used GUILLIET Spindel moulders

Key data: 4 , 220 , 120

Guiliet Profilier and Hobelautmat with Wepla heads Model: 220 KXR 220 Year built:1990 Condition: very good (used) MAX CROSS-SECTION 220 X 120 MM MIN CROSS-SECTION 30 X 6 MM ENTRANCE TABLE 2000 MM long. PLANING SHAFTS 40 MM Dressing shaft 5.5 kW right and left planing shaft combined 5,5kW Thickness planer shaft 5.5 kW WEIGHT APPROX. 1600 KG Cleaned, maintained and functionally tested. If necessary, we can gladly offer planing heads with continuous cutting edges.

Compact four-sided planing machine Guilliet KXR for four-sided planing of wood., spindle: 4, working width: 180 mm, working height: 120 mm, spindle 1: Bottom / 3.7kW / 30mm, spindle 2: Right / 3.7kW / 30mm, spindle 3: Left / 3.7kW / 30mm, spindle 4: Top / 5.5kW / 30mm, Dressing table length: 2.100 mm, feed: 6 and 12 m/min., Set of planing heads: Yes

working width: 180 mm; working height: 120 mm; working spindles: 4; spindle following: down, right, left, up; motor power spindle down: 3,7 kW; motor power spindle right: 3,7 kW; motor power spindle left: 3,7 kW; motor power spindle up: 5,5 kW; adjustment spindle down: -; adjustment spindle right: -; adjustment spindle left: manual; adjustment spindle up: electric; cutter heads: turn cutter; feed speed: 2; feed pressure: feather; current consumption: 38 A; motor brake: automatisch; suction connection: machine length: machine width: weight:

Description: • Spindle moulder • Serial number 3483 • Motor power 5.50 KW • 4 rotation speeds: 3000/5000/6000/8000 rpm • Spindle diameter 50 mm, useful spindle length approx. 170 mm, spindle stroke approx. 180 mm, manually adjustable milling spindle height • Table size 1110 x 720 mm • Working height from the floor 850 mm • Maximum tool diameter under table approx. 150 mm Approx. Onsite Dimension. (l x w x h): 1,150 x 950 x 1,450 mm, weight approx.: 500 kg

spindle moulder with tilting shaft SAC SUERI TS 145 second hand machine electric shaft inclination -5 ° / + 45 ° electric mast lifting extended plans support extension motor power Hp 7,5 n.5 shaft rotation speed electrical inversion of the direction of rotation shaft diameter mm. 35 volt. 380/50

Facilities: - Aigner Integral Stop - Feed apparatus (3 rolls) - manual foot brake - Height adjustment by hand wheel - Aigner table extension

Spindle moulder SCM model T130N: – 1200 x 730 mm worktop – FAST sector plan, instead of rings – shaft D=35mm – Motor power kw 5,5 / HP 7,5, volt 380 – 5 shaft rotation speeds: 3000/4500/6000/7000/10000 rpm – adjustable spindle moulder cap – complete with 3-wheel driver Machine according to CE regulations

Spindle tenoning machine SCM T130 Motor power 7,5kw Machine control from puplite Electric spindle setting Sidecar for trunnion Total spindle height 200mm Spindle diameter 40mm Variable rotation on the belt Spindle speed 3000/4500/6000/7000/10000rpm CE Certificate Extraction nozzles 2x120mm

Technical data (subject to change) spindle for cutter mandrels MK5 Adjustment of the spindle height by handwheel Table opening can be adjusted via insert rings Speed change via belt reassignment (3,000 / 4,500 / 6,000 / 9,000 rpm) Brake by foot pedal Weight approx. 600-700 kg

Frezarka górnowrzecionowa Samco ROUTER Spindle distance from arm 800 mm Spindle driving motor 3/2.2 kw Two spindle speeds 9000/18000 RPM Spindle tilt angle adjustment 45-045 degree Height-adjustable table Spindle control pneumatically from the pedal Worktop size 800×600 mm

Cast iron spindle moulder saws with: - side trolley for tenoning, on pole and with flag support, with tilting guide and useful stroke of about 1500mm - Saw unit for tenoning - Spindle moulder hood with AIGNER guides - with 3-wheel drive Machine not according to CE standards, for export AVAILABILITY FROM APRIL 2024

Griggio TC200 spindle moulder with carriage Spindle diameter 35mm Spindle total height 190mm Longitudinal carriage in the worktop Carriage length 1100mm Left and right spindle rotations Spindle speed variable on belts Spindle RPM: 3000/4500/6000/8000/1000 4kw main motor Manual spindle lifting with crank Extraction pipes 2x120mm Dimensions of the machine 120x90x125cmH 500kg

