Category: 101 boring mills and machining centers / High Speed Radial Borers
Latest update: 20.11.2023 add to watchlist
approved
dealer
item-No.: 161436954
New in: 1986

used

Location: Land-de

add to watchlist

Machine type: High speed radial drilling machine Manufacturer: HKS Model: HKS 34 MG Year of construction: 1986 Condition: very good Type of offer: used machine Specifications: Table: 1200 x 560 mm Side table: 550 x 340 mm Drilling diameter: 45 mm Drilling depth: 170 mm Speed range: 38 - 2000 rpm. Tool holder: MK4 Projection: 930 mm Drive: 1.5 / 3.0 kW Remark: automatic feed with el./magn. Tripping threading device, coolant device, vertical clamping plate 500 x 670 mm, Chuck Weight: 2000 kg The machine is in a very good and immediately ready condition and can be viewed and demonstrated with us. We would be pleased if you are interested in our offer. Subject to errors, changes and prior sale.

Category: 109 other metal working machines
Latest update: 28.03.2024 add to watchlist
approved
dealer
item-No.: 162453402
New in: 2006

used

check Seller: Stange Werkzeugmaschinen GmbH & Co. KG
Location: 37235 Hessisch Lichtenau Land-de
Price: 1.500 € add to watchlist

Rotary actuator, hydraulic motor HKS rotary actuators Type: DA-H 125 - 180 Rotation angle 180 Operating pressure max. 210 bar Nominal torque max. approx. 5000 Nm Shaft diameter 70 mm Shaft pin length 140 mm Keyway width in the shaft 20 mm Flange diameter 222 mm Centering diameter 150 mm bolt circle 195 mm Connection thread 1/2 flange with 8 mounting holes 18 mm - 2 pieces screw-in fittings from 1/2 to 16S Overall length housing without drive shaft, without centering edge 384 mm Overall length housing with drive shaft 535 mm Weight 70 kg very good condition - New, unused from stock dissolution; used

Category: 101 boring mills and machining centers / High Speed Radial Borers
Latest update: 28.03.2024 add to watchlist
approved
dealer
item-No.: 163374332
New in: 1979

used

check Seller: WMT GmbH & Co. KG
Location: 46342 Velen Land-de

add to watchlist

bore capacity in steel (diameter): 32 mm bore capacity in cast iron: 40 mm workpiece height max.: 550 mm table surface area: 1530 x 750 mm spindle taper MT: 4 throat: 1000 mm bore spindle stroke: 170 mm spindle turning speed range: 38 - 2000 U/min voltage: 380 V connected load: 5,0 kW weight of the machine ca.: 2,0 t dimensions of the machine ca.: 2,0 x 1,6 x 2,1 m Fast radials with - feed - 3 tables - Thread cutting device - Coolant system - Tool holder with tools see pictures The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 101 boring mills and machining centers / High Speed Radial Borers
Latest update: 27.03.2024 add to watchlist
approved
dealer
item-No.: 163589808
New in: 1979

used

check Seller: Surplex GmbH
Location: Velen-Ramsdorf Land-de
Price: used machinery auction RESALE 1.900 € add to watchlist

Description: Rapid radials with - Advance - Thread cutting device - Tool holder with tools - Coolant system see pictures Drilling capacity in steel 32 mm Drilling capacity in cast iron 40 mm Workpiece height - max. 550 mm Table clamping surface 1530 x 750 mm Spindle holder MK 4 Projection 1000 mm Drill spindle stroke 170 mm Spindle speeds 38 - 2000 rpm Operating voltage 380 V Connected load 5.0 kW Machine weight approx. 2.0 t Space requirement approx. 2.0 x 1.6 x 2.1 weight approx.: 2,000 kg, Approx. Onsite Dimension. (l x w x h): 2,000 x 1,600 x 2,100 mm

Category: 101 boring mills and machining centers / High Speed Radial Borers
Latest update: 25.03.2024 add to watchlist
approved
dealer
item-No.: 128564400

used

check Seller: EnTeHa GmbH & Co.KG
Location: Land-de

add to watchlist

Preliminary information: stock no. 4657: 1 used Rapid radial drilling machine Make DONAU, mod. DR 28 Z with drilling head adjustment 600 mm work range: table 1200 x 500 mm

