hamm used for sale

Roll Dia.: 600 mm - Roll Width: 900 mm - With 132 kW Electrical motor and unused spare-parts (Screens, Screenholders and Hammers)

Sell a draft fan R 400 / 51-895 with a Siemens motor 1CV3182A

Manufacturer: Tietjen Type: NDK 5.2-S Year : 2017 Type : Hammer mill Applications : Designed for wet shredding of bulk food and agricultural products, Motor type : hydraulic Frame and rotor in stainless steel 304, 1.4301. Weight (excluding motor): 1250 kg Injection nozzles for liquids Bearing temperature monitoring Pneumatically operated inlet flap

Manufacturer : B?hler Model: MSE 10 Type : hammer mill Year : 1993 Engine : Schorch 110 KW Material : mild steel New paintwork New bearing gaskets New/refurbished screws and bolts Sold with Stolz feed hopper and fan 1 extra set of hammers available

High-pressure pump - see pictures

Hot water high pressure device, 210 bar, 960 L / h, detergent tank, high pressure hose 10 m, gun, double spray Lance.

Screws and small part scoop Brand: Hammer Type: SKP-M-300 Other details: Please see photos All information without guarantee

High-pressure unit Oertzen E 500 - 17, 32 A connection, 500 bar, 1,020 L/h, 10m high-pressure hose, gun, lance, flat jet nozzle, water deficiency protection, water entry filter

Dynajet 500 me , NEW, Operating pressure: 500 bar, Number of foerders: 15 l/min, Drive: electric 15 kW, 400 volts, Engine hours: approx: 1, Trolly, incl. zubehoer,

Operating pressure: 150 bar, Number of foerders: 42 l/min, Drive: electric 15 kW, 400 volts, Engine hours: approx: 1, Trolly, incl. zubehoer,

Concrete removal robots for horizontal flat milling Consisting of: Robot base suspension, with modular system up to 8 m, with integrated hydraulic system, with control unit (control bottle) with working device and attached lance console and jet lance 700mm electric motor

Operating pressure: 1000 bar, Number of foerders: 17 l/min, Drive: electric 35 kW, 400 volts, 63 A, Engine hours: approx: 2 h, Trolly, incl. pistol, 10 m HD hose, 15° flat jet dues,

Operating pressure: 350 bar, Flow rate: 21 l/min, Engine: Vanguard 2-cylinder, 4-stroke gasoline engine Working hours: 2h

The press brake HAMMERLE BM 200-3100 press brake was built in 1996. The folding machine was serviced regularly. Technical parameters of the press: - control: INFINITRON - number of NC axes: 11 - pressure: 200 tons - bending length: 3100 mm - working stroke: 400 mm - distance between the body walls: 3240 mm - maximum distance between the table and the bumper: 965 mm - voltage: 3 x 400 Volt - control voltage: 24 V = - total power: 28 kW - deflection arrow compensation - total machine width: 4400 mm - total height of the press: 3400 mm - weight of the press: 16 600 kg

Stationary high-pressure pump unit Hammelmann HDP 77 on base frame. Similar/no Uraca, Woma, Kamat Pump type: HDP 77 Operating pressure: 490 bar Flow rate: 59 l/min. Drive speed: 1800 RPM Drive power: 65 kW with AC 55 kW 3 motor AH 250 M-4; 400V; 50 Hz Dimensions LxWxH: approx. 1665x1212x1641 mm Weight: approx. 1050 kg Built: 2008 Condition: in very good used condition. Includes complete documentation.

250 ton x 3000mm MASSIVE SPECIFICATION €100,000 EUR Tooling package!

Year of construction 2022 - NEW; with Martin M10 mount, 420 kg net weight, suitable for 6 - 12 t excavators

Stationary high-pressure pump unit Hammelmann HDP 122 on base frame without motor. Similar but no Kamat, Uraca, Woma. Pump type: HDP 112 Operating pressure: 530 bar Flow rate: 55 l / min. Drive speed: 1500 rpm. Drive power: 55 kW without engine, with pressure control valve, Bwfz23o8wi with safety valve, with oil cooling system. Dimensions LxWxH: approx. 2000x1000x1400 mm Weight: approx. 300 kg Year of construction: 1998 Condition: in good used condition.

