used HILTI Diamond core drills

Concrete tester Hilti Ferroscan FS10 Monitor RV10 Scanner RS10 Type Ferroscan FS10 consisting of: -Monitor RV10 -Scanner RS10 -Charger TCU12H -Battery Pack RB 10 -in shock-resistant plastic case The memory of the device is defective. The device works properly, but as soon as you turn it off, it loses the recorded data. The portable Ferroscan system is used for large-scale, fast and simple -Detection and identification of reinforcement iron in Concrete substrates -Measurement of overlap, diameter and position of Reinforcements in concrete substrates e.g. for testing the reinforcement in concrete parts, Walls or ceilings -Measurement of safety-relevant purposes, e.g. for structural engineering -Additional advantage: By locating the reinforcements avoid accidents and damage caused by hits iron, pipes and electrical wires." Bcsepogfc3 The Ferroscan system i ...

Rotary hammer, chisel hammer, combination hammer, Bosch hammer -Nominal consumption: 650 W -Mains connection: 230 V -Drill -Weight: 15 kg

Mobile construction compressor make HILTI type DK 550Machine -No: 01873 Year 1974Operating pressure: 7 atmAir volume p.min .: 550 l / minCompressor speed: 1400 rpmDrive power: 5.5 hpOutside dimensions: 630 x 1000 x 600 mmWith- compressed air hoseused, from an operational resolutionin good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offerand are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Toggle dowels, anchor hooks -Type: EKD-HM4 -Number per package: 50 pieces -M4 threaded rod -Price: per package -Number of packages: 12 -Weight: 1.2 kg/package

Toggle dowels, anchor hooks -Type: EKD-HM5 -Number per package: 25 pieces -M4 threaded rod -Price: per package -Number of packages: 21 -Weight: 1 kg/package

Hammer drill, chisel hammer, combination hammer, Bosch hammer, cordless hammer drill -Manufacturer: Hilti, cordless hammer drill type TE 6-A -Power: 36V -incl.: charger and accessories with case, without batteries -Dimensions case: 580/400/H145 mm -Total weight: 8 kg

Sell a Hilti DAG 230-D. Sold incl. the diamond disc. The machine is in good condition, functional and tested.

Injection mortar, two-component adhesive, chemical dowels -Manufacturer: BeA, industrial staples staples type HIT-HY 200-A -Quantity: 17x containers available -Price: per container -Transport dimensions: 270/100/H60 mm -Weight: 0.8 kg/pc.

Bolt gun, bolt setting tool -Hilti DX 460 nail gun -Magazine: MX 72 -Suitcase -Quantity: 2x shooting devices available -Price per piece -Weight: 6 kg/piece

Diamond core drilling machine, core drilling machine -3x: drill stand -Max. Drilling capacity: Ø 60 mm -drilling depth: max. 400 mm -Drive: 1050 W -Speeds: 1500/3000 rpm -Core drill: Ø 18/24/29 mm -Sale: only complete -Weight: 70 kg

Diamond core drilling machine -Drill stand -Vacuum pump -Core drill: Ø 202 mm -Dimensions: 500/370/H1070 mm -Weight: 53 kg

Diamond core drilling machine -Drill stand -Vacuum pump -Water pump tank -Core drill: Ø 15/20/3x 25/3x 28/32/40 mm

Hütte D-100 directional drill with Halliburton H400, Crown 5 plunge pumps (2), complete with drill units and directionsl drill head, unmagnetic drill head, approx. 250 tons rods available (can be sold apart), cabin etc. etc. Complete or in parts.

Drill diameters 8 - 40 mm Drill taper MK4 Max. profile height 1.000 mm Max.Profile length 18.000 mm Max. thickness 150 mm Controller Siemens 840D

Stable drilling machine for core drilling up to borehole diameters of 1250mm; suitable for reinforced concrete; Including hydraulic power unit HAG-12.10; Including drill bit DN 1200 (length 160 cm) with used segments, DN 1000 (length 145 cm) with worn segments and DN 1000 (length 80 cm) without segments; including 1 set of new diamond segments for drill bit DN 1000 for reinforced concrete

<br>8-30 mm<br><br>Still in operation: Yes<br>Available: immediately

2930-12-334-9277 / 0052000675

Max. working width: 2000mm, min. cutting width: 10mm, core diameter: 76/ 152mm, circular knife diameter: 100mm, max. wall thickness: 10mm, with documentation, the machine was hardly used.

