used GANNER Carcass clamps

Fitting drill Ganner L x W x H: 1.20 x 0.80 x 1.40 m + stops Weight approx. 400 kg Built in 1987 The machine is in good condition, ready for operation. Changes, errors, intermediate sale reserved ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Fitting drill Ganner L x W x H: 1.20 x 0.80 x 1.40 m + stops Weight approx. 400 kg Built in 1987 The machine is in good condition, ready for operation. Changes, errors, intermediate sale reserved ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

spindle speed: 23; drilling distance: 32 mm; motor power: 1,5kW; drilling unit: swivel; The universal dowel hole drilling machine Ganner enables the drilling of bodies, frame connections, drawers, door panels, rows of holes or hole groups as well as the drilling of cabinet fittings.

Fitting drilling machine Gannomat 109 for drilling pot bands., Engine: 1.1 kW, Approx. dimensions: 70 x 150 x 165 cm.

Universally applicable frame and slotted hole drilling machine Especially for window construction and universal use through pneumatic height adjustment Double-hole drilling on two levels in one clamping operation Motor power 1.5 kW Starting the engine with a practical handle switch With two-jaw chuck 1 - 20mm from Röhm Pneumatic adjustment of the processing height, dowels on two levels without moving. The desired drilling heights can be set for each drilling level with a digital counter, and switching is then carried out pneumatically from the front Transverse adjustment 430mm, infinitely variable or in 12mm increments Maximum height adjustment approx. 100mm above table height Drilling stroke approx. 150mm 2 pneumatic workpiece clamps Grid rail for quick adjustment laterally in 12mm grid Stop for longitudinal adjustment during slotted hole milling 2 swivelling workpiece  ...

Gebr. Hole row drilling machine GANNOMAT Mentor 25 YOC 1999 Motor power: 1.5 kW Rated current: 3.3 A Compressed air connection required: 6 - 8 bar Drill bar with 25 spindles 32 mm pitch Drilling unit can be swivelled 90° Working width: 768 mm Portal passage: approx. 900 mm Drilling stroke: 100 mm Position adjustment drilling unit: 0 - 45 mm Position adjustment of hole row: 0 - 300 mm Clamping height (max. workpiece thickness): 100 mm Tool shank diameter: 10 mm Working height: 850 mm 2 aluminium stop profiles (150 cm each) Fully automatic pneumatic control with foot valve via control console: Clamping + Drilling + Relaxing electr. Intermittent operation pneumatic stop comb Angular Error Compensation System Program selector switch for automatic and leak-out function incl. various drill bits Dimensions: 1.15 x 1.03 x 1.25 m Weight: 420 kg Sold in ACTUAL c ...

Used Hole Row Drilling Machine Int. Art. Ref. k0919 Manufacturer: Ganner Type 204 Red Baron Year of construction 2001 Power 0.75 kW Right and left hinge Location: 59425 Unna The machine can be viewed under electricity. A forklift for loading is available. We reserve the right to sell in advance. It is possible to expertly inspect the items for sale on site. Specific questions should be clarified in advance. The information, such as technical data, dimensions, year of construction, condition are non-binding and have been shown to the best of our knowledge and belief. Errors are therefore reserved. The warranty/guarantee is excluded. The goods are sold from the location / warehouse, with the transfer of risk to the buyer there, this also applies to a shipment on our part, which we have carried out on your behalf. This offer is only aimed at traders, traders and leg ...

Pitch: , mm Overall size: , mm Weight: , kg Ganner olive drilling machine Still in use and to visit! The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer Ganner Maschineprotuktion, Austria automatic drilling of holes in panel parts of furniture, including drilling of sockets for installation of accessories, as well as automatic mounting of accessories. Distinctive features: Rigid stable design - a work table with PVC rollers, eliminating damage to workpieces when moving; - rack-and-pinion drive drive for feeding a drilling support, feed speed up to 75 m / min; -controlled axis Y of the drilling support allows you to process workpieces with a width of 130 mm to 700 mm; -controlled Z-axis of the drilling support allows drilling to a depth of 35 mm (drill length 70 mm), with the possibility of through-hole drilling; -controlled X axis of the longitudinal support with rack and pinion drive and linear guides, speed up to 120 m / min for moving and positioning workpieces with lengths from 250 mm to 2300 mm; -controlled Y a ...

Blum Drawerpress ZZM 6300 Boxpress year approx. 2000 Length of runner min 270 mm, max . 650 mm Carcase width min. 300 mm, max 1200 mm Bfxt92krpx Thickness of bottom min.13mm, max. 16 mm Dimensions of machine LxBxH approx. 2000x1200x2000mm Weight 450 kg

I sell a body press for furniture element mount RAMARCH PN31. Year of construction 2002. Material size 2500 x 1300 x 600mm Electropneumatic operation. Manufacturer: RAMARCH, Spain. (But already DYNMA) Very good condition. Available the same.