Category: 101 boring mills and machining centers / High Speed Radial Borers
Latest update: 06.02.2024 add to watchlist
approved
dealer
item-No.: 159544799

used

check Seller: Schrenk Werkzeugmaschinen
Location: 91126 Schwabach Land-de

add to watchlist

well-preserved machine with wind device

Category: 101 boring mills and machining centers / High Speed Radial Borers
Latest update: 25.03.2024 add to watchlist
approved
dealer
item-No.: 160897582

used

check Seller: Vramac Machines bv
Location: 7327 Apeldoorn Land-nl

add to watchlist

Code 220406 Description of fast radial MK-4 Brand DONAU Type DR – 32 Machine r. 686 – 3 Year of construction ± 19.. Capacity in steel 60 32 mm Capacity in GG 45 mm Tapping in steel 60 M 26 Thread cutting in GG M 36 Spindle holder 4 MK Projection 900 mm Table 1200 x 600 mm Vertical movement of the boom 400 mm Spindle stroke 190 mm Spindle table min. – max. 80 – 650 mm 18 spindle speeds 31 – 1370 rpm Spindle feeds 0.1 – 0.15 – 0.2 – 0.3 mm/rev Power 1.5 / 2.2 kW – 380 volts Accessories tapping device Dimensions Br. x D x H 1200 x 1600 x 1910 mm Weight 1700 kgs Condition machine is in normal condition

Category: 101 boring mills and machining centers / High Speed Radial Borers
Latest update: 25.03.2024 add to watchlist
approved
dealer
item-No.: 161098519

used

check Seller: Vramac Machines bv
Location: 7327 Apeldoorn Land-nl

add to watchlist

Code 230302 Description of fast radials Brand DONAU Type DR – 13 G Machine r. 321 – 2 Year of construction 1966 Capacity in steel 60 13 mm Capacity in GG 16 mm Thread cutting capacity in steel M8 – M 10 Thread cutting capacity in cast iron M 10 – M 12 Spindle holder 2 MK Projection 820 mm Table 1000 x 700 mm Vertical movement of the boom 400 mm Spindle stroke 100 mm Spindle table min. – max. 180 – 580 mm Spindle speeds infinitely variable in 2 steps 200 – 1100 / 600 – 3400 rpm Power 0,37 / 0,44 kW – 380 Volt Dimensions Br. x D x H 1000 x 1300 x 1800 mm Weight 590 kgs Condition machine is in normal condition

Category: 101 boring mills and machining centers / High Speed Radial Borers
Latest update: 26.01.2024 add to watchlist
approved
dealer
item-No.: 161147929
New in: 1998

used

check Seller: Mieth Maschinenhandel
Location: 63322 Rödermark Land-de

add to watchlist

offer 23036 Specifications: - Drilling capacity into solid steel ST 60 32 mm - Drilling capacity GG 25 40 mm - Thread cutting ST 60 M 27 - Drilling spindle holder MK 4 - Quill stroke 150 mm - 12 drilling spindle speeds 102 - 2000 rpm - 3 drill feeds 0.1 - 0.3 mm - min./ max. distance spindle – table 310 / 610 mm - Drilling radius min / max 400 / 1200 mm - Table height 720 mm - Table size 1200 x 500 mm - Drive 400 V / 1.6 / 2.9 kW - Space requirement approx. W 1200 x H 2800 x D 2300 mm - Weight approx. 1500 kg - with: - Tapping device - hydr. Columns + boom clamp - Coolant device - T – Grooves Vertical on the rear side of the machine

Category: 101 boring mills and machining centers / High Speed Radial Borers
Latest update: 25.03.2024 add to watchlist
approved
dealer
item-No.: 162766238
New in: 1988

used

check Seller: Vramac Machines bv
Location: 7327 Apeldoorn Land-nl

add to watchlist

Key data: 40 mm, 1007 mm

Code 231027 Rewriting Controlled Fast Radials Make DONAU Type DR 40 Machine No. 1137 – 3 Built in 1988 Drilling into full stem 60 40 mm Drilling into full GG 22 50 mm Tapping capacity into the St. 60 M 33 Tapping capacity into the GG 22 M 45 Steep taper of the drilling spindle SK 40 Feed normal ( 5x ) 0.075 – 0.6 mm/rev Drilling spindle speeds 18 pcs. 35 – 1800 rpm Drilling spindle stroke 200 mm Drilling radius min/max 350 / 1300 mm Projection min/max 120 / 1007 mm Height adjustment of the drilling spindle head 450 mm Distance drilling spindle/table min/max 350 / 800 mm Table top 1225 x 750 mm Power 2 / 3 kW 380 Volt Weight 2000 kgs Dimensions LxWxH 2300 x 1225 x 2400 mm Accessories for tapping device Coolant system Condition machine is in good condition