With magnet

Stationary high-pressure pump unit Hammelmann HDP 122 on base frame. Similar but no Kamat, Uraca, Woma. Pump type: HDP 122 Operating pressure: 440 bar Flow rate: 92 l/min. Drive speed: 1500 rpm. Drive power: 75 kW with AC motors ACM 208S 75 kW electric motor, IP55, with pressure control valve, with safety valve, with oil cooling system. Dimensions LxWxH: approx. 1,800x900x1,450 mm Weight: approx. 1,230 kg Year of construction: 2015 Condition: in very good used condition.

Gripper opening width: 600mm, connected load: 0.1kVA, height: 1900mm.

Stationary high-pressure pump unit Hammelmann HDP 142 on base frame. Similar but no Kamat, Uraca, Woma. Pump type: HDP 142 Operating pressure: 610 bar Flow rate: 78 l/min. Drive speed: 1500 rpm. Drive power: 86 kW with AC M 280 M-4/HE electric motor 90 kW, IP55, with pressure control valve, with safety valve, with oil cooling system. Dimensions LxWxH: approx. 1,700x850x1,450 mm Weight: approx. 1,200 kg Year of construction: 2018 Condition: after service by Hammelmann in October 2020 only a few weeks run and for more than a year out of operation. In very good used condition.

Engine: Diesel engine CAT C9 Power: approx. 261 kW / 350 PS - Waves with 7/7 writing with 5 knives per write (regenerated) - Refractive beam with comb (regenerated) - Chain drive - Discharge belt with discharge height of approx. 3,400 mm - Permanent - Belt magnet with hydraulic height adjustment -Remote control Weight: approx. 24 t regenerated according to HAMMEL standard

Hammer C3 31 Station wagon With format sliding table 2m Saw blade 250-315mm Swivel: 90°-45° Planer width of 310mm 3 automatic blade planing shaft Passage height from 4-225mm Milling machine: 90°-45° swivel backwards Milling machine: 3000/4000/5000/ 6000/8000 and 10000 rpm Height stroke 160mm Motor power: 3 motors 4KW 400V G&2825-O1852

- diesel engine CAT C9, approx. 261 kW / 350 HP - shafts 7/7 discs with 5 knives per discs (reconditioned) - breaker bar with combs (reconditioned) - Hook Lift Frame - wheel axle with drawbar - Permanent obverband magnet - weight approx. 18 t

- electric engine, approx. 2 x 110 kW - shafts 7/7 discs with 5 knives per discs (reconditioned) - breaker bar with combs (reconditioned) - Hook Lift Frame - water sprinkling system - discharge belt with a discharge height approx. 3,400 mm - Remote control - weight approx. 20 t

High Pressure unit Hammelmann HDP 504 Year of construction 2021 Operating pressure 2200 bar Flow rate 122 ltr Power 490 kW Operating hours 880 h engine CAT C 18, Level 5 TIER 4F Power 565 kW in Truck, Used Truck Scania 164 L V8, 480 YoM 2004 Power 353 kW 802,500 km

Cutler Hammer Panel Mate Power Pro PGGLOBL1701DPRO 1785T 91-01759-04 Dimensions approx. 26.5 cm Wide, 19.5 cm high and 10.5 cm deep Shipping : 7,90 with Hermes VAT not deductible

- diesel engine CAT C7.1 Tier 4i - approx. 205 kW / 275 HP - shafts: 7/7 discs with 5 knives per discs and breaker bar with combs (reconditioned) - Mobile Hook Lift Frame - Permanent - Overband magnet - water sprinkling system - Remote control

- diesel engine Cummins B6.7 - Stage5 - approx. 209 kW / 280 HP - shafts: 7/7 discs with 5 knives per discs and breaker bar with combs (reconditioned) - Mobile Hook Lift Frame - Permanent - Overband magnet - water sprinkling system - Remote control - weight approx. 24 t

