We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
used
Dry cleaner/ friction cleaner with 110 kW drive power. Throughput approx. 1 -2.5 t/h depending on type of plastic and material thickness
Press screw REG-MAC for drying foils and fibres, and for compacting foam (e.g. polystyrene, EPS) Drive motor 55 kw
Press screw REG-MAC for drying foils and fibres, and for compacting foam (e.g. polystyrene, EPS) Drive motor 55 kw
used
Profile granulator, with slanted trestle.
Profile granulator with inclined trestle
used
Profile granulator, with inclined trestle and hopper for plates.
used
Separation tank: parts in contact with the product in stainless steel, frame painted. kW: 6.0
used
Friction scrubber with stainless steel housing and stainless steel rotor. Drive motor 22 kW
used
Rotor diameter: 500 mm Rotor width: 1200 mm kW: 30
used
The plant is suitable for the agglomeration of thermoplastic films and fibers. Depending on the material, the throughput is between 500 kg – 1000 kg/h. The facility consists of: • Feed belt • Load-dependent control for the feed belt • Metal detection coil • HERBOLD granulator type SMS 45/100-H5-3 • pneumatic material transport to the storage silo Ce9vqix • Plastcompactor unit HV-70, which consists of storage silo feed auger, plastcompactor, central blower and cooling circuit • HERBOLD recutting mill type SML 45/100-S4-2 • Intensive cooling • Conveyor blower SZS II 630/200 • Screening machine • Undersize recirculation into the compactor silo • Material conveying type MFT with big bag station and automatic diverter to the on-site silo • Automatic exhaust air filter • Electrical circuit •Compressor.
used
Separating tank/ floating-sink tank, parts in contact with the product in stainless steel, frame painted. Motor: 6 kW
used
Used granulator Manufacturer: HERBOLD Type: SML 60/100-G3-2 Specifications: Drive power: 75 kW, 140 A 380 V, 50 Hz rpm: 1480 Machine weight: approx. 5,000 kg
used
Fine mill Disc diameter 500 mm Drive motor 55 kW With dosing chute and metal separator Optional suction, screening machine, control box Very well preserved
used
Fine mill Disc diameter 500 mm Drive motor 55 kW With dosing chute and metal separator Optional suction, screening machine, control box Very well preserved
used
Fine mill Disc diameter 500 mm Drive motor 55 kW With dosing chute and metal separator Optional suction, screening machine, control box Very well preserved
used
This Herbold grinding mill is in machine storage at Plastima Used Machinery. The machine is in good condition for its age and has been disconnected in working state. The machine is from 1986. – Brand : Herbold – Model: SMS 45/30-F9-3 – Year built: 1986 – Working hours : Unknown
used
Rotor 450 mm diameter x 580 mm width Semi-open rotor (new) with 5 rows of blades, newly mounted 2 stator knives Drive 45 kW Hopper for conveyor belt feeding
used
Rotor 450 mm diameter x 580 mm width Semi-open rotor (new) with 5 rows of blades, newly mounted 2 stator knives Drive 45 kW Hopper for conveyor belt feeding
used
Rotor 450 mm diameter x 580 mm width Semi-open rotor (new) with 5 rows of blades, newly mounted 2 stator knives Drive 45 kW Hopper for conveyor belt feeding
used
Multi-knife mill Rotor 500 mm diameter x 1000 mm width, housing with 6 rows of stator blades Granulator with high cutting sequence for fine grinding Drive motor 90 kW Typical applications are all cuttable materials such as pulp, paper, rubber, foam, etc.
used
Rotor 500 mm diameter x 1000 mm width, housing with 6 rows of stator blades Granulator with high cutting sequence for fine grinding Drive motor 90 kW Typical applications are all cuttable materials such as pulp, paper, rubber, foam, etc.
used
Rotor 500 mm diameter x 1000 mm width, housing with 6 rows of stator blades Granulator with high cutting sequence for fine grinding Drive motor 90 kW Typical applications are all cuttable materials such as pulp, paper, rubber, foam, etc.
used
Inlet: approx. 300 x 300 mm Rotor width: approx. 280 mm Rotor blades: 3 Stator knives: 2 Drive: 7.5 kW Double bevel cut With roller feeder, electrical control box and soundproofing box
used
Inlet: approx. 300 x 300 mm Rotor width: approx. 280 mm Rotor blades: 3 Stator knives: 2 Drive: 7.5 kW Double bevel cut With roller feeder, electrical control box and soundproofing box
used
Twin-shaft shredder Drive 37.50 kW
used
Inlet: 450 x 580 mm Rotor width: 600 mm Rotor diameter: 450 mm Rotor blades: 3 Stator knives: 2 Engine: 75 kW
used
Inlet: 450 x 580 mm Rotor width: 600 mm Rotor diameter: 450 mm Rotor blades: 3 Stator knives: 2 Engine: 75 kW
used
Inlet: approx. 600 x 580 mm Rotor width: approx. 600 mm Rotor diameter: approx. 450 mm Stator knives: 2 Rotor blades: 4
used
Inlet: approx. 600 x 580 mm Rotor width: approx. 600 mm Rotor diameter: approx. 450 mm Stator knives: 2 Rotor blades: 4
used
Inlet: approx. 600 x 580 mm Rotor width: approx. 600 mm Rotor diameter: approx. 450 mm Stator knives: 2 Rotor blades: 4