used GUBISCH Moulders

Gubisch planer and moulder 172/7 S/N 3425 80 Year of construction 1980 Length of the dressing table 1950 mm Planing width maximum 170 mm Planing height maximum 120 mm Spindle diameter 40 mm 7 planing shafts : 1.Bottom dressing shaft 7.5 kW 2.Right joining shaft 3.0 kW 3.Left wave 4.0 kW 4.Right shaft 4.0 kW 5.Top Thickness shaft 4.0 kW 6.TopDickenhaft 5.5 kW 7.Uniwelle top / bottom 3.0 kW Voltage 380 V, 50 Hz Power consumption 33.6 Kw Feed motor 1.5 kW Feed speed infinitely variable 5 – 30 m/min. Weight 3300 kg Dimensions ( L X W x H )4800 mm x 1400 mm x 1850 mm technical information subject to reservation

Type G617 Working width 170 mm Working height 110 mm Infeed table length 1600 mm 7 spindles B, R, T, L, R, T, B Spindle diameters 40 mm Feeding speed 30 m/min Made in Germany 1971 y. Transport dimensions 4900x1100x1500mm Weight 3100 kg Price 2400 Eur (EXW Jonava, Lithuania)

Gubisch Umfaelzer with 3 spindles, including olive drill, ; ready for use

Gubisch Type 147 4-Side planer Planing width 180 mm Planing height 150 mm Feed stepless with 7 spindles of which a universal spindle with length dressing table Drive 34.6 kW with lots of tools, planing knives, etc. with planing heads and several groove and spring sets at least 4 planing heads, with chamfering knife and spacer discs

Four-side planer / profile milling machine Fabr. Gubisc Model: 172/1K+R Year of construction: 1981 Planer width: 170mm 5 spindles

Window processing line, CNC window production system, window angle system -Double end tenoner, make: Gubisch, type: DST H -Year of construction: 1994, serial no.: 7593 -2x 2 tool towers with 5 heads each -built tools from: Leitz -Shaft mount: Ø 50 mm -Max. Tool: Ø 350 mm -Max. Tool height: 650 mm -4x milling motors 11 kW 2800 rpm -Control, make: Gubisch -Roller conveyor, L/W: 4,000 x 200 mm -Milling machine, make: Gubisch, type: FN2000 -Year of construction: 1994, Ser.-No.: 7490 -4 milling shafts -4x milling motors 9.2 kW 2800 rpm -Tools from: Leitz -Shaft support: approx. Ø 40 mm -Max. Tool: Ø 230 mm -Max. Tool height: 350 mm -m. Feed roller conveyor, L/W: 4,500 x 150 mm -Discharge roller conveyor, L / W: 4,000 x 200 mm -Tool cabinet -Switch/fuse box

Manufacturer: Gubisch, Type: ES 2000, Year: 1991, Control: Hand, Trimming saw: yes, Durchmesser Säge: 400, Saw kW: 3, rotations controlled: 2800, Working hight mm: 120, Vertikal spindle: yes, Working range Z-axis mm: 300, Length lifting spindle mm: 300, Diameter of the spindle mm: 50, Travels of spindle: 2 x100 mm, Milling spindle kW: 50, rotations controlled: 2800, Working stations: 1, Angular adjustment horizontally: yes, Work piece hight max mm: 120, Hauptmotor kW : 7,5, Wight approx. kg: 2000, Vorschub Stufenlos: yes, Mitre Window: yes, Year :1991

Four-sided planer with tools 7 chillers

Description: 3 right vertical shaping spindles 1st spindle pneumatically 4 kW down shaping  , Downcut floating automatic 2nd spindle fix 5.5 kW counterroutating 3rd spindle fix 3.0 kW counterroutating Throughfeed, infinitely variable feed speed 1.5 kW  , Approx. Onsite Dimension. (l x w x h): 4,000 x 1,400 x 1,800 mm, weight approx.: 2,000 kg

REP model V68 Y20W vertical rubber injection presses, Type G8, year 2003, Clamp force 4000kN, Platen size: 630 x 800mm, Distance between columns: 730/440mm, Daylight: approx 1000mm, Injection unit type Y2000, Piston dia 81.5mm, Shot capacity: 2000cm3, Injection pressure: 1500 Bar Top and bottom ejectors. O/a dimensions: 2950mm x 1410mm x 4800mm high, weight approx 12000kgs. Complete and in very good condition (not operated for over 2 years).

Type: T-01 Exhibit and demonstration model! - Table length: 1200 mm - Table width: 530 mm - Table height: 900 mm - Length of slide: 1,200 mm - Width of the slide: 315 mm - Height of the slide: 142 mm - Inclination of the milling spindle: 0 to -45° - Useful length of the milling spindle: 125 mm - Spindle speeds: 3500/6000/8000/10000 rpm - Thorn diameter: 30 mm - max tool diameter: 240 mm - max. can-draw tool diameter: 230 mm - Profile milling: 210 - 240 mm - Cone milling: 320 mm - Diameter suction nozzle: 2 x 120 mm electrical connection: - Motor power: 5.0 kW - Voltage: 400 V - Phases: 3 Ph - Current type: AC (AC) - Frequency: 50 Hz Dimensions: - Length: 1200 mm - Width/depth: 1400 mm - Weight: 510 kg Space: - Length: 4,400 mm - Width/depth: 4,420 mm The data refer to the recommended installation area and result from the dimensions of the machine  ...

