used H Guillotine Shears

Key data: 3100 mm, 6 mm

HACO TS 3006 hydraulic guillotine shears manufactured in Belgium in 2006, are used in manufacturing plants to cut steel sheets with a maximum length of 3100 mm and a thickness of 6 mm. The machine has vertically aligned knives with four cutting edges, which ensure high precision and quality machining of workpieces regardless of the thickness and type of sheet. The angle of the cutting knives and the gap between them are adjusted by means of two levers at the rear of the machine. During machining, the workpiece is pressed against the cam in order to take an accurate measurement on the gauge located between the front stop and the bottom knife. Two parallel hydraulic cylinders drive the cutting bar (the upper knife attached to the slider) to perform the movement in the up-down direction. The HACO guillotine shears are offered with equipment which includes a foot control, a modern HACO SP ...

HSK - Guillotine shears with motor drive: - Engine: Dietz 380-3-50, 2.2 kW - D. Stroke rate 100 p.min - Weight approx. 700 kg - Drive via brake motor - Cutting triggering via movable foot switch - Scissor table with support table widened to approx. 600 mm - Side stop TA 500 with scale - Rear width stop ZA 500 in foldable design - Manual adjustable. For long sheets, stops can be placed upwards. - Fully installed and ready to use Additional: Pneum. Hold

Hydr. Swing cut guillotine shears HERA type HSS III Fabr. No. 598 Year of manufacture 1986 Cutting length 3100 mm Cutting thickness 3 mm Column projection 200 mm Knife strokes 25 strokes/min. Mains connection 380 volts, 50 Hz motor power 3 kW - motorized adjustable back gauge 1070 mm - actual value digital display for the back gauge - cutting gap adjustment - cutting length adjustment - front side gauge left 1000 mm - 4 sheet metal support arms 1000 mm - el. Foot switch Space requirement without sheet metal support arms L x W x H 3630 x 2200 x 1600 mm Weight approx. 4000 kg good condition; used

Sheet thickness: 6,00 mm Sheet width: 2000 mm Depth rear gauge: 0 mm Maximum sheet thickness:    6 - 4 mm Max. cutting length:        2.060mm Strokes on full length:     30mm Strokes in short 1000 length:55 Cutting angle:              1,20 ° Length backgauge:           1.000mm Number of down holders:     9 Power:                      7,5 kW Length:                     2.150 mm  Width:                      1.750 mm  Height:                     1.700 mm  Weight:                   ...

Sheet thickness: 12,00 mm Sheet width: 3000 mm Depth rear gauge: 1000 mm MACH-id    5484 MAKE         HACO TYPE           HSL 3012 YOP             90 er SPECIFICATIONS Maximum sheet thickness         12 mm Max. cutting length                    3100 mm Strokes on full length                 17 mm Strokes in short 1000 length       21 Cutting angle      0,5 - 3 ° Length backgauge        0 - 1000 mm Number off down holders        18 Approach speed         50 mm/sec. Power          15 kW DIMENSIONS  Length  &n ...

Sheet thickness: 4,00 mm Sheet width: 1500 mm Depth rear gauge: 0 mm Make Haco 4 mm Type SST 1504 Year 2002 SP8 Robosoft Haco schaar Sheet thickness (mm)T = 4 mm Sheet width (mm) L = 1.500 mmDepth rear gauge (mm)Swing beam Back stop 750 mm

Sheet thickness: 6,00 mm Sheet width: 3050 mm Depth rear gauge: 750 mm Make Haco 3000 x 6 Type TS 306 Year 2000 haco schaar plaatschaar hydraulic guillotine Sheet thickness (mm) T = 6 mm Sheet width (mm) L = 3.050 mm Depth rear gauge (mm) D = 750 mm

Specifications: - working width 3100 mm - max. cutting capacity St 40 8 mm - Engine backgauge 10 - 750 mm - front angle stop - Stroke rate up to 30 per min - Drive 400 V / 2 x 6.5 kW - Space requirement incl. backgauge, without front support arms - approx. W 4250 x H 1500 x D 2450 mm - Weight approx. 11000 kg

