We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
used
Grinding diameter maximum: 105 mm Grinding diameter minimum: 2 mm Turning diameter: 0 mm Grinding depth: 1500 mm MACH-id 5409 MAKE HENNINGER KG Germany TYPE ZS 150 YOP 1988 SPECIFICATIONS External workpiece Ø Min. 5 Ø Min. External workpiece Ø Max. 105 Ø Max. Internal workpiece Ø Min. 2 Ø Min.Internal workpiece Ø Max. 90 Ø Max. Max. product length 1500 mm Speeds / ranges 24.000 Rpm Max. grinding angle 45 - 120 ° Max. workload weight 145 Kg DIMENSIONS Length 100 mm Width 700 mm Height 2200 mm
used
workpiece diameter: 110 mm grinding depth: 60 mm clamping length: 2500 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Hole diameter maximum: 0 mm Grinding wheel diameter: 105 mm Workpiece height maximum: 0 mm Make Henninger ZS Type ZS 150 Year 1996 Henninger centre grinding machine Grinding length (mm) Diam 2 - 85 mm Grinding width (mm) L = 1.200 mm Grinding height Speed 24.000 Wheel diameter (mm)Vice = 5 - 105 mm Digital read out system New price Euro 40.000
used
High-speed milling spindle HENNINGER Type 814 / 5131 / 1:5 / 15000 Speed max. 15000 rpm at 70% ED Gear ratio 1:5 Power transmission up to approx. 2.5 kW Stem dimension 110 mm (machine spindle to tension nut Tool holder MK4 with tightening thread M16 Collets type OZ16 6 / 8 / 9 / 10 / 11 / 12 / 12,5 / 13 / 14 mm Net weight 6,5 kg good condition; used
used
not to be found - on shelf I in the Diesel 5 - as of 24.10.2023 Quick-on milling spindle HENNINGER type 801 - N 503 speed max. 6000 rpm at 70% ED gear ratio 1:6 Power transmission up to 2.5 kW Stem dimension 110 mm (machine spindle to clamping nut Tool holder SK 40 - S20x2 Collets 2 / 2.5 / 3 / 3.5 / 4 / 4.5 / 5 / 7 / 8 / 9 / 10 / 11 / 12 / 13 / 14 / 15 / 16 mm in wooden storage box The head is equipped with bronze gears for high torque. Dead weight 5 kg Weight complete 9.4 kg good condition; used
used
turning speeds:10000 U/min output:22 kw weight approx.:20 kg transmission ratio:1: 4,3 high speed spindle with 1 : 4,3 ratio, MK 5 spindle taper and collet chuck for tooling. Misc. parts in wooden case.
used
AT-Motor Lombardini Type=LDW1204 general-overtaken in exchange.Deutz-Type=F4M1008 email= info@miw-zeven.de
10 pieces of engine with gear without generator and starter construction year 1990 - in 1998 Nissan Primera, Almera, Sunny, Micra, Blubird parcel price
used
SEW-motors with gearbox v. 1, 5kW - 15kW.Die engines have been used mint condition and never.Visits by appointment at any time.
used
E engine durchfl. Water cooled Three-phase asynchronous motor Manufacturer: ELIN Model: MKH-435 K04 Z9Z Performance: 315kw Supply: 400 V Revolutions: 1336/min Weight: 1700kg NEW, original box, unused from old stock for further details please refer to the pictures.
used
E engine Three-phase asynchronous motor Manufacturer: VEM Model: K21R 315 MX4 Power: 160kw Supply: 400 V Revolutions: 1480/min Weight: 1000kg NEW, original box, unused from old stock for further details please refer to the pictures.
new
3 Phase brushless servomotor Never used! For all technical data please see pictures
used
Schorch electric motor three-phase motor, electric motor Type: 355S power: 250kw Speed: 1490upm Shaft diameter: 80mm Design B3 Protection type IP44 Weight 1550 kg used, but in very good condition.
used
Perske 10DW 12/10 DA 12/2 Frequency converter Drive motor: Type: DA 12/2 8KW 400V 50 HZ S1 IP 54 Circuit: Triangle 2910 RPM Coil: 7.5 A 380 V excitation voltage excitation 50 HZ excitation frequency donation page: Type: 10DW 12/10 10 kVA power 35 A of output current 300 Hz output frequency output voltage of 165 V speed: 12000 U/1 18,000 U/1 G & 2768-M3520
used
2 pcs motors.: DIN EN 60034-1 Type: K21R 200 L6-4 L TWS 9 / 26.9 kW 400 V 19.5 / 49 amps 985/1470 U / min 200 Kg Year: 04 Wave Pully recording: 55 mm Pully diameter: 255 mm 1 pcs motor: DIN EN 60034-1 Type: K21R 225 S6-4 L TWS HW 12/34 kW 400 V 26/66 amp 982/1475 U / min 270 Kg Year: 04 Wave Pully recording: 60 mm Pully diameter: 255 mm
used
2 pcs motors.: DIN EN 60034-1 Type: K21R 200 L6-4 L TWS 9 / 26.9 kW 400 V 19.5 / 49 amps 985/1470 U / min 200 Kg Year: 04 Wave Pully recording: 55 mm Pully diameter: 255 mm 1 pcs motor: DIN EN 60034-1 Type: K21R 225 S6-4 L TWS HW 12/34 kW 400 V 26/66 amp 982/1475 U / min 270 Kg Year: 04 Wave Pully recording: 60 mm Pully diameter: 255 mm
used
DATA ON THE MACHINE Machine type: Permanent magnet - DC servo motor Manufacturer: INDRAMAT Model: MDC 10.40C / MMA-0 / S06 Condition: ready for use (used) Price 550 â?¬ FP net plus 19% VAT Location Warstein , Germany Reference M-MAH-1119-9 Description We offer you a used DC servo motor from the manufacturer Indramat suitable for e.g. MAHO MH700 X or Y axis Worked flawlessly up to the removal Our offer is aimed at persons who are covered within the meaning of the Trade Code in accordance with Section 14 GewO. The offer is subject to change, intermediate sale reserved. Please provide your full contact details in order to receive an offer with our Terms and Conditions of Payment. Mistakes in the descriptions and offers are reserved!
Qty. 4 Second-hand DC motors Mfc.: ABB Type: DMI400R-DC motor Built: 2009 Power: 1250 kW-815 V-1591 Amps.- 1500 RPM
used
Various electric and geared motors SIEMENS, SEW, BAUER, DEMAG etc. , see pictures, extra list on request.
used
Attention Clearance Sale!!!! We need space, therefore we offer an price of 0,7 € / kg We have many used electric motors from different sice an manufaktors for sale. Condition of the electric motors is seen on the pictures. We sell this units only to dealers for export without warranty.
used
E-motor, 220 kW, 745 RPM
used
Drum motors for conveyor belt drives according to the list in photo The motors are in good condition, ready for operation Flat rate for all engines EUR 3800.00 Changes, errors, intermediate sale reserved ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
used
N:18559 Date:27 12 85 Type:RSD 281 ratio: 4.704:1
used
N: 49351 Type: WAV 550 B building year: 1982 ratio: 5,158:1
used
Angle geared motor Manufacturer: SEW-Eurodrive Model: W30 DRS71M4/TH Quantity: 2 pcs. Built: 2017 Voltage: 230/400 V Current: 2.70/1.55 A Protection: IP55 Efficiency class: IE1 Standard Efficiency Speed: 1360/207 rpm Frequency: 50 Hz Power: 0.55 kW