We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
used
Tilt & Turn Table Fabr. HEINRICHSGLÜCK Type KT 10Capacity: 100 kgFaceplate diameter: 650 mmFaceplate speed: 0.17 - 3.4 rpm.Tilt range: 135 °Dimensions: 720 x 650 x 750 mmWeight approx: 150 kgWith- Hand crankused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Welding turntable make HEINRICHSGLÜCK type H 6Machine -No: 0203994/21796 year of manufacture 1978Technical specifications:Load capacity: 600 kgTurntable diameter: 700 mmExternal dimensions approx.: 1200 x 900 x 1000 mmwith- Infinitely variable speeds- foot switch- tiltableused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Technical data: -Total load powered + revolving unit 60000 kg -Load container device 30000 kg -Workpiece diameter 500-4000 mm -Mot Center distance of the support roles. adjustable - diameter 500 mm -Roll width 470 mm -infinitely variable rotary speed 100-1500 mm / min -Torque 5132 NM -Hand-held remote controls for re - and p-drive run - 400 V -Both units are mounted on Rails and -can be moved manually parallel -Space angetr. Unit approx. B H 2800 x 1200 X 1600 mm -Motoryacht. with ongoing unit approx. B H 2800 x 1200 X 1200 mm -Weight angetr. Unit approx. 4800 kg - approximate weight with running unit 3800 kg
used
Specifications: - Total payload driven + running unit 60000 kg - Payload per container device 30000 kg - Workpiece diameter 500 - 4000 mm - Center distance of the support rollers mot. adjustable - Roll diameter 500 mm - Roll width 470 mm - infinitely adjustable rotation speed 100 - 1500 mm/min - Torque 5132 Nm - Handheld remote control for re- and li.-run - Drive 400 V - Both units are mounted on guide rails and - can be moved manually in parallel - Space requirements Unit approx. W 2800 x H 1200 x D 1600 mm - Platzb. with running unit approx. W 2800 x H 1200 x D 1200 mm - Weight applied. Unit approx. 4800 kg - Weight with running unit approx. 3800 kg
used
Pipe Cutting Machine Fabr. HEINRICHSGLÜCK Type RBSM 1Komm.-Nr. 4026, machine no. 207086, year of construction 1994CUTTING MACHINE:Workpiece diameter: 100 - 600 mmThree-jaw chuck outer / inner clamping: 193 - 321 mmExternal voltage: 8 - 136 mmInternal tension: 74-201 / 188-315 mmBurning amplitude: 0 - 276 mmBurning diameter: 0 - 390 mmRotary drive motor power: 0.21 kWSpeed: 5.7 rpmCutting speed: 50 - 1800 mm / minWorking height: 1140 mmTotal height: 1620 mmWidth (foot): 700 mmControl: SPS S5-9Lifting table:Load capacity: 800 kgTable height: 350 - 840 mmCentering grooves Drm.:200 - 900 mm (every 100 mm)Table size: 860 x 860 mmSwinging cycle (manual): 90 °Lifting motor: 1.1 kWLifting time approx. 47 sec.End limitation: 2 limit switchesDrive: manualWheel diameter: 80 mmGauge: 580 mmRated voltage: 380VRated operating current: 2 ACONSTRUCTION:2 roller blocks, Rollendrm.:130 mmDistance betwee ...
