40 kW control: Siemens Sinumerik 840 C turning height: 350 mm Description: - Turning diameter: 200 mm - Spindle diameter in front bearing: 100 mm - Stroke vertical support: 300 mm - Main spindle speed: 50 - 6500 rpm - Sauter turret with 12 tool stations VDI 40 - Driven tools on stations 1/4/7/10 - Workpiece conveyor with 10 support discs - C-axis - no clamping devices - no tool holders - no coolant - used for dry machining - hard turning

Category: 206 presses
New in: 1987
Price 2.700 €
Location: Country-DE Germany, 82281 Egenhofen
Seller: Graf Maschinenhandel GmbH

Type: Export used machine max. working area: round about 2.500 x 1.300 x 600 mm year of construction: 1987 Location: Warehouse / 82281 Herrnzell

Category: 206 presses
New in: used
Location: Land-de DE
Seller: Surplex GmbH

Weight approx.: 450 kg Dimensions (l x w x h) approx.: 2700 x 700 x 2400 mm setting measure approx (l x w x h): 2650 x 700 x 2600 mm Description: - 5 vertical Hyrdaulik cylinders - Height adjustable heating rail with counterweights

Category: 206 presses
New in: used
Price 990 €
Location: Country-DE Germany, 95179 Geroldsgrün
Seller: voelkel-hightech

Heating rail, pneumatic pressure cylinders 6 piece, 3000 mm long, mobile, top-Zustand

Category: 206 presses
New in: used
Location: Land-de DE
Seller: Surplex GmbH

Weight approx.: 800 kg Dimensions (l x w x h) approx.: 5350 x 1600 x 2250 mm Description: Press area 1850 x 5200 mm, 10 adjustable press arms, cylinder stroke 40 mm, diameter 30 mm

Category: 206 presses
New in: 1992
Price 690 €
Location: Country-de Germany, 79618 Rheinfelden
Seller: MATEC system+technik GmbH

Edge presses Hess Heating rail, mobile Verleimen length 3 m Material thickness 60 mm Pneum. cylinders. L x W x H: 320 x 60 x 100 cm weight approx. 280 kg Built in 1992 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4952 Eriswil/DE-79618 Rheinfelden MATEC system + technology GmbH Mechanical engineering Mill mat 4 CH-4952 Eriswil/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

New in: used
Location: Country-at Austria, 2355 Wiener Neudorf
Seller: HESSE+CO GesmbH

pressure:60 t stroke:250 mm table surface area: mm total power requirement:4 kW weight of the machine ca.:800 kg dimensions of the machine ca.:1.710 x 700 x 2.100 m technical data bending force: 60 to motor power: 4 kW stroke: 250 mm distance between columns: 1.040 mm piston Ø: 180 x 120 mm advance speed: 8 mm/s working speed: 4 mm/s return speed: 10 mm/s length: 1.710 mm width: 700 mm heigth: 2.100 mm weight: 800 kg equipment steel welded frame stop at any position pressure monometer safety valve against overloading 2 V-blocks table height adjustable table up-down movement attachment control by operating lever according to CE regulations user manual in GERMAN and ENGLISH

Category: 206 presses
New in: 1975
Price 1.280 €
Location: Country-de Germany, 79618 Rheinfelden
Seller: MATEC system+technik GmbH

Frame press Hess pneumatic Format L x B: 3000 x 2000 mm L x W x H: 360 x 240 x 80 cm Built in 1975 Weight approx. 500 kg The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4952 Eriswil/DE-79618 Rheinfelden MATEC systems + technology GmbH Mechanical engineering Mill mat 4 CH-4952 Eriswil/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

New in: 2004
Location: Country-at Austria, 2355 Wiener Neudorf
Seller: HESSE+CO GesmbH

chamfer lenght:6000 mm plate thickness:0,8 mm distance between columns: mm total power requirement:2,2 kW weight of the machine ca.:2200 kg dimensions of the machine ca.:7000 x 1300 x 1400 mm technical data bending length: 6.000 mm bending power: 0,8 mm bending power copper and aluminum: 1,0 mm motor power: 2,2 kW number of arms: 5 length: 7.000 mm width: 1.300 mm height: 1.400 mm weight: 2.200 kg equipment hydraulic cutting unit 0,8 mm control with 8 programs no users manual Does not comply with the present industrial safety regulation

Category: 206 presses
New in: 1987
Price 3.100 €
Location: Country-de Germany, 79618 Rheinfelden
Seller: MATEC system+technik GmbH

