used HUVEMA Band Saws

cutting diameter: 360 mm saw band length: 5000 x 34 x 1,1 mm cutting width: 640 mm cutting capacity - flat: 510 x 360 / 30° mm cutting capacity - round: 360 / 30° mm cutting capacity - square: 360 x 360 / 30° mm cutting capacity - flat: 390 x 360 /45° mm cutting capacity - round: 310 /45° mm cutting capacity - square: 360 x 360 / 45° mm cutting capacity - flat: 250 x 360 /60° mm cutting capacity - round: 310 / 60° mm cutting capacity - square: 270 x 270 / 60° mm cutting capacity - flat: 640 x 360 / 90° mm cutting capacity - round: 360 / 90° mm cutting capacity - square: 360 x 360 / 90° mm speed: 20 - 100 m/min sawing motor: 3 kW hydraulic motor: 1,1 kW coolant pump: 0,12 kW voltage: 400 V / 50 Hz total power requirement: 4,3 kW weight of the machine ca.: 1630 kg dimensions of the machine ca.: 3000 x 1200 x 2000 mm Accessories: • Inverter • hydraulical vice • automatical ...

cutting diameter: 320 mm saw band length: 3660x27x0,9 mm cutting width: 400 mm cutting capacity - flat: 400 x 220 / 90° mm cutting capacity - round: 320 /90° mm speed: 20 - 100 m/min cutting capacity - flat: 280 x 200 / 45° mm cutting capacity - round: 280 / 45° mm sawing motor: 1,5 kW hydraulic motor: 0,37 kW coolant pump: 0,12 kW total power requirement: 2 kW weight of the machine ca.: 670 kg dimensions of the machine ca.: 1800 x 850 x 1200 mm Accessories: • Inverter • hydraulical vice • automatical movement to the top via hydraulical cylinder. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 380 mm saw band length: 5000x34x1,1 mm cutting width: 520 mm cutting capacity - flat: 520 x 350 / 90° mm cutting capacity - round: 380 /90° mm speed: 20 - 85 m/min sawing motor: 2,2 kW total power requirement: 3,1 kW weight of the machine ca.: 1200 kg dimensions of the machine ca.: 1800 x 850 x 1200 mm Accessories: • Inverter • hydraulical vice • automatical movement to the top via hydraulical cylinder. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 325 mm saw band length: 4380x34x1,1 mm cutting width: 450 mm cutting capacity - flat: 450 x 325 / 90° mm cutting capacity - round: 325 /90° mm speed: 20 - 100 m/min sawing motor: 2,2 kW total power requirement: 3 kW weight of the machine ca.: 1010 kg dimensions of the machine ca.: 2100 x 860 x 1500 mm Accessories: • Inverter • hydraulical vice • automatical movement to the top via hydraulical cylinder. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 360 mm saw band length: 5200 x 34 x 1,1 mm cutting width: 700 mm cutting capacity - flat: 590 x 360 /30° mm cutting capacity - round: 360 / 30° mm cutting capacity - square: 360 x 360 / 30° mm cutting capacity - flat: 460 x 360 /45° mm cutting capacity - round: 360 /45° mm cutting capacity - square: 360 x 360 / 45° mm cutting capacity - flat: 305 x 360 /60° mm cutting capacity - round: 360 / 60° mm cutting capacity - square: 305 x 360 / 60° mm cutting capacity - flat: 700 x 360 / 90° mm cutting capacity - round: 360 / 90° mm cutting capacity - square: 360 x 360 / 90° mm speed: 20 - 100 m/min sawing motor: 3 kW hydraulic motor: 0,55 kW coolant pump: 0,12 kW voltage: 400 V / 50 Hz total power requirement: 3,7 kW weight of the machine ca.: 1460 kg dimensions of the machine ca.: 2850 x 1000 x 1850 mm Accessories: • Inverter • hydraulical vice • automatical ...

