Category: 104 grinding machines
Latest update: 30.08.2023 add to watchlist
approved
dealer
item-No.: 158218024

used

check Seller: Muller Machines SA
Location: Land-ch

add to watchlist

Technical data Centre height: 140 mm Distance between centres: 750 mm Table length: 1050 mm Table width: 150 mm Max. grinding diameter: 279 mm Grinding-wheel diameter: 150 mm Longitudinal way of table: 450 mm Transversal way of the table: 230 mm Vertical adjustment of grinding head: 250 mm Slewing range of grinding head: horizontal: 342 ° vertical: 325 ° Grinding spindle speeds: number (steps): 6 from: 2000 rpm up to: 6000 rpm Voltage 50 Hz 3x: 380 Volt Grinding spindle motor: 1.50 HP Machine´s weight about: 1100 kg Overall dimensions machine: Length: 1450 mm Width: 1200 mm Height: 1000 mm Various accessories: Set of collets Set of grinding wheel arbors Tailstock Set of centers Tool cabinet Vice: width

Category: 505 other machinery for waste disposal and recycling
Latest update: 05.10.2023 add to watchlist
approved
dealer
item-No.: 65158
New in: 1988

used

check Seller: ENDERS Produktion GmbH
Location: Land-de

add to watchlist

Work surface: 1,400 x 5,000 mm, stainless steel lining, drive 2 x 2.2 kW

Category: 102 lathes
Latest update: 30.08.2023 add to watchlist
approved
dealer
item-No.: 157817227

used

check Seller: Muller Machines SA
Location: Land-ch

add to watchlist

Center height: 0 mm Center distance: 0 mm Spindle bore: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Centre height: 260 mm Distance between centres: 2000 mm Swing over cross-slide: 340 mm Swing over bed: 520 mm Swing in gap: 620 mm Length of the gap: 145 mm Workpiece weight on centres max.: 760 kg Spindle hole: 42 mm Taper in spindelstock metric: 50 Taper in spindle: Camlock: D6" Spindle speeds: number (steps): 13 from: 20 rpm up to: 1800 rpm Pitch of leadscrew: 6 mm Steep thread transmission: 6:1 Taper in tailstock:: 5 MT Spindle diameter: 80 mm Spindle stroke: 200 mm Feeds: length: from: 0.045 mm/r up to: 2.52 mm/r Frontal: from: 0.003 mm/r up to: 1.75 mm/r Voltage 50 Hz 3x: 380 Volt Spindle motor: 15 HP Machine´s weight about: 2500 kg Overall dimensions machine: Length: 3740 mm Width: 1300 mm Height: 1600 mm Various accessories: Face plate diameter: 550 mm 3-jaw chuck diameter ...

Category: 102 lathes / Turning Machines (Lathes)
Latest update: 24.10.2023 add to watchlist
approved
dealer
item-No.: 19416824

used

check Seller: Catalano Werkzeugmaschinen AG
Location: Land-ch

add to watchlist

Accessories: -Three jaw Chuck ø 630 mm -Multi fix steel holder Tip height 400 mm Top width 2000 mm Recording camlock Turning diameter in the offset 900 mm

Category: 102 lathes / Turning Machines (Lathes)
Latest update: 24.10.2023 add to watchlist
approved
dealer
item-No.: 19416828

used

check Seller: Catalano Werkzeugmaschinen AG
Location: Land-ch

add to watchlist

Accessories: Steel holder Multifix B Tip height 200 mm Top width 1000 mm Spindle speed 5 2520 U/min Turning diameter over bed 405 mm over slide 245 mm Offset bore Ø 500 mm Recording camlock Spindle bore 38 mm Longitudinal feeds 0.029 1.6 mm / Rev Plan feeds 0.022 1.25 mm / Rev Machine weight approx. 1500 kg

Category: 108 welding machines / Welding Machines
Latest update: 26.03.2024 add to watchlist
approved
dealer
item-No.: 134680054
New in: 1990

used

Location: Land-de

add to watchlist

Machine type: WIG welding machine. Manufacturer: Oerlikon. Model: DTW 251-2. Year of build: 1990. Condition: good,. Type of offer: used machine, ,. Technical data:. Type: WIG / Electr.,. Supply: 400 v, Power: 250 amps. Note: 9.6 of kVA, water-cooling of. Weight: 150 kg. ,. The machine is in a good shape and ready for operation. It can be visited and demonstrated at our location.,. ,. We will be pleased if you take an interest in our offer.,.

