used HENDRIKS Motor Vessel Rotators

Storage number: 3590 CONTAINER ROTARY DEVICE Manufacturer: HENDRIKS, Type: 100 T Machines NR.: 06, Built: 2009 specifications: Size workpiece weight 100000 Kg Diameter 4800 mm Rolls slide. 700 mm Rolls width 480 mm Stepless rotations m/min Engine power 2 x 0.75 kw Drive rollers 1 pc Running rollers 1 pc Length: 3900mm (3700), Height: 1200 mm, Width: 1300 mm (900), Weight: 5000 kg

TURNING ROLLERS LAMBERT JOUTY CZ100 max load capacity 100 tons auto alignment good conditions, ready to work!

Welding Rotary Machine Right, left-hand rotation Variable speed Due to slight modification ( front wall partially out separating and attaching a adjustable roller support can also be drilled rods and e.g. cardan shafts Weld. VAT not deductible Please inquire with location and postcode.

Technical data: Max load: 60 to. Container diameter: 500-4000 mm Rotation speed: 130-850 mm / min Roll diameter: 400 mm Roll width: 210 mm

Technical data: 1 drive unit / 1 revolving unit maximum load 20 to. Roll diameter 470 mm Roll width 250 mm Drive unit dimensions 2800 x 1300 x 1600 mm Unit 2800 x 1100 x 1600 mm, running with dimensions

Robust, high-quality rotary device for cylindrical workpieces (boiler roller set) with polyurethane coated steel rollers, infinitely adjustable rotation speed, high frequency protected, right and left run, the largest load capacity of the two units together 10,000 kg, Workpiece diameter 200 mm to 3,000 mm, drive power 2 x 0.18 kW, drive rollers made of steel dia. 250 x 160 mm, rotation speed 80 – 1,200 mm/min, maximum temperature load capacity of the rollers up to 110° C, dimensions see illustrations, weight of the set (driven and non-driven unit together) approx. 270 kg

Workpiece weight: 0 kg Workpiece diameter maximum: 0 mm Workpiece diameter minimum: 0 mm Number of rolls: 0   MACH-id   3597 MAKE  Esab Pema Finland TYPE  60 TS YEAR   1997

Electric motor, electric motor SIEMENS three-phase motor, power motor type 3LE16012BB233GB4 Type V1 Size 225M Motor speed 1475 rpm. Power consumption 84 Ampere Motor power 45 kW Mains connection 400 Volt, 50 Hz. Shaft diameter 60 mm Shaft spigot length 140 mm Wedge groove width in the shaft 18 mm Flange diameter 450 mm Centering diameter 350 mm Pitch circle 400 mm- Flange motor with 8 mounting holes 18 mm Overall length Motor housing without motor shaft 715 mm Overall length Motor housing with motor shaft 855 mm Space requirement L x W x H 855 x 450 x 570 mm Net weight: 320 kg very good condition - New, unused from stock dissolution; used

Electric motor, electric motor LAMMERS three-phase motor, power motor type 1TZ95012AA434AB4-Z Type B3 Size 200L Motor speed 2960 rpm. Power consumption 54 Ampere Motor power 30 kW Mains connection 400 Volt, 50 Hz. Shaft diameter 55 mm Shaft spigot length 110 mm Wedge groove width in the shaft 16 mm- foot motor with 4 mounting holes 19 mm, hole spacing 315 x 300 mm Overall length Motor housing without motor shaft 620 mm Overall length Motor housing with motor shaft 730 mm Space requirement L x W x H 730 x 400 x 520 mm Net weight: 205 kg very good condition - New, unused from stock dissolution; used

Drive motor, DC servo motor LENZE type GFQUBT 112-22 Spindle motor, electric motor Series No. 0239398K Year of manufacture: 1993 Nominal power: 6 kW Operating voltage: 400 DC Nominal current: 18 amps Maximum speed: 1000 rpm. Excitation voltage: 210 VDC Excitation current: 3.4 amps Shaft diameter: 38 mm (shaft with 10 mm key)Shaft length: approx. 76 mm (shaft protrusion from centering edge) Centering flange diameter: 230 mm Bolt circle diameter: 264 mm, 4x 14 mm holes Longlife-speedometer HÜBNER type TDP 0.2 LT-4 Speedometer voltage: 60V / 1000 rpm Speed max. 9000 rpm External fan LENZE type GSD 160 Mains connection: 400 V, 50 Hz. 0.32 kW Overall length : 830 mm (without shaft and centering flange) Overall dimensions L x W x H: 920 x 300 x 460 mm Weight: 130 kg good condition; used

Material: 1.4301/ stainless steel Engine: 55 kW Content: 4600 ltr Weight: 4600 kg General overhauled. Equipment: - control cabinet - frequency converter variable 450 - 1450 rpm - filtering screen - discharge pump - working platform with stairway, base plate for 1 Euro-pallet, standard railing and grates. Very good condition, like new. You can also get the entire system with all components you need. Write us below!