I sell a body press for furniture element mount RAMARCH PN31. Year of construction 1998. Material size 2500 x 1300 x 600mm Electropneumatic operation. Manufacturer: RAMARCH, Spain. (But already DYNMA) Very good condition. Available the same.

I sell a body press for furniture element mount RAMARCH PN31T. Year of construction 1997. Material size 2500 x 1300 x 600mm Version with rear transport track for finished elements. Electropneumatic operation. Manufacturer: RAMARCH, Spain. (But already DYNMA) Very good condition. Available the same.

21-26- Three-part mechanical press (used) In good condition Workbench area 2450x1000 mm Number of pressed parts: 3 The area of the pressed part is 800x1000 mm Maximum working height 500 mm Transport dimensions 2700x1000x1800 mm Weight 1055 kg Price 1100 Eur (EXW Jonava, Lithuania)

pneumatic carcass press with 4 pressure elements from above 2 sides working area 3200 x 1600 - YOC 1975

complete wooden carcass production line consisting of items 333-350:, incl. walk-in platform, above the entire machine line, (hammer bid is subject to reservation, sum of bids 334-350 or collective bid of item 333 will be compared after the auction ends)

Carcass assembly station, manufacturer: RWG, lift/turning unit third side, swivel/holding station, side wall, 90, roller conveyor system, 6-piece, W approx. 800 mm, different lengths, 2 cross conveyors, L approx. 3,000 mm, barcode reader DATA LOGIC, approx. 4.5 running metres. Small parts supply rack, (351) CNC continuous press, manufacturer: HELD, type: E 181, year of manufacture: 2002, PLC system control SIEMENS Simatic S7-300, operator panel SIEMENS Simatic OP 37, opening width approx. 2,236x1,200 mm, (352), pedestal foot press, manufacturer: KRAFT, year of manufacture: 1999, 4 impact cylinders, rotary head, probe head, hole gripper, socket foot magazine, 12 places, storage/retrieval section, (353), carcass transport line, manufacturer: KRAFT, driven roller conveyors, cross conveyor elements, turning station, Rail transfer car, 15 pieces, space requirement L/W 26x11 m, PLC system cont ...

Overhauled Plate clamps for Heidelberg Speedmaster SM102 price for 1 set (2 parts) (2 sets for 2 printing units/plates are depicted in the pictures)

Overhauled Plate clamps for Heidelberg Speedmaster SM102 price for 1 set (2 parts) (2 sets for 2 printing units/plates are depicted in the pictures)

Description: 6 screw clamps, in various sizes Approx. Onsite Dimension. (l x w x h): 1,200 x 800 x 600 mm, weight approx.: 30 kg

Base size: 630 x 630 mm Column size: 380 x 380 x 600 mm equipped with 4 x hydraulic machine clamps "Arnold" NC Arno Mat Type 1 sharpened machine clamp

Make Jori machine Model JBT50/4D Year 2018 Speed up to 1.800 cycli per hour Book thickness 3-50 mm Min book size 160 x 120 mm Max book size 450 x 300 mm Cover material 80 - 300 gram Block preperation Milling station with dust extraction Glue system Hot melt glue with 2 application rollers and side glue Cover feeder Automatic airfeed with nipping Foot print 3500 x 1520 mm

rinser MBF – 40 clamps • Year: 1998. • Speed: 8.000 bph. • Direction: Clockwise. • 40 clamps. • Single treatment. • Mobile nozzle. • Safety protections.

Peiseler EW 1000 reversible clamp Manufacturer: Peiseler Type: Reversible clamp Type EW 1000 Year of construction 1971 Face plate D = 1000 mm Clamping table 2500x500 mm Voltage 220 / 380 V Power 3.5 kW Item condition: used, impeccably and top maintained. Action components: Only the Peiseler EW 1000 reversible clamp, without the Webo BR 35 V / 1250 radial drilling machine, this can be purchased individually or as a combined offer in our other auctions. Item location: 42859 Remscheid Dismantling and transport by the buyer. The dismantling, loading, as well as transport can alternatively be offered by us.

Single-ear clamps, 1-ear tube clamp, 119 pieces OETIKER® 18,5 / 30.7 OET 90 x 18.5 OET Clamping range: 15.6 - 17.8 mm 29 x 30.7 OET Clamping range: 26.5 - 30 mm Material: Stainless steel Other quantities on request ! New ! Dimensions ( packaging ): 200 x 140 x 40 mm