used GRIGGIO Wide Belt Grinding Machines

CATALOG NUMBER 6679 TECHNICAL DATA - max width of the workpiece 250mm - max height of the workpiece 170mm 6 spindles: 1) horizontal lower 250mm 5.5kW 2) vertical right 170mm 5.5kW 3) vertical left 170mm 5.5kW 4) horizontal, upper 250mm 7.5kW 5) horizontal lower 250mm 7.5kW 6) universal 250mm, adjustable at an angle of 360 ° 5.5kW - 6 electrically adjustable spindle up / down - all adjustable spindles up / down, right / left - diameter of the spindles 40mm - 6 introductory pulling rollers, toothed, including 2 double ones - 6 rollers leading out, pulling, rubber, smooth, including 2 double - 2 clamps from above - from the bottom, a roller introducing toothed, pulling, torsion in the table before the first spindle - at the bottom, 2 pulling rollers, metal, smooth - 4 side clamps at the bottom - feed on cardan shafts - pneumatically pressed rollers - smooth regulati ...

Technical data/equipment: - Working width 530 mm - Strip knife shaft, 4 knives - Connection 12A, 5.6 kW, 380 V, 50 Hz - Vibration protection planer shaft cover - electr. Table height adjustment - Shaft speed 5,000 rpm

Four side planer Griggio G240 P/5U for wet Maximum planing width 240mm Maximum planing height 160mm Number of spindles 5 Spindle arrangement Bottom Rights Left Mountain Universal Drive: in the table Infinitely adjustable feed on the inverter Year 2007 Weight: 4060 CE Certificate Net price

CATALOG NO. 6873 TECHNICAL DATA - max width of the processed element 240mm - max height of the processed element 190mm 4 spindles: 1) horizontal bottom 240mm 5.5kW 2) vertical right 190mm 5.5kW 3) vertical left 190mm 7.5kW 4) horizontal top 240mm 7.5kW - all spindles adjustable up/down, right/left - spindle diameter 40mm - 6 pulling and toothed input rollers from above - 2 output, pulling, rubber, smooth rollers from above - from the bottom, a toothed input roller, pulling and turning in the tabletop in front of the first spindle - 2 pulling rollers from the bottom, metal, smooth - 4 side pressures from the bottom - feed on cardan shafts - pneumatically pressed rollers - smooth adjustment of the feed speed on the inverter 6-30m/min - 3kW feed motor - working pressure 8-10bar - electric setting of planing thickness - body lifting motor 0.75kW - central lubrication o ...

Screen of plc control is defective - does not start involuntarily defective screen - charging options available - saw below 45 degrees - without extraction

Working condition - without extraction - saw blade can be placed under 45 degrees - loading options available

Working width: 530 mm; Planing height: 250 mm; Planer shaft: strip knife; Number of knives: 4; Height adjustment: electric; Planer thickness indicator: Mechanical counter; Feed speed: 2 speeds; Feed roller: steel; Pull-out roller: steel; Table rollers: no; Motor power: 5.5 kW; Suction connection: 160mm; Machine length: 1200mm; Machine width: 1200 mm; Weight: 900kg;

Code: 0211 Brand: GRIGGIO Model: TR C/N - CE Standard Bit mortiser with tilting table - CE Standard Worktable dimensions mm 565 x 315 Head longitudinal stroke mm 240 Head transversal stroke mm 180 Head vertical stroke mm 140 Drill chuck Wescott mm 0-20 Spindle speed 3000 rpm Motor power Hp 3 Screw and eccentric woodpress Square on the plane tilting -45 / +45 degrees Revolver unit with center distances 16-22-25-32 mm Handwheel with numerical height display Wheels on base Overall dimensions mm 800 x900 x 1400 h Weight kg 260

Spindle swivel: Yes -5 to 45Â; Height adjustment: handwheel; Swivel Adjustment: Handwheel; Milling jaw adjustment: manual; Height indicator: mech. Numerator; Swivel angle indicator: mech. Numerator; Milling stop indicator: mech. Numerator; Milling spindle diameter: 30mm / new milling spindle; Speeds: 3000, 4500, 6000, 9000; Motor power: 5.5 kW; Engine braking: Yes, automatic; Suction connection: 2 x 120mm; Machine length: 2000mm; Machine depth: 1400mm; Weight: 900kg;

Griggio TC200 spindle moulder with carriage Spindle diameter 35mm Spindle total height 190mm Longitudinal carriage in the worktop Carriage length 1100mm Left and right spindle rotations Spindle speed variable on belts Spindle RPM: 3000/4500/6000/8000/1000 4kw main motor Manual spindle lifting with crank Extraction pipes 2x120mm Dimensions of the machine 120x90x125cmH 500kg

