We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
used
Press capacity: 80 ton Ram stroke adjustable: 4 -60 mm Slide adjustment: 0 - 80 mm Shut height (stroke down, adjustment up): 310 mm Free frontal opening L-R: 800 mm Table height over floor: 1150 mm Table surface area : 780 x 640 mm Slide area: 800 x 460 mm Hole in table: 690 x 170 mm Number of strokes: 30 - 300 s.p.m. Required power: 21 kW Height over floor approx.: 2900 mm Weight of machine approx.: 12 ton Control: Siemens S5
used
Capacity: 125 ton, Strokes per minute: 85-500 / min, Slide: 870 x 550 mm, Plate width: 260 mm, Year of manufacturing: 1980
used
pressure: 63 t no. of strokes: 70-420 Hub/min sheet width: 160 mm ram - range of adjustment: 80 mm : 300 mm table surface area: 750x660 mm ram surface: 690x460 mm total power requirement: 11 kW weight of the machine ca.: 10 t dimensions of the machine ca.: 2500x2500x3000 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
pressure: 160 t dayligth: 700 mm number of strokes adjustable: 30 - 180 min table-size: 1600 x 640 mm ram surface: 1440 x 950 mm distance between columns: 1600 mm hole in the table: 1300 x 350 mm ram adjustment: 100 mm daylight between the side columns: 640 x 700 mm stroke of ram - solid: 40 mm total power requirement: 30 kW weight of the machine ca.: 25 t dimensions of the machine ca.: ca. 3 x 2,3 x 4 m - With hydraulic overload - With shuttle table device Machinewill be partly recondition (with new paint, new cabinet) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
pressure: 125 t stroke: 10-80 mm no. of strokes: 240 Hub/min ram - range of adjustment: 80 mm table surface area: 850x600 mm ram surface: 760x550 mm hole in the table: 850x130 verstellbar mm table height: 1100 mm tool hole in ram: Ø 50 mm total power requirement: kW weight of the machine ca.: 13 t dimensions of the machine ca.: BxTxH: 3000x2000x3300 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
pressure: 63 t stroke: 6-60 mm no. of strokes: 90-550 Hub/min : 300 mm table surface area: 780x600 mm ram surface: 807x460 mm tool hole in ram: Ø 40 mm total power requirement: 15 kW weight of the machine ca.: 8 t dimensions of the machine ca.: BxTxH 2900x2000x3000 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Eccentric punching machine HAULICK + ROOS type RVD 125 double column - eccentric press machine No. 212560 Year of construction 1981 Compressive force 125 ton. Table size: 880 x 800 mm, table opening: 470 x 140 mm, stand width: 900 mm, lateral column width: 415 mm, ram stroke: 45 mm, ram adjustment range: 0-80 mm, installation height in the picture: 340 mm , stroke rate: 50 to 300 strokes/min. Engine power main drive 22 kW Mains connection 380 volts, 50 Hz - Double connecting rod engine with 4-bearing eccentric shaft for off-center ram pressure Load - adjacent electrical cabinet - NC roller feed EBU, width 250 mm, year of construction 2003 - adjacent control panel for the roller feeder - strip running direction from left to right Space requirement (press) L x W x H 3000 x 2000 x 3020 mm Transport height 2950 mm Weight of the press about 11 ton.; used
used
pressure:040 t stroke:8 - 50 mm no. of strokes:50 - 300 /min distance between columns:600 mm distance table/ram, max. stroke up, adjustment up:285 mm table surface area:590 x 500 mm hole in the table:590 x 40 - 100 mm table height over floor:860 mm column travel -side:280 mm ram surface:590 x 380 mm ram adjustment:80 mm material width of feeder:150 mm power requirement:7,5 kW clutch:pneumatic ram adjustment:motoric pincer feed:mechanical