Frame press Hess economic hydraulic 3600 x 2250 mm L x W x H: 400 x 100 x 270 cm Weight approx. 1100 kg year 1987 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4952 Eriswil/DE-79618 Rheinfelden MATEC system + technology GmbH Mechanical engineering Mill mat 4 CH-4952 Eriswil/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

New in: used
Location: Country-at Austria, 2355 Wiener Neudorf
Seller: HESSE+CO GesmbH

sheet width:3100 mm plate thickness:8,0 mm pre-bending:6,0 mm total power requirement:11,0 kW weight of the machine ca.:6,7 t dimensions of the machine ca.:4,88x1,16x1,18 m bending capacity: 8,0 mm » at 3x upper tool diam. prebending: 6,0 mm » at 1,5x upper tool diam. upper roll diameter: 230 mm lower roll diameter: 210 mm side roll diameter: 190 mm max. pass through: 30 mm working height: 825 mm ? fully hydraulic drive of upper and lower roll by planetary gear box ? digital read-out of side rolls position ? hydraulic drop-end bearing ? conical bending device ? hardened rolls ? hydr. side rolls positioning synchronized by PLC ? hydr. lower roll feed by torsion shaft ? pressure adjus ...

Category: 209 other wood working machines
New in: 1997
Price 9.500 €
Location: Country-DE Germany, 37120 Bovenden
Seller: MELCHIOR MASCHINEN E.K.

Single wood-grinding machine HESS junior 2 sanding shoe unit (top / bottom) using oscillating abrasive belt grinding width 190 mm Grinding height of Max 4-150 mm Working height 850 mm Digital display for motor grinding thickness setting Belt motor 2 x 5,5 KW Sanding belt dimensions 200 mm wide x 1850 mm long Belt speed 25 m/s. Pneum. Belt blower Pneum. Belt tension Minimum workpiece length of min. 280 mm Speed 5-25 m / min. Feed motor 0.75 KW Brushing and finish unit top / bottom 2 x 0,75 KW Workpiece bubble off Setup with autom. Switch-off Dust spout from above 2 x D = 180 mm Roller infeed 1000 mm, roll outlet 1000 mm Dimensions length 2050 (3800) mm, width 1000 mm, he ...

New in: used
Location: Country-at Austria, 2355 Wiener Neudorf
Seller: HESSE+CO GesmbH

sheet width:1250 mm plate length:2500 mm plate thickness:6 mm total power requirement:15 kW weight of the machine ca.:12960 kg dimensions of the machine ca.:7.360 x 6.800 x 2.310 mm punching force: 20 to working area: 2.500+R x 1.250 mm X-axis movement: 2.500+R mm (repositioning) Y-axis movement: 1.250 mm speed of Y-axis: 80 m/min speed of X-axis: 116 m/min speed combined X+Y: 140 m/min max. strokes (in 1 mm steps, 1 mm thickness): 1.200 1/min max. strokes (in 25 mm steps, 1 mm thickness): 400 1/min max. marking speed: 1.800 1/min. main cylinder stroke: 40 mm max. punching stroke: 25 mm max. cutting thickness with fix tool station steel: 6 mm max. cutting thickness with fix tool station stai ...

Category: 204 grinding machines
New in: 1984
Location: Country-it Italy, 39010 GARGAZON
Seller: MISCHI KURT

- working width 190 mm - 1 upper 1 bottom sanding group - 1 Brushing group - Speed of conveyor belt m/min 5-25 m/min - Height work piece (min max.) 15mm a 50 mm - Min working length 370 mm - Width and Length of belt 200 x 1850 mm - Sanding motors 2 x 5,5 kw 7,5 hp - Motor power of conveyor belt 0,37 kw 0,5 hp - Exhaust plant power 2000-2500 m3/h; good

New in: used
Location: Country-at Austria, 2355 Wiener Neudorf
Seller: HESSE+CO GesmbH

angle steel/side length: mm double T-iron on the x-axis: mm U-iron on the x-axis: mm total power requirement:7,5 kW weight of the machine ca.:2350 kg dimensions of the machine ca.:1.580 x 1.200 x 1.410 mm technical data Performances: flat steel on edge: 80 x 20 mm tube: 100 x 2,5 mm round steel: 50 mm shaft diameter: 80 mm roll diameter: 247 mm driven rolls: 3 motor power: 7,5 kW speed: 6,5 m/min length: 1.580 mm width: 1.200 mm heigth: 1.410 mm weight: 2.350 kg equipment 3 driven rolls (hydromotor and planetary gear) strong welded steel construction lower rolls hydr. adjustable digital read-out for lower rolls positions plane rolls lateral rolls (forward-backward hydraulic, rest manual) hor ...