Spindle moulder Griggio T220 Spindle diameter 35mm Spindle total height 150mm Spindle speed variable on belts Spindle RPM: 3000/4500/6000/8000/1000 5.5kw main motor Manual spindle lifting with crank Four-roller feed Europa 440 Extraction pipes 2x120mm Dimensions of the machine 120x90x125cmH 500kg

Description: Drilling table size 530x220 mm knife: 3 pieces, length of surfacing-table: 2200x400 mm, planing height: 200 mm, planing width: 400 mm, Approx. Onsite Dimension. (l x w x h): 2,200 x 1,200 x 1,000 mm, weight approx.: 900 kg

Description: GRIGGIO GB 5/8 RA Edgebander Workpiece thickness: 10 - 60 mm Max thickness of the panel: 60 mm Min width of the panel: 60 mm Min length of the panel: 120 mm Min thickness of the panel: 10 mm Edge thickness: 0,4 - 8 mm Edge dimensions in roll: 0,4 - 3 mm serial number: 15E000243900300, control: SIEMENS SMART LINE, Approx. Onsite Dimension. (l x w x h): 5,500 x 1,100 x 1,600 mm, weight approx.: 2,500 kg

Description: Maximum saw blade diameter: 400 mm Manual stroke and tilt adjustment table length: 3,200 mm, Approx. Onsite Dimension. (l x w x h): 3,500 x 1,600 x 1,200 mm, weight approx.: 600 kg

Description: Griggio Unica 400 Brand: Griggio Type: Unica 400 Year of construction: 2010 Main saw: ø400 mm Cutting height: 125 mm Saw tilt adjustment: 0-45 Digital readout Motor: 7.5 kW Front zipper saw: 0.75 kW, ø125 mm Roller carriage: 3,200 mm Cutting width: 1,250 mm with digital readout on sawing guide Length stop: 2,200 - 3,300 mm Adjustable support stand and roller guide Extraction: top: ø80 mm, bottom: ø120 mm swival range +/-: 45 °, Approx. Onsite Dimension. (l x w x h): 3,200 x 2,400 x 1,600 mm, weight approx.: 900 kg

Properties < b >: < / b > * Used belt conveyor * Color: grey * SEW geared motor available * Feet to be ordered separately * Material: Steel * Ideal for the fast material handling * Expertly disassembled and packed * Condition: fully operational Technical data < b >: Mass of the belt conveyor < /b > Overall length: 1,040 mm Overall width: 700 mm the belt < /b > details < b > Belt width: 600 mm Belt type: smooth the framework < /b > details < b > Frame height: 160mm the motor < /b > details < b > SEW-EURODRIVE Type: R27 DT90S4/BMG/HR kW: 11 Belt conveyor < b > < /b > The belt is ideal to dovetail machines or jobs in the picking zone and to optimize the internal process. During transport, the belt conveyor can promote sensitive and different-sized containers, boxes or other packagi ...

Wide belt sander GIANTWAY XSG 1300 R-RP Working width of 40 1300 mm - min. / max. clearance height 2.5 / 100 mm - speed infinitely variable 4 - 24 m / min. -1 grinding unit:-motor 30 kW / 400 V - belt speed 19.5 m/sec - 2. sanding unit - motor 22 kW / 400 V - belt speed 16 m/sec -Bursteaggregat - engine - 0,37 KW -Motor feed 5.5 kW - motor height adjustment 0.37 kW - pneumatic 8 bar - air consumption 0, 5 m 3/min - digital display with automatic workpiece thickness setting rubber transport carpet automatic star / Delta starter circuit - pneumatic belt tension - about thick backup using the self-timer - amperemeter for the monitoring of cut - immediately-stop with disc brake fault - pneumatic belt cleaning - CE standard

Grinding width mm: 1350 Pass-through height mm: 3 - 160 Feed max m/min: 2 - 20 - Inverter KW 3 01 Grinding unit: Grinding belt length mm: 1380 x 3250 - 24 SH - 15 KW Blow-off device Vacuum table Scotch Brite x mm 200 Machine Control: Viet "IPC 15" Touch Screen Centering device Weight Kg: 3970

Grinding width mm: 1350 Pass-through height mm: 3 - 160 Feed max m/min: 2 - 20 - Inverter KW 4 01 Grinding unit: Grinding belt length mm: 1380 x 3250 - 15 KW (INV) 01 Orbital grinding unit "Spinbrush" - KW 4 (INV) 01 Grinding unit: Grinding belt length mm: 1380 x 3250 - 15 KW (INV) Machine Control: Viet "IPC 15" Touch Screen Blow-off device 1 Blow-off device 2 Vacuum table Scotch Brite Weight KG: 7200

