Category: 304 thermoforming machines / Thermo forming machines
Latest update: 24.10.2023 add to watchlist
approved
dealer
item-No.: 137466795
New in: 2000

used

check Seller: SAMPLAST GmbH
Location: 32130 Enger, 93 Spenger Str., 32130 Enge Land-de
VS

add to watchlist

Gabler D600 Thermoformer, age 2000:- Unwind Stand Indramat Servomotor Indexing. Top & Bottom Heaters, total Capacity 73.9 kW Indramat Servomotor Forming Station Forming area: 600 x 320 mm Depth of draw neg./pos.: 40/15 mm Stacking and counting Station Counted/ Stacked Products transferred automatically to Delivery Conveyor Waste Material Winder Main Machine PLC Controller: Siemens SIMATIC S5 P3 3A Heater PLC Controller: Siemens SIMATIC S5 95U Operator Touch Pad Control Panel (OPC) : Siemens SIMATIC OP27 Machine has been refurbished in 2014, New set of Cams added during Refurbishment. Excellent Production Condition

Category: 304 thermoforming machines / Thermo forming machines
Latest update: 01.03.2024 add to watchlist
approved
dealer
item-No.: 153054774
New in: 1988

used

check Seller: MJS-LINE GmbH
Location: Land-ch

add to watchlist

M. No.: 3284 Equipment / Additional information: (min.) material thickness: 0.65 mm (max.) material thickness: 2 mm Technical Data: Width of film, max./min. 450/350 mm Forming area max. 430 x 160 mm Drawing depth max. negative/positive 6/20 mm (on request 22 mm negative) Top heater max. 10,15 kW Driving motors 3,0 kW Total connected load at 100 % duty cycle 12,7 kW Working air pressure 6 bar Air consumption (dependent on product) max. 1250 I/min Rate of water flow max. 1,0 m3/h COMPACT AND ROBUST - giving continuous high output. Easy and ergonomical operation (e.g. take- off height 1300 mm). QUICKLY CHANGEOVER - from 30° to 90° foil feed giving maximum material utilisation for both square and round lids. Heater changeover problem-free. PRECISION - The accuracy of the form table movement is guaranteed by linear guide bearings and hardened rods. The safe ...

Category: 304 thermoforming machines
Latest update: 29.03.2024 add to watchlist
approved
dealer
item-No.: 163677496
New in: 2007

used

check Seller: Innovac GmbH
Location: Deutschland Land-de

add to watchlist

Forming surface: 750x436mm, heating output: 155kW, max. compressed air supply: 10bar, weight: 9.2t, operational hours counter: 43,589h.

Category: 304 thermoforming machines / Thermo forming machines
Latest update: 02.11.2023 add to watchlist
item-No.: 162749746
New in: 2011

used

Seller: MachinePoint
Location: Land-es

add to watchlist

Material : PP, PET, HIPS // Forming Area (Vxh): 800x550

Category: 1200 machines and plants for process engineering
Latest update: 29.03.2024 add to watchlist
approved
dealer
item-No.: 163419774

used

check Seller: Foeth
Location: Barneveld Land-nl

add to watchlist

* General * SKU218U113 * LocationBarneveld * MakeWLS Gabler Spheronizer * Main Features * MaterialStainless steel * Motor3 KW * Specified Features - Noduliser * MaterialStainless steel * Nodulisercheck * Disc diameter600 mm * With outletcheck * With covercheck * Motor3.0 kW, 230/400, 1400 rpm * With variable speed drive(frequency control) * With spraying nozzlecheck * Information * Mounted on framecheck * With switchcheck * With switchgearcheck (as is) * Floorspace1,4x0,8 m * Total height1,9 m * Weight650 kg * Extra SpecificationsIncluding: 1x Single Temperiertechnik heating units STW 150/1-9-20-K1S: 9 kW: 400 Volt NodulisersWLS GablerCompactors > NodulisersBrand > WLS Gabler What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The ...