Spindle moulder Griggio T220 Spindle diameter 35mm Spindle total height 150mm Spindle speed variable on belts Spindle RPM: 3000/4500/6000/8000/1000 5.5kw main motor Manual spindle lifting with crank Four-roller feed Europa 440 Extraction pipes 2x120mm Dimensions of the machine 120x90x125cmH 500kg

Spindle moulder Casolin F45L Spindle diameter 40mm Spindle total height 220mm Electric spindle height adjustment Electric spindle tilt angle adjustment +45/-10 Spindle speed adjustable 3000/4500/6000/8000/10000r.p.m 5.5kw main motor Aigner fences Extraction pipes 2x120mm Dimensions of the machine 265x130x180cmH Weight 980kg CE Certified

Turning Diameter 400 mm Turning Lenght 650 mm With C ,Y axes and subspindle Control Unit Fanuc 31i Can be inspected under power

Stock Number: 3780 CNC LATHE Manufacturer: EMCO, Type: HYPERTURN 665 MC PLUS Machine NO.: R7AQ2301, Year of manufacture: 2002 Specifications: Max. swing diameter 430 mm dia. Max. rotary. About Bed 600 mm Dia. Turning length 744 mm Distance between spindle lugs 975 mm Main engine power 21/29 kw Main spindle speed range 0-5000 rpm Bore through drawing tube 65 mm dia. C axis - main spindle movement 0.001 degree Y axis 100 +/- 50 mm B Axis Movement Stepless 45 Degree Tool turret 1 with 12 VDI 30 stations Powered stations turret 1 12 pc. - 4000 rpm Y+B pieces. Engine power driven tools 6.7 Kw Tool turret 2 with 12 pc. VDI 30 stations Counter spindle C axis - counter pindel movement 0.001 degree Counter spindle speeds 0-5000 Pr/min Motor power counter spindle 17/22 Kw Control Siemens 840 D Fabr. Power on 10650 hours Controlled in 8 axis - x1-x2-z1 ...

For sale: Multi-axis CNC lathe from Hyundai-Wia type LM 1600TTSY + LNS 3-meter bar magazine type Alpha 552. Beautiful versatile CNC lathe with lower and upper turret with 12 positions and intermediate positions each. The upper turret is additionally equipped with a Y-axis with a displacement of 100 mm (+50, - 50 mm). The machine is equipped with two identical spindles with a bar passage of 51 mm and a maximum speed of 6,000 rpm. The maximum turning diameter is 230 mm and the maximum turning length is 705 mm. Driven tool holders can be stored in all positions! The maximum speed on the driven tool is 5,000 rpm. The main motor power on both spindles is 15/11 kW and they are built-in spindle motors! The machine is also equipped with an automatic tool presetting device, a workpiece collecting device, a workpiece extractor for the right spindle, a workpiece discharge conveyor for the finished  ...

Turning-milling center Manafacture: Mazak Type Quick Turn 250 MSY Year of construction: 2017 Switch-on hours approx. 12,000h Cycle hours approx. 8,000h Conveyor High-pressure pump Machine milled 100% only aluminum Features Chuck diameter main spindle 10 " Chuck diameter counter spindle 6 " Max. swing diameter 695 mm Max. turning diameter 380 mm Max. rod diameter main spindle 80 mm Main spindle Max. speed 4,000 min-¹ Rated power (30 min. operation) 26.0 kW Torque (max.) 465.0 Nm Counter spindle speed (max.) 6,000 min-¹ Rated Power (25% DC) 11.0 kW Torque (max.) 90.0 Nm Tool turret Number of tool slots 12 (all positions driven) Milling spindle power (40% DC) 6.0 kW Max. milling spindle speed 5,000 min-¹ Max. milling spindle torque 47 Nm Feed axes rapid traverse X-axis (max.) 30 m/min Rapid traverse Y-axis (max.) 21 m/min Rapid traverse Z-axis (max.) 33 m/min R ...

Machining diameter max: 36 mm Maximum spindle speed: 6300 rpm No. of Spindles: 2 Controller: Traub TX8i Toolchanger 1: No. of tools: 12 positions X-axis travel: 50 mm Z-axis travel: 50 mm Toolchanger fronside: No. of tools: 7 positions Speeds: 150 - 3000 Rpm 300 - 6000 Rpm Max. diameter: 40 mm X-axis travel: 370 mm Z-axis travel: 250 mm Toolchanger backside: No. of tools: 5 Speeds: 150 - 3000 Rpm 300 - 6000 Rpm Max. diameter: 40 mm X-axis travel: 73 mm Barfeeder: FMB Turbo 5-42 Barlength: 3200 mm Bardiameter: 5 - 42 mm Country of origin: Germany Machine LxWxH: 3400 x 1300 x 1700 mm Machine weight: 4000 kg