used
Welding turning device make HEINRICHSGLÜCK type RA 20Item No. 2171, make -No: D206435, built in 1989Technical specifications:Load capacity: 10 t = 20 tconsisting of- 1 powered rotating device Rollendrm. approx. 200 mm- 1 revolving device Rollendrm. approx. 400 mm smallest distance between the rollers approx. 200 mm largest distance between the rollers approx. 1400 mmused, but in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
offer 15107 Specifications: - Total load capacity driven + rotating unit 60000 kg - Payload per container device 30000 kg - Workpiece diameter 500 - 4000 mm - Axle distance of the support rollers adjustable - Steel support rollers - Roll diameter 650 mm - Roll width 200 mm - infinitely adjustable rotational speed - Handheld remote control for re- and li. run - Drive 400 V - Space requirements Unit approx. W 5100 x H 1000 x D 1500 mm - Platzb. with running unit approx. W 3500 x H 1000 x D 1000 mm - Weight applied Unit approx. 4500 kg - Weight with running unit approx. 3300 kg
used
Offer 23205 Specifications: - Total payload driven + moving unit 20000 kg - Load capacity per container 10000 kg - Workpiece diameter approx. 500 - 3500 mm - Wheelbase of the articulated support arms man. adjustable - Roller diameter 4 x per support arm 250 mm - Roll width 4 x per support arm 80 mm - infinitely variable rotation speed approx. 100 - 1500 mm/min - Hand-held remote control for re- and Li. run - Drive 400 V - Space requirements Unit approx. W 1700 x H 1100 x D 1000 mm - Platzb. with running unit approx. W 1700 x H 1100 x D 700 mm - Weight tr. Unit approx. 1400 kg - Weight with running unit approx. 1000 kg
used
Offer 23216 Specifications: - Total payload driven + moving unit 20000 kg - Load capacity per container 10000 kg - Workpiece diameter approx. 500 - 3500 mm - Wheelbase of the articulated support arms man. adjustable - Roller diameter 4 x per support arm 250 mm - Roll width 4 x per support arm 80 mm - infinitely variable rotation speed approx. 100 - 1500 mm/min - Hand-held remote control for re- and Li. run - Drive 400 V - Space requirements Unit approx. W 1700 x H 1100 x D 1000 mm - Platzb. with running unit approx. W 1700 x H 1100 x D 700 mm - Weight tr. Unit approx. 1400 kg - Weight with running unit approx. 1000 kg
used
table length: 1050 mm table width: 1050 mm table load: 3,6 t table - tiltable: 0 - 135 ° table rotation: 360 ° table rotation speed: variabel einstellbar U/min total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: 2,35 x 1,70 x 2,00 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
UWM WELDING ROTARY TABLE TYPE UWM 3 -Capaciteit of horizon eel 300 kg -Capaciteit vertikaal 150 kg -Panel of afmeting 450 mm -Tpm Omwentelingen 0.2/2 -90 degrees kantelbaar -Voetpedaal -Toerental digital uitlezing -Drieklauw met -Noodstop -Documentatie -230V DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (3 km from the German border)
new
TTMC WELDING TABLE TYPE WP500 - Capaciteit horizontaal 500 kg - Capaciteit verticaal 250 kg - panel afmeting 550 mm - Electrically kantelbaar - Voetpedaal - Documentatie - 230V DUTCHMACH Metalworking machines ENSCHEDE - NETHERLANDS (3 km from the German border)
new
maximum load capacity with horizontal planing disc 60 tons, maximum load with vertical planboard 90° at a load center of one meter 30 tons – with a load center of two meters 19 tons.
used
Capacity: 6000 kg Plate dimensions: 1500 x 1500 mm Tilt ingesmitating range: horizontal to - 145° Rotation speed: 0 - approx. 1 rpm electr. Connection: 400 V, approx. 5 kW Space requirement: 2800 x 2350 x 3250 mm Weight: 5000 kg
used
specifications: - Load capacity Positioning table approx. 750 kg - Sheet plate diameter 500 mm - max workpiece diameter 1600 mm - Height turntable at horizontal position approx. 750 mm - Turntable with right, + left-hand run - Rotary axis turntable endless 360° - Turning time per revolution 12.5 sec. - Pan left + right - Pivot axis rotation angle 180° - Swivel time for 180° swivel angle 10 sec. - 2 x double foot button for turntable + swivel arm - hydr. Clamping bolts for clamping the workpiece in the centre of the turntable - Clamping stroke / clamping distance of the clamping bolt 32 mm - Clamping force pressing / pulling 80 / 48.9 kN - Clamping cylinder internal thread M 27 x 40 - Positioning control SIEMENS - Operation manually or via control - Space requirement approx. W 1500 x D 2800 x H 1100 mm - Weight approx. 2500 kg
used
specifications: - Load capacity Positioning table approx. 750 kg - Sheet plate diameter 500 mm - max workpiece diameter 1600 mm - Height turntable at horizontal position approx. 750 mm - Turntable with right, + left-hand run - Rotary axis turntable endless 360° - Turning time per revolution 12.5 sec. - Pan left + right - Pivot axis rotation angle 180° - Swivel time for 180° swivel angle 10 sec. - 2 x double foot button for turntable + swivel arm - hydr. Clamping bolts for clamping the workpiece in the centre of the turntable - Clamping stroke / clamping distance of the clamping bolt 32 mm - Clamping force pressing / pulling 80 / 48.9 kN - Clamping cylinder internal thread M 27 x 40 - Positioning control SIEMENS - Operation manually or via control - Space requirement approx. W 1500 x D 2800 x H 1100 mm - Weight approx. 2500 kg - sepa ...