Category: 1300 other machines and plants
New in: 2007
Location: Land-de DE
Seller: Innovac GmbH

Material testing with QUASAR PCRT, output: 180-600pieces/h, compressed air supply: 6-8bar, control voltage: 24V, length: 1250mm, width: 865mm, height: 750mm, weight: 1t.

New in: used
Location: Country-at Austria, 2355 Wiener Neudorf
Seller: HESSE+CO GesmbH

saw blade diameter:450 mm cutting diameter: mm stroke: mm total power requirement:2 x 2,2 kW + 0,55 kW weight of the machine ca.:680 kg dimensions of the machine ca.:5.863 x 1.662 x 1.158 mm automatic angle preselection: 45° - 90° accuracy: +/- 0,1 mm capacity: round 90°: 150 mm square 90°: 135 mm rectangle 90°: 205 x 90 mm round 45°: 130 mm square 45°: 120 mm rectangle 45°: 145 x 90 mm blade speed: 2.900 r/min blade dimension: 450 x 32 x 4 (Z120) max. cutt off length: 3.500 mm motor: 2 x 2,2 kW + 0,55 kW width: 5.863 mm depth: 1.662 mm height: 1.158 mm weight: 680 kg double mitre circular saw 2 hand operation automatic angle preselection 45° - 90° between adjustments manual LCD t ...

Category: 401 filling machines
New in: 1985
Price 150.000 €
Location: Country-DE Germany, 73560 Böbingen
Seller: APA-Tec GmbH

Mandrel wheel wrapping machine for carton packaging with inner bag. Package manufacturing part with turned 8 teiligem mandrel wheel. Pack material supply for the inner pouch for coated paper (40 g / m ²) with a roll width of 295 mm. glue station for the order of partial cold glue in the pass for soil and longitudinal seam bonding. Box feeder for printed flat carton blanks (300 g / m ²) for the exterior envelope. Integrated glue station for the application of hot glue traces for soil and longitudinal seam bonding. Complete with hot glue device. Filling part clocked bucket chain with 27 stations. Equipped with 2 mechanical dosing machines, motor-driven RÃ&frac ...

New in: used
Location: Country-at Austria, 2355 Wiener Neudorf
Seller: HESSE+CO GesmbH

pressure:175 t chamfer lenght:3050 mm distance between columns: mm total power requirement:18,5 kW weight of the machine ca.:11500 kg dimensions of the machine ca.:4250 x 1700 x 2750 mm bending length: 3.050 mm bending force: 175 to axis: Y1 / Y2 / X and R axes upper tool: 75° goose neck, sectioned lower tool: 4-V die 16,22,35 und 50 mm anti deflection: yes, CNC contolled back gauge: CNC conrolled motor power: 18,5 kW length: 4.250 mm width: 1.700 mm height: 2.750 mm weight: 11.500 kg 4 axes (Y1, Y2, X, and R axis) CNC DT-10 - intuitive touch-screen control (simple drawing of the bending outline with your finger) - direct programming of the bending angle - user friendly programming in dial ...

Category: 505 other machinery for waste disposal and recycling
New in: 2002
Location: Country-de Germany, 97799 Oberleichtersbach
Seller: ENDERS Produktion GmbH

6 spiral augers, total volume: approx. 55 cbm, capacity: approx. 150 cbm/h, drive 3 x 11 kW

New in: used
Location: Country-at Austria, 2355 Wiener Neudorf
Seller: HESSE+CO GesmbH

pressure:30 t stroke:200 mm table surface area: mm total power requirement:3 kW weight of the machine ca.:400 kg dimensions of the machine ca.:1.500 x 700 x 1.800 mm technical data bending force: 30 to motor power: 3 kW stroke: 200 mm distance between columns: 775 mm piston Ø: 125 x 80 mm advance speed: 7,5 mm/s working speed: 5 mm/s return speed: 10 mm/s length: 1.500 mm width: 700 mm heigth: 1.800 mm weight: 400 kg equipment steel welded frame stop at any position pressure monometer safety valve against overloading 2 V-blocks table height adjustable table up-down movement attachment control by operating lever according to CE regulations user manual in GERMAN and ENGLISH (sample photo show ...

