We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
used
* GUK S 720 Stream delivery Year of construction: 2008 M4 control Available now!
used
Flatpile Feeder, 4 Pockets, Delivery
used
GUK Slitting Machine RS 21/760 Technical details: -No double bows, false bows and no risk of mixing! -Insensitive to static charge -approx. 20% cost savings compared to processing batch goods -Automatic control of the cutting position -Synchronous control of the print mark -Installation of code readers additionally possible -Storage in maintenance-free needle and ball bearings -Paper roll on top, single or double roll stand -With and without integrated adhesive table -Drive left or right, with chain or timing belt -Smallest fold 15 mm -With automatic roller changer ARW 21 Specifications: -Min. format: (WxL) 60 mm x 105 mm -Format: (WxL) 210 mm x 315 mm -Roller outer diameter: max. 600 mm -Roll core diameter: Europe 70 mm USA and Japan 76 mm or 152.4 mm or 3 inch or 6 inch -Power: 300/minute, depending on section length -Capacity: For paper roll by. 600 mm, sectio ...
used
6 Pockets, 2 Knives
used
mobile sword folding unit
used
Folding unit GUK FA 50-2 2nd station; good condition; cleaned and tested; Inlet width 500mm; 2 folded pockets; Self-control. Folding unit GUK FA 50-2 secound unit; good condition; cleaned and checked; working witdh 500mm; two pockets; Automatic control.
used
Pocket folder GUK FA 36-4 /SAF 36; good condition; cleaned and tested; Folding rollers need to be replaced; Format 36x45cm; 4 folded pockets; smallest fold 26mm; automatic suction feeder SAF 36; Double sheet inspection DBK 36; Shed display. Pocket folding machine GUK FA 36-4 /SAF 36; good condition; cleaned and checked; folding rollers must be changed; size 36x45cm; four pockets; smalest fold 26mm; automatic vacuum feeder SAF 36; double paper control DBK 36; Stream Delivery Unit.
used
GUK K72/4-KTL-P2 Year 1990 Gremser feeder 4 cassettes 2 knives Gluing Device Delivery in production
used
Width 52 cm Year of construction 1992 Flat stack feeder with suction head Counter MCS 106 4 fold plates in the parallel break section Segmented folding rollers downstream knife shaft 2 folded swords in the cross-fracture section 1 further fold pocket after the 1st cruciate rupture Shed display Price on request. We deliver and install worldwide!
used
Width 72 cm Year of construction: 1992 Pallet feeder with suction head 4 fold pockets in the parallel fracture section 2 folding swords in the cross-breaking area 1 more fold pocket after the 1st cross break Noise absorbing hood downstream knife shaft Shed display Delivery date: immediately from stock Price on request. We deliver and install worldwide!
YEAR: 1987 FA 46/2 R1 SAF 46 WITH; 2 X BUCKLES, BATCH COUNTER, SOUND HOODS AUTOMATIC SUCTION FEEDER, HOOK-ON DELIVERY IN GOOD WORKING ORDER AND AVAILABLE IMMEDIATELY
used
4 buckles
used
Folding machine GUK SAF 35/2 Year of manufacture 1981 2 cassettes Art,No. PS5983 Price 850€ FCA Germany
used
Sell a GUK folding machine Cartonac 2000-2 on behalf of a customer More information on request.