Cat.-Nr. 11-3330 in a very good condition for Cosmetic and food stuff Max.Pressure 3 bar Double Jacket : 6 bar with agitator adjustable speed 160°C temperature resistant Manhole and sight glass with lighting CIP cleaning injection nozzles aso For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

Cat.-Nr. 11-3325 in a very good condition for Cosmetic and food stuff Max.Pressure 3 bar Double Jacket : 6 bar with agitator adjustable speed 160 °C Temperature resistant Manhole and Sight Glass with lighting CIP cleaning injection nozzles aso. For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

Choice of 3 x RENTEC n.v. (Belgium) steam heated autoclaves Internal dimensions: 3000mm dia x approx 2500mm long (inc. dished end and door), Working pressure 10 Bar, Hydraulic Bayonet type door Year of manufacture 1995 Drawings and documentation available. No controls or hydraulic unit for door (all 3 were running off 1 pump). In very good condition.

Stackable container Manufacturer GEMP and UDE inside polished Pharma Manhole diameter 450 mm Drain valve DN 80 Weight: 300 kg Number of pieces: 8 pieces available

1 sterilizable, vacuum proof Process Vessel, mobile for production from dairy, delicatessen, pharmaceutical and cosmetic products Manufacturer: Seitz-Werke GmbH, Germany Model: DB 170 FW Machine. No.: 2226 Content: 187 liter Material: Stainless steel V4A / 4571 polished Product area: pressure resistant up to 3 bar double jacket: 35,5 liter, pressure resistant up to 2 bar Tempering system: double jacket for heating and cooling working temperature: up to 133 C Dimension: 0,9 x 0,9 x 1,2 m Weight: 230 kg Technical condition: used, excellent, like new operating condition

Melting vessel with dosage. Manufacture: Kemwall Engineering ( UK ) Type: MV 4848 Year: 2001 Material: Stainless steel Melting chamber 20 liter Heat adjustable Weigher type dosage Weigher Sartorius 66813 This unit has been last used the cosmetics industry Available 2 pcs

Cat.-No. 13-0265, 13-0264 in very good condition No. 174/91 resistant to pressure 3 bar Jacket: 6 bar Speed control with agitator 160 ° C temperature resistant Manhole and sight glass illuminated TÜV certificate available! CIP cleaning nozzles, etc. The price applies to a container. All prices are ex works plus legal VAT Freight costs: After delivery Delivery: from D-97753 Karlstadt Karlsburg Subject to prior sale

Cat.-No. 13-0265, 13-0264 in very good condition No. 174/91 resistant to pressure 3 bar Jacket: 6 bar Speed control with agitator 160 ° C temperature resistant Manhole and sight glass illuminated TÜV certificate available! CIP cleaning nozzles, etc. The price applies to a container. All prices are ex works plus legal VAT Freight costs: After delivery Delivery: from D-97753 Karlstadt Karlsburg Subject to prior sale

Cat.-No. 13-0265, 13-0264 in very good condition No. 174/91 resistant to pressure 3 bar Jacket: 6 bar Speed control with agitator 160 ° C temperature resistant Manhole and sight glass illuminated TÜV certificate available! CIP cleaning nozzles, etc. The price applies to a container. All prices are ex works plus legal VAT Freight costs: After delivery Delivery: from D-97753 Karlstadt Karlsburg Subject to prior sale

Cat.-No. 13-0265, 13-0264 in very good condition No. 174/91 resistant to pressure 3 bar Jacket: 6 bar Speed control with agitator 160 ° C temperature resistant Manhole and sight glass illuminated TÜV certificate available! CIP cleaning nozzles, etc. The price applies to a container. All prices are ex works plus legal VAT Freight costs: After delivery Delivery: from D-97753 Karlstadt Karlsburg Subject to prior sale

Sugden Engineering Twin propeller Mixing Vessel. 200 L Stainless vessel, 2 top mounted paddle stirrers, Vessel 45 degree sloped base to outlet.

Vessel reverser in Exchange

Transmitting vessel with 2,000 l. gross content, inlet with pneumatic cone closure (incl. 1 spare cone), venting and outlet via pneumatic squeezing valves. Conveyor lines on the side of the building.

Pneumatic conveyor vessel with 2.000 l. gross capacity, pneumatically operated inlet cone (incl. one spare cone), pinching valves for vent and outlet. Without pipework.