We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
used
Table load: 12 to.
used
Faceplate speed level 1: 0.005 0.25 Faceplate speed level 2: 0.019 1.02
used
Technical data: Table load 40 to. Table diameter 3,330 mm Speed 0.01 0.2 U/Min. Voltage 400 V / 50 Hz Power 6 KW To the weight of the table 15. Dimensions L x W x H 5,600 x 2500 x 3,200 mm
used
Technical data: -Load capacity 300 kg -Faceplate diameter 500 mm -Faceplate in grid levels of tilt - rotation Electr. infinitely variable approx. 0-1.2 m / min -Sweat power 650 A -Drive 220 V / 0.09 kW -Table height in horizontal position approx. 650 mm -Re + reverse - space requirement approx. B H 800 x 650 X 700 mm -Weight approx. 180 kg
used
Technical data: -Load capacity 30 kg -Faceplate diameter 280 mm -Faceplate swivel - faceplate RPM elect. infinitely variable - re + Li - run -Foot switch -Transmission of welding current 300 A -Drive 220 V - table height in horizontal position 360 / 890 mm -mobile base -3 jaw Chuck -Space requirement approx. B 550 x H 890 x T 550 mm -Weight approx. 50 kg
used
Technical data: -max load capacity 3000 kg -Faceplate cross 1600 x 1600 mm -Faceplate cross extension tubes - faceplate cross mot. adjustable 0-90 / 135 ° - rotation infinitely variable 0,01-4 U/min -Right - + rotation control -Transmission of welding current approx. 500 A -400 V - table height in horiz drive. Position without stand approx. 1200 mm -Table height at horiz. Position with frame approx. 2200 mm -Space requirement approx. B H 1600 x 1200 + 1000 X 2400 mm -Weight approx. 2700 kg
used
Mot. Welding turning and tilting table Make: DEUMA Type: DK 5000 S Machines - No.: 6890 Built: 1992 Offer number: 19110 Technical data: - max. Load capacity 5000 kg - Flat discs 1800 x 1300 mm - Flat disc hydr. swivel 0 - 90 / 135 ° - Rotational movement infinitely adjustable approx. R&din - Right - + Left-hand drive controllable - Welding current transmission approx. 500 A - Drive 400 V - Table height at horiz. Position approx. 1450 mm - E. hand-held remote button - Space requirement approx. W 2000 x H 1450 x D 3100 mm - Weight approx. 4000 kg
used
Welding turning and tipping-positioning table Technical data: -Load capacity at horizontal position 15000 kg -Load capacity in vertical position 10000 kg -Planpauc diameter 1850 mm -Plane disc with crane support can be swivelled continuously -Rotary motion electr. infinitely controllable -Right-Link Run -Drive 400 V -Ft remote taster -Massea cables -Welding current transmission 500 A -Table height at horizontal position 1850 mm -Space requirements approx. B 2450 x H 1850/2300 x T 3000 mm -Weight approx. 6000 kg
used
Clamping device with 3 pcs claw box double acting to compensate for material elongation during welding or heat development by working process New condition of the three claw boxes with screwed-on Interchangeable plate jaw system and hardened screwed clamping jaws . Size : Claw box; approx. 50 cm x 25cm (box) x 15 cm movable support part: approx.31 x23 cm Alternate plates size approx. 31 x 23 cm x height from 18 to 23 cm Spindle adjustment path. approx. 130 mm , voltage by spindle with compression spring preload system Accessories: 6 sets of alternating plate jaws as good as new
used
Specifications: - max. Load capacity 10000 kg - Flat discs 1400 x 1400 mm - Flat disc hydr. swivel 0 - 90 / 135 ° - Rotary movement infinitely variable 0.05 - 1.2 rpm - Right - + left-hand running controllable - Welding current transmission approx. 500 A - Drive 400 V - Table height at horiz. Position approx. 2500 mm - E. handheld remote button - Space requirement approx. W 2000 x H 2500 x D 2700 mm - Weight approx. 5200 kg
used
Specifications: - max. Load capacity 750 kg - Face disc diameter 750 mm - Hollow continuous spindle 65 mm - Face disc motorically swivel 0 - 90 ° - Rotational movement electr. infinitely variable 0.05 - 2.0 m/min - Right - + Left - Run - E. – Foot switch + hand remote control - Welding current transmission approx. 500 A - Drive 400 V - Table height with horizontal position 1050 mm - 3. Cheek lining - Space requirement approx. W 1600 x H 1050 x D 1600 mm - Weight approx. 400 kg
used
Specifications: - Load capacity 100 kg - Face disc diameter 400 mm - Faceplate infinitely tiltable - Table height with horizontal position approx. 470 mm - Rotational movement electr. infinitely variable 0 - 2.5 m/min - Welding current transmission 400 A - Drive 400 V - Right - Left rotation - Foot switch with foot roller controller for speed regulation - Ground cable - Space requirement approx. W 700 x H 700 x D 600 mm - Weight approx. 100 kg
used
Offer 23093 Specifications: - Load capacity 2000 kg - Face plate diameter 1300 mm - Face plate can be swivelled up to 135 ° via geared motor - Rotary movement electr. infinitely variable - Footswitch for right-hand rotation - left-hand rotation - Welding current transmission 650 A - Drive 400 V - Table height in horizontal position 1360 mm - Space requirement approx. W 1600 x D 2200 x H 1360 mm - Weight approx. 2.0 t