Betschart Swiss Transformer Core Testing System KPA 15 Function The output voltage, which can be infinitely adjusted by hand by means of a rotary knob, is guided directly to the excitation coils of the test core. In this way, an electromagnetic field that is as homogeneous as possible is to be built up in the air gap of the test core, with which nuclear material inserted in the air gap can be characterized. The basic operation of the core test system is carried out via the switching and display elements on the front panel at the front of the test trolley. Specifications Input voltage : 2 x 400 V – 50/60 Hz Input current : 38.3 A maximum Output voltage : 0 ... 230 V Output current : 65 A maximum Measurements : Rotary iron voltmeter 0 ... 500V for input voltage Rotary iron voltmeter 0 ... 250V for output voltage Rotary iron Ampèremeter 0 ... 40/80A for input current Rot ...

5kg = approx. 149 pcs welding electrode, rod electrode with reinnickel core rod unused, Manufacturer Thyssen Type Nickel A Original shrink-wrapped in foil, ovp in cardboard! The electrode melts slightly delayed by a pulsating arc, whereby a very good wetting of the base material is achieved. Particularly suitable for joint welding on grey cast iron (old cast iron) Dimensions, welding data, packaging units Diameter (mm) Length (mm) Welding current (A) Directional weight (kg/1000 pcs) Package contents (pieces) Package contents (kg) 2,5 350 50 - 100 21,0 238 5,0 3,25 350 70 - 130 33,5 149 5,0 4,00 350 90 - 150 49,5 101 5,0 Weight approx. 5kg Diameter 3.2mm

Magnetic drilling machine, magnetic drilling machine Core hole drilling machine, Metal core hole drilling machine DR. BENDER Type EK 323 Masch No. 180543 Year of construction approx. 1988 Drilling capacity 23 mm Spindle holder MK 2 Spindle speed 160 / 400 / 1250 rpm. Magnet 215 x 105 mm Drilling unit 220 Volt, 50 Hz, 1025 Watt E-magnet 220 Volt, 50 Hz, 65 Watt - Spindle speed via 3 gear stages - Left and clockwise rotation - E-magnet KOCH, type KL32/6 - Drill head height adjustment guided in a linear guide - manual expulsor - Drill stand rotatable on magnetic base, clamping via toggle screw Dimensions L x W x H 680 x 380 x 630 mm Weight 35 kg good condition; used

Square screws with core attachment, 46 pieces PAGUS M8 x 75 mm DIN 479 pitch: 1,25 Thread length: 65 mm Total length: 75 mm Screw cap: 8 x 8 mm head thickness: 8 mm Core attachment: Ø 6.5 x 2 mm Material: Steel New ! Dimensions ( packaging ): 160 x 110 x 35 mm

Core drill, core drill, diamond core bit, drill bit -Quantity: 9 pieces diamond drill bits -Price: complete -Condition see pictures -Core drill: Ø 2x40/1x50/5x60/1x85 mm -Length of the drills: 400 mm -Recording: Threaded recording -Weight: 12kg

Power cables, solar cables, fiber optic cables, fiber optic cables, data cables, LAN cables, fiber optic cables -Core cable: stranded wire 1 x 10 mm flexible, finely stranded -Length: 16 m -Dimensions roll: Ø 500 x 415 mm -Total weight: 16 kg

Description: Dual-purpose diamond core cutter, vertical and horizontal, drilling 15-155 mm, power supply 230 V, power 1800 W Approx. Onsite Dimension. (l x w x h): 300 x 600 x 400 mm, weight approx.: 20 kg