used HURCO Numerically Controlled Machining Centres

Machine Details Stock No. 1105-03273 Type of machine Machining Center - Vertical Make HURCO Type VMX 42 M 2008 Year of Manufacture Type of control CNC Storage location FRANCE Country of origin taiwan Delivery time immediately Freight basis ex work Technical details x-travel 1060 mm y-travel 610 mm z-travel 610 mm work surface 1200 X 610 mm engine output (30 min. ED) 15 kW Distance between table and spindle 150 - 760 mm Torque 600 Nm rpm 30 min ED 22 Control Ultimax 4 weight of the machine about 6 t Additional information ultimax 4 8000 rpm

Vertical CNC machining center Manufacturer Hurco Type VMX 50 Control Ultimax ( all options unlocked ) Year of construction 2006 24 compartment tool changer spindle speed 10,000 rpm Tool holder SK40 IKZ internal coolant supply Travel X/Y/Z 1270/660/610 Conveyor Machine is in a used 100% functional condition.

Vertical CNC machining center Manufacturer Hurco Type VMX 30 Ultimax Control Year of construction 2008 spindle speed 10,000 rpm Chip conveyors Travel X/Y/Z 760/510/610 24 compartment tool changer All control options unlocked Machine is in good condition Delivery not yet known because new machine is only being ordered

Machine Details Stock number 1105-037895 Machine type machining center - vertical Brand HURCO Type VMX 40 Year of construction 2000 Control type CNC Storage location FRANCE Country of origin taiwan Delivery time immediately Freight base from site Technical details x-travel 1060 mm y-travel 508 mm z-travel 650 mm Working surface 1200 X 610 mm Motor power (30 min. ED) 15 kW Distance between table and spindle 150 - 760 mm Torque 600 Nm rpm 30 min ED 22 Tool changer 30 times Ultimax 4 Control Machine weight ca. 6 t Information HURCO VMX 40 BORN 2004 CNC ULTIMAX 4 Synchronous.Thread 8000 rpm SPAENEFOERDEREr

Year: 2011 Travel X-axis: 2032 mm Y-axis: 660 mm Z-axis: 610 mm Spindle speed: 12,000 rpm with internal cooling Power: 18 kW Tool holder: SK 40 40 tool slots Table load: 2,700 kg Machine weight: 18,000 kg Machine hours: 11,417 hrs. Spindle hours: approx. 5,000 hours (maximum) Spindle change in 2020 - Subject to technical errors and prior sale. -

Inv. Num. : 4427 Type: WMX 60i Producer: HURCO Created: 2017 Parameters: Control system: WINMAX Switch-on hours: 5648 h Operating hours: 1554 h Working table length: 1 680 mm Working table width: 660 mm Maximum table load (uniform): 1 360 kg Spindle drive power: 18 kW Maximum vertical spindle speed: 12 000 1/min X-axis travel: 1560 mm Y-axis travel: 660 mm Cone: SK40 Number of all tools: 30 pieces Maximum tool length: 300 mm Maximum tool weight: 15 kg Machine weight: 9 000 kg

Key data: 760 mm, 510 mm, 610 mm

For sale Hurco vertical machining center type VMX-30 rental of an Ultimax 4 controller. Table size 1020 x 510 mm. Maximum speed is 10.000 rpm. The machining center has a tool changer with 24 positions, BT-40 spindle holder, cooling by spindle, chip conveyor, etc. All books are available, available at short notice, subject to prior sale. Other data; x-travel: 760 mm Y-travel: 510 mm z-travel: 610 mm Table surface: 1020 x 510 mm Workpiece weight max.: 1000 kg Spindle speeds: 10 - 10,000 rpm Spindle holder ISO: 40 Rapid traverse in X-Y-Z axis: 30/30/20 Feed speed: 1 -10000 mm/min Total power requirement: 18 kW Machine weight approx.: 5 t Approx. space: 4 x 4.2 x 2.8 m

Key data: 1270 mm, 508 mm, 508 mm

Tech.Data-Tech. Data X/Y/Z-AXIS-X/Y/Z-axis mm 1270x508x508 Table Size mm 1320x610 Milling Head BT 40, 10000 rpm CNC Control-CNC Control WinMax WZ Changer Tool Changer 20 If you are interested in this machine, please contact us, we will be happy to send you a detailed offer If you are interested in this machine, please contact us and we will be pleased to send you a detailed offer

