We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
used
Manufacturer: Hebrock, Type: HFF 08, Year: 1993, Min.-max. workpiece height in mm: 15 - 50, Edgeband thickness max mm: 3, Machine lenght mm: 800 x 1400 x 1400, Wight approx. kg: 350, Year :1993
used
Hebrock Edge gluing machine Edge glue Edge milling machine heating Capping
used
Brand: Hebrock Model: AKV83 Year of construction: 1992 Specifications: Edge thickness 0,4 - 5,0mm Roll ø750 mm Plate thickness max. 10-60 mm Workpiece length: min. 170 mm Connection: 230V, 40Hz Relay Control 1.Hot air (Phön) 3 KW, heat time: 1 min. 1. Caper knife - front & rear same product capping 6. Flat milling top & bottom Feed 4 m/min. Air pressure 7 - 8 bar Machine dimensions: LxHxW 1.750 * 800 * 1.250 mm (incl. plate) Machine weight: 95 KG
used
Equipment: -Chassis - Quick-heating glue container - Support plate for rolls - Roll capping - Cross-cut saw - Flush milling Radius/Straight/Chamfer - Suction nozzle Ø 100 mm Specifications: Power ratings: 400 V, 50 Hz, 13.3 A, 7 kW max. edge thickness 5 mm max. workpiece height 40 mm min. workpiece length 300 mm Feed speed 11 m/min Ready for use in approx. 4.5 min Work table height 900 mm Dimensions: 3,300 x 1,400 x 1,300 mm Weight approx. 550 kg All information is subject to change of the actual equipment
used
Sale of a gebr. edge banding from the manufacturer Hebrock. Specifications: Year of construction:1992 Edge thickness:0.4-8.0 mm Min. workpiece length:300 mm Min. workpiece width:70 mm Extraction connection Ø:140 mm Weight (kg):800 Dimensions (L x W x H mm):4100 x 1400 x 1300 mm Workpiece height:8-50 mm Chain feed:11 m/min Cross-cut saw unit:Yes Flush & Radius Milling Unit:Yes Hot melt glue container Support plates Roller capping pneumatically up to 3 mm edge thickness Flush milling unit
used
Hebrock AKV3003DK-F edge banding machine with joints and two scraper blades. Edge thickness roll approx. 0.4 - 2mm Banding up to 8mm Workpiece height approx. 8 - 45mm Feed rate approx. 10m/min Noise protection hood Extendable workpiece support Suction connection 80 +140mm Aggregates: Manual overpressure adjustment with SIKO counter Infeed ruler manual adjustment with SIKO counter Edge thickness manual adjustment with SIKO counter Grooving mills with slide mills Gluing part with automatic edge retraction for rolls up to 3mm, switchable for synchronization and counter-rotation Pressure zone with 4 rollers Cross-cut saw Integrated collection container for edge pieces Combination milling unit, R2 with pneumatic adjustment between thin and thick edge Radius scraper R2, pneumatically retractable Glue joint scraper blade can be pneumatically inserted ...
used
Key data: 1 mm
Equipment and technical data: Edge banding machine for pre-coated edge material High-performance heat gun Roll capping electromagnetic Edge milling machine Sytem Hebrock End capping: Cross-cut module for flush cutting the front Edge protrusion Feed: 3-roller system Boom on both sides Add-on trolley, mobile max. edge thickness approx. 1 mm max. workpiece height approx. 50 mm min. workpiece length approx. 170 mm min. workpiece width approx. 50 mm Feed rate approx. 4 m/min. Ready for use: approx. 1 minute Dimensions 1730 x 690 x1240 mm Weight approx. 115 kg Sale takes place in the ACTUAL state Technical information, description of condition, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale In the case of used machines, any warranty is excluded, it is valid to buy as well ...
