used GOEBEL Slitter rewinders

Abrbeitsbreite / working width 1250 mm

R25716/12 GOEBEL Roller cutter Model: Practica H III Built: 1957 Working width: 1000 mm Rolling diameter: max. 1000 mm Shaft diameter: 70 - 76 mm Round knife Cutting width min.: 15 mm Roll-up diameter: min. 15 mm, max. 400 mm Speed: 300 m/min Available: immediately

Working width / working width 1550 mm

Working width / working width 1550 mm

R25716 / 12 GOEBEL reel slitter model: Practica H III age: 1957 width: 1000 mm diameter unwinder: max. 1000 mm diameter core: 70 – 76 mm system: circular knife min. slitting width: 15 mm diameter rewinder: min. 15 mm, max. 400 mm core diameter: 12 mm speed: 300 m/min Available: sofort

grinding diameter: 5 - 255 mm grinding length: 300 mm centre height: 130 mm grinding length at plunge grinding: 50 mm control: SINUMERIK 805 grinding spindle speed: 25 - 1400 U/min work piece spindle speed: 0 - 500 U/min feed of grinding spindle slide cross: 0 - 5000 mm/min table speeds: 0 - 5 m/min grinding wheel diameter: 450 mm total power requirement: 10 kW weight of the machine ca.: 2,3 t dimensions of the machine ca.: 2,65 x 2,2 x 2,35 m Accessories: grinding wheel with flange, 3-jaw chuck, electron. hand wheel The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Internal threading machine Hagen & Goebel type HG 124 Masch. No. 4112 Year of construction approx. 1980 Cutting capacity M 3 to M 18 in brass M 3 to M 10 in steel projection 250 mm Table size 345 x 245 mm Spindle speed 200 - 1000 rpm. Motor power 0.55 / 1.0 kW Mains connection 380 volts, 50 Hz - 6 speed levels via belt change (3 steps via belt + 2 engine speeds) - Table height adjustment with rack via hand crank on the round column - without guide cartridge - Drill chuck 1 to 13 mm- Tool holder 25 mm cylindrical shaft holder Space requirement L x W x H 900 x 500 x 1800 mm Weight 260 kg good condition; used

3 printunits (1x possible copy stop) We have printing cylinders of : - 24" - 23" 2/6 - 25" Max web width 520 mm Rol to Rol Also, the following parts: - Cross perforating cylinder : 2x 24" - Jump perforating rings - Ranking rings : 4x 24" + 2x 25" - Pinfeed rings : 2x single + 2x double

Goebel OPTIFORMA 520 Year 1985 Size: Width 520mm Unwind 5 printing units wet offset 4 bays in 25 inches Filing Hole Cross Perforation Cylinder Display: roll/roll roll/fold Machine is in production

Tapping machine Hagen & Göbel HG 16 C 12/16 1.950 € VB Pick-up only 39114 Saxony-Anhalt - Magdeburg 01.03.2023 3 Description Offer Tapping machine Hagen & Göbel HG 16 C 12/16 with coolant tank/pump without quill guide spindles and the tool holders (Fig. 1-6) The machine is sold to our customer due to a business change. It is operational and functional as far as it works. Manufacturer: Hagen & Goebel Soest Type: verm TB C 12/16 Ref. 2226 Year built:1993 Cutting capacity: depending on the material 4-56 mm at 14-28 m/min see performance plate Drive power: 3AC 380 V, 41.1/7.1 A 1.2 kWQ Engine: KBA 100 A 6 Coolant tank: approx. 25 l gesch. Cooling center pump: TB40/220-x 380V, 0.25 A, 12 kW, 2700 1/min, 50 l/min Accessories: no Dimensions: approx. HxWxD 1500 x 990 x 1400 mm Weight: approx. 750 kg estimated Condition: used see photos The machine is stil ...

thread dia.: 3 - 10 mm Tools speed: 120 - 600 U/min table-size: 250 x 350 mm throat: 250 mm voltage: 380 V threading length: 80 mm total power requirement: 0,55 kW weight of the machine ca.: 0,35 t dimensions of the machine ca.: 0,7 x 0,7 x 1,9 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

thread capacity: M 16 threading depth: 80 mm throat: 250 mm table-size: 400 x 500 mm spindle turning speed range: 9: 280 - 1800 U/min quill stroke: 80 mm thread capacity: min. M 4 mm dayligth: 315 mm spindle taper: B 18 thread capacity: in Alu: M 22 total power requirement: 2,2 kW weight of the machine ca.: ca. 200 kg dimensions of the machine ca.: xxxxxx 0,86/1,17 m Condition: ready for operation: CE signed: Electric 380 Volt: Base: Automatic thread cutting machine in table design, threads with conductive cartridge, single and continuous stroke, tap breakage protection,switching from ri- to le-running via double friction clutch that means only the work spindle will switched, pole-changing motor, faster return, column height adjustable, intervention protection secured by a magnetic switch. The thread cutting performance refers to material ST 37. Minimum quantity lubrication make HPM  ...

