used HEILBRONN Decoilers

Tape straightening machine with feed roller pair, upper half hydr. foldable, roll width max. 320 mm, rollers 60 mm, otherwise see pictures

Eccentric press make HEILBRONN type EPT 6Fabr. -No: 4869, built in 1986Technical specifications:Pressure force: 6.3 tThroat: 130 mmTable size: 320 x 240 mmThrough hole in the table: 80 mmTable height: 800 mmMax. Installation height: 155 mmRam surface: 128 x 180 mmSlide adjustment: 30 mmStroke adjustment: 6 - 60 mmStroke rate: 180 H / minDrive power: 0.5 kWDimensions approx: 1000 x 1000 x 1800 mm mmWeight about: 500 kgWith- flywheel drive- Two-handed disengagement- Manual inlays 11062/11064- foot switch- Two-hand and single stroke- separate control cabinetused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Force of pressure: 100 t projection: 350 mm table size: 690 x 840 mm Durchfalloch in the table: 160 mm table adjustment: slide area: 450 x 600 mm slide adjustment: 80 mm stroke adjustment: 8-100 mm stroke rate: 60 / min drive motor: 380 V, 5.5 kW space: 1850 x 1850 x 2650 mm weight: 6800 kg

Top width 2000 mm Turning diameter over bed 600 mm Spindle bore about Ã?80 Bed width 430 mm Tailstock MK5 Chuck diameter 315 mm Weight approx. 8to 92. P2b9fy8n Control Bosch CC220 (recently renewed)

Pressure: 65 tons -Stroke: 140 mm -Table size: 720 x 600 mm -Plunger surface: 500 x 300 mm -Tappet adjustment: 80 mm -Strokes: 20-40 per min. -. Weight: 6000 kg -Dimensions (L x W x H): height 3.1 m -Clamping hole ø 60 x 80 mm More info on request

turning diameter over bed: 3600 mm turning diameter over slide rest: . mm turning length: 10500 mm total power requirement: 22 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

An inspection is possible.

Punching force: 75t, with Band Feeder GSW WV32/80, max. band width: 320mm, max. band thickness: 3.5mm, roller diameter: 80mm, an inspection is possible.

Pressure capacity: 500KN, stroke: 8-100mm, stroke rate: 100/min. Ram adjustment: 80mm, drive: 4kW, weight: 2850kg. Safety distance: 175mm, overtravel: 53mm, overtravel time: 110ms.

pressure: 100 t throat: 350 mm stroke: 8-80 mm dayligth: 300 mm no. of strokes: 125 Hub/min ram - range of adjustment: 80 mm ram surface: 400x300 mm table surface area: 850x700 mm hole in the table: 350x200 mm total power requirement: 7.5 kW weight of the machine ca.: 4.5 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Pneumatic gripper feed make HEILBRONN type PVS 250/100/80Machine -No: 205238 built in 1993with attached strip straightener type RLE 27Technical specifications:CLIP FEEDmax.strip width: 250 mmmax.strap thickness: 3.0 mmFeed length range: 5 - 105 mmmax. material cross-section: 240 mm²Clamping force of the feed clamp: 17.2 kNcorresponding to frictional clamping force: 34.4 kNClamp tension force: 5.6 kNcorresponding to friction clamping force: 11.2 kNFeed force: 3.0 kNTAPE straightenermax.strip width: 200 mmmax.strap thickness: 2.0 mmNumber of straightening rolls: 7Diameter of the straightening rolls: 40 mmNumber of feed rollers: 2Diameter of the feed rollers: 40 mmusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always avail ...

Pneumatic gripper feed make HEILBRONN type PVS 250/100/80Machine -No: 205238 built in 1993with attached strip straightener type RLE 27Technical specifications:CLIP FEEDmax.strip width: 250 mmmax.strap thickness: 3.0 mmFeed length range: 5 - 105 mmmax. material cross-section: 240 mm²Clamping force of the feed clamp: 17.2 kNcorresponding to frictional clamping force: 34.4 kNClamp tension force: 5.6 kNcorresponding to friction clamping force: 11.2 kNFeed force: 3.0 kNTAPE straightenermax.strip width: 200 mmmax.strap thickness: 2.0 mmNumber of straightening rolls: 7Diameter of the straightening rolls: 40 mmNumber of feed rollers: 2Diameter of the feed rollers: 40 mmusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always avail ...