Category: 102 lathes
New in: 1990
Location: Country-de Germany, 29223 Celle
Seller: D Cunha Industriemaschinen GmbH

Hessap DV-92 Two Spindle Vertical Lathe; Year of manufacture 1990; Siemens CNC control 3T; Swing diameter max. 1000 mm; Turning diameter max. 900 mm; Vertical stroke of ram Z 800 mm; Pendulum machining (1st side turning / 2nd side loading) Spindle drive motor rating 60 KW; Spindle speeds 10 - 1400 rpm; 2x Hydraulc 3-jaw chucks Ã?Æ\'Ã

New in: used
Location: Country-at Austria, 2355 Wiener Neudorf
Seller: HESSE+CO GesmbH

pressure:80 t throat:280 mm stroke:4 - 102 mm total power requirement:7,4 kW weight of the machine ca.:5400 kg dimensions of the machine ca.:2000 x 1100 x 2410 mm technical data pressforce: 80 to table: 900 x 540 mm clutch: disc activation of clutch: pneumatic stroke: 4 - 102 mm number of strokes: 54 1/min motor: 7,5 kW hole in ram: 50 mm throat depth: 280 mm ram surface: 490 x 325 mm hole in table: 180 mm length: 2.000 mm width: 1.100 mm height: 2.410 mm weight: 5.400 kg equipment 8-fold ram guide mechanical working room protection manual stroke adjustment ram adjustment witch ratchet drive over gear combined clutch brake unit with pneumatic control fix table single and continuous stroke fo ...

Category: 206 presses
New in: used
Price 2.000 €
Location: Country-de Germany, 76316 Malsch
Seller: Schreinerei

Cylinder go Hess frame press with pneumatic 3 vertical and 2 horizontal cylinder

New in: used
Location: Country-at Austria, 2355 Wiener Neudorf
Seller: HESSE+CO GesmbH

sheet width:2050 mm plate thickness:3 mm distance between columns: mm total power requirement:3 kW weight of the machine ca.:1300 kg dimensions of the machine ca.:2400 x 1350 x 1200 mm sheet thickness: 3 mm cutting length: 2.050 mm cutting angle: 2,2° strokes: 35 1/min back gauge: manual motor power: 3 kW back gauge range: 550 mm table height: 850 mm length: 2.400 mm width: 1.350 mm heigth: 1.200 mm weight: 1.300 kg man. back gauge up to 550 mm scale automatic sheet hold down 1 squaring arm 2 off sheet supporting arms moveable foot switch user manual in GERMAN and ENGLISH Does not comply with the current industrial safety regulations (AMVO & UVV) We have more than 270 references!

Category: 1001 plants for concrete and precast technology
New in: 1989
Location: Land-de DE
Seller: BeTeMa GmbH

Multi layer machine for pavers, blocks, etc. Manufacturer: Hess Type: Hydromat with with layer device including 6 molds

New in: new
Location: Country-at Austria, 2355 Wiener Neudorf
Seller: HESSE+CO GesmbH

table length:3060 mm table width:1530 mm burner heads:PRECITEC 4 kW total power requirement:53 kWh weight of the machine ca.:12000 kg dimensions of the machine ca.:9440 x 2750 x 2420 mm cutting area: 3.060 x 1.530 mm laser power: 0,4 - 4,0 kW wavelength: 1.070 - 1.080 nm polarization: random max. pulse frequency: 5,0 kHz average power consumption: 53 kWh application range: mild steel: 20 mm stainless steel: 10 mm aluminium: 12 mm copper: 6 mm brass: 10 mm working ange: x-axis: 3.060 mm y-axis: 1.530 mm z-axis: 125 mm max. sheet size: 3.000 x 1.500 mm max. sheet weight: 1.000 kg dynamic and precision: max speed x- and y- axes: 200 m/min max. spped simultaneous: 282 m/min max. acceleration: ...