Category: 101 boring mills and machining centers
Latest update: 30.08.2023 add to watchlist
approved
dealer
item-No.: 158218230

used

check Seller: Muller Machines SA
Location: Land-ch

add to watchlist

Technical data Table length: 550 mm Table width: 320 mm Longitudinal travel (X-axis): 400 mm Transversal travel (y-axis): 250 mm Vertical travel (z axis): 400 mm Table load max.: 400 kg Drill capacity in steel: 20 mm Taper in spindle: MT: 2 Stroke of drilling spindle (Z-axis): 130 mm Bore diameter max.: 75 mm Distance table to spindle: 590 mm Spindle speeds: stepless from: 60 rpm up to: 3000 rpm Feeds: Drill spindle slide: number (steps): 2 from: 0.03 mm/r up to: 0.06 mm/r Voltage 50 Hz 3x: 380 Volt Spindle motor: 0.80 HP Machine´s weight about: 1100 kg Overall dimensions machine: Length: 1200 mm Width: 1150 mm Height: 1650 mm Various accessories: Lamp

Category: 101 boring mills and machining centers
Latest update: 30.08.2023 add to watchlist
approved
dealer
item-No.: 158218396

used

check Seller: Mach4metal
Location: Land-nl

add to watchlist

Spindle diameter: 50 mm Cross X: 1985 mm Vertical Y: 1620 mm Table length: 1600 mm Table width: 1400 mm Positions ATC: 0   Number of pallets: 0   CNC Brand: Heidenhain CNC Model: TNC 155 UNION - BFT 110 / 7 Horizontal borer Ø 110 X 1985 Y 1620 Z 1960 W 710 mm MACH - ID 6417 Make: UNION Type: BFT 110 / 7 Control: Heidenhain TNC 155 YOP: 1987 X – Travel:              1.985mm Y – Travel:              1.620mm Z – Travel:              1.960mm W – Travel:              710mm Table Length:            1.600mm Table Width:             1.400mm Table load:              6.300kg Speeds / ranges:         1250Rpm P ...

Category: 101 boring mills and machining centers
Latest update: 30.08.2023 add to watchlist
approved
dealer
item-No.: 158218849

used

check Seller: Mach4metal
Location: Land-nl

add to watchlist

Spindle diameter: 100 mm Cross X: 1250 mm Vertical Y: 900 mm Table length: 1120 mm Table width: 1000 mm Positions ATC: 0   Number of pallets: 0   CNC Brand: Siemens CNC Model: Sinumerik MAKE   TOS Varnsdorf TYPE    WH 10 CNC YEAR   80 er SPECIFICATIONS Controll    Siemens Sinumrik Floor or table type borer  Table borer X - Travel   1250 mm Y - Travel     900 mm Z - Travel     630 mm W - Travel   1000 mm Spindle Diameter Ø   100 mm Spindle Taper    ISO 50 kW power on spindle   30 kW Spindle speeds / ranges    1300 Rpm Table Length x Width    1120 x 1000 mm Table load in kG    3000 Kg Number off controlled axis    4 DIMENSIONS Length    4500 mm Width      3800  ...

Category: 101 boring mills and machining centers / Jig Borers
Latest update: 25.03.2024 add to watchlist
approved
dealer
item-No.: 127537132

used

check Seller: EnTeHa GmbH & Co.KG
Location: 64653 Lorsch Land-de
VS

add to watchlist

No. 2630: 1 gebr. CNC vertical milling machines and drill / jig boring machine Fabr. BURKHARDT & WEBER Type 120 NCW HYOP Retrofit / overhauled in 2000 with HEIDENHAIN TNC 426 PB ARB.-ber.: 1250 x 630 x 560 mm Power: 44 kW Accessories: fixed table / table 1200 x 710, additional table top height 200 mm,. 36-Fach tool changer magazine, coolant system / coolant. HEIDENHAIN - probe / probe TS 630 -the pictured magnetic clamping table is not included! -Miscellaneous: spindle ISO 50, revs / speed range 30-3000 min-1 (with optional high-speed spindle) Max torque / torque 522 NM Rapid / rapid feed 10 m / min maximum distance spindle nose - table surface 725 mm Projection spindle Center - stands 800 mm. Space requirements / measurements approx. 5 x 5 m, weight / weight approx. 12 to The engine was overhauled in 2000 General / retrofitted and modernized with digital drive ...