Category: 107 sheet metal working / CNC Plasma Cutting Machines
Latest update: 09.01.2024 add to watchlist
approved
dealer
item-No.: 148949056
New in: 2013

used

check Seller: Knez.d.o.o.
Location: Land-si
Price: 9.900 € add to watchlist

OERLIKON / ALPHATOME II T30 HP300 PPM 400 OERLIKON - Typ: ALPHATOME II T30 HP300 PPM 400 - Baujahr: à 2013. Special features of the ALPHATOME II series / EQUIPMENT: * Camera system: Moving camera on the cross-drive carriage for easy positioning and cutting monitoring by the operator from the control panel. The graphic is done by a permanently visible button on the touch screen interface. * Protective devices: 7 Facilities for the protection of operating personnel. Photocells in the front and back of the bridge. Emergency stop button on all corners, as well as on the external control panel. * Anti-glare-/splash protection: The anti-glare panel of the bridge is raised or lowered automatically or by pressing a button. On the sides, the panel can be opened manually for the burner and wear parts. Furthermore, the noise development is significantly reduced and resulting smoke is  ...

Category: 102 lathes / CNC Turning Machines
Latest update: 22.06.2022 add to watchlist
item-No.: 159059010
New in: 1987

used

Seller: EDM Technik GmbH
Location: Land-de

add to watchlist

Machine type: CNC lathe Year of construction1987 ControlSiemens Sinumerik 840 DSL(NEW) Mech. Overhaul2021 Machining diameter [mm] 350 Circulation diameter[mm] 400 Turning length [mm] 1000 Support path Z-axis [mm] 1185 Support path X-axis [mm] 370 Main spindle: Technology: DC motor Speed range: 22.4-3550 rpm Gear stages:3 Power: 36kW torque: 1600Nm Spindle head:Size 8 Chuck Diameter:250mm Tool carrier: Technology: Drum turret with directional logistics Tool holders: 12 pieces Tailstock: Pinole diameter:100 mm Pinole Hub:100mm Pinole axial force:15kN Internal cone mount:SK 30 Lunettes: Single and tandem arrangement, self-centering, clamping range:50 –130 mm Hydraulic operating pressure For chucks, drum revolvers, tailstocks and bezels: 60bar Clamping device pressure variable:5 –50 bar Container capacity:60 l Equipment / Accessories: Chip  ...

Category: 112 gear cutting and hobbing machines / Gear Cutting Machines
Latest update: 07.12.2023 add to watchlist
approved
dealer
item-No.: 160297403

used

check Seller: ENGINEX KOSICE
Location: Land-sk

add to watchlist

Package of the Oerlikon machines: 5 pcs Gear milling machine Oerlikon SM 3 2 pcs Gear tester Oerlikon SKT 2 pcs Laping gears Oerlikon SL 3 2 pcs Tool sharpener Magerle SKB

Category: 102 lathes / CNC Turning Machines
Latest update: 12.03.2024 add to watchlist
approved
dealer
item-No.: 162710844
New in: 1984

used

check Seller: Retec Machines S.A.S
Location: Land-fr

add to watchlist

CNC Lathe 2 axes OERLIKON-BOEHRINGER VDF 180 C Numerical Command: PHILIPS Axe X: 295 mm Axe Y: 295 mm Between points: 1000 mm Maxi Ø on bench: Ø 310 mm Maxi turning diameter: Ø 250 mm Rotation: max 4500 RPM Year of construction: 1984 Spindle: Ø 78 mm Turret 8 tools Weight: approx 8 T

Category: 112 gear cutting and hobbing machines / Gear Cutting Machines
Latest update: 05.02.2024 add to watchlist
approved
dealer
item-No.: 163295466

used

check Seller: AUER
Location: 4407 Steyr-Gleink Land-at

add to watchlist

Wheel diameter - max. 320 mm Wheel width 50 mm Module - max. 7.5 Module - min. 2.1 Total power requirement 13 kW Machine weight approx. 7 t Space requirement approx. 1.7 x 1.9 x 2.7 m Tooth width max. 50 mm Adjustment range for hypoid wheels (offset) +/- 60 mm. Through-hole spindle pieces 78 mm. Dive max 20 mm. Cut feeds, infinitely variable 0.04 - 25 mm/min. Distance between taper tip/workpiece spindle... 100 - 345 mm. Distance between the centre of the cone and the cutter head axis 25 - 150 mm. Distance between the center of the taper and the milling head spindle... 80 - 220 mm. Max. ring wheel Ø at medium spiral angle... 320 mm. Max. gear ratio 1 : 9.5 Module 2.1 - 7.5 Outer cone spacing approx. 170 mm. Rapid traverse 1.5 m/min. Roll feeds in minutes of angle... 0,3 - 20 Spindle nose with short taper, inside 140 mm. Spindle nose with short taper, external 85 m ...

