used HEBROCK Radius cutters

Type AKV 88 F Without glue tank Max. edge thickness 3 mm Max workpiece height 50 mm Feed speed : 0-7 m/min (0,25kW) Power consumption 3,2 kW Work table height 890 mm Made in Germany 1996 y. Transport dimensions 1360x680x1220 mm Weight 150 kg

Hebrock Edge gluing machine Edge glue Edge milling machine heating Capping

Brand: Hebrock Model: AKV83 Year of construction: 1992 Specifications: Edge thickness 0,4 - 5,0mm Roll ø750 mm Plate thickness max. 10-60 mm Workpiece length: min. 170 mm Connection: 230V, 40Hz Relay Control 1.Hot air (Phön) 3 KW, heat time: 1 min. 1. Caper knife - front & rear same product capping 6. Flat milling top & bottom Feed 4 m/min. Air pressure 7 - 8 bar Machine dimensions: LxHxW 1.750 * 800 * 1.250 mm (incl. plate) Machine weight: 95 KG

Manufacturer: Hebrock, Type: AKV 2001 DK, Year: 1997, Min-max edge material mm: 0,5-3,0, Work piece width min-max mm: 60, Min.-max. workpiece length in mm: 150, Min.-max. workpiece height in mm: 10-45, Min-max feed m/min: 8, Coil magazine: yes, Strip magazin: no, Mitre stations: yes, Pre-milling: Radius, Corner tracing type: yes, 1 motor: yes, Radius scraper: yes, Bonding part EVA: yes, FREE TEXT: Zustand sehr gut, Year :1997

Manufacturer: Hebrock, Type: AKV 88 F, Year: 1997, Control: hand, Glue application: no, Edgeband thickness max mm: 3,0, Edgeband height max mm: 50, Edgeband thickness max mm: 3,0, Glue system granulate/cartridge: Wärmedusche, Feeding speed min-max m/min: 0-7, Mitre stations: yes, FREE TEXT: Elektronische Eintellung der Kantenlänge, Year :1997

Manufacturer: Hebrock, Type: HFF 08, Year: 1993, Min.-max. workpiece height in mm: 15 - 50, Edgeband thickness max mm: 3, Machine lenght mm: 800 x 1400 x 1400, Wight approx. kg: 350, Year :1993

Manufacturer: Hebrock, Type: TF 03, Year: 1998, Edgeband thickness max mm: 3, Edgeband height max mm: 50, Kopierfunktion single sided: yes, Tracing by roller: yes, Arbeitstakt automatisch: yes, Engine milling kW: 0.5, Machine lenght mm: 1000, Compressed air bar: 6, Wight approx. kg: 200, mit Schwabbelstation, Year :1998

Equipment: -Chassis - Quick-heating glue container - Support plate for rolls - Roll capping - Cross-cut saw - Flush milling Radius/Straight/Chamfer - Suction nozzle Ø 100 mm Specifications: Power ratings: 400 V, 50 Hz, 13.3 A, 7 kW max. edge thickness 5 mm max. workpiece height 40 mm min. workpiece length 300 mm Feed speed 11 m/min Ready for use in approx. 4.5 min Work table height 900 mm Dimensions: 3,300 x 1,400 x 1,300 mm Weight approx. 550 kg All information is subject to change of the actual equipment

Sale of a gebr. edge banding from the manufacturer Hebrock. Specifications: Year of construction:1992 Edge thickness:0.4-8.0 mm Min. workpiece length:300 mm Min. workpiece width:70 mm Extraction connection Ø:140 mm Weight (kg):800 Dimensions (L x W x H mm):4100 x 1400 x 1300 mm Workpiece height:8-50 mm Chain feed:11 m/min Cross-cut saw unit:Yes Flush & Radius Milling Unit:Yes Hot melt glue container Support plates Roller capping pneumatically up to 3 mm edge thickness Flush milling unit

Hebrock AKV3003DK-F edge banding machine with joints and two scraper blades. Edge thickness roll approx. 0.4 - 2mm Banding up to 8mm Workpiece height approx. 8 - 45mm Feed rate approx. 10m/min Noise protection hood Extendable workpiece support Suction connection 80 +140mm Aggregates: Manual overpressure adjustment with SIKO counter Infeed ruler manual adjustment with SIKO counter Edge thickness manual adjustment with SIKO counter Grooving mills with slide mills Gluing part with automatic edge retraction for rolls up to 3mm, switchable for synchronization and counter-rotation Pressure zone with 4 rollers Cross-cut saw Integrated collection container for edge pieces Combination milling unit, R2 with pneumatic adjustment between thin and thick edge Radius scraper R2, pneumatically retractable Glue joint scraper blade can be pneumatically inserted ...

max. edge thickness: approx. 3 mm max. workpiece height: approx. 50 mm min. Internal radius of panel: approx. 40 mm 2 motors each 0,37 kW Combined tooling chamfer and radius Milling speed : 12000 rpm Work table height: 865 mm Radius 3 mm tooling

edge thickness: 0,5 - 3 mm, workpiece thickness: 10 - 45 mm, gluing unit: ja / yes, snipping unit: ja / yes, fine trimming unit: ja / yes, Approx. Onsite Dimension. (l x w x h): 3,500 x 1,500 x 1,800 mm, weight approx.: 700 kg

