used HARRISON Engine Lathes Sliding Surfacing And Screw Cutting Lathes

Key data: 200 mm, 400 mm, 40 U/min

Harrison in TOP CONDITION. SH 200 mm SW 1500 mm Tailstock MK5 Removable bridge Emergency Out , Bremese , Feed Protection Coolant system Face plate 2 lathe chuck Grinding device Cabinet with high-quality accessories.

Center height: 0 mm Center distance: 800 mm Spindle bore: 50 mm Make  Harrison 19 Type 190 Year 70 er LUZ Universal drehmaschine draaibank Centre height (mm) Swing = 380 Center distance (mm) DBC = 800 Spindle bore Bore = 50 Speeds 1500 Rpm chuck / tool system  

Center height: 200 mm Center width: 1250 mm gr. Turn-Ø over bed: 400 mm Spindle bore: 55 mm Spindle holder: Camlock D1 6" mm Pick-up cone of tailstock quilts: 5 MK Spindle speeds: 1-297/1-861/1-2700 rpm electr. Connection: 400 V, 7.5 kW Space requirement: 2900 x 1800 x 1500 mm Weight: 2200 kg

This Harrison M390 Lathe was manufactured in the year 2004 in United Kingdom. It has 2 axis. The machine has a spindle speed of 2000 rpm.

Harrison M500 Ø 530 x 2000 mm Distance between centers: 2000 mm Swing over bed: 530 mm Swing over cross-slide: 370 mm Swing in gap: 730 mm (200 mm long) Diametre of main spindle bore: 80 mm Power on main spindle: 9,7 kW Number of speeds: 31 > 1600 rpm Length: 3450 mm Width : 1170 mm Height: 1830 mm Weight: 2277 kg

Key data: 380 mm, 1200 mm

Turning length: 1200 mm Rotation diameter: 380 mm above bed Spindle Passage: 50 mm Spindle speeds: 35 - 1,500 rpm. Equipped with: - 3-jaw chuck with different jaws - Steel tank Country of origin: UK Machine LxWxH: 2500 x 950 x 1200 mm Machine weight: 1200 kg

: 554 mm : 2000 mm : : 277 mm : 104 mm : 400 mm : 2000 U/min : D1-11 DIN 55029 : 95 mm : 145 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 554 mm : 2000 mm : : 277 mm : 104 mm : 400 mm : 2000 U/min : D1-11 DIN 55029 : 95 mm : 145 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Universal milling machine Speed 90 - 2000 rpm x 650 mm Y 300 mm Z 400 mm Feed rate in x electric Coolant pump Accessories Weight 1 ton

Universal milling machine Speed 90 - 2000 rpm x 650 mm Y 300 mm Z 400 mm Feed rate in x electric Coolant pump Accessories Weight 1 ton

: 0400 mm : 1250 mm : : 200 mm : 55 mm : 315 mm : 2700 U/min : D1-6 DIN 55029 : 73 mm : 140 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 330 mm turning diameter over slide rest: 210 mm turning length: 1000 mm turning diameter in the gap: 380 mm turning speeds: 40 - 2500 U/min centre height: 165 mm spindle bore: 38 mm total power requirement: 2,2 kW weight of the machine ca.: 0,7 t dimensions of the machine ca.: 2,1 x0,9 x 1,3 m Lead and pull spindle lathe - Rapid traverse - 3-jaw chuck 160mm - Collet chuck - 4-way quick-change steel holder - 2 pcs bezels - Coolant system - Feed protection - chip trays - Chip protection wall - Emergency stop facility - Foot brake - Operating manual The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Description Machine in excellent condition, still installed by the user Specifications Harrison Producer Model 1460 Year 2003 Condition Used CNC FANUC Maximum workable length * 1 (capacity) 1500 bar passage 78 spindle connection ASA 8 spindle speed 2200 spindle power 11 kw spindle 300 mm manual turret 4 positions turning on the wagon 270