Haco HSL 3100 x 16 mm Cutting length: 3100 mm Max sheet thickness st 45: 16 mm Strokes/min: 5 > 10 str/min Backgauge: 1000 mm Adjustable cuttingedge: 0,5 - 4°30´ Electric motor (power): 37,5 kW Length: 4160 mm Depth: 2220 mm Height: 2450 mm Weight: 15 ton

Haco TS 3100 x 12 mm Cutting length: 3100 mm Max sheet thickness st 45: 12 mm Strokes/min: 7 > 17 str/min Adjustable cuttingedge: 0,5 > 3° Electric motor (power): 22 kW Length: 4240 mm Depth: 1900 mm Height: 2100 mm Weight: 10 ton

Haco TS 3100 x 6 mm Cutting length: 3100 mm Max sheet thickness st 45: 6 mm Passage between uprights: 3050 mm Strokes/min: 12 > 32 str/min Backgauge: electric Adjustable cuttingedge: 0,5 > 3° Electric motor (power): 7.5 kW Length: 3480 mm Depth: 1500 mm Height: 1800 mm Weight: 4,5 ton

SC7 CNC control: - backgauge - knife play - cutting angle Foldable backgauge Cutting length: 3100 mm Max sheet thickness st 45: 13 mm Strokes/min: 9 > 17 str/min Backgauge: CNC SC7 Adjustable cuttingedge: 0,5 > 3° Electric motor (power): 22 kW Length: 4030 mm Depth: 2200 mm Height: 2250 mm Weight: 9,5 ton

SC 70 CNC control: - cutting angle automatic - knife play automatic - backgauge automatic Cutting length: 3100 mm Max sheet thickness st 45: 8 mm Max sheet thickness inox: 4 mm Strokes/min: 11 > 22 str/min Backgauge: CNC - 750 mm Adjustable cuttingedge: 0,5 - 3° Electric motor (power): 11 kW Length: 3950 mm Depth: 1750 mm Height: 1720 mm Weight: 5 ton

: gebraucht : 1995 : 9643 : prompt, Zwischenverkauf v : Türkei : 19700 € : 1 : 3100 mm : 6 mm : 1000 mm : 15 kW : 200 l : 3650 mm : 2250 mm : 1830 mm : 5600 kg Swing cut version mot. Backgauge range 1000 mm with Elgo digital display Section column setting 1 Side stop 1000 mm withDimensional scale 2 support arms Foot pedal Rear protective grids with light barriers Cutting line illumination Cut number: 19 1/min Knives were resharpened User Manual in German CORRESPONDS TO THE GERMAN UVV AND THE AUSTRIAN AMVO The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2023 : 9679 : prompt, Zwischenverkauf v : Türkei : 15000 € : 1 : 2050 mm : 3 mm : 35 1/min : 550 mm : 3 kW : 2 Stk. : 850 mm : 400 mm : 2600 mm : 1350 mm : 1260 mm : 1280 kg manualback gauge automatic sheet hold down hold down with rubber pads moveable foot switch side lay 2 supporting arms light barriers on the back of the machine user manual in GERMAN and ENGLISH (sample photo shows mod. MS 1303) OPTION: mot. back gauge with touch screen control DT5 € 3.630,-- (delivery time approx. 12 weeks) WE HAVE MORE THAN 330 REFERENCES! The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2023 : 9692 : Mai 2023, Zwischenverkauf : Türkei : 42300 € : 3100 mm : 6 mm : 4 mm : 14 1/min : 1.5 ° : 14 : 8.5 to : 750 mm : 120 mm/s : 11 kW : 170 l : 880 mm : 500 mm : 3750 mm : 1950 mm : 2770 mm : 1650 mm : 5550 kg linear guided machine with fixed cutting angle NC-preselection system D-Touch 5 with Touch-Screen for back gauge,cutting length, quantity with USB port motorical back gauge 750 mm onlinear ball screws,folding upwards control panel at the left machine side hydraulic hold down pistons are arrangedclose to the cutting edge foot switch manual blade gap adjustment on left and right side table with balls piece counter single and continuous stroke finger protection 1 squaring arm 1. 000 mm with scale,T-slot and tilting cam 2 supporting arms 1.000 mm withT-slot and tilting cam variable adjustable cuttinglength for economic processing Upper and lower knife 4-fold rever ...

: neu : ca. 12 Wochen ab Auftrags : Türkei : 13500 € : 1350 mm : 3 mm : 35 1/min : 550 mm : 3 kW : 2 Stk. : 850 mm : 400 mm : 1900 mm : 1350 mm : 1260 mm : 1060 kg manualback gauge automatic sheet hold down hold down with rubber pads moveable foot switch side lay 2 supporting arms light barriers on the back of the machine user manual in GERMAN and ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 42300 € : 2500 mm : 6 mm : 4 mm : 15 1/min : 1°50’ ° : 12 : 8.5 to : 750 mm : 120 mm/s : 11 kW : 150 l : 880 mm : 500 mm : 3300 mm : 2615 mm : 1650 mm : 4940 kg : 125 mm linear guided machine with fixed cutting angle NC-preselection system D-Touch 5 with Touch-Screen for back gauge,cutting length, quantity with USB port motorical back gauge 750 mm onlinear ball screws,folding upwards control panel at the left machine side hydraulic hold down pistons are arrangedclose to the cutting edge foot switch manual blade gap adjustment on left and right side table with balls piece counter single and continuous stroke finger protection 1 squaring arm 1. 000 mm with scale,T-slot and tilting cam 2 supporting arms 1.000 mm withT-slot and tilting cam variable adjustable cuttinglength for economic processing Upper and lower knife 4-fold reversible oilf ...

: neu : 2023 : 9678 : prompt, Zwischenverkauf v : Türkei : 44700 € : 1 : 3100 mm : 6 mm : 4 mm : 50 mm : 15 1/min : 1,5 ° : 16 : 14 to : 1000 mm : 200 mm/s : 15 kW : 200 l : 2 Stk. : 865 mm : 500 mm : 3515 mm : 4110 mm : 2200 mm : 3700 mm : 2100 mm : 7650 kg Swing cut construction NC-preselection system D-touch 7 with touch screen for back gauge, cutting length, quantity, USB port Motorized back gauge 1000 mm on ball screws, folding upwards Clear control panel mounted on moveablearm Hydraulic hold down pistons are arrangedclose to the cutting edge Foot switch Central, manual blade gap adjustment Cutting line illumination Broad table with balls Piece counter Single and continous stoke Fold up finger guard 1.000 mm 1 squaring arm 1. 500 mm with scale,T-slot and tilting cam 2 supporting arms 1.000 mm with T-slot Simple replacement and grinding of theblades Variable adjustable cuttinglen ...

CNC backgauge manual knife play adjustment Cutting length: 3100 mm Max sheet thickness st 45: 6 mm Strokes/min: 12 -> 32 str/min Electric motor (power): 7.5 kW Length: 3480 mm Depth: 1500 mm Height: 1800 mm Weight: 6,2 ton

: gebraucht : 2022 : 9665 : prompt, Zwischenverkauf v : Türkei : 3500 € : 1 : 1250 mm : 1.5 mm : 500 mm : 2250 mm : 1000 mm : 1150 mm : 460 kg welded steel construction with manual hold down unit back gauge adjustable by handwheel users manual in ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : 2022 : 9663 : prompt, Zwischenverkauf v : Türkei : 3100 € : 1 : 1020 mm : 1.5 mm : 500 mm : 1950 mm : 1000 mm : 1150 mm : 420 kg DEMO MACHINE, MINT CONDITION welded steel construction with manual hold down unit back gauge adjustable by handwheel users manual in ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : 2022 : 9613 : prompt, Zwischenverkauf v : Türkei : 24100 € : 1 : 1 : 3100 mm : 4 mm : 42 1/min : 750 mm : 7.5 kW : 2 Stk. : 800 mm : 450 mm : 3700 mm : 2300 mm : 1350 mm : 3730 kg DEMO MACHINE - MINT CONDITION mot. back gauge with digitalreadout DT 5 hold down with rubber pads side lay with T-sluts 2 supporting arms ball in the table tape measure tilt stop light barriers on the back of the machine cutting line illumination user manual in GERMAN and ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Machine has been tested.