used
Hebrock Euro 2000 Edges up to 5mm striped fabric Granule Hot Melt Glue Basin heated inlet ruler Roller capping pneumatic 0.2 - 3 mm Saw capping rigid 90° - combi milling unit flush + radius Chassis Dimensions 2800 x 1400 x 1400 mm Weight approx. 550 kg Machine is currently still in use ex location NET € 3.200,00
used
Type AKV 88 F Without glue tank Max. edge thickness 3 mm Max workpiece height 50 mm Feed speed : 0-7 m/min (0,25kW) Power consumption 3,2 kW Work table height 890 mm Made in Germany 1996 y. Transport dimensions 1360x680x1220 mm Weight 150 kg
used
Manufacturer: Hebrock, Type: AKV 2001 DK, Year: 1997, Min-max edge material mm: 0,5-3,0, Work piece width min-max mm: 60, Min.-max. workpiece length in mm: 150, Min.-max. workpiece height in mm: 10-45, Min-max feed m/min: 8, Coil magazine: yes, Strip magazin: no, Mitre stations: yes, Pre-milling: Radius, Corner tracing type: yes, 1 motor: yes, Radius scraper: yes, Bonding part EVA: yes, FREE TEXT: Zustand sehr gut, Year :1997
used
Manufacturer: Hebrock, Type: AKV 88 F, Year: 1997, Control: hand, Glue application: no, Edgeband thickness max mm: 3,0, Edgeband height max mm: 50, Edgeband thickness max mm: 3,0, Glue system granulate/cartridge: Wärmedusche, Feeding speed min-max m/min: 0-7, Mitre stations: yes, FREE TEXT: Elektronische Eintellung der Kantenlänge, Year :1997
used
Manufacturer: Hebrock, Type: TF 03, Year: 1998, Edgeband thickness max mm: 3, Edgeband height max mm: 50, Kopierfunktion single sided: yes, Tracing by roller: yes, Arbeitstakt automatisch: yes, Engine milling kW: 0.5, Machine lenght mm: 1000, Compressed air bar: 6, Wight approx. kg: 200, mit Schwabbelstation, Year :1998
used
max. edge thickness: approx. 3 mm max. workpiece height: approx. 50 mm min. Internal radius of panel: approx. 40 mm 2 motors each 0,37 kW Combined tooling chamfer and radius Milling speed : 12000 rpm Work table height: 865 mm Radius 3 mm tooling
used
edge thickness: 0,5 - 3 mm, workpiece thickness: 10 - 45 mm, gluing unit: ja / yes, snipping unit: ja / yes, fine trimming unit: ja / yes, Approx. Onsite Dimension. (l x w x h): 3,500 x 1,500 x 1,800 mm, weight approx.: 700 kg
used
Moulded part radius milling machine with saw edge protrusion
used
Radius/flush milling machine, edge milling machine, edge milling machine, molded part milling machine For simultaneous upper and lower radius/flush milling of protruding edge materials on straight edges as well as curved workpieces with inner and outer radii -Built-in milling cutter: 30 ° -Dimensions: 1000/600/H1450 mm -Weight: 60 kg
used
Radius profile scraper IMA 08.263
used
Radius profile scraper IMA Type: 08.515
used
Suitable for processing door seals, control: SIEMENS SIMATIC, with documentation, an on-site inspection is possible.
used
Radius cutter, milling cutter -Finishing cutter -Various: diameter -Various: manufacturers -Type: HSS and SS -Number: 17 pieces -Sale: only complete -Weight: 5 kg
used
Radius cutter, milling cutter -Finishing cutter -Various: diameter -Various: manufacturers -Type: HSS and SS -Number: 16 pieces -Sale: only complete -Weight: 9 kg
used
Radius cutter, milling cutter -Finishing cutter: -1x diameter: 115 mm height 36 mm R18 mm -1x diameter: 120mm height 35mm R17.5mm -1x diameter: 90 mm height 20 mm R10 mm -1x diameter: 120mm height 40 mm R 20 mm -Type: HSS and SS -Number: 4 pieces -Sale: only complete -Weight: 5.6 kg
used
Radius cutter, milling cutter -Finishing cutter -1x diameter: 84 mm height 44 mm R12 mm -1x diameter: 102 mm height 53 mm R15 mm -1x diameter: 114 mm height 70 mm R20 mm -Type: HSS -Number: 3 pieces -Sale: only complete -Weight: 5.4 kg
new
Panel thickness (min/max) 5/50 mm Cutterhead rotation speed 30000 rpm Motor power 0,8 kW Table dimensions 320x440mm Milling axis Ø 6 mm Sufficient and constant compressed air Ø 6 mm Power 220 V/50Hz Transport dimensions 720x500x470 mm Weight 25 kg Price 299 Eur (EXW Jonava, Lithuania
used
Panel thickness (min/max) 5/50 mm Cutterhead rotation speed 30000 rpm Motor power 0,8 kW Table dimensions 320x440mm Milling axis Ø 6 mm Sufficient and constant compressed air Ø 6 mm Power 220 V/50Hz Transport dimensions 720x500x470 mm Weight 25 kg Price 299 Eur (EXW Jonava, Lithuania