used GYS PLASMA CUTTER Plasma Cutting Systems

Including matching transport trolley; equipped with cutting torch; various interchangeable cutting heads; helmet; Equipped with earthing terminal

Plasmacutting machine for plates amp; tubes! Type: MG 12001.35PPr + CH1200PP 2 plasma cutting heads Hypertherm HPR130 powersource Esab Kjellberg Fine Focus 800 powersource

Plasmacutting machine for plates amp; tubes! Type: MG 12001.35PPr + CH1200PP 2 plasma cutting heads Hypertherm HPR130 powersource Esab Kjellberg Fine Focus 800 powersource

A vacuum former used in the illuminated sign making industry, but has other applications as well. Bought in December 2017, has been used less than 100 hours. In a very good condition. Manufactured by Computerized Cutters Inc. Original price 43 545€. Shipping dimensions 1650 mm x 2400 mm x 2400 mm ( L x W x H ) ( 65 inch x 95 inch x 95 inch ) weight 700 kg ( 1543 lbs ) Operating area 3000 mm x 3500 mm ( 118 inch x 137 inch ) Sheet size 1500 x 2000 mm ( 59 inch x 79 inch ) 2. Minimum thickness 2 mm ( 0.078 inch ) 3. Maximum thickness 5 mm ( 0.196 inch ) 4. Maximum size to form 1300 mm x 1800 mm ( 51 inch x 110 inch ) depending on used material and form of the mold. Material PET-G, Polycarbonat, acrilic, PVC, ABS, etc, Vacuum pump. Type 12 PBO Capacity 7 CFM (12 m3 / hr) Vacuum 10 mbar ( 0,145 PSI ) Vacuum. Used vacuum level-0.9 bar ( -14.5 PSI ) Content vacuum t ...

Manufacturer : Sidel Model: 99000863608   Power supply: 220 V Cutting capacity: ? 60 - 160 mm Maximum length 400 mm Maximum number of simultaneous cuts: 4

Manufacturer : Stephan Model: UM44 Year : 2001 Type : Cutter Application: mixing, reducing, cutting, kneading Total volume: 44 L Useful volume: max. 35 L Max. temperature: 95?C Drain: manual through lid or tilting. Power: 2.2 / 4 / 5.5 kW Dimensions (closed): 525 x 800 x 1200 Display: T?C / Time / Speed Documentation available.

Manufacturer: Cruells Cruells Model: C30 Year : 1996 Type : cutter   Bowl volume: 30 L Number of knives : 3 Weight : 210 Kg Tilting lid

RÜHLE FROZEN BLOCK CUTTER, TYPE GFR 450 Technical description: Guillotine for cutting frozen meat and other types of frozen blocks such as frozen fish blocks, frozen blocks of vegetables and fruits to minus 20 degrees Celsius. The Ruhle guillotine achieves a capacity of up to 3000 kg/h and has also been adapted for inclusion in the technological line. The device has been equipped with 4 vertical cutting knives, which allows fine shredded cut block. A separate container for felling and very accurate feeding of the trolley to the finished product minimizes the loss of raw material. Maximum cut dimensions of the block: 450×250 (mm)

CONTI-WELD PLASMA CUTTING EQUIPMENT TYPE 60 H CONTI-PAC -60 amp -Snijcapaciteit in staal 20 mm -Ingebouwde luchtdrukregelaar -Met toebehoren -Documentatie -400V DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (3 km from the German border)

CNC Portal Plasma Cutting Machine + Autogen Manufacturer: Messer Type: Omnimat L 5600 Built: 1999 CNC control: Omnicom Track width: 5,600 mm Career length: 25 m Working range: 4 x 22 m 1 plasma torch with hypertherm HD3070 power source 2 car-gene burners 1 powder marker Suction table Filter system Donaldson

CNC Portal Plasma Cutting Machine Manufacturer: Zinser Type: 2425 N Built: 2007 CNC control: CNC2050 1 plasma burner with power source Kjellberg HiFocus 160i Working area: 2x4 m Length: 6 m Table and filter on request

• Cutting Bridge 1 – 3x Oxy head (one broken) + 1 x 200Amp Plasma: o Year 2006 o Working area: 24m x 3150mm o Working condition • Cutting Bridge 2 – 1x Plasma Bevel Cut 360 Amp + 1x Drilling Unit with automatic lubrification o Year 2014 o Working area 30m x 3150mm o Good Condition • 2x Donaldson Aspiration Unit • 50m rails + cutting table

specifications: - air-cooled plasma cutter portable - Cutting current adjustable in 3 stages 20 - 60 A - Duty cycle 30 A / 100% ED - 60 A / 60% ED - max. cutting thickness - steel approx. 15 mm - Alu ca. 10 mm - Stainless steel approx. 8 mm - Pneumatic connection - Connection 400 V / max. 9 kVA - burner package - Ground cable - Space requirement approx. W 500 x H 750 x D 800 mm - Weight approx. 20 kg

CNC Portal Plasma Cutting Machine Manufacturer: Microstep Type: HS 4001.25 P Year of construction: 2003 CNC control: MSNC500P Working range: 2500 x 4000 mm 1 plasma torch with power source Kjellberg HiFocus 100 Filter system Kemper 8000

CNC Portal Plasma Cutting Machine Manufacturer: Messer Type: Omnimat L5000 Year of construction: 2000 CNC control: Fanuc Working area: 3000 x 6000 mm Extension possible 1 plasma torch with Hypertherm HT2000 power source 3 oxy-fuel burners without table without filter

Specifications: - Pipe diameter B 20 to 1200 mm - x – axis 3000 mm - Y - axis 1500 mm - Oxy-fuel + plasma operation - Plasma cutter Kjellberg PA – S40 CNC - mot. driven container turning device - Plant is mounted on steel plate - Space requirement approx. L 6000 x W 2900 x H 2900 mm - Weight approx. 10000 kg