Key data: 1 mm

Equipment and technical data: Edge banding machine for pre-coated edge material High-performance heat gun Roll capping electromagnetic Edge milling machine Sytem Hebrock End capping: Cross-cut module for flush cutting the front Edge protrusion Feed: 3-roller system Boom on both sides Add-on trolley, mobile max. edge thickness approx. 1 mm max. workpiece height approx. 50 mm min. workpiece length approx. 170 mm min. workpiece width approx. 50 mm Feed rate approx. 4 m/min. Ready for use: approx. 1 minute Dimensions 1730 x 690 x1240 mm Weight approx. 115 kg Sale takes place in the ACTUAL state Technical information, description of condition, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale In the case of used machines, any warranty is excluded, it is valid to buy as well  ...

Panel thickness (min/max) 5/50 mm Cutterhead rotation speed 30000 rpm Motor power 0,8 kW Table dimensions 320x440mm Milling axis Ø 6 mm Sufficient and constant compressed air Ø 6 mm Power 220 V/50Hz Transport dimensions 720x500x470 mm Weight 25 kg Price 299 Eur (EXW Jonava, Lithuania

Seydelmann K 60 Ultra, 60 liters bowl cutter, operation via knee lever switches, separate digital display, noise protection cover, central lubrication point for knife-shaft, 2 knives speeds, 2 bowl speeds, 2 mixing speeds forward, knife head with 6 knives. The machine is immediately available and can be tested in Koblenz, Germany.

Karl Schnell emulsifier Power: 9 kW

K+G Weather SM 120 T2M-R, 120 litre cutter, surface, bowl lid with storage wall and bowl stainless steel, noise protection cover, knife shaft brake, main switch, membrane keypad, knife shaft speed 2-tourig, 2 bowl speeds, mixing gear forward and backward, temperature-end shutdown, digital display knife shaft temperature bowl, knife head with 6 knives. The machine is currently undergoing refurbishment and will be available shortly.

Treif Portion cutter Model: 1943 1998. Stainless, infeed chamber 600mm length x 180mm width x 140mm depth, up to 300 cuts a minute, it is possible to cut large bone-in as well as boneless products, such as bacon, spare ribs, chops and "T-bone" steaks, or dairy products, such as cheese, either fresh, chilled or deep-frozen to - 4°C.

K+G Wetter SM 65 STL bowl cutter, 65 liters bowl chopper, bowl and bowl-cover stainless steel, noise reduction cover, knife shaft brake electrically operated, main switch as well as electric control cabinet integrated, membrane keypad, variable knife Speed, 2 bowl speeds (9/18 UpM), mixing speeds forwards and reverse, temperature switch off function, knife head with 6 knives. The machine is immediately available and can be tested like in Koblenz, Germany.

Kilia Supreme Cut 200 ltr., 200 liters bowl cutter, bowl and bowl-cover stainless steel, year of manufacture 2011, hydraulic noise reduction cover, knife shaft brake electrically operated, separate stainless steel electric control cabinet, membrane keyboard, variable bowl speed, variable knife speed, variable mixing speed forwards and reverse, cleaning system, knife head with 6 knifes, hydraulic loading device for 200 liter bins, hydraulic unloader. You are very welcome to inspect and test the machine.

Seydelmann K 60 Ultra, 60 liters bowl cutter, operation via knee lever switches, separate digital display, noise protection cover, central lubrication point for knife-shaft, 2 knives speeds, 2 bowl speeds, 2 mixing speeds forward, knife head with 6 knives. The machine is immediately available and can be tested in Koblenz, Germany.

MADO MSM 764 SUPRA 50 M, 50 Liters bowl cutter, 2 knife speeds, mixing speed forward and reverse, 2 bowl speeds. You are very welcome to test the machine in our facility in Koblenz, Germany.

K+G Wetter Cutmix 70 STL bowl cutter, 70 liters bowl chopper, all stainless steel, membrane keyboard, variable knife speed up to 5.000 rounds per minute, mixing speeds forwards and reverse, knife shaft brake electrically operated ,knife head with 6 knives, bowl with highest filling level, noise reduction cover. You are very welcome to test the machine in Koblenz, Germany.

Laska KU 65 cutter, bowl capacity 65 liters, microprocessor control, membrane keyboard, stepless speed control, 4 freely programmable fixed speeds, mixing gear forward and backward continuously, 6 knife head, electric knife shaft brake, noise protection cover. The cutter can be tested in 56070 Koblenz.

Kramer + Grebe SM 45 STL, 45 liters bowl cutter, all stainless steel, noise reduction cover, knife shaft brake electrically operated, main switch as well as electric control cabinet integrated, 2 knife speeds, mixing speed forwards, 2 bowl speeds, standard knife head with 6 knives. The machine is immediately available and can be tested in Koblenz, Germany.