Category: 101 boring mills and machining centers / Jig Boring Machines
Latest update: 25.04.2022 add to watchlist
approved
dealer
item-No.: 158793892

used

check Seller: WAHO Werkzeug- und Maschinenhandelsges. mbH
Location: Land-de

add to watchlist

Jig boring machine make SIP type MP 3 KFabr.-Nr. 9809 year 1981Clamping surface of the worktable: 520 x 380 mmLongitudinal adjustment of the work table: 450 mmTransverse adjustment of the drill spindle slide: 350 mmDistance between table surface max .: 520 mmxa0xa0xa0 and drill spindle: 120 mmPassage between the uprights: 600 mmVertical adjustment of the crossbeam: 400 mmDrill spindle: MK 2Infeed stroke: 150 mmSpindle speeds: 75-2000 rpm.automatic feed: 0.02-0.18 mmDrilling capacity in cast iron Drm.:25 mmxa0xa0xa0 in mild steel Drm.:20 mmGr. boring diameter: 100 mmReading on the auxiliary scale: 1 mmAccuracy: 0.005 mmMain drive motor: 1 hpDimensions L x W x H: 1740 x 1520 x 1880 mmWeight approx: 1680 kgWith- guide arm- Coolant deviceused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are  ...

Category: 101 boring mills and machining centers
Latest update: 30.08.2023 add to watchlist
approved
dealer
item-No.: 157817169

used

check Seller: Muller Machines SA
Location: Land-ch

add to watchlist

Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Table length: 0 mm Table width: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Table length: 1100 mm Table width: 842 mm Longitudinal travel (X-axis): 1000 mm Transversal travel (y-axis): 795 mm Vertical travel (z axis): 800 mm Table load max.: 800 kg Drill capacity in steel: 55 mm Taper in spindle: MT: 4 Stroke of drilling spindle (Z-axis): 250 mm Bore diameter max.: 300 mm Spindle speeds: number (steps): 18 from: 40 rpm up to: 2000 rpm Feeds: Table: stepless up to: 300 mm/min Drill spindle slide: number (steps): 6 from: 0.04 mm/r up to: 0.35 mm/r Rapid traverse: Table:longitudinal: 2500 mm/min transversal from: 2500 mm/min Distance between columns: 1100 mm Distance between spindle and table: 900 mm Voltage 50 Hz 3x: 380 Volt Spindle motor: 4.00 HP Total power required: 8.0 HP Machine´s weight about: 7500 kg Overall dimensions ma ...

Category: 101 boring mills and machining centers
Latest update: 30.08.2023 add to watchlist
approved
dealer
item-No.: 157817209

used

check Seller: Muller Machines SA
Location: Land-ch

add to watchlist

Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Table length: 0 mm Table width: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Table length: 400 mm Table width: 300 mm Longitudinal travel (X-axis): 200 mm Transversal travel (y-axis): 200 mm Verticla travel (W-axis): 250 mm Drill capacity in steel: 10 mm Drill depth (spindle stroke): 70 mm Distance table to spindle: 320 mm Spindle speeds: stepless from: 150 rpm up to: 3000 rpm Voltage 50 Hz 3x: 380 Volt Spindle motor: 0.5 HP Machine´s weight about: 700 kg Overall dimensions machine: Length: 1200 mm Width: 1000 mm Height: 1800 mm Various accessories: Digital readout number of axis:: 2 Drill chuck Centering microscop Set of collets

Category: 101 boring mills and machining centers
Latest update: 30.08.2023 add to watchlist
approved
dealer
item-No.: 157817232

used

check Seller: Muller Machines SA
Location: Land-ch

add to watchlist

Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Table length: 0 mm Table width: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Table length: 400 mm Table width: 300 mm Longitudinal travel (X-axis): 200 mm Transversal travel (y-axis): 200 mm Verticla travel (W-axis): 250 mm Drill capacity in steel: 10 mm Drill depth (spindle stroke): 70 mm Distance table to spindle: 320 mm Spindle speeds: stepless from: 150 rpm up to: 3000 rpm Voltage 50 Hz 3x: 380 Volt Spindle motor: 0.5 HP Machine´s weight about: 700 kg Overall dimensions machine: Length: 1200 mm Width: 1000 mm Height: 1800 mm Various accessories: Digital readout number of axis:: 2 Manufacturer: HEIDENHAIN Rotary table diameter: 300 mm Drill chuck Boring head Microscope Centering divice with dial indicator Set of collets Lamp