Key data: 533 mm, 406 mm, 483 mm

Tech.Data-Tech. Data X/Y/Z-AXIS-X/Y/Z-axis mm 533x406x483 4th/5th axis-4th/5th. Axis A-axis/A-axis : 30/110° C-axis/C-axis :360° Clamping table size mm 198 mm Milling head BT 40, 10000 rpm CNC Control-CNC Control WinMax WZ changer tool changer 20 If you are interested in this machine, please contact us, we will be happy to send you a detailed offer If you are interested in this machine, please contact us and we will be pleased to send you a detailed offer

CNC 5-axes Universal Machining Center HURCO mod. VTX U Manufacturer: HURCO Type: VTX U YOM: 2005 Control: Ultimax 4 X-axis travel: 800 mm Y-axis travel: 700 mm Z-axis travel: 510 mm C-axis: 360° A-axis: -30°/+110° Spindle speed: 12.000 rpm Spindle motor power: 18 kW Spindle taper: BT 40 Distance between spindle and table: 660 mm Max weight loadable: 260 kg Cooling tank capacity: 380 l Tool magazine stations: 32 Electric connection: 380 V Dimensions (LxWxH): 3720x2700x2900 mm Weight: 13.200 kg

Inv. Num. : 6594 Type: VMX 42 SR Producer: Hurco Generated: 2008 Parameters: Control system: Winmax Work table length: 1270 mm Work table width: 610 mm Maximum table load (even): 500 kg Speed: 12000 1/min Travel X-axis: 1066 mm Travel Y-axis: 610 mm Travel Z-axis: 610 mm Cone: SK40 Machine weight: 7550 kg Equipment: C-axis: CNC rotary table B-axis 2016: new spindle

Table length: 1220 mm Table width: 510 mm Longitudinal X: 1020 mm Cross Y: 510 mm Vertical Z: 610 mm Positions ATC: 20   Positions APC: 0   CNC Brand: _Unknown / Other CNC Model: Ultimax MACH-id     6031 MAKE         HURCO TYPE           BMC 4020 YOP             2000 SPECIFICATIONS X - Travel        1020 mm Y - Travel          510 mm Z - Travel           610 mm Table Length        1220 mm Table Width           510 mm Table load             683 Kg Feed rate X-Axis          20.000 mm/min. Feed rate Y-Axis           20.000 mm/min. Feed rate Z-Axis ...

HURCO VM10 Vertical Machining Centre. Hurco WINMax Control Year of construction: 2010 Manufacturer: Hurco Model: VM10 Control: Hurco WINMAX Spindle Speed: 10000rpm Table size: 762 x 356 mm Tool change capacity: 20 Tool size: DIN40 Traverses XYZ: 560 x 356 x 457mm

x-travel: 762 mm y-travel: 560 mm z-travel: 1020 mm control: Ultimax III taper ISO: 40 Table dimensions: 1300 x 700 mm work piece spindle speed: 30 - 4000 U/min voltage: 380 V total power requirement: 7,5 - 5,5 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1000 mm y-travel: 300 mm z-travel: 400 mm Control: Siemens type: 810 Tools changer for 12 tools: tool taper: ISO 40 total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Table length: 1220 mm Table width: 510 mm Longitudinal X: 1020 mm Cross Y: 510 mm Vertical Z: 610 mm Positions ATC: 24   Positions APC: 0   CNC Brand: Hurco MACH-id    5408 MAKE         HURCO TYPE           BMC 4020 HT YOP             1996 SPECIFICATIONS X - Travel       1020 mm Y - Travel         510 mm Z - Travel         610 mm Table Length     1220 mm Table Width        510 mm Table load         700 Kg Feed rate X-Axis       10.000 mm/min. Feed rate Y-Axis         10.000 mm/min. Feed rate Z-Axis          10.000 mm/min. Spindle Taper        ...

Table length: 1020 mm Table width: 400 mm Longitudinal X: 760 mm Cross Y: 460 mm Vertical Z: 610 mm Positions ATC: 24   Positions APC: 0   CNC Brand: Hurco MACH-id   5407 MAKE       HURCO TYPE         BMC 30 YOP          1997 SPECIFICATIONS X - Travel       760 mm Y - Travel       460 mm Z - Travel        610 mm Table Length      1020 mm Table Width        400 mm Table load            700 Kg Feed rate X-Axis      10.000 mm/min. Feed rate  Y-Axis      10.000 mm/min. Feed rate Z-Axis        10.000 mm/min. Spindle Taper        40 ISO/Bt/Mk Power on spindle        ...