Spindle diameter 30 mm Spindle speeds (4 levels) 1800/3000/6000/9000 RPM Spindle stroke 100 mm Spindle turning - 5° up to + 30 ° Max clamping height 105 mm Work table 710 x 640 mm Table height 900 mm G & HM-FS200S-STI

WEINIG planer/moulder Unimat 22A with 9 heads Year of construction: 1987 Serial number 222-896. The planer is in good working condition and has been partially overhauled, cleaned and subjected to careful technical controls. • The machine has been thoroughly cleaned and technically checked. • Some wear parts have been replaced. • A test run was carried out to ensure functionality. • The machine is bolted to a wooden structure and is ready for shipment. • The planer and moulder is equipped with all the tools and is sold as such. Further technical data of the machine: Maximum planing width: 220 mm Maximum planing height: 140 mm Diameter of the spindles: 40 mm Spindle speed: 6000 rpm Length of the inlet table: 2 m The machine has a total of 9 spindles with the following configuration: 1. Lower spindle / dressing spindle : 5.5 kW 2. Right spindle /  ...

Weibert WJ-F50 Table milling machine NEW Safety rulers in the shaper fence strongly ribbed cast iron table 1100x900mm electrical height adjustment 200 mm 5.5 KW R + L barrel 3000 to 10000 U/1 Control Panel top Milling spindle can be exchanged Tool - diameter When profiling 275mm at the tenoning 400 m stable role statement WJ-600600 K 4 Special price:

Gebr. Table milling machine with cross-cut saws STEHLE F3E Table size: 117 x 86.5 cm Table height: 85.5 cm Milling machine: Motor power: 4 kW 2 milling spindles: 30 + 40 mm Height adjustment via handwheel Height adjustment range of the milling spindle: 115 mm Left- and clockwise rotation 4 speeds: 3.0 / 5.0 / 6.0 / 10,000 rpm. Doubling the speed via selector switch Crosscut saws: Engine power: 3 hp (2.2 kW) max. saw blade diameter: 350 mm max. cutting height: 110 mm Lateral adjustment range: 120 mm Sliding carriage incl. slotted hood (self-made) Instruction manual available Transport dimensions (approx. dimensions): L: 205 cm W: 100 cm H: 120 cm approx. 1,000 kg Sold in ACTUAL condition and unrefurbished from carpentry dissolution. Fixed price.

Table milling machine SCM T 120 C. SUVA protection Maintenance: Malawer AG Spindle 30 mm 2900/4400/6000/7800/10000 RPM Weight 450 kg Masch No. 20474 L x W x H: 115 x 90 x 86 (150) cm Built in 1961 Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Type : T900 Spindle-30 mm spindle rotation speeds- 2500 / 5000 /8000U /Min/rpm Spindle tilt- 5° to +45° spindle trave-140 mm max. clamping height-125 mm max. tool diameter-230 mm Table dimensions-1020x700 mm table height-900 mm dust collector plug-60/120 mm engine power-3 kW 400V weight net/gross-280 kg packaging dimensions-1150x1155x730mm

Rotary vane pump of Bush / AZO Air capacity: 160 m ³/h Power: 5.5 kw Vacuum capacity: 20 mbar

Kehl machine / milling machine Schneider 3-roll feed SUVA protection L x W x H: 120 x 100 x 170 cm Weight approx. 580 kg Built in 1981 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Konturfrä�maschine crosscut saw with sliding table Type: FK5 Second-hand machine Sled Spindle diameter 30 mm Speeds: 4 Height adjustment: Handwheel Power: 6kW Circular saw, crosscut saw Machine is fully functional. Machine is in good condition. We love to hear from you.

spindle moulder with tilting shaft SAC SUERI TS 145 second hand machine electric shaft inclination -5 ° / + 45 ° electric mast lifting extended plans support extension motor power Hp 7,5 n.5 shaft rotation speed electrical inversion of the direction of rotation shaft diameter mm. 35 volt. 380/50

SPINDLE MOULDER type SCM T130 . second hand diam. spindle mm. 40 volt. 380/50

Onsrud twin table copy shaper ONSRUD-auto dual table rotary shaper, model RS-28, for continuous production, 2-speed cutter (5,000/10,000 rpm.) pivots alternately to the right or left table, as center clamp engages, the table rotates, the cutter pivots into your part and continues around template machining the part, the operator unloads and loads new part on alternate table, when cut is complete, operator presses the foot pedal, the cutter then pivots to alternate table &cuts, cycle continues.. $9,900 Contact Fred (716) 433 4224 (12:00 noon is best time to call)

Planing width mm: 330 Planing height mm: 120 Inlet table length mm: 1800 Feed max m/min: 6-36 (inverter) Speed max: 6500 Number of spindles: 6 Spindle arrangement: 01 - Planing shaft - KW 15 01 - Spindles right - KW 15 01 - Spindles left - KW 15 01 - Spindles above - KW 15 01 - Spindles above KW 18 01 - Spindles below KW 15 Software: Control 100 PC Plus Spindle diameter mm: 50 Handling System Weight Kg: 5000

Table dimensions mm: 1000 x 900 With drive system