CNC Plasma Cutting Machine Manufacturer: Messer Type: Metalmaster 3015 CNC control: Global Control S Year of construction: 2011 Retrofit 2019 Working range: 1,500 x 3,000 mm 1 plasma torch with power source Kjellberg HiFocus 280i

CNC Portal Plasma Cutting Machine Manufacturer: Messer Type: Multitherm 4000 CNC control: Global Control Plus Year of construction: 2008 Retrofit: 2019 Suction table: 2,000 x 3,000 mm 1 oxy-fuel burner ALFA 1 plasma torch Power source Kjellberg HiFocus 280i Filter system Z-Line 9 ZDC

Machine type plasma inverter cutting machine Make Jess Type JETARC Plasma 30 i Supply voltage 1 x 230 volts Setting range 10 – 30 amps Duty cycle 35 % ED at 30 amps 60% ED at 25 amps 100% ED at 21 amps Current adjustment infinitely variable separation cut 10 mm quality cut 8 mm Cooling inverter by built-in fan Cooling burner compressed air-cooled, 50 ltr/min at 4.5 bar Portable assembly system version Fuse 16 Ampere Dimensions L x W x H 480 x 165 x 290 mm Weight with burner 11 kg Age 6 months Condition workshop tested, as new incl. UVV test protocol Scope of delivery plasma cutting system with the following accessories: 1 hand cutting torch FHT-EX 30 H, 4 mtr. long 1 piece ground cable, 6 mtr. long 1 piece carrying case impact-resistant, waterproof 1 piece instruction manual Warranty 24 months from date of delivery List ...

Machine type plasma inverter cutting machine Make Jess Type JETARC Plasma 45 i Supply voltage 3 x 400 volts Adjustment range 10 – 45 amperes Duty cycle 80 % ED at 45 amps 100% ED at 40 amps Current adjustment infinitely variable separation cut 25 mm quality cut 12 mm Cooling inverter by built-in fan Cooling burner compressed air cooled at 90 ltr/min at 4.5 bar Portable assembly system version Fuse 16 Ampere Dimensions L x W x H 470 x 180 x 230 mm Weight with burner 13 kg Age 6 months Condition workshop tested, as new incl. UVV test protocol Scope of delivery plasma cutting system with the following accessories: 1 hand cutting torch FHT-EX 45 TT, 4 mtr. long 1 piece ground cable, 6 mtr. long 1 piece carrying case impact-resistant, waterproof 1 piece instruction manual Warranty 24 months from date of delivery List price dire ...

Machine type plasma inverter cutting machine Make Jess Type JETARC Plasma 100 i Supply voltage 3 x 400 volts Adjustment range 30 – 100 amperes Duty cycle 50 % ED at 100 amps 100% ED at 80 amps Current adjustment infinitely variable separation cut 50 mm quality cut 35 mm Cooling inverter by built-in fan Cooling burner compressed air cooled Portable assembly system version Fuse 32 Ampere Dimensions L x W x H 560 x 265 x 400 mm Weight with burner 24 kg Age 6 months Condition workshop tested, as new incl. UVV test protocol Scope of delivery plasma cutting system with the following accessories: 1 hand cutting torch FHT-EX 105 RTX, 4 mtr. long 1 piece ground cable, 6 mtr. long 1 piece instruction manual Warranty 24 months from date of delivery List price directly ex works 3.020,00 € + VAT Price kpl. with above accessories 2.5 ...

Machine type plasma inverter cutting machine Make Hypertherm Type Powermax 105 SYNC Serial No. 059.650 Supply voltage 3 x 400 volts Setting range 30 – 105 amps Duty cycle 80 % ED at 105 amps 100% ED at 94 amps Current adjustment infinitely variable separation cut 50 mm at 125 mm/min quality cut 32 mm at 500 mm/min Cooling inverter by built-in fan Cooling burner compressed air cooled Portable compact system version Fuse 32 Ampere Dimensions L x W x H 590 x 275 x 510 mm Weight with burner 45 kg Age 6 months Condition workshop tested, as new incl. UVV test protocol Scope of delivery plasma cutting system with the following accessories: 1 piece plasma hand cutting torch 75°, 7.6 mtr. long 1 piece ground cable 1 piece instruction manual Warranty 24 months from date of delivery List price directly ex works 8.600,00 € + VAT  ...

CNC Portal Flame Cutting Machine Manufacturer: Messer Type: Easytherm 4000 Year of construction: 2004 Control: Global Control Working area: 3000 x 1200 mm Running track: 15 m with HEB beam 2 oxy-fuel burners ALFA 1 plasma torch with power source Kjellberg FineFocus 800 Filter system Torit

Inv. Num. : 6623 Type: RUR Control Automati Producer: Pierce Created: 2006 Parameters: Control system: BURNY 10 LCD Working table length: 6000 mm Working table width: 1600 mm Plasma source: KJELLBERG HiFocus 130 Equipment: Flow Control Fine Focus Labeling device LeibInger JET 2 SE

Offer 22497 Plasma Cutter Specifications: - Air-cooled plasma cutting system, mobile - Cutting current adjustable in 2 steps 32 + 50 A - Duty cycle 30 A/ 100% ED - 50 A/ 35% ED - max cutting thickness - steel approx. 10 - 15 mm - Alu approx. 15 mm - Stainless steel approx. 10 mm - Cutting gas, compressed air/compressed air - Air connection 6 bar - Connection 400 V / 16 A - with: - Burner package approx. 6000 mm - Ground cable approx. 3000 mm - Space requirement approx. W 480 x H 900 x D 850 mm - Weight approx. 120 kg