Max. load: 500kg, feed rate: 3-7600mm/min, rotational speed: 80-8000/min, length: 4000mm, width: 3776mm, height: 2692mm, weight: 4.15t.

Table length: 1500 mm Table width: 660 mm Longitudinal X: 1270 mm Cross Y: 660 mm Vertical Z: 610 mm Positions ATC: 24   Positions APC: 3   CNC Brand: _Unknown / Other CNC Model: Ulitmax 4 MACH-id   4089 MAKE       HURCO TYPE         VMX 50 S YEAR        2002 SPECIFICATIONS X - Travel      1270 mm Y - Travel        660 mm Z - Travel         610 mm bed / plano / portal / moving column     VMC Controll       Ultimax 4 Table Length x Width       1500 x 660 mm Table load in kG       1350 Kg Spindle Taper       Sk 40 kW power on spindle     18 kW Spindle speeds / ranges     15000 Rpm ATC tool changer&nbs ...

Table length: 1020 mm Table width: 400 mm Longitudinal X: 760 mm Cross Y: 460 mm Vertical Z: 610 mm Positions ATC: 0   Positions APC: 0   CNC Brand: _Unknown / Other CNC Model: Ultimax Make Hurco BMC 30 HT Type BMC 30 HT Year 1996 Ultimax Table length (mm)L = 1.020 Table width (mm)W = 400 Longitudinal X (mm)X = 760 Cross Y (mm)Y = 460 Vertical Z (mm)Z = 610 Sk 40 / 8000 / 11 kW Optional Nikken 4e axis  

The Hurco VMX 60i is constructed from a heavy-duty ribbed frame made of fine-grained, high-quality cast iron. Double nut ball screws, pre-tensioned, are secured at both ends for increased precision and rigidity. The double-wound spindle provides the required cutting power. Optimum machine performance is dependent on site installation conditions such as power supply, air supply and ambient air. Information subject to change without notice. Additional features help increase productivity. An efficient closed cooling system ensures reliable cooling of the tool. Machining center: 4-axis, pictured manual (not for sale)

2 pieces are available CNC axis: 3 Manufacturer: HURCO BMC 2416 Controls: Ultimax 4 Table size: 760x400mm X-Y-Z: 610 x 406 x 509mm Spindle: 80-8000 rpm Tool taper: SK 40 ATC: 24, vertical

HURCO VMX 50 machining center. Year 2003, 20.000 hours of use. Used for the manufacture of aluminum molds in a small company. Programming with Mastercam and on machine with both conversational and ISO system. Traverses of 1.200 x 600 x 600. 24 tool changer Touch screens, keyboard and mouse. Connectivity through 31/2 floppy disk drive and RS-232 ports. 16 GB hard disk Both external and internal cooling. 10.000 RPM/Max BT-40 New head and axles skids Perfectly maintained. All documentation is provided since purchase. Not in disuse. It is sold due to cease of business. It is started at least weekly. It can be seen and tested perfectly.

Control Hurco MAX control Maximum workpiece weight 545kg Table Size 1168mm x 457mm Traverses XYZ 1016 x 457 x 457mm Rapid Feedrates XYZ: 24 x 24 x 19m/minute Min - Max Height under Spindle 101 - 736mm Spindle Motor Power 20Hp Spindle Speed 8000rpm Tool Change Capacity 16 Station Tool Size DIN40 Machine Dimensions 3600 x 2700 x 2600mm. Machine Weight 4090kg

Controller : Win Max StrokeAxis X, Y, Z : 533 x 406 x 483 mm Stroke Axis A, C : +30°/-110° /// 360° Distance spindle nose / table Min/ Max : 36 / 519 mm Table dimension : 198 mm Maxi table weight : 150 kg T : 6 x 10 mm Spindle speed : 12000 rpm Spindle power : 7.5 kW Tools magazin : 24 Part Probe : RMP400 & RMI-Q sensor Tool Probe : NCRTX/RX laser tool probe