SPINNER TTC 300- 52 SMMCY CNC Lathe YOM 2012 Twin-opposed-spindle, twin-turret lathe Control FANUC 31iT Swing diameter 400 mm Max. turning dia ~200-250 mm Max. turning length 400 mm Travels: X1 180 mm, X2 110 mm, Z 450 mm, Y +40/-40 mm Rapid traverse: X1 15 m/min, X2 15 m/min, Z 24 m/min, Y 15 m/min With C-axis Main Spindle 1: Motor spindle with water cooling With hollow shaft measuring system for C-axis drive mounted directly on the spindle shaft Spindle bore 52 mm Spindle speed 0-5000 rpm/ 19 kW Performance Pmax 23,5 kW Torque 150 Nm Spindle nose A6/DIN Sub-Spindle 2: Motor spindle with water cooling With hollow shaft measuring system for C-axis drive mounted directly on the spindle shaft Can be moved on a slide to take over spindle 1 Spindle speed 0-7000 rpm/ 8 kW Performance Pmax 13,8 kW Torque 189 Nm Spindle nose 100 mm Turret 1: At the top of the ...

Used multi-spindle machine INDEX MS36E built in 1996 including a lot of accessories (collets, synchronizer guns, interchangeable wheels, various working curves, etc.) The plant is virtually ready for dispatch, in a dismantled state for inspection. For photos, technical data and a list of accessories, see Appendices. It has no major defects, is basically ready for operation, only the rubber hoses should be changed before commissioning and the coolant-lubricant system should be thoroughly cleaned and rinsed throughout. Accessory listing MS36E Iemca Loading Magazine Oil filter system (+3 rolls of filter paper) Collets Synchronizer Clamps (sentences) Ø 24 Ø 16 Ø 26 Ø 20 Ø 27 2x Ø 23 Ø 28 2x Ø 26 Ø 30,5 2x Ø 27,5 Ø 31 Ø 32 div. jaws Ø 33 for 3-jaw chuck Ø 34 Ø 36 SW 24 1x spindle stop (currently layer 4) 3 sets of rod guide tubes Various reductions f ...

Okuma Twin-Star LT300 MY with 2 equivalent main spindles and tool turrets (2x12) Speed range: 38-3,800 rpm. Torque: 420 Nm with CNC control Okuma OSP-P200L with tool monitoring system for tool life and breakage with control expansion kit One-Touch-IGF-M-D Gravity Belt Filter SPB4 Coolant pump 20 bar, 40 l/min. 2 x Kitagawa B208 power clamping device Full clamping cylinder programmable right + left Y-axis with stroke for driven WZ stations Interface + servo drive integrated for loading portal Loading portal MIDI diam. 200 x 150 mm Pallet stacking magazine PSM 100/20 Workpiece shuttle, stacking table extension Connection nozzle for air filter (preparation) Turning diameter 350 mm (550 mm above bed) Speed range: 38-3,800 rpm. Torque: 420 Nm Year of construction 07/2011 Operating hours: 25,871 h / Spindle running time: 24,773 h At the end of last year, almost € 6 ...

Stock Number: 3817 CNC LATHE Manufacturer: EMCO , Type: HYPERTURN 665 Machine NO.: R7AR2101, Year of manufacture: 2003 Specifications: Max. swing diameter 430 mm dia. Max. rotary. About Bed 600 mm Dia. Turning length 644 mm Distance between spindle lugs 975 mm Main engine power 21/29 kw Main spindle speed range 0-5000 rpm Bore through drawing tube 65 mm dia. C axis - main spindle movement 0.001 degree Y axis 100 mm +/- 50 mm Tool turret 1 with 12 / VDI 30 stations Powered stations turret 1 12 - 4000 rpm pcs. Engine power driven tools 6.7 Kw Tool turret 2 with 12 stations Counter spindle C axis - counter pindel movement 0.001 degree Counter spindle speeds 5000 Pr/min Motor power counter spindle 17/22 Kw Control Siemens 840 D Fabr. Controlled in 7 (X1-X2-Z1-Z2_C1-C2-Y) axes Accessories: Material feeder KAMA 4265 mm Lengt ...

WE SELL GREAT CONDITION BIGLIA EQUIPPED WITH COMPLETE TOOLS AND ACCESSORIES , BAR FEEDER LNS MACHINE HAS RUN ONLY 606 HOURS AND IT COMES WITH COMPLETE DOCUMENTATION AND ACCESSORIESS WE ORGANIZE DISMANTLING AND LOADING. FOR CUSTOMER WE CAN ORGANIZE AS WELL TRANSPORT .

Multi-spindle lathe (8 spindles) max. rod diameter 16 mm Guide tubes 4,000 mm Conveyor