Brand: MUTTON, Model: VB750 E, Serial No.: 110/620, Year of construction: 2007, Drive: 2 x 110kW, Speed: approx. 1800 minutes, Working shafts:, Rotor diameter: approx. 670mm, Design: 5-piece 7/7 discs, Shaft length: 1800mm, Dimensions:, Height: 2700mm, Width: 2500mm, Length with belt: 9710 mm, Belt width: 1400 mm, Belt length: 14400 mm, Radio control: Hetronic GA609, Weight: 20 tons., Terms of delivery: EXW Germany, fire: MUTTON, model: VB750 E, Serial No.: 110/620, Year of construction: 2007, Drive: 2 x 110 kW, speed: approx. 1800 minutes, Rotor diameter: approx. 670mm, design: 5-piece 7/7 discs, Shaft length: 1800 mm, Height: 2700 mm, Width: 2500 mm, Length with belt: 9710 mm, Belt width: 1400 mm, Belt length: 14400 mm, Radio control: Hetronic GA609, Weight: 20 tons, Terms of delivery: EXW Germany

NEW - year of construction 2022, with Lehnhoff MS01 mount, incl. 1 chisel, 105 kg own weight, suitable for 1 - 2.5 t excavators

Used machine, Woma 400 Z Operating pressure: 1300 bar, Flow rate: 146 l/min, Powertrain: Volvo Operating hours: approx: 4150 h, Year of construction 2002 in truck Iveco Stralis 560 Power 560 hp Year of construction 2011 KM 144.000

Stationary high-pressure pump unit Hammelmann HDP 77 on base frame. Similar but no Kamat, Uraca, Woma. Pump Type: HDP 77 Operating pressure: 330 bar Flow rate: 59 l/min. Drive speed: 1500 rpm. Drive power: 37 kW with Siemens 1LA6223-4AA60 electric motor 45 kW with pressure regulating valve, Fzhoqck with safety valve, with oil cooling system. Dimensions LxWxH: approx. 1,450x750x1,150 mm Weight: approx. 600 kg Year of construction: 2019 Condition: In good used condition.

Karges Hammer can seamer, machine number: 77935, maximum can diameter: 110 mm, total dimensions: 1500 mm x 1100 mm x 2100 mm.

I sell a vertical band saw fields hammer N4400. Motor power 3.0KW Suitable for saw blades up to 35mm Swivel table. Year of construction 2009 Condition as good as new. Available soon.

for 5 - 12 t excavator, 480 kg net weight, 25 l/min excavator oil flow capacity, 360° rotation,

for 5 - 12 t excavator, 480 kg net weight, 25 l/min excavator oil flow capacity, 360° rotation,

- Mutton NZ 700 E - Year of construction 2007 - incl. magnet - Incl. all-metal detector and ejection - Incl. feed belt and discharge belt - good condition

Hammelmann Pump HDP 503, NEW Operating pressure 1600 bar, Flow rate 166 l/min Revolutions 1800 1/min

- Hand & foot control - integrated ambos - solid substructure Specifications: - Hammer weight: 40 kg - Lifting height: 230 mm - Projection: 240 mm - Cylinder Ø: 140 mm - Motor power: 4 kW - Voltage: 400 V - Dimensions WxHxD: 700 x 1900 x 1200 mm - Weight: approx. 900 kg

Hammer mill Manufacturer: NEUE HERBOLD Type HM 450/300 Working width: 300 mm Rotor width: 450 mm Drive: 18.5 kW -NEW MACHINE- size reduction of brittle plastics like electronic scrap, wood scrap, and organic insulation material.

Hello, I have a chipper for sale with a 6-cylinder John Deere engine, about 250 HP The chipper, despite its age and appearance, is fully operational. Its strong advantage is its very simple structure. It does not require a complicated service for simple repairs. The same applies to the operation, which is very intuitive. A chipper for a wide variety of needs: - Various types of wood waste - The cuts - Pallets - The bark - blocks, waste - and many others Capacity about 80 m3 / h depending on the material, operator efficiency, type of material and sieves It is possible to install different sizes of screens depending on the needs The wide charging with dimensions of 4.10m x 1.90m allows you to backfill even with very large loaders The working width of the roller is 1.45 m and the sieves have a mesh size of 8 cm x 8 cm. Chippers of this type and power, regardless of age, kee ...

