used HAUSER Grinding Machines

DRO- ELESTA x-travel 650 mm y-travel 450 mm z-travel 140 mm w-travel (head) 500 mm feed range 0 - 1500 mm/min table surface area 770 x 630 mm spindle speed 4.500- 80.000 rpm spindle speed with turbine 100.000- 160.000 rpm Perfect condition. Just start up and test run, about 200 hours.

Code 9602 DESCRIPTION Vertical JIG Grinder Make HAUSER Modell 3 SMO Serial No. 257 Machine No. 1519-2564 Table surface 600 x 320 mm Table movement longitude (X) 400 mm Table movement cross (Y) 250 mm Max. grinding diameter Ø 190 mm Column-Spindle 300 mm Max. height under spindle 500 mm Vertical movement spindle 90 mm Vertical movement grindinghead 500 mm Max. speeds grindingspindle up to 80.000 omw./min Weight 2000 kg Total power 6,6 kW – 380 Volts Accessories Grinding spindles, etc. Condition Machine is in good condition

stroke 700 mm Y stroke 500 mm workpiece height 675 mm table surface area 900 x 770 mm daylight column 840 mm turning speed range - grinding spindle 9 - 45.000 rpm total power consumption 6.5 kW machine weight approx. 5.5 t machine dimensions approx. 3.6 x 5 m digital control With accessories - see photos in the application.

Jig grinding machine HAUSER S50

CNC coordinate grinding machine - HAUSER S 35 400 TECHNICAL SPECIFICATIONS: CN Type: FANUC Series O-M RS232 port: Yes X-axis stroke: 500 [mm] X-axis working speed: 0 - 1200 [mm/min] Y-axis stroke: 300 [mm] Speed working advances Y-axis: 0 - 1200 [mm/min] Z-axis stroke: 110 [mm] Z-axis working forward speed: 0.5 - 12000 [mm/min] Z-axis stroke frequency: max. 4 [Hz] W-axis stroke: 450 [mm] C-axis velocity (planetary): 5 - 250 [rpm] Table length: 600 [mm] Table width: 380 [mm] Maximum weight. Table allowable: 250 [Kg] Watering pump flow: 60 [l/min] Watering tray capacity: 125 [l] Supply voltage: 400 [V] Installed capacity: 10 [kVA] Weight: 4100 [kg] EQUIPMENT INCLUDED: x1 HI-CUT pack including: - protection of the work area - exhaust device with electrostatic air filter - fire protection device (to be submitted to the expertise of a qualified body) -  ...

2-axis digital display Travel X/Y/Z: 400/250/500 mm Optical rotary table D 300 mm + adapter plate D 400 mm Swivel rotary table D 200 mm Lots of accessories

Article code: 14-04-011 Manufacturer: Hauser Very good general condition Machine workshop-tested Shipping time: All rights reserved. Year of construction: ca.1969 L x W x H: approx. 1500x1200x1800mm Weight: approx. 1800kg Digital display: 2-axis Working area: approx. 400x250mm Direct reading accuracy: approx. 0.001mm Accuracy of carriage adjustment: approx. 0.002mm Grinding diameter: approx. Ø220mm Lifting speed: approx. 0-6 m/min Speed: approx. 50000 rpm Accessories  Extensive range of accessories / See pictures Other accessories on request Price and other technical data on request

Grinding spindle to Hauser coordinate grinding machines. 2 electric spindles with mounting shaft 3mm and 1 compressed air grinding spindle for receiving shaft 3mm. All spindles are tested for function.

x-travel: 400 mm y-travel: 250 mm workpiece height: 500 mm grinding diameter max.: 220 mm table surface area: 600 x 320 mm throat: 310 mm range of angles: 12 grad grinding spindle slide - vertical movement: 110 mm stroke speeds: 0 - 6 m/min. grinding spindle speed: bis 50.000 U/min. peripheral speed: max. 35 m/sec capacity: ca. 7 kVA power capacity: 6 kW weight of the machine ca.: 2 t dimensions of the machine ca.: 3 x 3 x 3 m Frequence converter make LANDERT, type SGU 160 - range : 150 - 1330 Hz, feed motion in the table The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