cutting diameter: 280 mm saw band length: 3400 x 27 mm cutting width: 0,9 mm capacity 45 degrees: flat: 240 x 180 mm capacity 45 degrees: round: 240 mm capacity 45 degrees: square: 210 mm driver:manufacturer: 350 x 200 capacity 90 degrees: square: 280 mm speeds: 20 - 100 m/min voltage: 400 V / 50 Hz sawing motor: 1,5 kW total power requirement: 2 kW weight of the machine ca.: 0,7 t dimensions of the machine ca.: 1,8 x 0,9 x 1,3 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 460 mm saw band length: 5200 x 41 x 1,3 mm cutting width: 460 mm cutting capacity - flat: 470 x 460 / 90° mm cutting capacity - round: 460 / 90° mm speed: 20 - 100 m/min voltage: 400 V / 50 Hz sawing motor: 4 kW total power requirement: 4,7 kW weight of the machine ca.: 1,665 t dimensions of the machine ca.: 2100 x 1300 x 850 m full-automatical band saw, Accessories: • Inverter for controllable speed, • automatical stop function after sawing and on breakage of the saw blade, • automatical saw arm lifting, • hydro-mechanical clamping of the saw blade, • material clamping to be effected from above, hydraulical vice, • switch for cutting pressure control, • coolant pump, • roller conveyor, length: 1.2 m. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 170 mm saw band length: 2035 x 20 x 0,9 mm cutting width: 130 mm cutting speed: 30 80 m/min : 130 mm : 130 x 130 mm capacity 60 degrees: round: 75 mm capacity 60 degrees: square: 75 x 75 mm : 170 mm : 166 x 166 mm weight of the machine ca.: 184 kg Compact band saw with variable speed. Including stand and cooling system. No slack due to special construction and rigid saw arm. Adjustable blade tension. Features: ?supplied with bi-metal saw blade material stop The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 170 mm saw band length: 2085 x 20 x 0,9 mm cutting width: 180 mm cutting speed: 35 - 70 m/min : 110 mm : 90 x 90 mm capacity 60 degrees: round: 70 mm capacity 60 degrees: square: 70 x 70 mm : 185 mm : 180 x 180 mm drive capacity - workpiece: 0,75 kW range L-W-H: 1000 x 600 x 1500 mm weight of the machine ca.: 195 kg Sawing machine with base, European design. This machine is used for making small cuts. The saw blade tension can be adjusted manually. Quick-acting clamp. No vibrations due to heavy duty saw arm. The machine has a 2-speed motor, saw blade guide bearings. The sawing pressure can be adjusted through a hydraulic cylinder. Features: adjustable sawing pressure automatic stop with cooling system eccentric quick-acting clamp separate metal control panel 2-speed motor precision adjustment of the runners with material stop switch controlled saw blade cover gear whee ...

