used HANSEN Gear motors

new, unused Right Angle Shaft Double Stage Reduction Horizontal rotating NE23BRN4 N (reducer with series N compact housing solid shaft) E (Size E) 2 (Double Stage Reduction) 3 (with right angle horizontal shafts) BRN (indicates the assembly arrangement shaft arrangement) 4 (nominal ratio) 71 kW n1 750 u/min n2 187,5 u/min

EDM machine - X: 500 mm - Y: 295 mm - Z: 385 mm - C-axis: 360° - Clamping area: 780 x 500 mm - Spacing table - Pinole: 285 - 660 mm - Workpiece weight: 1200 kg - max travel speed X,Y,Z: 600 mm/min - Clamping system: EROWA - C-axis measurement resolution: 0.001° - Electrode changer: 16 -fold - Electrode changer: pick-up - Electrode weight: C-axis 20 kg - max. single electrode weight: 5 kg - Electrode changer total load: 40 kg - Dielectric cooler - Dielectric filter candles: 3 pieces - Dielectric filling height: 345 mm - Dielectric capacity: 450 l - Dielectric aggregate: separate - Generator: 30 A A - Control: EROCOM 200 - Fire extinguishing system - Total power: 8 kW - Machine weight: 4400 kg - Space requirement (W x D x H): 2.2 x 3.3 x 2.4 m - Condition: very good Details tested by Maho technicians, ready for demonstration under electricity, instru ...

X-travel: 300mm, y-travel: 150mm, z-travel: 200mm, table dimensions: 350x450mm, controls: EROPULS 2002, length: 1200mm, width: 1200mm, height: 2000mm, weight: 1.4t, including documentation, without magnet clamping plate.

Controls: Dieter Hansen EROCOM, including documentation and accessories.

Mains voltage: 380V, connected load: 13kW, controls: Heidenhain TNC 125, the machine is in very good condition.

Gearboxes, spur gear units used HANSEN Type: RLF41-BNVH-12 Translation i: 111 Shafts approx. Ø 45 / 165 mm Dimensions: approx. 1200 x 750 x 670 mm Changes and errors in the technical data, information and prices as well as prior sale reserved.

Gearboxes, spur gear units used HANSEN Type: D753CT Translation i: 453 Shafts approx. Ø 38 / 150 mm Dimensions: approx. 1750 x 900 x 800 mm Changes and errors in the technical data, information and prices as well as prior sale reserved.

Gearboxes, spur gear units used HANSEN Type: D743CT3 Translation i: 203 Shafts approx. Ø 50 / 150 mm Dimensions: approx. 1750 x 900 x 800 mm Changes and errors in the technical data, information and prices as well as prior sale reserved.

Winding motor, drum winder for crane, trailing cable motor, gear motor, electric motor -Power: 1.5 Nm -Speed: 0-500 rpm -Shaft: Ø 19 x 30 mm -Construction: B5 -Dimensions: 230/230/H200 mm -Weight: 10.5 kg

Key data: 730 mm, 630 mm, 12 A

Made in Germany X-axis 525 mm Y-axis 400 mm Z-axis 375 mm Dielectric tank 400 L Machine dimension; W 2100 x D 2450 x H 2600 mm Weight: 4800 KG Work table: L 730 x W 630 mm Operating voltage 400 V - 50 Hz Current consumption 12 A Control voltage 230 AC/ 24 DC Back-up fuse: 25 A Moto software is missing Price basis: free loading

Description: Serial number: 60318 Technical data (without guarantee): Table size X x Y: 600 x 400 mm Color path X x Y: 350 x 250 mm Z: 340 mm Workpiece height: max. 240 mm Table quill: max. 520 mm Generator: 20 - 120 A With accessories including EROWA electrode holders (approx. 28 pieces) as shown in the pictures and technical documentation as shown in the pictures weight approx.: 3,900 kg, Approx. Onsite Dimension. (l x w x h): 2,200 x 1,700 x 2,100 mm

Two Gear Motors SEW Eurodrive, Model: V112, 3 Motor, S1-100% ED, SN: E189357 Device in good condition. Please check manufacturer site: Kanitech Machine store in warehouse in Poland , 55-300 Środa Śląska If needed any additional photos or videos or if you are planning visit to check our equipment you are welcome. Possible transport organization, transport cost covered by buyer. Contact person: Michał Pienio Production Manager UAP-2 marketing2.legnicafaurecia.com FAURECIA Legnica Decorations Plant, Interior Systems 180 Gniewomierz 59-241 Legnickie Pole – Poland M +48660719841 Faurecia Legnica Decorations S.A. . with its registered office in Legnica, address: at Gniewomierz 180 street, 59-241 Legnickie Pole, entered into the register of entrepreneurs of the Polish Court Register kept by the District Court for Wrocław-Fabryczna in Wrocław, IX Commer ...