used
pressure:160 t stroke:160 fix mm no. of strokes:30 - 120 /min distance between columns:1190 mm distance table/ram, max. stroke up, adjustment up:735 mm table surface area:1200 x 1000 mm hole in the table:500 x 300 mm table height over floor:900 mm side window:600 mm ram surface:1000 x 800 mm ram adjustment:125 mm material width of feeder:550 mm material thickness of feeder:0 - 6,0 mm feed length:350 mm material cross-cut:1100 mm² Feed speed:50 m/min power requirement:45,0 kW weight:25,0 t dimensions (WxDxH):2,3 x 2,1 x 4,7 m infinitely variable drive:PIV overload protection in ram:hydraulic ram adjustment:motoric ram counterbalance:pneumatic pincer feed:mechanisch, RS 350/550 SL 90
used
HAULICK HPV 75 Eccentric Press Maximum pressing force 75 t Bottom working table 640x540 mm Maximum number of strokes per minute (manual work) 50 spm Maximum number of strokes per minute (automatic work) 270 spm Min. length of the slider stroke 7 mm Max. length of the slider stroke 78 mm Certified by SCHULER 04.08.2012
used
Bouncing lid - sealing machine, make TBL, type LVS - 04.6, year 2/2008, was used to force open a plastic closure on plastic cans (chewing gum),, Lid press station with Taktomat type XP50 code: 04-240, machine number P80024, Strap length: approx. 2,400 mm, smooth black strap, usable width: approx. 70 mm,, Working height: 940 mm, +/- 50 mm,, Aluminum casing, Compressed air requirement: at least 6 bar,
Force of pressure: 63 t table size: 610 x 800 mm throat depth: 350 mm stroke: 200 mm Electr. Supply: 380 V, 15 kW space: 1800 x 920 x 2440 mm weight: 3940 kg
used
Pressing force: 160 kN Impact stroke: 100 mm Mounting height: 350 mm Hole in the table: 100 mm Pushhole bore: 32 mm Stand passage: 650 mm Table size: 630 x 400 mm Hydraulic pressure: 280 bar electr. Connection: 380 V, 5.5 kW Space requirement: 1550 x 1050 x 2400 mm Weight approx.: 3 t
used
Stroke power: 180 KN (18 tons). Adjustable speed: 100 - 600 strokes per minute. Adjustable stroke: 4 - 36 mm. In very good working condition. Feeder: BBV 60/60 Max. Strip Width: 60 mm. Max. Feeding Length: 60 mm. Max. Thickness: 2 mm. With stroke and speed counter. Programmable speed, number of strokes etc. Three working modes: manual, one stroke and automatic. Heavy Duty, for non stop production. Pneumatic clutch and brake. Machine with warranty 6 months. Machine dimensions: 600 mm x 600 mm x 1850 mm. Machine weight: approx 1.2 tons. Power consumption: 2.2 KW. Technical Air: 8 bar.
used
High Speed Precision Press Maker Obata (Japan) Year of manufacturing - 1981 Capacity 10 t Stroke length 22 mm Speed 100-400 stroke/min price 6000 EUR
used
Bruderer press. Year of production: 1985 Condition: perfect The press has a soundproofing cabin and a roll feeder.
used
Bruderer Automatic Precision Punching Press. Type: BSTA 110H. Max. Pressure: 1100 kN (110 T). Speed range: 100 – 800 spm. Year of production: 1976. Fitted with roller-gripper feed unit BBV 320/200 on left-hand side. Max. strip width: 400 mm. Max. strip thickness: 12 mm. Max. feeding pitch: 200 mm. Adjustable stroke: 16-75. Ram height adjustment: 89 mm. Max. Tool width clearance between columns: 1170 mm. Weight of machine: cca. 26000 kg. Electrical cabinet and control. Oil pump. Oil cooler. Fitted with spring feet dampers. Front and rear safety guards with inspection glass.