Parallel Lathe WEISSER HEILBRONN Between points: 1100 mm Maxi Ø on bench: 440 mm Maxi Ø over saddle: 230 mm Cone: CM4 Spindle diameter: Ø 45 mm Spindle speed: from 45 to 2000 RPM TRIPAN Turret 3-jaws chuck Ø 200 mm Threadings: Metric + Whitworth Auto feeds longitudinal + transversal Lubricant pump Voltage: 380 V Dimensions (L x W x H): 2500 x 1300 x 1500 mm Weight: approx 2 T

Rotary indexing table with 12 stations Automatic ejector three pressing stages Pressure capacity 1,000 KN Stroke 12-120 mm Stroke rate 30-60 1/min Plunger adjustment 80 mm Total weight 9,500 kg

Lathe Speeds: 40 - 2000 rpm Tension - lead screw Distance between centers 1 m Center height 230 mm Length 2.50 m Width 1.20 m Height 1.60 m Multifix B recording Accessories Machine unchecked !!

pressure: 100 t throat: 350 mm stroke: 8 - 100 mm no. of strokes: 60 Hub/min daylight (stroke down, ram adjustment above): 300 mm ram adjustment: manuell 80 mm table surface area: 850 x 700 mm hole in the table: Dm. 180 mm mm ram surface: 560 x 400 mm ram drills x depth: 40 x 95 mm table height over floor: 850 mm total power requirement: 7,5 kW weight of the machine ca.: 8 t dimensions of the machine ca.: 1,4 x 2,2 x 2,85 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 500 mm turning diameter over slide rest: 250 mm turning length: 1200 mm turning diameter in the gap: mm turning speeds: 7,1 - 1400 U/min centre height: 250 mm spindle bore: 49 mm total power requirement: 7,5 kW weight of the machine ca.: 3,9 t dimensions of the machine ca.: 2,85 x 1,3 x 1,6 m Lead and feed spindle lathe - 3-jaw chuck 260mm - 4-fold steel holder - Coolant system The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Pressing force 50 ton Stroke 8 - 100 mm Max. stroke rate 140 strokes/min Drive power 3 kW Clamping surface 650 x 500 mm Machine weight approx. 2,750 kg

Very well preserved CNC lathe WEISSER Heilbronn, type Gigant. From precision operation, only ultra-fine machining. Details Type Gigant Machine No. 27-0166 hydraulically self-tightening fork art chuck with power clamping cylinder 4x Sauter revolver, size 400 mm2 Siemens SINUMERIK 840D fully functional Commissioning 04/2003 Travels X 725 mm (stroke), Z 1,480 mm Main spindle drive DC 45 kW (nominal power) Speeds in 3 stages up to max. 1,120 rpm a set of basic jaws inside/outside without Lynette (but can be provided for customization) incl. documentation

turning length: 2000 mm turning diameter: 1200 mm centre height: 600 mm control: Siemens Sinumerik 840D The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Eccentric press, single column press, punching machine, single column eccentric press, eccentric press, single column press -Manufacturer: Heilbronn, single column eccentric press type NEPD 50 -Pressure capacity: 50 tons -Clutch: pneumatic -Stroke: adjustable 8 - 100 mm -Table size: 500 x 650 mm -Table recess: Ø 240/100 mm -Projection: 255 mm -Punching fixture: Ø 40 mm -Insertion height 355 mm -Dimensions: 1800/1080/H2260 mm -Weight: 3050 kg

Key data: 75 t, 80 mm, 250 1/min

Pressing force: 75t Table: 650 x 560 mm Plunger area: 500 x 300 mm Stroke rate: 50-250 stroke/min Lifting height: 8-80 mm max. installation height: 400 mm Passage between the side stands: 300 mm Feeder: Manufacturer: GSW Type: WV32/80 Band width: max. 320mm Tape thickness: max. 3.5mm Roller diameter: 80mm

Description: SPECIFICATIONS Character: White Heilbronn Type: Gigant Distance between centers: 2,500 mm Height between centers: 530 mm Turning diameter above the bed: ø1,060 mm Turning diameter above the base: ø700 mm Door outlet: ø102 mm Specs 3-claw chuck 4-jaw chuck Brand 4-claw: Forkardt PSA900 weight approx.: 10,000 kg, Approx. Onsite Dimension. (l x w x h): 5,000 x 2,300 x 2,100 mm

pressure: 160 t throat: 440 mm stroke: 20-150 mm : 50 Hub/min : ca. 390 mm : 1300 x 750 mm : 170 mm : 400 / 250 mm : 50 mm : 445 x 560 mm : 7,5 kW : 8 t : 2,9 x 1,5 x 2,8 m total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Description: Machine number: 4717 Feed size: 500 x 3 mm Belt infeed height (with plate): 170 - 270 mm Additional device: 2-hand operation Table size: 1250 x 900 mm Plunger surface (blue): 800 x 600 mm Projection of ram center dimension stand: 510 mm Installation height center dimension (without plate): 500 mm Clamping plate thickness: 125 mm Trunnion Ø: 65 mm Smallest / largest stroke: 27 - 140 mm Number of strokes: 48 With electronic roller feed: Wanzke WVS 500 Indramat control system, serial no. 102414-1, year of manufacture 1998 With reel straightener: PBK RMC4 80/7/50 RSD GLST, serial no. BA00967, year of manufacture 2006 With minimum quantity lubrication: , Schmidt System 2000 Max. pressing force: 250 to, weight approx.: 10,000 kg, Approx. Onsite Dimension. (l x w x h): 2,250 x 3,200 x 3,500 mm