Category: 1200 machines and plants for process engineering
Latest update: 29.03.2024 add to watchlist
approved
dealer
item-No.: 163420999

used

check Seller: Foeth
Location: Barneveld Land-nl

add to watchlist

* General * SKU321S566 * LocationBarneveld * MakeWLS Gabler (D), Pressquick PQ 12 * TypeE-60/10 D * No.12355 * Year of constructionUnknown * Main Features * Motor3 KW * Inlet diameter345 mm * L/D3 * Specified Features - Single screw extruder * Single screw extrudercheck * Screw diameter60mm, Screw length 180mm * L/D3 * With jacketcheck * AC-motor3.0 kW, 220/380 Volt * With variable speed drivecheck * Screw speed9-89 Rpm * Inlet345x250mm * Feeding with hopper- incl. mixer * MaterialStainless steel * Information * With switchgearcheck * Total height1.35 M * Weight560 Kg * Floorspace1.8 x 0.7 M * Extra Specifications: Without die plate Single screw extrudersWLS GablerExtruders > Single screw extrudersBrand > WLS Gabler What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome ...

Category: 1200 machines and plants for process engineering
Latest update: 29.03.2024 add to watchlist
approved
dealer
item-No.: 163421457

used

check Seller: Foeth
Location: Barneveld Land-nl

add to watchlist

* General * SKUR1123 * LocationBarneveld * MakeWLS Gabler Maschinenbau KG (D) * TypeDE 100/100 * No.12482 * Year of construction1992 * Main Features * Motor18.5 KW * Inlet diameter100 mm * L/D9 * Specified Features - Double screw extruder * Double screw extrudercheck * Screw diameter100mm * L/D9.4 * Co-rotatingcheck * Number of heating zones:2 * AC-motor18,5 kW 380/660 Volt * Feeding with hoppercheck * MaterialStainless steel * Information * With switchgear( as is ) * Total height1,7 M * Weight2150 Kg * Floorspace2,5x1,3 M * Extra SpecificationsIncluding 1 piece Single Temperiertechnik heating units STW 150 / 1-9-20-K1S 9 kW 400 Volt including 2 spare screws Double screw extrudersWLS GablerExtruders > Double screw extrudersBrand > WLS Gabler What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination wo ...

Category: 303 blow moulding machines
Latest update: 29.03.2024 add to watchlist
item-No.: 163469685
New in: 2013

used

Seller: Exapro
Location: Land-by
Price: 342.000 € add to watchlist

SWING thermoforming machine with preheating station 2heat (using a complete 8-socket mold with a stacking device for manufacturing PP-stack.) Complete thermoforming machine SWING, made in GABLER Thermoform GmbH & Co., 2014 Designed for the manufacture of plastic cups of PP, PS, PET, HIPS and other thermoforming polymers using cutting punch (molding and cutting down together). Manufacturer: GABLER Thermoform GmbH & Co., Germany. Date of acceptance to accounting: 04/30/2014. Main technical characteristics: Area of forming surface, mm Maximum - 450x220 Minimum - 430x180 Maximum width of the tape, mm 480 Maximum tape thickness, mm 2 Maximum depth of molding, mm 125 Maximum noise level, dB Not more than 80 Tact at idle, tact / min 44 Mechanical performance, cycles / min 21-25 Voltage 230 / 400V, 50Hz Total power consumption, kW 64.15 Operating air pressure, bar 8 Dimensions (l ...

Category: 304 thermoforming machines
Latest update: 29.03.2024 add to watchlist
item-No.: 163469694
New in: 2017

used

Seller: Exapro
Location: Land-tr
Price: 353.000 € add to watchlist

The thermoforming machine is designed for producing deep-drawn formed parts using heated plastic film. The machine features a controlled unwinder to feed the plastic film from a roll and a toothed conveyor belt for automatic transportation through the machine. The film is heated from above and below in the heating station, then vacuumed and compressed air is used to pull it into a mold for deep-drawing. After cooling, the outer contours are trimmed, and the individual blanks are held in place by retaining collars. In the stacking station, the product blanks are pressed out of the film and stacked on a conveyor belt, which transports them out of the machine once a set amount is reached. The entire process is automated based on programmed specifications, except for the manual removal of finished workpieces at the outlet. The trimming and stacking stations can be adjusted for different prod ...