GOEBEL U7 SLITTER-REWINDER, overhauled in 2010, working width 3.600 mm., materials min 20 max 95 gqm, for paper, board, tissue, core Ø on mother reel 76/152 mm., unwinder: max reel diam.1.450 mm, rewinder: max reel diam.1.200 mm., Slitting: minimum5 mm.on 76 mm core, average speed 1.000 m/min., web guiding unit, shear slitting system, very good conditions, (the yellow table before unwinder is no more avialnle), WORKING WIDTH: 3.600 mm. 141.73

Specifications: Tapping capacity M 10 – M 45 Cutting capacity in ST M 36 Recording MK 2 Motor power 4 kW Speeds 35 – 185 rpm

Description: Machine number 1635 Including vice, jaw width 100 mm table surface area l x w : 350x250 mm, weight approx.: 300 kg, Approx. Onsite Dimension. (l x w x h): 800 x 600 x 1,900 mm

Dimensions (L/W/H): 660x1050x1600 mm metric thread: M 33 Messing metric thread: M 16 Gußeisen metric thread: M 14 Stahl no. of flutes: 25x10mm 2x T-Nuten throat: 220 mm weight: 730 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Description: tapping machine Thread diameter 3 - 10 mm Tool speed 120 - 600 rpm Table size 250 x 350 mm Projection 250 mm Operating voltage 380 V Thread length 80 mm Total power requirement 0.55 kW Machine weight approx. 0.35 t Space requirement approx. 0.7 x 0.7 x 1.9 m Approx. Onsite Dimension. (l x w x h): 700 x 700 x 1,900 mm, weight approx.: 350 kg

Materials: BOPP, PP ,CAST, ALU, LDPE, NYLON, PETP, OPA, Paper, PE, CPP, BOPET Working width 1300 mm Parent Roll Diameter 780 mm Final Roll Diameter 560 mm Maximum mother reel weight 400 kg Finished Roll Weight/Вес готовой бобины (kg) 200 kg Duble Unwinder Unwinder with shaft Rewinder with shaft Number shafts 2 Thickness range (microns) 12-250 Speed (m/min) 500 m/min Brake type With magnet Knife type/Тип ножа (circular, razor, scissor) Razor Slitting Width (mm) 35-130 Unwinder Roll Core Diameter 75 mm Rewinder Roll Core Diameter 75 mm Rewinder Tension (kN) 0-1000 Pressure 6 Bar Control system Voltage 3X380V Frequency 50 HZ Installed Power 55 Kw

450 Automatic Die Cut and Turret Rewinder 450mm Rotary Die Cutting unit: -Unwinder with auto web guider -Auto Tension Control system -Pressure meters for die cutting unit -Standard slitting unit with 6sets blades -Standard matrix removing system -Magnetic Powder system,mechanical speed 100meters/min -Max unwinding diameter 700mm, web width 330mm -Standard connection component to 330 turret rewinder 450 Auto Turret rewinder: -Automatic paper core bowl feeder -Automatic tail glue unit -Automatic paper core conveyor -Pressing paper swing arm -Automatic cut unit -Automatic finished roll ejection -Automatic brush press paper unit -Automatic core glue unit -Air expanding shaft 4sets each sizes 1’’, 1.5’’ and 3’’ -Labeling System (optional): Included Features: Speed: 60-100 m/min Max. Rewinding Diameter: 350mm Max. Web Width: 450mm Min. Rewinding W ...

Material width max.: 2.500 mm Unwinding-diameter: 1.200 mm Rewinding diameter: 1.050 mm material specification: film from 12 µm, paper + laminates , paper + board 35-250 gr/m2, - exhauster and banana roll - number of slitting / knifes: max 7 reels out / round-knifes - min. slitting width: min 180mm out - max. speed - mechanic/practical: abt. 400 m/min - copy of brochures / drawings - although from feb 1965

material-width : max 1.200 mm cores of mother roll 76+152 mm weight of un+rewind-roll 1.000 kg unwinder diameter max. 1.000 mm rewind diameter max 1.000 mm rewind-roll min. width: 150 mm one arm max. 219 mm / two arms up from 220 mm rewind shaft dia. 50 / 70 / 76 mm tension-unwinding : 100 kg tension-rewinding : 20 kg/each arm machine speed : 350 m/min

Technical specifications: Max. width 330mm Max. Rewinding speed 200m/min Max. Control speed 250m/min Max Roll weight unwinder 150kg Max. Roll weight rewinder 70kg Max. Diameter unwinder 700mm Max. Diameter rewinder 400mm Max. Paper tension 5-100N Diameter Shaft unwinder 76mm Diameter Shaft rewinder 76mm Configuration: Unwinder Guidline Splice table Stroboscope Settings module machine Controle area (AVT camera not included) Bufferzone Extra webguide Niprol modules Slitting module (razerknives) Web clamp Rewinder (Friction shaft)

Unwinder Web guide rotary die cut Missing label detection to check Waste rewinder Slitting Speed: 120 m/min

Slitter /Unwinder Manufacturer: Proslit Model: DUO 1350 SL Year : 2007 Machine Number: 135 SL With Printvision/ apollo II AVT Precision Camera Complete with all available spares and manuals

Special offer: Lemu 1050 mm semiautomatic slitter rewinder reel diam on unwind: up to 1100 mm can be shown in operation rewind diam up to 180 mm, if more needed we will check if possible rewinder: cores: cores: 76 mm and 12,7 min width of the reel 15 mm print of the stripe at the end of the reel automatic stop after achieving particular diameter of the reel machine offered subject to unsold Best regards