Grinding width mm 1300 Grinding units total 6 Ribbons 4 Grinding rollers 1 Steel roller Segment grinding shoe electronic Paint intermediate grinding Vacuum table Table height constant Grinding belt length mm 2620 Further technical data Machine control HEESEMANN SMA PC11/40 Oscillation HEESEMANN CSD Turning direction reversal Ionizing device Workpiece thickness min mm 3 Pass-through height mm 80 Grinding shoes total 1 Segment width mm 16 Grinding brush unit Roller grinding brushes Cleaning brush dust removal machine Main motor kW 31 Band speed max m/s 24 Grinding belt swarm. adjustable infinitely variable Feed max m/min 28 Feed Stepless Blow-off device grinding belt Segment control electromagnetic Aggregates frequency-controlled 5 Cross-bands adjustable infinitely variable Aggregate configuration w-q-s-q-q-q-b Pressure lamella rim unit transverse  ...

CATALOG NUMBER 6145 TECHNICAL DATA - max workpiece width 1100mm - max workpiece height 140mm 3 aggregates: 1) grooved rubber roller for 15kW calibration 2) grooved rubber roller for 11kW calibration 3) grooved rubber roller for 11kW calibration in advance: - metal skid roller - rubber skid roller - aggregate - 2 rubber rollers, sliding - aggregate - 2 rubber skid rollers - aggregate - rubber skid roller from down: - feeding table 3600x1000mm - feed speed adjustable on the inverter 0.25kW - pulling tape - 3 rubber rollers, sliding, leading out - oscillation of pneumatic strips on photocells - blowing off the tapes - electric table lifting - 0.75kW motor lifting - smooth regulation of the feed speed - 2.2kW feed motor - with a vacum pump - 4kW pump motor - diameter of the extraction port 110mm, 80mm - working pressure 6-8bar - diameter of the extraction port 3 ...

Wide belt sander Boere TKKC+BKKC 1100 (bottom/top) Technical specifications: Machine type TKKC+BKKC 1100(bottom/top), in good condition, flow processing machine, with through-going feeder in machine. Motors number 6 works above the item, works beneath the item, Sanding width with infinitely adjustable speed 1100 mm Sanding rails 2 Rotating brush cleaner 2 Sanding rollers 2 Calibration milling heads 2 Sanding belt length mm 1900 Passage height max, mm 250 Hardness grade of roller in ° shore 60 Sensing of workpiece thickness mechanical Feedrate max m/min 25 Total connection kW Weight kg 6800 Machine type TKS / BKS, in good condition, flow processing machine, with through-going feeder in machine, number of motors 6, works above the item, works beneath the item, working width 1100 mm, with infinitely adjustable speed, motor size 4x15 Hp, with 2 rollers, 2 s ...

Grinding machine Heesemann FGA 6 Technical specifications: Sanding width mm: 1350, Sanding hight mm: 80, Number of sanding belts: 1, Rollers: no, Cross sanding unit: no, Shoe unit: yes, Elektronik control : yes, Power belt 1 in kW: 11, Intermediate sanding of lacquer: yes, Constant table hight: yes, Segment sanding shoe: 40, Brushing unit: yes, Year :1989

Code: 0533 Brand: TAGLIABUE - COSTA LEVIGATRICI Model: TAG 1/C 3000 - CE Standard Automatic wide belt sander with mobile head 3000 mm for wood, panels in general, plywood, truck beds, camper vans, caravans, prefabricated houses, shipbuilding, aeronautical industry, composite materials and various - CE Standard - Year 2005 Technical data: Working width mm 3000 Max working height mm 100 Min working height mm 2 Variable belt feed speed m/min 5/25 with inverter - Motor Kw 4 Calibrating/sanding steel roller - Diameter mm 400 - Belt development mm 2620 x 3050 - Motor Hp 50 (Kw 37) - Rpm 1465 Front and rear brackets for holding pieces Oscillating blowers for cleaning front and rear belt l/min 2000 Automatic head lifting Rotating blowers for cleaning output panels - 2 suction mouths diameter 160 mm Numerical control Syel for working group management Emergency safety bar Suc ...

Wide belt grinding machine Danckaert E 527 - S 81894 Grinding width 1120 mm Combination unit: contact roller / sanding shoe Carpet needs to be replaced Subject to change, error, prior sale ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system+technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone 0041 62 966 18 32 Fax: 0041 62 966 21 12