Category: 102 lathes
New in: 1995
Price 15.000 €
Location: Land-de DE
Seller: Maynards Europe GmbH

Turning-Dia / Dreh-Dia 250 mm Swing-Dia / Umlauf-Dia 250 mm Turning Height / Drehhöhe 350 mm Vertical Stroke / Vertikalhub 300 mm CNC Siemens Sinumerik 840 C (1995) Spindle-Dia / Spindel-Dia 100 mm (DIN 55026 – A6) Spindle-Speed / Spindel- Drehz. 50 – 6.500 1/Min Feed / Vorschub 0,1 - 20000 mm/min Rapid Travel / Eilgang 20 m/min Tool-Turret / Wz-Revolver 12 Pos. (VDI 40) Power required / Leistungsbedarf 40 kW Weight / Gewicht, ca. 8.000 kg Space required / Platzbedarf, ca. L x W/B x H 4.500 x 4.000 x 3.500 mm

New in: new
Location: Country-at Austria, 2355 Wiener Neudorf
Seller: HESSE+CO GesmbH

pressure:200 t chamfer lenght:3050 mm distance between columns:2550 mm total power requirement:15 kW weight of the machine ca.:7,95 t dimensions of the machine ca.:4,5*1,39*2,52 m Technical Data bending length: 3.050 mm bending force: 200 to axis: 3 (Y1, Y2, X) upper tool: yes lower tool: yes anti deflection: manual, central adjustable back gauge: CNC controlled (X-axis) motor power: 15 kW distance between columns: 2.550 mm daylight: 445 mm table width: 104 mm table height: 858 mm throat depth: 250 mm travel of back gauge (X): 620 mm oiltank: 150 lt length: 4.500 mm width: 1.390 mm height: 2.520 mm weight: 7.950 kg Equipment 3 axes (Y1, Y2, and X axis) CNC DT-10 - intuitive touch-screen cont ...

Category: 102 lathes
New in: 2002
Price 25.000 €
Location: Land-de DE
Seller: Maynards Europe GmbH

Turning-Dia / Dreh-Dia 250 mm Swing-Dia / Umlauf-Dia 250 mm Turning Height / Drehhöhe 350 mm Vertical Stroke / Vertikalhub 300 mm CNC Siemens Sinumerik 840 D (2002) Spindle-Dia / Spindel-Dia 100 mm (DIN 55026 – A6) Spindle-Speed / Spindel- Drehz. 50 – 6.500 1/Min Feed / Vorschub 0,1 - 20000 mm/min Rapid Travel / Eilgang 20 m/min Tool-Turret / Wz-Revolver 12 Pos. (VDI 40) Power required / Leistungsbedarf 40 kW Weight / Gewicht, ca. 8.000 kg Space required / Platzbedarf, ca. L x W/B x H 4.500 x 4.000 x 3.500 mm

New in: new
Location: Country-at Austria, 2355 Wiener Neudorf
Seller: HESSE+CO GesmbH

sheet width:1.250 mm mm plate length:2.000 mm + N mm plate thickness:6 mm total power requirement:11 kW weight of the machine ca.:11,6 t dimensions of the machine ca.:3,45 x 5 x 1,93 m - CNC graphic-control SIEMENS 840DSL: The system software has a varied range of functions from the planning stage up to the punch process. All the drafts which are produced with the integrated CAD/CAM application or imported in the format DXF, IGES, DWG will be able to process. functions of the software: - minimizing of tool changes - repositoning of the clamps - optimizing the tool path simulation etc. - programming direct on the machine - PC-software tool managment - turnable multitool with 6  ...

Category: 102 lathes
New in: used
Location: Land-de DE
Seller: Czech Industrie Service

Year built: approx 1973Spitzenhoehe: 190 mmDrehlaenge: 1000 mmDrehzahlbereich: 30-1500 UpMSpindeldurchlass: 38 mmGesamtleistungsbedarf: approx. 2.5 KW / 380 VoltMaschinengewicht: 1,200 kgAusstattung / Accessories: 3 jaw Chuck Forkardt 200 mmMultifix quick change Toolpost mod. ED 2512 incl. 3 TaschenSchnellspannbohrfuttermitlfd. Koernerspitzediv. KleinteileAlle created technical data after best knowledge and existing documents; Expressly reserved by mistake. Each party has the opportunity to test the machine before making a purchase after consultation under power.

Category: 207 gluespreader machines
New in: used
Location: Country-de Germany, 32469 Petershagen
Seller: Bödeker Holzbearbeitungsmaschinen GmbH

Manufacturer: Hess, Type: Mobil Kantenbügelpresse, Min.-max. workpiece height in mm: 60, Pre-warming of massive edges and heating rod: yes, Working length mm: 1.100, Working widht mm: 1.100, Carriage: yes, Tiltable design: yes, Cylinder: 2,

Category: 206 presses
New in: used
Location: Land-pl PL
Seller: Biotechnik Adam Lada