turning diameter: 554 mm turning length: 1000 mm control: Fanuc total power requirement: 11 kW weight of the machine ca.: 2,7 t dimensions of the machine ca.: 2,6 x 1,6 x 1,8 m HARRISON alpha 550 cycle lathe, used Controller: Fanuc Turning diameter: 554 mm Turning length: 1,000 mm Spindle passage: 90 mm Spindle: Speed (max.): 1,800 rpm Speed levels: 9 Power: 11kW Spindle passage (approx.): 90 mm Workpiece clamping: 3-jaw chuck, ø315 mm Tool carrier: Technology: quick-change holder on cross slide Travel in X: 310 mm Tailstock: Technology: Manual tailstock Quill ø: 95 mm Stroke: 145mm Taper: MK 6 Equipment/accessories: Chip management: chip tray Coolant management: KSS pump Shaft Machining: Fixed Bezel The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning length: 1.200 mm Height of centres: 400 mm swing over bed: 800 mm diameter over cross-slide max.: 510 mm control: FANUC 21i-TB spindle bore: 250 mm Lathe - cycle-controlled | HARRISON - ALPHA 2800XS The machine is in a well-maintained condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: a 2800XS | ALPHA2800XS | ALPHA-2800XS | ALPHA 2800 | ALPHA2800 | ALPHA- 2800 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : 2015 : 1686 : ca. 2 Wochen ab Auftragse : 22800 € : 1 : 330 mm : 1000 mm : 167 mm : 38 mm : 210 mm : 12 : 40 - 2500 1/min : 16 : 0.03 - 1 mm/U : 0.2 - 14 mm : 2 - 56 TPI Gänge/ : 190 mm : 92 mm : 42 mm : 3 MK : 110 mm : 2,2 kW : 1900 mm : 1000 mm : 1550 mm : 685 kg 3-axis digital read out Newall 4-jaw chuck Bison diameter 160mm with inside and outside jaws Quick-change tool post with 1 hold Coolant device Chuck protection Steel holder protection Lead screw cover Machine light Manual brake Operating manual in German with EC declaration of conformity The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Description: Center lathe - Rapid traverse - 3-jaw chuck 160mm - Collet chuck - 4-way quick-change steel holder - 2 pcs bezels - Coolant system - Feed protection - chip trays - Chip protection wall - Emergency stop facility - Foot brake - Operating manual Turning diameter over bed 330 mm Turning diameter over support 210 mm Turning length 1000 mm Turning diameter in the offset 380 mm Speed 40 - 2500 rpm Center height 165 mm Spindle bore 38 mm Total power requirement 2.2 kW Machine weight approx. 0.7 t Space requirement approx. 2.1 x 0.9 x 1.3 m Approx. Onsite Dimension. (l x w x h): 2,100 x 900 x 1,300 mm, weight approx.: 700 kg

Tip height: 330 mm centre distance: 1500 mm circular diameter: bed 690 mm spindle bore: 82 mm spindle retainer: short taper size 8 taper tailstock: 6 MK spindle speed: 7.1-1400 rpm feeds: longitudinal/plan 0.05 112/0.025 56 mm / U thread pitches: 0.25-560 mm electrical connection: 380 V, 15 kW space: 3350 x 1800 x 1400 mm weight: 4800 kg

Tip height: about quilt 300 mm centre distance: 1500 mm circular diameter: upper bed 640 mm spindle bore: 67 mm spindle retainer: Gr. 8 taper tailstock: 5 MK spindle speed: 18 - 900 rpm feeds: longitudinal/plan 0.063 0.032 2.1 mm / U thread pitches: 0.5-14 mm electrical connection: 380 V, approx. 7.5 kW space: 1550 x 3100 x 1250 mm weight: approx. 3500 kg hardly used and therefore well-preserved bed lathe

Tip height: 107 mm top width: 350 mm circular diameter: bed 200 mm spindle bore: 25 mm taper tailstock: 2 MK spindle speed: 35 - 3500 rpm feeds: longitudinal and mm/U thread pitches plan: 0.2-3 mm electrical connection: 380 V, approx. 2.2 kW space: 600 x 1300 x 1230 mm weight: 850 kg