Category: 1200 machines and plants for process engineering
Latest update: 29.03.2024 add to watchlist
approved
dealer
item-No.: 163659753

used

check Seller: Foeth
Location: Barneveld The Netherlands Land-nl

add to watchlist

* General * SKU391U1099 * LocationBarneveld * MakeWLS Gabler * TypeR-250 * No.12850 * Year of construction2001 * Main Features * MaterialStainless steel * Motor0.37 KW * Inlet diameter100 mm * Specified Features - Noduliser * Nodulisercheck * Disc diameter250 mm * Disc depth150 mm * With outlet20 x 60 mm * With covercheck * Motor0,37 kW, 180Volt, 3000rpm * With variable speed drivecheck * MaterialStainless steel 1.4552, Stainless steel 1.4404 * Information * Mounted on framecheck * Mounted on wheelscheck * With switchcheck * Weight250 kg * CEcheck * Floorspace0,4 x 0,8 m * Total height1,4 mNodulisersWLS GablerCompactors > NodulisersBrand > WLS Gabler What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit ...

Category: 304 thermoforming machines / Thermo forming machines
Latest update: 24.10.2023 add to watchlist
approved
dealer
item-No.: 140125862
New in: 1995

used

check Seller: SAMPLAST GmbH
Location: 32130 Enger, 93 Spenger Str., 32130 Enge Land-de

add to watchlist

Used ILLIG RDK 54 Thermoforming Line, Age 1995 Unwind Stand Indramat Servomotor Indexing Max. Film width 610 mm max. Thickness range 0.18 to 2.5 mm. Hardened Transport Rails, Double Heating, Heating Load 41.0 kW. Heaters move forwards automatically with pneumatic control Sheet Sag Control Form Area 550 x 400 mm Forming & Punching in Mold with integrated Steel Rule Die. Positive Draw 20 mm, Negative Draw 20 to 40 mm Trimming Force 50kN. Top and Lower Platens Moved by separate Indramat Servomotors Heavy duty Toggles on both upper & Lower Platen Stacking/ Counting Station Waste Material Winder Inline ILLIG RS75b Grinder with Sound Proof Housing & Controls. Suitable for PS, OPS, PP, PE, PVC etc.

Category: 304 thermoforming machines / Thermo forming machines
Latest update: 24.10.2023 add to watchlist
approved
dealer
item-No.: 140840042
New in: 1989

used

check Seller: SAMPLAST GmbH
Location: Land-de
VS

add to watchlist

Unwind Stand Preheater ILLIG VHW 72/ 2 ILLIG RDM 70K, age 1989 Thermoformer with auto-start facility SEW Eurodrive Servomotor Indexing Max. material width 730 mm Max. Indexing length 300 mm Top & Lower heaters, total connected load top & bottom heaters 74.2 kW Drive Motor 6.93 kW Auto Transport Rail Spreading for PP Sheet Sag Control Max. Forming Area 680 x 280 mm Hydraulic Plug Assist, Max. Part height 125 mm Hydraulic Power Pack Control Cabinet with Optimised Schleicher (PLC) Controls Encoder on Main Shaft Auto Lubrication Pump. Inline ILLIG UG70b Counter/ Stacker Delivery Conveyor for Counted/ Stacked Cups with Ejector Table

Category: 304 thermoforming machines / Thermo forming machines
Latest update: 24.10.2023 add to watchlist
approved
dealer
item-No.: 150397314
New in: 1990

used

check Seller: SAMPLAST GmbH
Location: 32130 Enger Land-de
VS

add to watchlist

Unwind Stand Preheater ILLIG VHW 72/ 2 ILLIG RDM 70K (refurbished in 2003) Thermoformer with auto-start facility Indramat Servomotor Indexing Top & Lower heaters Auto Transport Rail Spreading for PP Sheet Sag Control Max. Forming Area 680 x 280 mm Pneumatic Plug Assist, Max. Part height 125 mm Control Cabinet with Optimised Schleicher (PLC) Controls Auto Lubrication Pump. Inline ILLIG ÜG70B Counter/ Stacker, with delivery conveyor Inline Grinder & Blower