Category: 102 lathes / Turning Machines (Lathes)
Latest update: 19.03.2024 add to watchlist
approved
dealer
item-No.: 163609599

used

check Seller: Catalano Werkzeugmaschinen AG
Location: 6260 Reiden Land-ch

add to watchlist

Center height 225 mm Center width 1000 mm Spindle bore 42 mm

Category: 101 boring mills and machining centers
Latest update: 08.01.2024 add to watchlist
approved
dealer
item-No.: 122953391
New in: 1966

used

check Seller: D Cunha Industriemaschinen GmbH
Location: D - Niedersachsen Land-de

add to watchlist

Controls: Heidenhain TNC 360 (1992) Table size: 1,000 x 1,000 mm Table size with extension: 1,345 x 1,000 mm Table load max.: 2,000 kg Distance between the s distance Spindle to table top: 0 - 1,100 mm Travel distances: X 1400 mm Y 900 mm Z 850 mm W 370 mm spindle holder: MK 5 spindle drive power: 6 kW spindle speeds: 30 - 1,500 rpm Drilling spindle diameter: 82 mm drill diameter: 2 - 70 mm Drilling tools Diameter: 17 - 450 mm Drilling capacity to full ST60: 45 mm Drilling capacity to full GG: 70 mm Zubehoer: drills; tools; usw. machine was rebuilt in 1992 and !; Very good

Category: 108 welding machines
Latest update: 17.07.2018 add to watchlist
approved
dealer
item-No.: 65545565
New in: 2001

used

check Seller: CNC Servicetechnik Sperling
Location: D - Bayern Land-de
Price: 19.000 € add to watchlist

; operational as of week 33

Category: 108 welding machines
Latest update: 17.07.2018 add to watchlist
approved
dealer
item-No.: 65545592
New in: 1994

used

check Seller: CNC Servicetechnik Sperling
Location: A - Salzburg Land-de
Price: 18.000 € add to watchlist

; available as of week 20/2014

Category: 108 welding machines
Latest update: 17.07.2018 add to watchlist
approved
dealer
item-No.: 65545561
New in: 2001

used

check Seller: CNC Servicetechnik Sperling
Location: D - Bayern Land-de
Price: 19.000 € add to watchlist

Manufacturer: SAF Type: Oxytome 30 Working range: 6000 x 3000 mm Technology: Plasma oxyfuel Built: 2001 Equipment Hardware: 1x SAF Nertajet HP 125 Only very little use 2x SAF Nertajet HP 300 connected in series 1x autogen burner Without fuel cutting tables without filter system Div. Wear parts equipment Control & Software: DIGISAF 500 Machine control Other information: System is available from week 33 cutting performance see PDF assembly and commissioning on request; ready for use from KW 33

Category: 108 welding machines
Latest update: 17.07.2018 add to watchlist
approved
dealer
item-No.: 65545589
New in: 1994

used

check Seller: CNC Servicetechnik Sperling
Location: A - Salzburg Land-de
Price: 18.000 € add to watchlist

SAF Type: Multitome PMD Working area: 5000 x 2000 mm Technology: Plasma-Autogen Year : 12 / 1994 Equipment Hardware: SAF ZIP 5.0 (45A - 150A)(built year 12 / 2000) 1x autogen burner (interchangeable on same support) Without filter system Wear parts Equipment Control & Software: SAF Machine Control (NC System) system is available from KW 20 / 2014 assembly and commissioning on request; available from KW 20 / 2014

Category: 1300 other machines and plants
Latest update: 10.05.2018 add to watchlist
approved
dealer
item-No.: 113870941

used

Location: Land-de
Price: 7.000 € add to watchlist

Leybold pump level Data on pump level: RUTA - Pump system RUTA 1001 (20900895586) (02209= Pre-pump: Leybold Sogevac SV300 Cat: 109 31 booster pump: Leybold Ruvac WAU1001 Kat: 11741 Condition: The pump level is completely cleaned and repainted and tested according to the manufacturer's specifications and is 100% fine, without oil leak Performance: 3 months 22x SV300 +WSU1001H are available! There are 10x SV300 + WAU1001 verguegable! ; ready for use