Heavy Duty Lathe POREBA Model: TCA 160 /12000 Condition: Excellent, ready to work Year of manufacture: 1963 Complete Offer includes a lot of equipment Technical details : Control: Manual High of centrem over the flat way: 800 mm High of centres over the floor: 1 600 mm Swing over carriage: 1 280 mm Diametre of 4-jaws chuck: 1 600 mm Distance between centres: 12 000 mm Load carrying capacity without steady: 30 000 kg Load carrying capacity with 1 steady: 35 000 kg Load carrying capacity with 2 steady: 40 000 kg Equipment: - head for grinding 2 psc. - constant's lunette 3 psc. - mobile lunette: 1 psc. - milling head 1 psc. - carriages 2 psc. - change gear set, etc

digital display swingdiameter over bed 800 mm swingdiameter over slide 600 mm distance between center 2000 mm spindle speed750 1 / min multifix tailstock

TH 3309 Control and spindle lathe Fixed bezel D = 19-70 mm Revolving bezel D = 16-50 mm LED machine lamp Reduction sleeve MK 3 / MK 5 Motor protection switch Emergency stop foot operated Engine: 400V 1, 5 kW 50 Hz Tip height 156 mm Top width 830 mm Spindle speed 60 - 2000 min-1 16 levels Spindle cone MK 5 Spindle bore D = 38 mm Weight 430 kg Dimensions Lxwxh: 1685 x 745 x 1320 mm G & PIECES 3402030

Made in Italy machine according to DIN 8606 Tip height: 260 mm Turning diameter over bed: 520 mm Swing over carriage: 300 mm Centre distance: 1500 mm Bed width: 400 mm Spindle bore: 82 mm Spindle nose: Camlock 8 " Spindle speeds: (24) 9-1600 rpm (option 11-2000 U/min) Engine output: 5.5 kW (option: 7.5 kW) feed Z-axis: (93) 0.028 6.43 mm / Rev Feed x axis: (93) 0.012 2.73 mm / Rev Thread, metric: (54) 0.5-224 mm Thread, Witworth: (55) 72 - 1/8 TPI Thread, module: (54) 0.5-112 mm Thread, Diametral Pitch: (54) 64 - 1/4 D.P.. Cross slide Lxw: 650 x 230 mm Transversal carriage stroke: 340 mm Upper carriage Lxw: 350 x 150 mm Upper carriage stroke: 150 mm Tailstock Quill diameter: 85 mm Tailstock Quill stroke: 200 mm Tailstock taper: MK 5 Weight: 3,100 kg Facilities: -Movement of the tailstock pneumatically supported -Acceptance Protocol according to DIN 8605, ...

Made in Italy machine according to DIN 8605: lathe with increased accuracy. Tip height: 215 mm Turning diameter over bed: 430 mm Swing over carriage: 240 mm Top width: 1,000 mm Bed width: 290 mm Spindle bore: 52 mm Spindle nose: Camlock 6 " Spindle speeds variable: 6 Spindle speeds: 60-2,000 rpm S6/S1 engine power: 4 kW (option: 5.5 kW) feed Z-axis: (38) 0.05 - 1.88 mm / Rev Feed x axis: (38) 0.02 1,084 mm / Rev Thread cutting, metric: (30) 0.45-20 mm Thread cutting, Witworth: (35) 80-1 3/4 TPI Thread cutting, module: (25) 0.25-10 mm Thread cutting, Diametral Pitch: (30) 160-3 1/2 D.P.. Cross slide Lxw: 370 x 190 mm Transversal carriage stroke: 240 mm Upper carriage Lxw: 275 x 115 mm Upper carriage stroke: 120 mm Tailstock Quill diameter: 60 mm Tailstock Quill stroke: 135 mm Tailstock taper: MK 4 Weight: approx. 2,000 kg Facilities: -Infinitely variable  ...