used
Max. size= 80 x 52 cm, Availability= 022024, Flat stack feeder - Parallel fold unit with 4 buckle plates - First cross fold - Buckle fold underneath first cross fold - Second cross fold to the left - Noise hood over the entire folding section Stream Delivery 32 page folding machine Technical data: Max. format: 520 x 800 mm Min. format: 150 x 210 mm Speed: 40,000 sheets/hour LOT Loaded in truck or container
used
Max. size= 35 x 35 cm, Availability= 072023, Antique folding machine 35 cm with 2 buckle plates - in working condition - exhibit LOT Loaded in truck or container
used
Max. size= 65 x 49 cm, Availability= 032023, LOT Loaded in truck or container
used
GUK K74/4 KLL R6 - 32 pages year 2005 max. size 74 x 144 cm continuos feeder R6 4 cassettes 2 knives 1 mobile knife ZK 500 stream delivery S 720 delivery press Desta BAS 500 working condition available immediately
used
Gremser Flat Pile Feeder 4 bags in the 1st movement 4 bags in the 2nd movement Noise abatement Machines ControlBand delivery
used
Gremser Flat Pile Feeder 4 fold pockets 1 sword fold Noise protection hood Machines Control and Counters Tape delivery
used
; operational
used
GUK Cartonac 81 Stand Alone with EK 300 sheed Discharge GUK Folder FA21 / 4 S2 SVA 730 Cartonac 91 with mobile base 3 folding pockets, 2 blind pockets Feed table with sideshift for plano formats max. 215 x 450 mm Min. Format unfolded 90 x130 mm Power 300 FS / min Suspension device for shed discharge EK 300 Control cabinet right, Min. Unfolded format: 60 x 15 mm Optional: Max. Unfolded: 215 x 450 mm Paper weight 50-60gr / m² (single-layer), 37-50gr / m² (multi-layer) Space requirements. 1,20m x 1,40m Power requirement: 2,1KW, 400V 3 Ph, 50 HZ Compressed air requirement: 6 bar / 15l / min (for control switch or optional pneumatic marking device) Stepless mechanical drive for folding machine Pressure-vacuum pump. included Mobile substructure Code reader Argus 4 counter drive motor
used
GUK Cartonac 81 Stand Alone with EK 300 sheed Discharge GUK Folder FA21 / 4 S2 SVA 730 Cartonac 91 with mobile base 3 folding pockets, 2 blind pockets Feed table with sideshift for plano formats max. 215 x 450 mm Min. Format unfolded 90 x130 mm Power 300 FS / min Suspension device for shed discharge EK 300 Control cabinet right, Min. Unfolded format: 60 x 15 mm Optional: Max. Unfolded: 215 x 450 mm Paper weight 50-60gr / m² (single-layer), 37-50gr / m² (multi-layer) Space requirements. 1,20m x 1,40m Power requirement: 2,1KW, 400V 3 Ph, 50 HZ Compressed air requirement: 6 bar / 15l / min (for control switch or optional pneumatic marking device) Stepless mechanical drive for folding machine Pressure-vacuum pump. included Mobile substructure Code reader Argus 4 counter drive motor
used
GUK Cartonac 81 Stand Alone with EK 300 sheed Discharge GUK Folder FA21 / 4 S2 SVA 730 Cartonac 91 with mobile base 3 folding pockets, 2 blind pockets Feed table with sideshift for plano formats max. 215 x 450 mm Min. Format unfolded 90 x130 mm Power 300 FS / min Suspension device for shed discharge EK 300 Control cabinet right, Min. Unfolded format: 60 x 15 mm Optional: Max. Unfolded: 215 x 450 mm Paper weight 50-60gr / m² (single-layer), 37-50gr / m² (multi-layer) Space requirements. 1,20m x 1,40m Power requirement: 2,1KW, 400V 3 Ph, 50 HZ Compressed air requirement: 6 bar / 15l / min (for control switch or optional pneumatic marking device) Stepless mechanical drive for folding machine Pressure-vacuum pump. included Mobile substructure Code reader Argus 4 counter drive motor
used
GUK Cartonac 81 Stand Alone with EK 300 sheed Discharge GUK Folder FA21 / 4 S2 SVA 730 Cartonac 91 with mobile base 3 folding pockets, 2 blind pockets Feed table with sideshift for plano formats max. 215 x 450 mm Min. Format unfolded 90 x130 mm Power 300 FS / min Suspension device for shed discharge EK 300 Control cabinet right, Min. Unfolded format: 60 x 15 mm Optional: Max. Unfolded: 215 x 450 mm Paper weight 50-60gr / m² (single-layer), 37-50gr / m² (multi-layer) Space requirements. 1,20m x 1,40m Power requirement: 2,1KW, 400V 3 Ph, 50 HZ Compressed air requirement: 6 bar / 15l / min (for control switch or optional pneumatic marking device) Stepless mechanical drive for folding machine Pressure-vacuum pump. included Mobile substructure Code reader Argus 4 counter drive motor