used
Manufacturer: AIDA ENGINEERING LTD. Made in: Japan Presses are never used, condition is like new. Feeders and straighteners are available. Capacity: 80 tons Rated tonnage point: 6,5 mm Stroke: 200 mm Number of strokes per minute: 60-150 Bolster area (left-to-right x front-to-back): 1400 x 500 mm Slide area (left-to-right x front-to-back): 1400 x 500 mm Bolster thickness: 200 mm Distance between slide and bolster: 450 mm Slide adjustment: 50 mm Main motor: 45 kW Required air pressure: 5 kgf/cm² Total weight: 33 tons Roll feed Material width: 70=300 mm Material thickness: 0,25-0,4 mm Feed length: 50-120 mm Feed angle: 300-60 deg Uncoiler Coil diameter: 800-1200 mm
used
Schaal SEP 40 Automatic Punching Press. Year of manufacture: 1993. Completely revised in 2023 with new Siemens PLC control. Nominal capacity: 400 [kN] (40 [t]). Min./Max. number of strokes: 100 – 500. Ram adjustment: 70 [mm]. Variable stroke: 8 – 70 [mm]. Ram surface area: 340 – 300 [mm]. Stroke range: 8, 10, 15, 20, 25, 31, 36, 41, 46, 50, 54, 58, 61, 64, 66, 68, 69, 70 [mm]. Table dimensions: 550 x 580 [mm]. Fitted with gripper feeding device SZV 2. Width of strip: 8 - 120 [mm]. Feed length: 2 – 80 [mm]. Feeding thickness: 0.1 – 2 [mm]. Feeding: 180 [°]. Feed accuracy: ±0.01 [mm]. Drive power: 7,5 [kW]. Dimensions (H x W x L): 2300 x 1600 x 1400 [mm]. Weight: 3800 [kg]. Including operating instructions in German and English and schematics included. Also on stock high speed presses: Mabu, Schaal, Bihler and other Bruderer models. Also Ideal BAS welders
used
Mechanical Press Kažinin Gooseneck Worktop 1050x1200 Capacity 630 ton
used
Make: MABU Model: 25 VPR. Made in Germany. Max. Pressure: 250 [kN] (25 [T]) Speed range: 80-400 [spm]. Year of manufacture: 1998. Operating modes: Manual, One-cycle and Automatic. Equipped with two hand start and foot-clamp start. Fixed stroke: 17 [mm]. Ram adjustment: 40 [mm]. Max. Tool dimensions: 400 x 400 [mm]. Power: 3 [kw]. Current: 230 / 400 [V]. Air connection: 5.5 [bar]. Feeder: Silicon SFS 200 on left-hand side. Max. strip width: 200 [mm]. Machine dimensions: H 2350 x W 1700 x D 1400 [mm]. Weight of machine: cca. 2500 [kg]. Electrical cabinet with Mabu Pf 1.3 control. Front and rear safety guards with inspection glass. Technical documentation and operating instructions in English and German included. CE certificate and EUR-1 certificate of origin. On stock, tested and ready for delivery. More used machines from Mabu, Bruderer, Bihler and Schaal available ...
used
Bruderer BSTA200M High-performance automatic punching press. Max. pressure: 200 [kN] (20 [T]). Speed range: 100 - 1800 [spm]. Year of manufacture: 1996. Feed BBV 101/75 on the right-hand side. Max. strip width: 125 [mm]. Max. feed distance: 75 [mm]. Adjustable stroke: 8; 13; 19; 25; 32; 38; 44; 51 [mm]. Ram height adjustment: 51 [mm]. Dimensions of the clamping plate (clamping plate): 510 x 400 [mm]. Bed opening: 400 x 160 [mm]. Mbawvyqg Max. distance of the mold width between the columns: 410 [mm]. Max. strip passage width: 260 [mm].= Connected load: 36 [kVA]. Power 400 [V] 50 [Hz]. Control voltage: 24 [V]. Machine dimensions: H 2540 x W 1661 x D 855 [mm]. Machine weight: approx. 3100 [kg]. Control cabinet and control system. Including all original technical documentation. Also high-speed presses in stock: Mabu, Schaal, Bihler and other Bruderer models.
used
45 Number of conrods 2 Table dimensions ( x-y/mm) 700 X 450 Slide Dimensions X-Y (mm) 700 X 360 Stroke (mm) 10 - 50 Light at T.D.C.*(mm) 305 Strokes type Adjustable Stroke per minute 80 - 400 Location Germany Machine Conditions Ce Marked
used
High speed press Original Manufacturer by: BRUDERER Type: BSTA 30 Technical data: Stroke power 300 KN (30 tons) Adjustable speed 100 - 600 strokes per minute up to 10 strokes in one second Equipped with synchronized BBV feeder Feed pitch up to max. 60 mm adjustable, highly accurate With PLC control Three working mode: single punch, complete stroke and full automatic Emergency stop Pneumatic clutch and brake Weight approx 2.5t Automatic in feed, fully synchronized with punching moment Tool and coiler not included (price on request) Technical Air 8 bar Operators instruction manual Machine with new CE certificate Overhauled - Rebuilt by Silicon plus
pressure:40 t stroke:250 mm return capacity:6,3 t motor:5,5 kw Max Working height:450 mm :90 mm/sec. :10 mm/sec. spindle stroke:250 mm pestle plate:500 x 200 mm table plate:600 x 650 mit T-Nuten mm Table cut-out:200 x 170 mm table height:850 mm :200 l