Category: 101 boring mills and machining centers
Latest update: 08.01.2024 add to watchlist
approved
dealer
item-No.: 122953392
New in: 1966

used

check Seller: D Cunha Industriemaschinen GmbH
Location: D - Niedersachsen Land-de

add to watchlist

Control: Heidenhain TNC 360 (1992) Table size: 1000 x 1000 mm Table size with front extension: 1345 x 1000 mm Table load max.: 2000 kg Distance spindle centre to column min/max.: 270 ~ 1270 mm Distance spindle nose to table min/max.: 0 - 1100 mm Distance between the upright columns: 1855 mm Table longitudinal travel : 1400 mm Boring ram carriage cross travel: 900 mm Crossrail vertical travel: 850 mm Boring spindle travel: 370 mm Spindle motor rating: 6 KW Spindle speed range: 30 - 1500 rpm Boring spindle diameter: 82 mm Spindle taper: MK 5 Borer diameter: 2 - 70 mm Boring tool diameter: 17 - 450 mm Boring diameter in solid ST 60: 45 mm Boring diameter in solid Cast iron: 70 mm Equipped with: Tooling; Accessories Machine overhauled and retrofitted in 1992 !; Very good

Category: 1300 other machines and plants
Latest update: 10.05.2018 add to watchlist
approved
dealer
item-No.: 124081486

used

Location: Land-de
Price: 7.000 € add to watchlist

LEYBOLD pump level data to the pump status: RUTA - RUTA 1001 (20900895586) Pumpenystem (= 02209 Backing pump: LEYBOLD Sogevac SV300 Cat: 10931 Booster pump: Leybold Ruvac WAU1001 Cat: 11741 Condition: to see in Picture 3-6. The pump stand is completely clean newly painted and serviced in accordance with the manufacturer's specifications and tested and is 100% right, no oil leak Warranty: 3 months There are 2 x SV300 + WSU1001H available! There are 10 x SV300 + WAU1001 verguebar! Price refers to 1 PCs.; ready for operation

Category: 1409 pumps
Latest update: 27.03.2024 add to watchlist
approved
dealer
item-No.: 142353573

used

check Seller: Ehrler Beck GmbH
Location: 71272 Renningen, Industriestr. 16 Land-de
Price: 1.250 € add to watchlist

Oerlikon Leybold Trivac D 8 B with 0.37 KW AC-motor, 8 m3/h, final pressure:

Category: 1409 pumps
Latest update: 27.03.2024 add to watchlist
approved
dealer
item-No.: 142353581

used

check Seller: Ehrler Beck GmbH
Location: 71272 Renningen, Industriestr. 16 Land-de
Price: 1.590 € add to watchlist

Oerlikon Leybold Rotary Vane Vacuum Pump Trivac D 16 B with 0.55 KW EW engine, 16 m3/h, final pressure: .1x10-4 mbar, completely overhauled with all wear parts, 1 year warranty

Category: 1409 pumps
Latest update: 27.03.2024 add to watchlist
approved
dealer
item-No.: 142353586

used

check Seller: Ehrler Beck GmbH
Location: 71272 Renningen, Industriestr. 16 Land-de

add to watchlist

Oerlikon Leybold Rotary Vane Vacuum Pump Trivac D 16 B with 0.55 KW DS engine, 16 m3/h, final pressure: .1x10-4 mbar, completely overhauled with all wear parts, 1 year warranty

Category: 1409 pumps
Latest update: 27.03.2024 add to watchlist
approved
dealer
item-No.: 142353623
New in: 2013

used

check Seller: Ehrler Beck GmbH
Location: Land-de

add to watchlist

Leybold vacuum pump SV 100 B with 2.2 KW AC-motor, - 0.5 mbar (without gas ballast), completely overhauled with all wearing parts, 1 year warranty

Category: 1409 pumps
Latest update: 27.03.2024 add to watchlist
approved
dealer
item-No.: 142353625
New in: 2003

used

check Seller: Ehrler Beck GmbH
Location: Land-de

add to watchlist

Leybold SV 300 with 5.5 KW AC-motor, 300 m3/h, max. vacuum: x 0.08 mbar (without gas ballast), completely overhauled with all wearing parts, 1 year warranty

You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)
Banner ad information  
RESALE used machinery 25 years online