N:18559 Date:27 12 85 Type:RSD 281 ratio: 4.704:1

N: 49351 Type: WAV 550 B building year: 1982 ratio: 5,158:1

Angle geared motor Manufacturer: SEW-Eurodrive Model: W30 DRS71M4/TH Quantity: 2 pcs. Built: 2017 Voltage: 230/400 V Current: 2.70/1.55 A Protection: IP55 Efficiency class: IE1 Standard Efficiency Speed: 1360/207 rpm Frequency: 50 Hz Power: 0.55 kW

SEW Eurodrive SA 77 R 37 Geared Motor Electric Motor Rotary Tom Motor Angular Gear Motor unused ( as good as new ) Type SA 77 R 37 DT 90S4 No 64.1362611.301.0001.1040 -Speed 1400 / 4.3 ipm -Power 1.1 Kw -Design angle -Protection class IP54 -Weight piece 74.8 kg

Geared motor from SEW . As good as new from bearing resolution SA57DT80N4/C Kw 0.75/0.75/S1 1380/42 Type M4A

Helical geared motor / motor Manufacturer: SEW-USOCOME Type: RF57 DT90L4 Quantity in stock: 2 Turnover y/min : 1410/95 Transmission: 15 Power (kW): 1.5 Product Id: 1

Key data: 1 , 95

Używany Motoreduktor walcowy / silnik do remontu. Producent: SEW-USOCOME Typ: RF57 DT90L4 Ilość w magazynie: 2 Obroty r/min : 1410/95 Przekładnia: 15 Moc (kW): 1,5 Dodatkowo na magazynie mamy dostępne inne motoreduktory walcowe i stożkowe. Zapraszamy do współpracy.

Używany Motoreduktor walcowy / silnik do remontu. Producent: SEW-USOCOME Typ: RF57 DT90L4 Ilość w magazynie: 4 Obroty r/min : 1410/25 Przekładnia: 56 Moc (kW): 1,5 Dodatkowo na magazynie mamy dostępne inne motoreduktory walcowe i stożkowe. Zapraszamy do współpracy.

Używany Motoreduktor walcowy / silnik do remontu. Producent: SEW-USOCOME Typ: RF67 DT90L4 Ilość w magazynie: 3 Obroty r/min : 1410/79 Przekładnia: 18 Moc (kW): 1,5 Dodatkowo na magazynie mamy dostępne inne motoreduktory walcowe i stożkowe. Zapraszamy do współpracy.

No. 4700: 1 gebr. Flat gear motor / gear motor n 155 min-1 / max. 2454 Nm / i = 9.39 / hollow shaft Fabr., NORD / Getriebebau NORD, Type SK 6282 AZ - 180 M / 4 TF H2 Weight approx. 350 kg Drive power: 18.5 kW

Używany Motoreduktor walcowy / silnik do remontu. Producent: SEW-USOCOME Typ: RF67 DT90L4 Ilość w magazynie: 2 Obroty r/min : 1410/60 Przekładnia: 24 Moc (kW): 1,5 Dodatkowo na magazynie mamy dostępne inne motoreduktory walcowe i stożkowe. Zapraszamy do współpracy.

Używany Motoreduktor walcowy / silnik do remontu. Producent: SEW-USOCOME Typ: RF67 DT90L4 Ilość w magazynie: 2 Obroty r/min : 1410/35 Przekładnia: 40 Moc (kW): 1,5 Dodatkowo na magazynie mamy dostępne inne motoreduktory walcowe i stożkowe. Zapraszamy do współpracy.

Używany Motoreduktor walcowy / silnik do remontu. Producent: SEW-USOCOME Typ: RF67 DT90L4 Ilość w magazynie: 2 Obroty r/min : 1380/9,5 Przekładnia: 145 Moc (kW): 0,75 Dodatkowo na magazynie mamy dostępne inne motoreduktory walcowe i stożkowe. Zapraszamy do współpracy.