We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
used
Used storage heater Manufacturer Seipp Type UAGG 390- heats workpieces and ball bearings up to XXX kg With various yokes in different sizes Workbench model with swivel arm Applications: Chemical industry, steel industry, paper industry, transmission manufacturer, mechanical engineering, transport sector Voltage / Frequency / Power: 380 V / 50Hz / 35A Properties: When warming in a horizontal position, the maximum effect is achieved. Workpiece: Weight bearing max. xxx kg (other workpieces xx kg) Inner diameter 15/120 mm Outer diametermax. xxx mm Width max. xxx mm Automatic temperature: Magnetic sensor, control range 60 °C to max. 160 °C Aperture priority: Bays: Edge length 80mm, 70mm, 60mm, 40mm, 30mm, 20mm, 15mm - Induction heater - induction heater Special price
used
BUFFER SILO 15.000 lt. (or 8.000 - 12.000 - or bespoke), barrel Ø 2,2 mt. - height 3.0 mt., overall height 5,23 mt, made in electro-welded carbon steel sheet, sturdy supporting structure, internal rotor with spiral and agitator arms, inspection hatch on barrel wirh safety devices, bonfiglioli gearbox, power 3 kw electric motor, transmission with elastic coupling, finish painted externally with rustproofing and enamel, CE compliance + instruction manual, installed power : 3
used
clamping capacity: max. 500 bar diameter of piston: 100 mm range L-W-H: 190 x 150 x 200 mm weight: kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
clamping capacity: max. 500 bar diameter of piston: 40 mm : M16 range L-W-H: 140 x 65 x 85 mm weight: kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Capacity: 2800 Watt volume: 100 L filter: HEPA : 230 mbar material: INOX Edelstahl Behälter : 5000 mm hose diam.: 32 mm : 5000 mm noise: 82 dB dimensions: LxBxH 50 x 50 x 135 cm weight: 35 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Cylinder: Ø 100 mm -Piston rod: Ø 45 mm -Pipe Ø outside: mm -Stroke: 250 mm -Total length retracted: 460 mm -Recording hole: Ø 40 mm -Ideal for building a hydraulic press -Number: 10x available -Price: per piece -Weight: 22.5 kg/piece
used
Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Cylinder: Ø 50 mm -Piston rod: Ø 25 mm -Pipe Ø outside: mm -Stroke: 150 mm -Total length retracted: 270 mm -Recording hole: Ø 14 mm -Ideal for building a hydraulic press -Number: 16x available -Price: per piece -Weight: 3.5 kg/piece
used
Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Cylinder: Ø 100 mm -Piston rod: Ø 50 mm -Pipe Ø outside: mm -Stroke: 450 mm -Total length retracted: 680 mm -Recording hole: Ø 40 mm -Ideal for building a hydraulic press -Number: 10x available -Price: per piece -Weight: 40 kg/piece
used
Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Cylinder: Ø 50 mm -Piston rod: Ø 30 mm -Pipe Ø outside: mm -Stroke: 470 mm -Total length retracted: 615 mm -Ideal for building a hydraulic press -Number: 1x available -Price: per piece -Weight: 7 kg/piece
used
Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Cylinder: Ø 100 mm -Piston rod: Ø 50 mm -Pipe Ø outside: mm -Stroke: 300 mm -Total length retracted: 480 mm -Recording hole: Ø 40 mm -Ideal for building a hydraulic press -Number: 12x available -Price: per piece -Weight: 40 kg/piece
used
Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Cylinder: Ø 100 mm -Piston rod: Ø 50 mm -Pipe Ø outside: mm -Stroke: 400 mm -Total length retracted: 620 mm -Recording hole: Ø 50 mm -Ideal for building a hydraulic press -Number: 8x available -Price: per piece -Weight: 35 kg/piece
used
Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Cylinder: Ø 50 mm -Piston rod: Ø 32 mm -Pipe Ø outside: mm -Stroke: 400 mm -Total length retracted: 565 mm -Recording hole: Ø 20 mm -Ideal for building a hydraulic press -Number: 10x available -Price: per piece -Weight: 6 kg/piece
used
Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Cylinder: Ø 100 mm -Piston rod: Ø 50 mm -Pipe Ø outside: mm -Stroke: 400 mm -Total length retracted: 60 mm -Recording hole: Ø 50 mm -Ideal for building a hydraulic press -Number: 15x available -Price: per piece -Weight: 23.5 kg/piece
used
Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Cylinder: Ø 50 mm -Piston rod: Ø 32 mm -Pipe Ø outside: mm -Stroke: 260 mm -Total length retracted: 470 mm -Recording hole: Ø 25 mm -Ideal for building a hydraulic press -Number: 4x available -Price: per piece -Weight: 8 kg/piece
used
Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Cylinder: Ø 50 mm -Piston rod: Ø 25 mm -Pipe Ø outside: mm -Stroke: 260 mm -Total length retracted: 470 mm -Recording hole: Ø 20 mm -Ideal for building a hydraulic press -Number: 10x available -Price: per piece -Weight: 5.5 kg/piece
used
Brake drum -Bore: Ø 28 with keyway -Outer diameter: 220 mm -Interior diameter: 200 mm -Rezess: Ø 67 mm -Number: 8x drums available -Price: per piece -Weight: 21.5 kg/piece
used
Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Cylinder: Ø 100 mm -Piston rod: Ø 60 mm -Pipe Ø outside: mm -Stroke: 443 mm -Total length retracted: 540 mm -Recording hole: Ø 45 mm -Ideal for building a hydraulic press -Number: 7x available -Price: per piece -Weight: 45 kg/piece
used
Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Cylinder: Ø 100 mm -Piston rod: Ø 45 mm -Pipe Ø outside: mm -Stroke: 260 mm -Total length retracted: 530 mm -Recording hole: Ø 40 mm -Ideal for building a hydraulic press -Number: 1x available -Price: per piece -Weight: 21.5 kg/piece
used
Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Cylinder: Ø 90 mm -Piston rod: Ø 70 mm -Pipe Ø outside: mm -Stroke: 300 mm -Total length retracted: 530 mm -Admission piston rod: Ø 44 mm ball head -Ideal for building a hydraulic press -Number: 1x available -Price: per piece -Weight: 35 kg/piece
used
Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Cylinder: Ø 63 mm -Piston rod: Ø 32 mm -Pipe Ø outside: mm -Stroke: 340 mm -Total length: retracted 600 mm -Admission: hole Ø 30/45 mm -Ideal for building a hydraulic press -Price per piece -Quantity: 4 St. -Dimension: 600/100/H170 mm -Weight 19.5 kg / piece
used
Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Cylinder: Ø 50 mm -Piston rod: Ø 32 mm -Pipe Ø outside: mm -Stroke: 186 mm -Total length retracted: 535 mm -Recording hole: Ø 30 mm -Ideal for building a hydraulic press -Number: 3x available -Price: per piece -Weight: 10 kg/piece
used
Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Cylinder: Ø 40 mm -Piston rod: Ø 25 mm -Pipe Ø outside: mm -Stroke: 140 mm -Total length retracted: 360 mm -Recording hole: Ø 20 mm -Ideal for building a hydraulic press -Number: 5x available -Price: per piece -Weight: 8 kg/piece
used
Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Cylinder: Ø 63 mm -Piston rod: Ø 32 mm -Pipe Ø outside: mm -Stroke: 170 mm -Total length retracted: 330 mm -Recording hole: Ø 30 mm -Ideal for building a hydraulic press -Number: 10x available -Price: per piece -Weight: 13 kg/piece
used
Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Cylinder: Ø 80 mm -Piston rod: Ø 45 mm -Pipe Ø outside: mm -Stroke: 300 mm -Total length retracted: 600 mm -Recording hole: Ø 50 mm -Ideal for building a hydraulic press -Number: 10x available -Price: per piece -Weight: 24 kg/piece