used
Offer 23207 Specifications: - Load capacity 2500 kg - Face plate dimensions 750 x 750 mm - Face plate can be swivelled up to 135 ° via geared motor - Rotary movement electr. infinitely variable - Footswitch for right-hand rotation - left-hand rotation - Welding current transmission 650 A - Drive 400 V - Table height in horizontal position 1090 mm - Space requirement approx. W 1150 x D 1250 x H 1090 mm - Weight approx. 1.2 t
used
Offer 21270 Technical data approx.: - max. load capacity approx. 2000 kg - Face plate diameter 1500 mm - Hydraulically swivelling face plate - Rotary movement electric with right - + counterclockwise rotation - hydr. Height adjustment of the face plate - min./ max. table height in horizontal position -ca. 870 / 1940 mm - Drive 400 V - Space requirement approx. W 3000 x H 870 x D 1750 mm - Weight approx. 2500 kg
used
Brand: Eder & Müller Type: KT tilting table Year of construction: Description: Pneumatic swivel from horizontal to vertical position. Support grid extendable from 1500 - 2300 width and 1000 - 1600 height. Grooved rubber pad (original underneath or foam pads) Dimensions: Table length: 1500 - 2300 Table level: 920 mm Table width: 1000 - 1600 Weight: 90 KG
new
Up to 100 products can be produced on one table. • automatic or semi-automatic production lines; • EU-standard; • Warranty 24 months. The tables are made of sturdy steel construction covered with steel plate. The service life of vibrating tables is up to 30 years. Tables can be equipped with hydraulic tilt function, built-in heating pipes and vibrators. The sizes of the tables can be ordered for the required panel sizes. SUMAB equipment for the production of interior and exterior wall panels includes: • various types of circulating and tilting vibration tables • turnkey house-building plants; • the possibility of full or partial reconstruction of old enterprises and the installation of modern equipment; • profitability of production, reduction of economic and production costs; • the optimal solution to start panel construction of high-quality and modern hous ...
2 Gebr. Hydraulic Tilting Tables Dimensions table 1 : 14.50 x 4.50 m Dimensions table 2 : 14.00 x 4.20 m with holding bras for vibrators with 2 hydraulic rams.
used
approx. 4 – 5 pieces work tables, height adjustable - used - : Price ex location: 400.-€ (net), dismantled, packed and loaded! Manufacturer: Herbert Grüttner Type: Modulus Year of manuf.: unknown, height-adjustable – with motor Type 1 – 1 piece: Table top with semicircular cut-out Width: approx. 1.60m Width rear wall: approx. 1.30m Rear height: approx. 1,28m Total height rear: 1,90m Total height incl. luminaire: approx. 2.10m Depth: narrow side of the worktop: approx. 95cm Total depth of the table on the narrow side: approx. 1.05m Type 2 – 2 pieces: Table top approx. B: 2m x 1m Total height approx. 2,20m Type 3 – 1 piece: Table top approx. B: 1,60m x 0,75m Total height approx. 2,20m Type 4 – 1 piece: Table top approx. 0,90mm x 1,30m Condition: good Available: from the end of Oct./Nov. 2021 Location: Frankenberg warehouse (Saxony)
500 x 800 x 150 high, T-slot 18 mm 500 x 460 x 150 high, T-slot 18 mm
used
Single column faceplate welding rotating and swiveling device make TEHAG type SG 3Fabr. -No: 6555 built in 1974Technical specifications:Load capacity: 600 kgSwing arm torque max.: 810 kpmMaximum torque for the face plate: 140 kpmProjection: 1600 mmSwivel range: 360 °Swing speed: 0.06 - 1.2 rpmRotation speed: 0.7 rpmFaceplate size: 1100 x 1100 mmPower connection: 380 V, 50 HzControl voltage: 24 voltsDimensions L x W x H: 4000 x 1200 x 2200 mmWeight approx: 2500 kgwith- remote control- foot controllerused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Tilt & Turn Table Fabr. HEINRICHSGLÜCK Type KT 10Capacity: 100 kgFaceplate diameter: 650 mmFaceplate speed: 0.17 - 3.4 rpm.Tilt range: 135 °Dimensions: 720 x 650 x 750 mmWeight approx: 150 kgWith- Hand crankused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Welding and turning table make FÖRSTER type AE 1380Fabr. -No: 864409 Year 1999Table size: 3000 x 1500 mmDrive power: 3 kWused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Mot. Welding Turntable Fabr. HAMANNLoad capacity: 4.0 tClamping plate: 900 x 900 mmExternal dimensions approx: 1600 x 1400 x 1600 mmWith- Mot. tiltable- Footswitch- Stepless speed adjustment with potentiometerused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Welding turntable Fabr. UINION CARBIDE Type TT 300Fabr. -No: 88622 Year 1988Max. Load capacity: 300 kgSize of the three-jaw chuck: 250 mmPower connection: 230 V, 50 HzDrive power: 0.5 kWSwing motor: 0.18 kWDimensions L x W x H: 1000 x 1350 x 1000 mmWith- Footswitch- Rotational speed adjustable via potentiometerused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools