We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
used
FIS stirred tank 500 liters Manufacturer unknown, boiler is double-walled and can be heated, in a good used and functional condition. The device runs on 400 volts, completely stainless steel, workshop tested, immediately ready for use, Dimensions W/D/H 130/9100170 cm more on request.
used
Used 4500 Litre / 990 Gallon, Vertical, Stainless Steel 316, storage / mixing, tank / vessel Manufacturer: William Fairclough & Co ltd Connections: TOP 1 x Oval Manway 410x550 2 x 2" ISS Male, Inlets 1 x 6" Sight Glass SIDE 1 x 4" ISS Male Overflow 1 x 4" ISS Male Anti-Vac. 1 x ¾" BSP Socket, Sample 1 x 1" BSP Socket, Level BASE 1 x 4" ISS Male, Outlet. Mixer Mount still Exists, although Shaft Entry has been welded blank. Tank supported on 4-Off tapered, box section Legs.
used
Used 5000 litre / 1100 gallon / 30 Barrel, Vertical Stainless steel Mixing Tank / Vessel Manufacturer: WILLIAMS, FAIRCLOUGH & CO LTD Connections: TOP 1 x Oval, Top Manway 550 x 410 1 x 6" Sight glass 2 x 2" ISS Male, Inlet 1 x mixer Mixer Details: D J Osbourne Model 111 1425-260 Rpm SIDE 1 x ½" BSP Socket, Sample. BASE 1 x 1¼" Table D Flange, Probe. 1 x 2½" ISS Male, Outlet Sloping concave base supported on 4-Off, tapered box section legs with feet.
used
Used 5000 litre / 1100 gallon / 30 Barrel, Vertical Stainless steel Mixing Tank / Vessel Manufacturer: WILLIAMS, FAIRCLOUGH & CO LTD Connections: TOP 1 x Oval, Top Manway 550 x 410 1 x 6" Sight glass 2 x 2" ISS Male, Inlet 1 x mixer Mixer Details: D J Osbourne Model 111 1425-260 Rpm SIDE 1 x ½" BSP Socket, Sample. BASE 1 x 1¼" Table D Flange, Probe. 1 x 2½" ISS Male, Outlet Sloping concave base supported on 4-Off, tapered box section legs with feet.
used
Used 18000 Litre 3960 Gallon Vertical Plastic Storage Tank Manufacturer: FORBES Connections TOP 1 x Ø600 Top Manway (bolted) 1 x 3” Flange, Inlet 1 x 4” Flange, Inlet SIDE 1 x Ø450 Side Manway (bolted) 1 x 3” Flange, Outlet 1 x 4” Flange, Outlet 1 x 1” Flange, Outlet Vessel supported on a constructed flat base with internal slope.
used
Used 18000 Litre 3960 Gallon Vertical Plastic Storage Tank Manufacturer: FORBES Connections TOP 1 x Ø600 Top Manway (bolted) 1 x 3” Flange, Inlet 1 x 4” Flange, Inlet SIDE 1 x Ø450 Side Manway (bolted) 1 x 3” Flange, Outlet 1 x 4” Flange, Outlet 1 x 1” Flange, Outlet Vessel supported on a constructed flat base with internal slope.
used
Used 16000 Litre 3520 Gallon Vertical Plastic Storage Tank Manufacturer: FORBES Connections TOP 1 x Ø600 Top Manway (bolted) 1 x 3” Flange, Inlet 1 x 4” Flange, Inlet SIDE 1 x Ø450 Side Manway (bolted) 1 x 3” Flange, Outlet 1 x 4” Flange, Outlet 1 x 1” Flange, Outlet Vessel supported on a constructed flat base with internal slope. Insulated (80mm) and clad in riveted plastic sheet. Vessel supported on a constructed flat base with internal slope.
used
Used 16000 Litre 3520 Gallon Vertical Plastic Storage Tank Manufacturer: FORBES Connections TOP 1 x Ø600 Top Manway (bolted) 1 x 3” Flange, Inlet 1 x 4” Flange, Inlet SIDE 1 x Ø450 Side Manway (bolted) 1 x 3” Flange, Outlet 1 x 4” Flange, Outlet 1 x 1” Flange, Outlet Vessel supported on a constructed flat base with internal slope. Insulated (80mm) and clad in riveted plastic sheet. Vessel supported on a constructed flat base with internal slope.
used
Used 10700 litre / 2354 gallon (Gross) Vertical Stainless Steel Flat Sloping Base Mixing Storage Tank / Vessel - Stock Ref: CB3310D Manufacturer: VAAHTO (Finland) Connections: TOP 1 x (500x400) Top Access with Hinged Lid 1 x 4” Lap Flange 1 x Top Centre Mixer Entry Point ( No Mixer Currently fitted) SIDE 1 x 4” Lap Flange on 90° elbow, Overflow 1 x 3” Pad, inlet 1 x 2” Ball Valve with cut tube in Outlet BASE 1 x 3” Cut Tube ‘Slip-Fit’ Outlet Mild Steel Mixer Support (box section) bridge supported on stainless steel uprights from tank. Tank is supported on a flat sloping base.
used
Used 10700 litre / 2354 gallon (Gross) Vertical Stainless Steel Flat Sloping Base Mixing Storage Tank / Vessel - Stock Ref: CB3310B Manufacturer: VAAHTO (Finland) Connections: TOP 1 x (500x400) Top Access with Hinged Lid 1 x 4” Lap Flange 1 x Top Centre Mixer Entry Point ( No Mixer Currently fitted) SIDE 1 x 4” Lap Flange on 90° elbow, Overflow 1 x 3” Pad, inlet 1 x 2” Ball Valve with cut tube in Outlet BASE 1 x 3” Cut Tube ‘Slip-Fit’ Outlet Mild Steel Mixer Support (box section) bridge supported on stainless steel uprights from tank. Tank is supported on a flat sloping base.
used
Used 10700 litre / 2354 gallon (Gross) Vertical Stainless Steel Flat Sloping Base Mixing Storage Tank / Vessel - Stock Ref: CB3310A Manufacturer: VAAHTO (Finland) Connections: TOP 1 x (500x400) Top Access with Hinged Lid 1 x 4” Lap Flange 1 x Top Centre Mixer Entry Point ( No Mixer Currently fitted) SIDE 1 x 4” Lap Flange on 90° elbow, Overflow 1 x 3” Pad, inlet 1 x 2” Ball Valve with cut tube in Outlet BASE 1 x 3” Cut Tube ‘Slip-Fit’ Outlet Mild Steel Mixer Support (box section) bridge supported on stainless steel uprights from tank. Tank is supported on a flat sloping base.
used
Used 4910 Litre / 1080 gallon Vertical Stainless Steel jacketed, Insulated, welded clad Mixing tank / vessel Manufacturer: APV (no further details) Connections TOP 1 x Ø450 Top Manway 1 x Pad Mounted Mixer (top centre) 2 x 1½” RJT male CIP with sprayheads 1 x ø140mm vent with Lid 1 x 3” RJT male inlet 1 x 4” Tri-clamp ferrule 4 x 1 ½” Jacket flanges SIDE 1 x Temperature probe BASE 1 x 2” reduced to 1½” RJT female (Positioned off centre) Tank Insulated approx. 80mm complete with welded S/S cladding on top and shell, with a Mild steel external base. Tank is supported on 6-off extended stainless tube legs
used
Used 4086 litres / 900 gallon Vertical GRP Tank / Vessel – Stock Ref: CB3737b Manufacturer: Forbes Connections TOP 1 x 500 diameter Bolted Manway 2 x 3" Flange Inlet SIDE 2 x 1" Sandwich Fitting BASE 1 x 1½" Flange Outlet 1 x 1" Flange Outlet Plastic tank supported on a S/S Frame of support ring complete with tube legs & bracing tubes.
used
Used 4086 litres / 900 gallon Vertical GRP Tank / Vessel – Stock Ref: CB3737b Manufacturer: Forbes Connections TOP 1 x 500 diameter Bolted Manway 2 x 3" Flange Inlet SIDE 2 x 1" Sandwich Fitting BASE 1 x 1½" Flange Outlet 1 x 1" Flange Outlet Plastic tank supported on a S/S Frame of support ring complete with tube legs & bracing tubes.
used
Used 4086 litres / 900 gallon Vertical GRP Tank / Vessel – Stock Ref: CB3737c Manufacturer: Forbes Connections TOP 1 x 500 diameter Bolted Manway 2 x 3" Flange Inlet SIDE 2 x 1" Sandwich Fitting BASE 1 x 1½" Flange Outlet 1 x 1" Flange Outlet Plastic tank supported on a S/S Frame of support ring complete with tube legs & bracing tubes.
used
Used 4086 litres / 900 gallon Vertical GRP Tank / Vessel – Stock Ref: CB3737c Manufacturer: Forbes Connections TOP 1 x 500 diameter Bolted Manway 2 x 3" Flange Inlet SIDE 2 x 1" Sandwich Fitting BASE 1 x 1½" Flange Outlet 1 x 1" Flange Outlet Plastic tank supported on a S/S Frame of support ring complete with tube legs & bracing tubes.
used
Used 10700 litre / 2354 gallon (Gross) Vertical Stainless Steel Flat Sloping Base Mixing Storage Tank / Vessel - Stock Ref: CB3310C Manufacturer: VAAHTO (Finland) Connections: TOP 1 x (500x400) Top Access with Hinged Lid 1 x 4” Lap Flange 1 x Top Centre Mixer Entry Point ( No Mixer Currently fitted) SIDE 1 x 4” Lap Flange on 90° elbow, Overflow 1 x 3” Pad, inlet 1 x 2” Ball Valve with cut tube in Outlet BASE 1 x 3” Cut Tube ‘Slip-Fit’ Outlet Mild Steel Mixer Support (box section) bridge supported on stainless steel uprights from tank. Tank is supported on a flat sloping base.
R26107/09 FISCHER & KRECKE Two-sewn flat bag machine Model: Perfect Built: 60s available: immediately Bag width: 80 - 200 mm Bag length: 160 - 480 mm 4-colour printing unit Available: immediately
used
Type: RHS 1 U 200 GR 360, Y&cams: 1995, engine: Loher, 4,500 rpm / 5.5kW, on base frame, with suction and pressure bellows and 7 vibration dampers.
used
Tensile testing machine for plastics, textiles, etc., type Z 653, built 1974, measuring range: 0 - 50 kp / 0 - 500 N. Pulling speed: 25 - 500 mm /min.
used
designed for powder, made by stainless steel, with pneumatic filter cleaning, with external suction blower, function tested
used
folder Creaser adhesive machine Double fold head, 1 for perforation use as an option 3 Foldable Pockets + Gate Folds Adhesive system Format 50x100cm up to 480 grams Machine very suitable for covers with flaps, heavy bearing gate folding brothel etc. optional bag foldable possible MHGraphics is a Fidia dealer. We organize installation and instruction of trained mechanic Verf Gbar: immediately / Instant
used
480 x 320mm; 30,000 c/h; 4 x MID-WS unwinding stations; 4 X ZHF (Siguture systems); SLT station (card glue device); SHT (Gatherer Stitcher Drum); UTR delivery station; UTR-SNT gripper track; UTR SHT Delivery Station; SNT (trimming drum); UTR SNT Transfer Station; UTR-SNT gripper track carry unit UTR-SNT delivery station; missing copy delivery station (UTR); EP station; VP station; HP station ETR insert drum. Opition 2: Mid AWS (relax station); ZF SHT Feeder; UTR gripper track on 4X RAB insert feeder; 4 x VSS stations; Gripper to follow TO VP station-to ETR insert drum Still in operation: No Verf Gbar: Immediately
used
Type: Pipeline Model 63, magnet separator for removing iron from ceramic chippings etc., input: 380/220/115 V, output: 24 V / 7.5 A (transformer built-in), 2.4 to./h.
used
Farrel Pomini model F620 Banbury internal mixer, net mixing chamber volume: 710 litres Machine number 6515. Original year of manufacture: 1972, but body replaced 1998 approx batch weight at SG 1 - 533kg, 4 wing rotors, drilled sides, fully stellite welded chamber, rotors and floating weight, S.S.A. dust seals, hydraulic drop door with linear actuator, pneumatic hopper, unidrive gearbox with 2 x CEM 1475kW, 1550A, 1000V, 800/1000rpm DC variable speed motors, Drive controls included, but operator controls not available. In good condition (only used for tyre compound masterbatch). Spares available: Door top (new), hinge shaft (new), 2 x dust seals, hopper seals and bearing seals.