Category: 101 boring mills and machining centers
Latest update: 30.08.2023 add to watchlist
approved
dealer
item-No.: 157817395

used

check Seller: Muller Machines SA
Location: Land-ch

add to watchlist

Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Table length: 0 mm Table width: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Table length: 550 mm Table width: 320 mm Longitudinal travel (X-axis): 400 mm Transversal travel (y-axis): 250 mm Vertical travel (z axis): 400 mm Drill capacity in steel: 20 mm Taper in spindle: MT: 2 Stroke of drilling spindle (Z-axis): 130 mm Bore diameter max.: 75 mm Distance table to spindle: 600 mm Spindle speeds: stepless from: 120 rpm up to: 3000 rpm Feeds: Drill spindle slide: number (steps): 2 from: 0.03 mm/r up to: 0.06 mm/r Voltage 50 Hz 3x: 380 Volt Spindle motor: 0.75 HP Machine´s weight about: 1500 kg Overall dimensions machine: Length: 1400 mm Width: 1500 mm Height: 2100 mm Various accessories: Tool cabinet Drill chuck Set of drills Set of milling cutters

Category: 101 boring mills and machining centers
Latest update: 30.08.2023 add to watchlist
approved
dealer
item-No.: 157817504

used

check Seller: Muller Machines SA
Location: Land-ch

add to watchlist

Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Table length: 0 mm Table width: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Table length: 400 mm Table width: 300 mm Longitudinal travel (X-axis): 200 mm Transversal travel (y-axis): 200 mm Vertical travel (z axis): 250 mm Drill capacity in steel: 10 mm Taper in spindle: MT Drill depth (spindle stroke): 70 mm Distance table to spindle: 320 mm Spindle speeds: stepless from: 150 rpm up to: 3000 rpm Feeds: Drill spindle slide: from: 0.015 mm/r Voltage 50 Hz 3x: 380 Volt Spindle motor: 0.5 HP Machine´s weight about: 700 kg Overall dimensions machine: Length: 1200 mm Width: 1000 mm Height: 1800 mm Various accessories: Digital readout number of axis:: 2 Manufacturer: PHILIPS Drill chuck Set of boring head Centering microscop Set of drills Device for laying out

Category: 101 boring mills and machining centers
Latest update: 30.08.2023 add to watchlist
approved
dealer
item-No.: 157817530

used

check Seller: Muller Machines SA
Location: Land-ch

add to watchlist

Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Table length: 0 mm Table width: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Table length: 400 mm Table width: 300 mm Longitudinal travel (X-axis): 200 mm Transversal travel (y-axis): 200 mm Vertical travel (z axis): 250 mm Drill capacity in steel: 10 mm Taper in spindle: MT: 0 Drill depth (spindle stroke): 70 mm Distance table to spindle: 320 mm Spindle speeds: stepless from: 150 rpm up to: 3000 rpm Feeds: Drill spindle slide: from: 0.015 mm/r Voltage 50 Hz 3x: 380 Volt Spindle motor: 0.5 HP Machine´s weight about: 700 kg Overall dimensions machine: Length: 1200 mm Width: 1000 mm Height: 1800 mm Various accessories: Digital readout number of axis:: 2 Manufacturer: ELESTA Rotary table diameter: (Ref. 0330.2) Ø 300 mm Drill chuck Set of boring head Microscope Centering microscop Centering divice with dial indicator Set of collet ...

Category: 101 boring mills and machining centers
Latest update: 30.08.2023 add to watchlist
approved
dealer
item-No.: 157817568

used

check Seller: Muller Machines SA
Location: Land-ch

add to watchlist

Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Table length: 0 mm Table width: 0 mm CNC Brand: 0 CNC Model: 0 Control: HEIDENHAIN TNC 155 / J200 Technical data Table length: 1020 mm Table width: 860 mm Longitudinal travel (X-axis): 900 mm Transversal travel (y-axis): 600 mm Vertical travel (z axis): 635 mm Table load max.: 800 kg Taper in spindle: ISO: 40 Stroke of drilling spindle (Z-axis): 200 mm Distance table to spindle: 15 - 850 mm Spindle speeds: from: 10 - 800 rpm up to: 800 - 2500 rpm Feeds: Table: from: 5 mm/min up to: 5000 mm/min Drill spindle slide: number (steps): 6 from: 0.03 mm/r up to: 0.33 mm/r Distance between columns: 950 mm Voltage 50 Hz 3x: 380 Volt Spindle motor: 4.5 kW Machine´s weight about: 6500 kg Length: 2930 mm Width: 2370 mm Height: 2690 mm Various accessories: Drill chuck Set of boring head Centering microscop Set of tool holders