Category: 304 thermoforming machines / Thermo forming machines
Latest update: 24.10.2023 add to watchlist
approved
dealer
item-No.: 153944754
New in: 1993

used

check Seller: SAMPLAST GmbH
Location: 32130 Enger Land-de
VS

add to watchlist

ILLIG RDM 45/ 3 Lid forming Line, age 1993 : Auto unwind stand, Max. Roll dia. 1200 mm 2 x Roll Preheater ILLIG VHW 72/ 2 Indramat Servomotor Indexing Double Heating Oven, Total Capacity 20.35 kW Sheet Sag Control Max. Form Area 450 x 170 mm Max. material width 480 mm Max. indexing 175 mm Max. Depth of Draw female/ male 30/ 15 mm Max. cutting length 1400 mm Auto Transport Rail Spreading for PP Max. No. of Dry cycles 56 cycles/ min Finished Products are Trimmed in-Mold & discharged upwards through the Tool. Forming Station with SEW Movitrac Drive. With Encoder on Main Shaft Encoder connected to Schleicher PLC unit Counter/ Stacker Station, with Stainless Steel discharge Chute Waste Material Rewinder Central Lubrication System

Category: 304 thermoforming machines / Thermo forming machines
Latest update: 24.10.2023 add to watchlist
approved
dealer
item-No.: 153944756
New in: 1988

used

check Seller: SAMPLAST GmbH
Location: 32130 Enger Land-de
VS

add to watchlist

ILLIG STAL80 Trim Press, age 1988:- Technical data ILLIG STAL 80 :  Punching table area max. 1000 x 510 mm  Material width max. 800 mm  Infeed length 20 - 400 mm  Stroke height 200 mm  Mold height 272 mm Part height (positive and negative) max. 100 mm  Number of strokes (infinitely variable) 25 - 130 /min Trimmed Parts are stacked through the Punch Tool The Skeletal Waste is fed directly into the Grinder * ILLIG RS75 Under the Trim Press Grinder, Motor 8.3 kW, age 1995

Category: 304 thermoforming machines / Thermo forming machines
Latest update: 21.02.2024 add to watchlist
approved
dealer
item-No.: 163407231
New in: 1986

used

check Seller: USTA - Graphische Maschinen
Location: 74626 Bretzfeld Land-de

add to watchlist

Illig RDM 37/10 Thermoforming Line - Made in Germany - Year of construction: 1986 - Under & Top Heating - DIV - Moulding area: 475 x 250 mm max. - Film width: 495mm min / 150mm max. - Refurbished: new bearings, new bolts, new bushings & electronics, etc. - Fully functional - with many accessories - several different forming tools Produce cups, bowls and similar products with the ILLIG RDM37/10 pneumatic forming machine. The thermoformer with forming/stamping technology works reliably with precision mechanical drives and delivers high molded part quality and performance.

Category: 304 thermoforming machines
Latest update: 01.03.2024 add to watchlist
approved
dealer
item-No.: 162336408
New in: 1999

used

check Seller: MJS-LINE GmbH
Location: 9320 Arbon Land-ch

add to watchlist

THERMO FORMING MACHINE ILLIG RDM K 50 WITH INLINE EXTRUDER (COMPLETE LINE) M. No.: 322 Counter: 80188 hours // Power: 800-1000 kg/h Max. film width 700-800 mm Equipment / Additional information: The machine is constructed as follows: -Kuhne Extruder KF70E & Co. Extruders K45-24D -Colotronic dosing unit CSK30 with 4 components -Kuhne smooth and cooling rolls (calendering) / GA4/900; puller: BA2-1/900 -Thermoforming machine ILLIG RDM K 50 -Greiner stacking / Transfer device R3 (No.:00020) // Age: 1998 -Illig mill RS75B // Age: 1999 Fully existing infrastructure; control cabinets, pumps, etc. Heating from above and below Material PS and PP were processed 450 Ps // 350 Pp

Category: 304 thermoforming machines / Thermo forming machines
Latest update: 01.03.2024 add to watchlist
approved
dealer
item-No.: 162965282
New in: 1992

used

check Seller: MJS-LINE GmbH
Location: Land-ch

add to watchlist

Technical specifications: Rated power, kW: 11,3 Mold area, mm: 475 x 250 Max. film width, mm: 495 Min. film width, mm: 150 Max. feed length, mm: 280 Min. feed length, mm: 50 Max. drawing depth/negative, mm: 100 Number of cycles/min.-max.: 48 Consumption of air/cycle at 6 bar: 100 Nl (net-pressurized air) Heat energy to be dissipated: with top heating ca. 10 260 KJ/h with top and bottom heating ca.: 17 715 KJ/h Special equipment: Hollow floor facility available Control cabinet: included