cutting diameter: 810 mm saw band length: 9500 x 54 x 1,6 mm cutting width: 1020 mm cutting capacity - flat: 1020 x 1020 mm cutting capacity - round: 1020 mm speed: 20 - 100 m/min sawing motor: 4 kW hydraulic motor: 2,2 kW total power requirement: 7,5 kW weight of the machine ca.: 5860 kg dimensions of the machine ca.: 4500 x 1700 x 2750 mm Accessories: • Inverter • hydraulical vice • automatical movement to the top via hydraulical cylinder. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: M3-M16 Weight: 27 kg working range: 200-1900 mm turning speeds: 300 U/min The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Weight: 27 kg : M3-M20 working range: 200-1900 mm turning speeds: 150/400 U/min The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 310 mm turning diameter over slide rest: 178 mm turning length: 910 mm turning dia. in gap: 420 mm spindle turning speed range: 70 - 2000 U/min spindle bore: 38 mm number of feeds: 18 Stk feed range: 0,052 - 1,392 mm/U metrical thread cutting: 0,4 - 7 mm voltage: 230 / 50 V Hz total power requirement: 1,1 kW weight of the machine ca.: 0,45 t dimensions of the machine ca.: 1,6 x 0,8 x 1,4 m • incl. 3 and 4 jaw chuck • fixed and followed steadies • reducing bush MK4 - MK3 • 2 fixed lathe centers • 1 Set of changing wheels • coolant device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1020 mm plate thickness: 2 mm distance between columns: 1020 mm bending angle max.: 135 ° total power requirement: 0 kW weight of the machine ca.: 0,3 t dimensions of the machine ca.: 1350 x 850 x 1175 m • maximum bending angle 135° • hand-operated The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Sägeblatt-Ø: 315 mm cutting diameter: 90 mm sawblade width: 2,5 mm capacity 90 degrees: round: 90 mm capacity 90 degrees: flat: 120 x 70 mm capacity 45 degrees: round: 80 mm capacity 45 degrees: flat: 80 x 70 mm turning speeds: 52 -104 U/min voltage: 400 V frequency: 50 Hz power capacity: 1,32 -1,9 kW weight of the machine ca.: 220 Kg range L-W-H: 0,7 x 0,6 x 1,3, m • mitre possibility by adjustment of the sawhead, • self-scrolled vise, self-ajdustable protection cover, • cooling pump with bin, • 2 steps of cutting speed • with under frame The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 500 x 50 mm cutting diameter: 180 mm turning speeds: 3000 U/min capacity 90 degrees: round: 180 mm capacity 45 degrees: round: 180 mm capacity 90 degrees: square: 150 x 150 mm capacity 45 degrees: square: 120 x 120 mm capacity 90 degrees: flat: 300 x 125 mm capacity 45 degrees: flat: 145 x 120 mm voltage: 400 V / 50 Hz total power requirement: 4 kW weight of the machine ca.: 430 Kg dimensions of the machine ca.: 0,8 x 0,7 x 1,3 m • Cold circular saw for aluminium, • with pneumatical double clamping of the workpiece, • clamping is adjustable horizontally and vertically, • equipped with mist lubrication, • adjustable saw blade feed, • additional roller conveyor: Height = 850 - 1200 mm, Width = 250 mm, Length = 1000 mm, with 4 posts The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

thread dia.: 12 mm threading length: 20 mm turning speeds: 400 U/min working area: 500 - 1600 mm weight of the machine ca.: 25 Kg dimensions of the machine ca.: m • pneumatical thread cutting device, M3 - M12, • with 6 adapters of thread cuttings, Size 1, • control valve with lubrication, • order no. 31681, The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 460 mm turning diameter over slide rest: 274 mm turning length: 1000 mm spindle bore: 58 mm spindle turning speed range: 25 - 2000 U/min turning dia. in gap: 690 mm metric threading: 41 / 0,1 - 14 mm thread - inch: 60 / 2 - 112 inch. thread - module: 34 / 0,1 - 7 mm Whitworth-thread: 60 / 2 - 112 TPI adjustment of the upper slide: 140 mm dia. of quill: 60 mm quill stroke: 120 mm total power requirement: 5,5 kW weight of the machine ca.: 1,7 / 2,0 t dimensions of the machine ca.: 2,2 x 1,0 x 1,3 m A comprehensive range of quality centre lathes characterised by wide versatility,high accuracy and extremely rigid construction. The machines are well equipped with a multi-fix quick change tool post and 2-axis Newall digital readout fitted as standard and a variable speed option is available. Huvema lathes fully conform to CE regulations. Also available in: 1,5m 3 ja ...