Category: 101 boring mills and machining centers
Latest update: 30.08.2023 add to watchlist
approved
dealer
item-No.: 157817572

used

check Seller: Muller Machines SA
Location: Land-ch

add to watchlist

Spindle diameter: 0 mm Cross X: 0 mm Vertical Y: 0 mm Table length: 0 mm Table width: 0 mm Positions ATC: 0   Number of pallets: 0   CNC Brand: 0 CNC Model: 0 Technical data Table length: 1000 mm Table width: 810 mm Longitudinal travel (X-axis): 600 mm Transversal travel (y axis): 770 mm Vertical travel (z axis): 670 mm Table swiveling + -: 360 ° Table load max.: 1200 kg Execution: Horizontal Longitudinal feeds: stepless from: 3000.00 mm/min Transversal feeds: stepless up to: 3000.00 mm/min Drill spindle diameter: 75 mm Drill spindle travel: 670 mm Spindle speeds: stepless from: 10 rpm up to: 1200 rpm Voltage 50 Hz 3x: 380 Volt Spindle motor: 11 kW Machine´s weight about: 10000 kg Overall dimensions machine: Length: 3970 mm Width: 2600 mm Height: 2980 mm Various accessories: Tool cabinet Rotary table dimensions:: DIXI 450 P Diameter: 450 mm Set of boring head

Category: 101 boring mills and machining centers
Latest update: 30.08.2023 add to watchlist
approved
dealer
item-No.: 157817586

used

check Seller: Muller Machines SA
Location: Land-ch

add to watchlist

Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Table length: 0 mm Table width: 0 mm CNC Brand: 0 CNC Model: 0 Control: GE FANUC 11 Operating hours: 10751 Technical data Table length: 1100 mm Table width: 842 mm Longitudinal travel (X-axis): 1000 mm Transversal travel (y-axis): 700 mm Vertical travel (z axis): 780 mm Table load max.: 1500 kg Drill capacity in steel: 60 mm Taper in spindle: ISO: 4 B Diameter of drilling spindle: 135 mm Stroke of drilling spindle (Z-axis): 300 mm Bore diameter min.: 60 mm Bore diameter max.: 300 mm Distance table to spindle: 1000 mm Spindle speeds: number (steps): 18 from: 20 rpm up to: 3000 rpm Feeds: Table: from: 0.1 mm/min up to: 6000 mm/min Drill spindle slide: number (steps): 6 from: 0.01 mm/r up to: 0.39 mm/r Rapid traverse: Table:longitudinal: 6000 mm/min transversal from: 6000 mm/min vertical: 6000 mm/min Distance between columns: 1100 mm Vol ...

Category: 101 boring mills and machining centers
Latest update: 30.08.2023 add to watchlist
approved
dealer
item-No.: 157817679

used

check Seller: Muller Machines SA
Location: Land-ch

add to watchlist

Spindle diameter: 0 mm Cross X: 0 mm Vertical Y: 0 mm Table length: 0 mm Table width: 0 mm Positions ATC: 0   Number of pallets: 0   CNC Brand: 0 CNC Model: 0 Technical data Longitudinal feeds: from: 10 mm/min up to: 1600 mm/min Transversal feeds: from: 10 mm/min up to: 1600 mm/min Taper in spindle: MT: 7 Way of the drill slide: 600 mm Drill spindle diameter: 180 mm Drill spindle travel: (Z) 1500 mm Spindle speeds: from: 3.15 rpm up to: 630 rpm Spindle feeds: from: 4 mm/min up to: 630 mm/min Rapid traverse:: 2.5 m/min Milling head:: Ø 260 mm Machine´s weight about: 53000 kg Overall dimensions machine: Length: 8500 mm Width: 5800 mm Height: 9200 mm Various accessories: Rotary table diameter: 2000x2000 Skoda E20 mm

You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)
Banner ad information  
HKS 3rd category level
 
RESALE used machinery 25 years online