This is a Hammer Mill from Nuova Guseo Italy in great working condition. This Griding Machine, has been recently been refurbished and works perfectly for many applications. 15kw Motor 9 X 4rows = 36pieces of hammers with 6mm thickness Hammers can be turned and used 4 times to all 4 sides Amperage indication on the panel 10 different sieves (9 in the photos one is installed) with diameter Φ1.5mm, Φ2mm, Φ8mm, Φ15mm, Φ16mm, Φ22mm, Φ25mm, 2pcs X Φ30mm. HAMMER MILL – SERIES RAPIDE Between all size reduction equipment, hammer mills are more widely used than any other to grind minerals and fodder. Now thanks to some special features of the mills series RP, they can be used in foodstuffs and chemicals industries too. Of simple, yet robust design, the hammer mills are suitable to meet the most medium size reduction requirements. They can be used to mill various mater ...

General SKU282U515 LocationBarneveld MakeAlpine Augsburg TypeB500 Main Features Inlet diameter120 mm Width460 mm Specified Features - Hammer Mill MaterialSilicon steel 1.5023, Mild steel Hammer Mills Hammer millcheck Rotor sizeDia: 395x170mm Grinding room sizeDia: 460x200mm Moving hammerscheck Hammer width170mm Housing dimensions 800x300mm Inlet170x100mm Without motorcheck Information Year of constructionunknown Floor space1x0,85m Total height0,77m Weight400kgHammer MillsHosokawa AlpineMills > Hammer MillsBrand > Hosokawa Alpine What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU391T1170 LocationBarneveld MakeA. Smits constructies BV TypeSmimo-MI-100L No.010.00.01.001 Main Features Motor7.5 KW Inlet diameter70 mm Width240 mm Specified Features - Hammer Mill MaterialStainless steel 1.4301 (304), Stainless steel 1.4306 (304L) Hammer Mills Hammer millcheck Rotor sizeDia: 240x100mm Grinding room sizeDia: 320x105mm Moving hammerscheck Hammer width4mm With sieve cagecheck 2x (ø 10 mm : 8 x8 mm) Housing dimensions Dia: 325x400mm InletDia: 70mm Motor7,5kW, 400/600Volt Speed1445rpm Information Year of construction1999 Mounted on framecheck With switchcheck With switchgearcheck Floor space2,1 x 0,55 m Total height1,2 m Weight350 kgHammer MillsOther feedA.Smits constructiesMills > Hammer MillsIndustries > Food & Feed > Other feedBrand > A.Smits constructies What you can expect from Foeth: -- Machine is in working condition -- At a ...

General SKU027E101 LocationBarneveld MakeApex Construction Ltd. Type114 DW-SF No.A-40880 Year of constructionunknown Main Features Motor22 KW Inlet diameter260 mm Width295 mm Specified Features - Hammer Mill Materialstainless steel 1.4721(heat resistant), Stainless steel 1.4306 (304L) Hammer Mills Hammer millComminuting mill (1x) Rotor sizedia. 260x295mm Fixed hammerscheck With sieve cagecheck Inlet/feeding through twin screw metering screw Motor22,0/30,0 KW, 380/660 Volt, 1470rpm Speed750rpm Information Mounted on framecheck Mounted on wheelscheck With switchcheck Floorspace2,0x1,3 M Floor space2,0x1,3 m Total height2,4 M Weight900 KG Extra SpecificationsDosing screw Motor 0.55 kW Gearbox output 5.7 - 34 rpm (manual variator) Dosing screw capacity: maximum 4.5 m3/h Sieve cages: 3 pieces ( 2 x pore size 1.25 mm: 1 x 1.75 mm) Hammer MillsApexMills > Hammer Mi ...

General SKU050A273 LocationBarneveld MakeHosokawa Micron Europe TypeG-1030 No.97100003.03 Year of construction1990 Main Features Motor7.5 KW Inlet diameter260 mm Specified Features - Hammer Mill MaterialMild steel Hammer Mills GrinderVictory mill (1x) Rotor sizedia. 260mm With sieve cagecheck With grinding trackcheck Motor7,5 KW, 380 Volt Information Mounted on framecheck With switchgearcheck Floorspace1,2x0,9 M Total height1,6 MHammer MillsHosokawa MicronMills > Hammer MillsBrand > Hosokawa Micron What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!