It is a very precise and working machine adjustment range X 400 mm, Y 250 mm, W (grinding head) 250 mm, feed X and Y 0 to 1800 mm/min, W 0 to 3000 mm/min, table 600 x 380 mm, maximum table load 200 kg, grinding spindle speeds with electric motor 9 to 45000 rpm, with air turbines up to 100000 and 160000 rpm, planetary rotation stepless 5 to 300 rpm, stroke speed of grinding spindle sleeve with quick stroke 0,5 to 12000 mm/min, stroke of grinding spindle sleeve 110 mm, diameter of grinding spindle sleeve 100 mm, NEW control: ADCOS CNC 800 (Swiss made) - RETROFIT !!! http://www.adcos.ch/site/index.cfm?id_art=96324&actMenuItemID=44488&vs prache=DE read operating hours 64940, spindle hours 7633(July 2023) with dressing spindle system: KAISER C 42 DC, magnetic clamping plate , with fire extinguishing device: Kraft Bauer

Description: Year of construction: probably 1979 Serial number: 274 Smallest display unit: 0.001 mm Zero point can be selected as required Guaranteed positioning accuracy: 0.002 mm Power requirement of the machine: 7 kW Suction capacity of the air compressor: approx. 9 m³/h Working area: Usable table surface: 595 x 320 mm Adjustment range of the table: 400 x 250 mm Stroke of the vertical slide: approx. 500 mm Max. Clearance between the sanding motor and table: approx. 480 mm Distance between spindle center and vertical slide: 310 mm Max. Sanding diameter: approx. 220 mm Sanding diameter with intermediate plate: approx. 280 mm Max. included angle for conical sanding: 12° Sanding head: Vertical stroke of the sanding spindle, infinitely variable: 3 - 110 mm Stroke speed, infinitely variable: up to 6 m/min Speed of the planetary movement, infinitely variable: approx. 5 - 330 rpm Speed rang ...

Description: Year of construction: probably 1986 Adjustment range: In the X-axis (table slide): 900 mm In the Y-axis (sanding head): 600 mm In the W-axis (moving crossbeam): 635 mm Feed speed: In the X- and Y-axis, direct current drive, infinitely variable: 5 - 2500 mm/min In the W-axis, three-phase drive: approx. 800 mm/min Measured value display: Smallest display unit: 0.001 mm Zero point can be selected as required Positioning accuracy (basic deviation X, Y): 0.004 mm Table: Usable table surface: 1020 x 860 mm Permissible table load: max. 800 kg Width of the T-slots: 14 mm Number of T-slots: 7 Distance between the T-slots: 100 mm Working range of the sanding head: Grinding spindle speeds, infinitely variable with electric motors: 4500 - 80000 rpm With air turbines up to 100000 and 160000 rpm Planetary speed, infinitely variable: 5 - 250 rpm Stroke of the grinding spindle sleeve: max.  ...

x-travel:400 mm y-travel:250 mm workpiece height:max. 500 mm z-travel:500 mm table clamping surface LxW:550x330 mm power requirement:6 kW Total weight, approx.:2200 kg round table d = 300 mm

Technical data Table length: 550 mm Table width: 320 mm Longitudinal travel (X-axis): 400 mm Transversal travel (y-axis): 250 mm Vertical travel (z axis): 400 mm Table load max.: 400 kg Drill capacity in steel: 20 mm Taper in spindle: MT: 2 Stroke of drilling spindle (Z-axis): 130 mm Bore diameter max.: 75 mm Distance table to spindle: 590 mm Spindle speeds: stepless from: 60 rpm up to: 3000 rpm Feeds: Drill spindle slide: number (steps): 2 from: 0.03 mm/r up to: 0.06 mm/r Voltage 50 Hz 3x: 380 Volt Spindle motor: 0.80 HP Machine´s weight about: 1100 kg Overall dimensions machine: Length: 1200 mm Width: 1150 mm Height: 1650 mm Various accessories: Lamp

Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Table length: 0 mm Table width: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Table length: 400 mm Table width: 300 mm Longitudinal travel (X-axis): 200 mm Transversal travel (y-axis): 200 mm Verticla travel (W-axis): 250 mm Drill capacity in steel: 10 mm Drill depth (spindle stroke): 70 mm Distance table to spindle: 320 mm Spindle speeds: stepless from: 150 rpm up to: 3000 rpm Voltage 50 Hz 3x: 380 Volt Spindle motor: 0.5 HP Machine´s weight about: 700 kg Overall dimensions machine: Length: 1200 mm Width: 1000 mm Height: 1800 mm Various accessories: Digital readout number of axis:: 2 Drill chuck Centering microscop Set of collets

Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Table length: 0 mm Table width: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Table length: 400 mm Table width: 300 mm Longitudinal travel (X-axis): 200 mm Transversal travel (y-axis): 200 mm Verticla travel (W-axis): 250 mm Drill capacity in steel: 10 mm Drill depth (spindle stroke): 70 mm Distance table to spindle: 320 mm Spindle speeds: stepless from: 150 rpm up to: 3000 rpm Voltage 50 Hz 3x: 380 Volt Spindle motor: 0.5 HP Machine´s weight about: 700 kg Overall dimensions machine: Length: 1200 mm Width: 1000 mm Height: 1800 mm Various accessories: Digital readout number of axis:: 2 Manufacturer: HEIDENHAIN Rotary table diameter: 300 mm Drill chuck Boring head Microscope Centering divice with dial indicator Set of collets Lamp

Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Table length: 0 mm Table width: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Table length: 550 mm Table width: 320 mm Longitudinal travel (X-axis): 400 mm Transversal travel (y-axis): 250 mm Vertical travel (z axis): 400 mm Drill capacity in steel: 20 mm Taper in spindle: MT: 2 Stroke of drilling spindle (Z-axis): 130 mm Bore diameter max.: 75 mm Distance table to spindle: 600 mm Spindle speeds: stepless from: 120 rpm up to: 3000 rpm Feeds: Drill spindle slide: number (steps): 2 from: 0.03 mm/r up to: 0.06 mm/r Voltage 50 Hz 3x: 380 Volt Spindle motor: 0.75 HP Machine´s weight about: 1500 kg Overall dimensions machine: Length: 1400 mm Width: 1500 mm Height: 2100 mm Various accessories: Tool cabinet Drill chuck Set of drills Set of milling cutters

Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Table length: 0 mm Table width: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Table length: 400 mm Table width: 300 mm Longitudinal travel (X-axis): 200 mm Transversal travel (y-axis): 200 mm Vertical travel (z axis): 250 mm Drill capacity in steel: 10 mm Taper in spindle: MT Drill depth (spindle stroke): 70 mm Distance table to spindle: 320 mm Spindle speeds: stepless from: 150 rpm up to: 3000 rpm Feeds: Drill spindle slide: from: 0.015 mm/r Voltage 50 Hz 3x: 380 Volt Spindle motor: 0.5 HP Machine´s weight about: 700 kg Overall dimensions machine: Length: 1200 mm Width: 1000 mm Height: 1800 mm Various accessories: Digital readout number of axis:: 2 Manufacturer: PHILIPS Drill chuck Set of boring head Centering microscop Set of drills Device for laying out

Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Table length: 0 mm Table width: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Table length: 400 mm Table width: 300 mm Longitudinal travel (X-axis): 200 mm Transversal travel (y-axis): 200 mm Vertical travel (z axis): 250 mm Drill capacity in steel: 10 mm Taper in spindle: MT: 0 Drill depth (spindle stroke): 70 mm Distance table to spindle: 320 mm Spindle speeds: stepless from: 150 rpm up to: 3000 rpm Feeds: Drill spindle slide: from: 0.015 mm/r Voltage 50 Hz 3x: 380 Volt Spindle motor: 0.5 HP Machine´s weight about: 700 kg Overall dimensions machine: Length: 1200 mm Width: 1000 mm Height: 1800 mm Various accessories: Digital readout number of axis:: 2 Manufacturer: ELESTA Rotary table diameter: (Ref. 0330.2) Ø 300 mm Drill chuck Set of boring head Microscope Centering microscop Centering divice with dial indicator Set of collet ...

Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Table length: 0 mm Table width: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Table length: 550 mm Table width: 320 mm Longitudinal travel (X-axis): 400 mm Transversal travel (y-axis): 250 mm Vertical travel (z axis): 400 mm Table load max.: 400 kg Drill capacity in steel: 20 mm Taper in spindle: MT: 2 Stroke of drilling spindle (Z-axis): 130 mm Bore diameter max.: 75 mm Distance table to spindle: 590 mm Spindle speeds: stepless from: 60 rpm up to: 3000 rpm Feeds: Drill spindle slide: number (steps): 2 from: 0.03 mm/r up to: 0.06 mm/r Voltage 50 Hz 3x: 380 Volt Spindle motor: 0.80 HP Machine´s weight about: 1100 kg Overall dimensions machine: Length: 1200 mm Width: 1150 mm Height: 1650 mm Various accessories: Lamp

Technical data Table length: 550 mm Table width: 320 mm Longitudinal travel (X-axis): 400 mm Transversal travel (y-axis): 250 mm Vertical travel (z axis): 400 mm Drill capacity in steel: 20 mm Taper in spindle: MT: 2 Stroke of drilling spindle (Z-axis): 130 mm Bore diameter max.: 75 mm Distance table to spindle: 600 mm Spindle speeds: stepless from: 120 rpm up to: 3000 rpm Feeds: Drill spindle slide: number (steps): 2 from: 0.03 mm/r up to: 0.06 mm/r Voltage 50 Hz 3x: 380 Volt Spindle motor: 0.75 HP Machine´s weight about: 1500 kg Overall dimensions machine: Length: 1400 mm Width: 1500 mm Height: 2100 mm Various accessories: Digital readout number of axis:: 2 Manufacturer: ACU RITE III Rotary table diameter

Technical data Table length: 550 mm Table width: 320 mm Longitudinal travel (X-axis): 400 mm Transversal travel (y-axis): 250 mm Vertical travel (z axis): 400 mm Table load max.: 400 kg Drill capacity in steel: 20 mm Taper in spindle: MT: 2 Stroke of drilling spindle (Z-axis): 130 mm Bore diameter max.: 75 mm Distance table to spindle: 590 mm Spindle speeds: stepless from: 60 rpm up to: 3000 rpm Feeds: Drill spindle slide: number (steps): 2 from: 0.03 mm/r up to: 0.06 mm/r Voltage 50 Hz 3x: 380 Volt Spindle motor: 0.80 HP Machine´s weight about: 1100 kg Overall dimensions machine: Length: 1200 mm Width: 1150 mm Height: 1650 mm Various accessories: Digital readout number of axis:: 3 Manufacturer: PHILIPS Rotary table diameter: 380 mm

Control: CNC 314 / POSELESTA II / (X, Y, Z, W) Operating hours: 13000 Technical data Table length: 600 mm Table width: 380 mm Longitudinal travel (X-axis): 400 mm Transversal travel (y-axis): 250 mm Vertical travel (z axis): 450 mm Table load max.: 300 kg Drill capacity in steel: 30 mm Taper in spindle: ISO: 30 Stroke of drilling spindle (Z-axis): 140 mm Bore diameter max.: 220 mm Distance table to spindle: 0 - 550 mm Spindle speeds: stepless from: 30 rpm up to: 4000 rpm Feeds: from: 500 mm/min up to: 1000 mm/min Drill spindle slide: number (steps): 4 from: 0.01 mm/r up to: 0.23 mm/r Voltage 50 Hz 3x: 380 Volt Machine´s weight about: 3500 kg Overall dimensions machine: Length: 1900 mm Width: 1700 mm Various accessories: Manufacturer: ELESTA Visulesta II

Jig boring/Milling machine HAUSER 3DR Travel X: 400 mm Travel Y: 200 mm Travel Z: 400 mm Spindle: 2 speeds Cone:CM2 Spindle exit: 120 mm 2 speed ranges 60-1500 RPM / 1500-3000 RPM Table size: L 590 mm x W 320 mm Speed variator at the spindle 2 advances Auto descent: 0,03 mm/min - 0,06 mm/min X-axis functional with Mitutoyo devise Y and Z axis: defective scale Voltage: 380 V Width: 1500 mm Depth: 1700 mm Height in low position: 1800 mm Weight: approx 1,5 T

Travel X-axis 200 mm Y-axis 200 mm Z-axis 250 mm Clamping table Table clamping surface 400 x 300 mm Head Spindle speed 100 – 3000 rpm Spindle holder MK 0 Quill stroke 70 mm Sony digital display, 2 axes Accessories according to pictures Vice Collets Centering microscope Condition The machine comes from a technical school and is in good condition