new
Machine type welding rotary table Brand MERKLE Type D 150 touch Supply voltage 1 x 230 V Speed range 0.05 – 10 rpm, infinitely variable Speed control 1 : 200 Torque 15 – 50 Nm Face plate diameter 400 mm Face plates - inner passage 60 mm Tilt angle of the face plate 135° Vertical load capacity 150 kg/1.5 kN Table height 750 mm Tilting movement manual, clampable and snap-in Tipping torque 130 Nm Pantograph 400 A at 80 % ED Connection for - foot switch single or double - Handheld remote control - Foot remote control Age 6 months Condition as good as new Weight 65 kg Warranty 24 months from date of delivery List factory price ex stock 3.550,00 € + VAT incl. surcharges Price kpl. ex warehouse Munich 2.890,00 € + VAT Foot switch simple with 3 mtr. cable 225,00 € + VAT 019.0.2900 Foot switch double with 3 mtr. ...
used
Key data: 1500 mm, 3500 kg
Stock number: 3871 WELDING TURNTABLE Manufacturer: ESAB PEMA, Type: 3500 F Machine NO.: A7001, Year of manufacture: 1987 Specifications: Table size 1500 mm Ø Large workpiece weight 3500 kg Gr. rotational torque 3100 NM Infinitely variable table rotations. 0.01 - 0.8 pr/min Hydraulic drive and tip Length: 2000 mm, Height: 1100, Width: 1500 mm, Weight: 1200 kg
used
Offer 23348 Specifications: - max. load capacity 1500 Kg - Face plate diameter 850 mm - Distance from floor to centre axis of rotation 800 mm - Rotary movement electr. infinitely variable 0.08 - 1.6 rpm - Right - + Left - Run - Welding current transmission approx. 700 A - Drive 400 V / 2.2 kW - Space requirements Unit approx. W 850 x H 1450 x D 1000 mm - Space requirement: Moving unit W 850 x H 1450 x D 1000 mm - Weight of driven unit approx. 550 kg - Weight of moving unit approx. 400 kg
used
Rotary table E20 Table working surface 2000x2000mm Table height 910 mm The biggest load of the workpiece table 200000N Movement for sleigh bed 1200 mm Longitudinal feed 2,8-8-22.4 mm min-1 Circular shift on average of 2000 mm 5.8-16.4-48.1 mm min-1 Rapid longitudinal 1245 mm min-1 Rapid circular diameter of 2000 mm to 2600 mm min-1 4kW electric engine for the displacements Floor surface 3000x2765mm Table weight 9350 kg
used
Round-clock table
new
Rotary table with C-axis and Y-axis Face disc diameter Ø4000mm Y-axis travel: 2000mm Load capacity: max. 50t speed 70 rpm Master-slave tensioning on C-axis and on Y-axis 2 Siemens motors each 40kW (on C-axis) 2 Siemens motors on Y-axis Without machine control
new
Rotary table with C-axis Face disc diameter Ø4000mm Load capacity: max. 50t speed 70 rpm Master-slave clamping on C-axis 2 Siemens motors each 40kW (on C-axis) Without machine control
used
1 boring mill turntable Make: Skoda Model: S 60 Year of construction: 1987 Table size: 4000 x 3600 mm Table load: 60 tons. Rotatable. 360 degrees Longitudinal travel: 1100 mm Weight: 38 to.
used
E-welder ESAB type LTG 250 Rod electrode welder Masch. No. 736-820-387 Year of construction 1997 Power 250 Amp. = 35 % ED 190 Amp. = 60 % ED 150 Amp. = 100 % ED Power adjustment: infinitely variable - electrode holder with 6 meters connection cable - DC fan - air cooling - possibly also TIG welding possible, without hose package Mains connection 380 Volt, 50 Hz, 32 Amp. Plug Space requirement L x W x H 1200 x 750 x 1050 mm Weight 180 kg good condition Device was originally also designed for TIG welding. The hose package for TIG welding is not available and the function has not been tested. The water cooling was for the hose package for TIG welding. The device is therefore sold only as an electrode welding machine.; used