saw blade diameter: 500 x 50 mm cutting diameter: 170 mm turning speeds: 3000 U/min reus: variabel einstellbar U/min capacity 90 degrees: round: 170 mm capacity 45 degrees: round: 140 mm capacity 90 degrees: square: 150 mm capacity 45 degrees: square: 120 mm capacity 90 degrees: flat: 300 x 125 mm capacity 45 degrees: flat: 145 x 120 mm voltage: 400 V / 50 Hz total power requirement: 4 kW weight of the machine ca.: 500 Kg dimensions of the machine ca.: 0,8 x 0,7 x 1,3 m • Cold circular saw for aluminium, • with pneumatical double clamping of the workpiece, • clamping is adjustable horizontally and vertically, • equipped with mist lubrication, • adjustable saw blade feed, • additional roller conveyor: Height = 850 - 1200 mm, Width = 250 mm, Length = 1000 mm, with 4 posts The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1500 mm plate thickness: 1,5 mm distance between columns: 1500 mm bending angle max.: 135 ° total power requirement: - kW weight of the machine ca.: 0,36 t dimensions of the machine ca.: 1,7 x 0,7 x 1,3 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 460 mm turning diameter over slide rest: 274 mm turning length: 1000 mm turning dia. in gap: 690 mm spindle bore: 58 mm spindle turning speed range: 25-2000 U/min feeds - longitudinal: 0,031-1,7 mm/U voltage: 400 V / 50 Hz total power requirement: 5,5 kW weight of the machine ca.: 1,8 t dimensions of the machine ca.: 2,3 x 1,0 x 1,5 m • with 3- and 4- jaw chuck, • 2 axis-digital display NEWALL, • fixed and live steady, • Machine light. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 460 mm turning diameter over slide rest: 274 mm turning length: 1500 mm spindle bore: 58 mm spindle turning speed range: 25 - 2000 U/min turning dia. in gap: 690 mm metric threading: 41 / 0,1 - 14 mm thread - inch: 60 / 2 - 112 inch. thread - module: 34 / 0,1 - 7 mm Whitworth-thread: 60 / 2 - 112 TPI adjustment of the upper slide: 140 mm dia. of quill: 60 mm quill stroke: 120 mm total power requirement: 5,5 kW weight of the machine ca.: 1,7 / 2,0 t dimensions of the machine ca.: 2,2 x 1,0 x 1,3 m A comprehensive range of quality centre lathes characterised by wide versatility,high accuracy and extremely rigid construction. The machines are well equipped with a multi-fix quick change tool post and 2-axis Newall digital readout fitted as standard and a variable speed option is available. Huvema lathes fully conform to CE regulations. Also available in: 1,5m 3 ja ...

angle steel/side length: 50 x 50 x 5 mm round steel bars: 30 mm U-iron on the x-axis: 60 x 40 x 6 mm roll diameter - bore: 40 mm roll diameter -toolpieces: 118 - 148 mm turning speeds: 9,3 U/min voltage: 400 V / 50 Hz total power requirement: 1,5 kW weight of the machine ca.: 0,425 t dimensions of the machine ca.: 1,5 x 0,8 x 0,8 m • Machine has got a standard roller set for profiles: flat upright 50 x 10, flat 50 x 15, upright 30, square tube 50 x 50 x 2,5, retangular tube 50 x 25 x 2,5. further roller sets optionally: for exampel: 1 set (6 rolls) for round pipe D = 3/8 + D = 3/4, Surcharge for each extra roller set: € 440,-/set Machine in unused condition. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 400 x 50 mm cutting diameter: 130 mm turning speeds: 3000 U/min reus: variabel einstellbar U/min capacity 90 degrees: round: 130 mm capacity 45 degrees: round: 115 mm capacity 90 degrees: square: 110 x 110 mm capacity 45 degrees: square: 100 x 100 mm capacity 90 degrees: flat: 250 x 85 mm capacity 45 degrees: flat: 160 x 70 mm voltage: 400 V / 50 Hz total power requirement: 3 kW weight of the machine ca.: 380 Kg dimensions of the machine ca.: 0,8 x 0,7 x 1,3 m • Cold circular saw for aluminium, • with pneumatical double clamping of the workpiece, • clamping is adjustable horizontally and vertically, • equipped with mist lubrication, • adjustable saw blade feed, • additional roller conveyor: Height = 850 - 1200 mm, Width = 250 mm, Length = 1000 mm, with 4 posts, Price: € 290.00 The data for this ad was created with ModulMWS - the software solution of  ...

Sägeblatt-Ø: 315 mm cutting diameter: 100 mm sawblade width: 2,5 mm capacity 90 degrees: round: 100 mm capacity 90 degrees: flat: 130 x 90 mm capacity 45 degrees: round: 100 mm capacity 45 degrees: flat: 100 x 90 mm turning speeds: 18 + 36 U/min voltage: 400 V frequency: 50 Hz power capacity: 0,75 - 1,3 kW weight of the machine ca.: 220 Kg range L-W-H: 0,7 x 0,6 x 1,3, m • mitre possibility by adjustment of the sawhead, • self-scrolled vise, self-ajdustable protection cover, • cooling pump with bin, • 2 steps of cutting speed • with under frame The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.