Simon Hessen pellet press V150 132kW

Category: 207 gluespreader machines
New in: 1990
Location: Country-de Germany, 32469 Petershagen
Seller: Bödeker Holzbearbeitungsmaschinen GmbH

Manufacturer: Hess, Type: Kantenbügelpresse, Year: ca.1990, Pre-warming of massive edges and heating rod: 2, Working length mm: 4000, Working widht mm: 60, Carriage: yes, Tiltable design: yes, Pneumatik: yes, Cylinder: 8, Wight approx. kg: 300, Year :ca.1990

Category: 206 presses
New in: 1986
Location: Land-de DE
Seller: V. Grum-Schwensen GmbH

Technical description: -2 pneumatic pressure cylinder in length -2 pneumatic pressure cylinder width -2 pneumatic workpiece holders - feed band width: 680 mm -Feed belt length: approx. 3,400 mm -Clamping surface: 680 x 1,400 mm -Control Panel

Category: 207 gluespreader machines
New in: 1995
Location: Country-de Germany, 32469 Petershagen
Seller: Bödeker Holzbearbeitungsmaschinen GmbH

Manufacturer: Hess, Type: Speedy, Year: 1995, Work piece width min-max mm: Hydraulisch, Min.-max. workpiece length in mm: Hochdruck, Min.-max. workpiece height in mm: 3050, Working widht max mm: ca 2200, Working width min min mm: 100, Hydraulical/pneumatical: 3, Press depth mm: Hydraulisch, Year :1995

Category: 102 lathes
New in: 1994
Price 10.000 €
Location: Land-de DE
Seller: SENER MASCHINEN

CNC vertical lathe with Siemens / Indramat control

Category: 207 gluespreader machines
New in: 1995
Location: Country- ,
Seller:

Manufacturer: Hess , Type: Rahmenpresse, Year: ca.1995, Work piece width min-max mm: ca.1500, Min.-max. workpiece length in mm: 2500, Min.-max. workpiece height in mm: 10-90, Working widht max mm: 2500, Hydraulical/pneumatical: elektrisch, Year :ca.1995

Category: 204 grinding machines
New in: 1990
Location: Country-de Germany, 32469 Petershagen
Seller: Bödeker Holzbearbeitungsmaschinen GmbH

Manufacturer: Hess, Type: Junior, Year: ca.1990, Control: L/L, Software: yes, Barcode: 190, Monting of the machine: 4 - 150, Equipment of machine 2: 2, Double sided sanding line: 5 - 25, Steel roller: yes, Steel roller: yes, Band 1 Schleifbandgeschwindigkeit m/s : 5,5, Belt 2 shoe unit: 5,5, Band 2 Schleifbandgeschwindigkeit m/s : 1, Belt 2 synchronous and reverse run: yes, Band 3 Leistung kW : 280, Band 3 Schleifbandgeschwindigkeit m/s : yes, Belt 3 pressure segment belt: yes, Belt 3 synchronous and reverse run: yes, Year :ca.1990

Category: 207 gluespreader machines
New in: 2000
Location: Country-de Germany, 32469 Petershagen
Seller: Bödeker Holzbearbeitungsmaschinen GmbH

Manufacturer: Hess , Type: Centro, Year: 2000, Hydraulical/pneumatical: yes, High / low pressure: yes, Press length mm: 3050, Press height in mm: 2200, Press depth mm: 100, Cylinder vertical: 2, Cylinder horizontally: 2, Vertikaldruckzylinder: 2, Haltezylinder zum Fixieren der Hölzer: yes, Mitteldruckbalken: no, Querdruckeinrichtung: yes, Funk-Handpanel: Handpanell, Elektronische Einzeldruckregelung (zum Verpressen von Kreuzsprossenfenster): yes, Year :2000

Category: 207 gluespreader machines
New in: used
Location: Country-de Germany, 32469 Petershagen
Seller: Bödeker Holzbearbeitungsmaschinen GmbH

Manufacturer: Hess, Type: Kantenpresse, Working length mm: 2500, Working widht mm: 2000, Carriage: yes, Pneumatik: yes, Cylinder: 80, Wight approx. kg: 300,

Category: 207 gluespreader machines
New in: 1997
Location: Country-de Germany, 32469 Petershagen
Seller: Bödeker Holzbearbeitungsmaschinen GmbH

Manufacturer: Hess, Bauyeshr : 1997, Hydraulical/pneumatical: hydraulisch, Press length mm: 3800, Press hight mm: 2900, Machine rigging: hand, Wight approx. kg: 4000, Year :1997

You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)