Category: 304 thermoforming machines / Thermo forming machines
Latest update: 01.03.2024 add to watchlist
approved
dealer
item-No.: 163104517
New in: 1999

used

check Seller: MJS-LINE GmbH
Location: 9320 Arbon Land-ch

add to watchlist

M. No.: 322 // Counter: 80188 hours Max. film width 700-800 mm Equipment / Additional information: The machine is constructed as follows: -Greiner stacking / Transfer device R3 (No.:00020) // Age: 1998 -ILLIG mill RS75B // Age: 1999 Control cabinets, etc. Heating from above and below Material PS and PP were processed 450 Ps // 350 Pp

Category: 306 moulds
Latest update: 29.03.2024 add to watchlist
approved
dealer
item-No.: 163677499
New in: 2007

used

check Seller: Innovac GmbH
Location: Deutschland Land-de

add to watchlist

Machine was overhauled, including moulds and tools.

Category: 304 thermoforming machines
Latest update: 05.07.2011 add to watchlist
item-No.: 329240
New in: 1986

used

Seller: Tecplast e. K. Machinery
Location: NRW Land-de

add to watchlist

Illig deep drawing machine Type: UA 150, 14.500 h Runhour!!! Built: 1986 Closing unit Plate size: 1000 x 1500 Other max. plate size: 1000 x 1500 max. moulding area: 950 x 1450 max. Drawing depth: 600 UA 150 has upper heating small spotlight with 4 position circuit with separate control cabinet underheating has total field control, flat-fitting chip frame autom. Upper stamping system Normal construction with 2 downhill control film throughhang control Protective grille by hand 4 compartment cooling fan + 4 compartment spray nozzle cooling pre-blowers + automatic deforming, reduction frame - quick change device electron. Schleicher control in the separate control cabinet 1 clamping frame for max. mold ingescent

Category: 304 thermoforming machines
Latest update: 24.10.2023 add to watchlist
approved
dealer
item-No.: 8346545
New in: 1995

used

check Seller: SAMPLAST GmbH
Location: Billund, Denmark Land-de

add to watchlist

Due to a clearance sale this Machine is on Sale at a very special Price !! Inline ILLIG RDM 63/ 15d Thermoformer with: Auto unwind stand Auto Start System Servomotor Indexing Double heating, Sheet Sag Control Auto Rail Spreading for PP Plug assist Max. form area 750 x 305 mm Max. film width 770 mm Max. index 360 mm Max. depth of draw 150 mm Encoder on the Main Drive Shaft SCHLEICHER P-SK 2/ 126F Modern PLC Controller for Control of Form Air, Blow- off etc. Pneumatic Cylinders for automatically raising the Transport Rails after Forming Cycle. aids in removal of difficult Products from the Mold Separate Control Cabinet Machine is ready for PP

Category: 304 thermoforming machines
Latest update: 24.10.2023 add to watchlist
approved
dealer
item-No.: 137548339
New in: 2003

used

check Seller: SAMPLAST GmbH
Location: 32130 Enger, 93 Spenger Str., 32130 Enge Land-de

add to watchlist

PS, K-Resin Lid Mold for the ILLIG RDM 58/ 3, dia. 120 mm, 8 Cavity, together with associated stacker Parts

Category: 407 thermoforming machines
Latest update: 24.10.2023 add to watchlist
approved
dealer
item-No.: 137548337
New in: 1990

used

check Seller: SAMPLAST GmbH
Location: Land-de

add to watchlist

Unwind Stand Preheater ILLIG VHW 72/ 2 ILLIG RDM 70K Thermoformer with auto-start facility Indramat Servomotor Indexing Top & Lower heaters Auto Transport Rail Spreading for PP Sheet Sag Control Max. Forming Area 680 x 280 mm Pneumatic Plug Assist, Max. Part height 125 mm Control Cabinet with Optimised Schleicher (PLC) Controls Auto Lubrication Pump. Inline ILLIG ÜG70B Counter/ Stacker, with delivery conveyor Inline Grinder

Category: 2500 miscellaneous
Latest update: 29.03.2024 add to watchlist
approved
dealer
item-No.: 163485646
New in: 2007

used

check Seller: GINDUMAC GmbH
Location: Land-cz

add to watchlist

This ILLIG SB 74E-9 vacuum forming and punching machine for plastics was made in the year 2007 in Germany. The machine has a working area of 505 x 775 mm.

You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)
Banner ad information  
RESALE used machinery 25 years online