used GS MISCHTECHNIK Concrete machines for mixing stationary

Connected load: 55kW, weight: 6.8t.

Capacity: 800/1040l, max. operating temperature: 50°.

Dissolver Agitator Geppert Mischtechnik FRW Power 6.3 kW electric winch Speed range 320-2250 1/min mobile, mobile on castors Very good condition, straight from production!!

Dissolver Agitator Geppert Mischtechnik FRW Power 5.5 kW electric winch Speed range 320-2250 1/min mobile, mobile on castors Very good condition, straight from production!!

* General * SKU354T991 * LocationBarneveld * MakeRuberg Mischtechnik KG * No.RMG 10/1647 * Year of construction2000 * Pressure * Working pressure0 Bar * Working pressure jacket3 Bar * Main Features * MaterialStainless steel * Volume10 Ltr. * Motor11 KW * Specified Features - Paddle mixer * Continuous mixercheck * Useful capacity± 10 Ltr. * Trough sizesDia: 140x940 mm * InletDia: 64 mm * OutletDia: 75 mm * With jacketcheck capacity 10 Ltr. * Max. temperature110 °C * Glands air purgedcheck * Motor11 kW, 400 Volt, 2950 rpm * MaterialStainless steel 1.4301 (304) * Information * Mounted on framecheck * With switchcheck * With switchgearcheck( as is) * Floor space2,8x1,1 m * Total height1,9 m * Weight700 kg * Extra SpecificationsComes with an additional pin rotor. Paddle mixersRuberg Mischtechnik KGMixers > Paddle mixersBrand > Ruberg Mischtechnik KG What you can expect from Foeth: -- Machin ...

* General * SKU309T740 * LocationBarneveld * MakeBEBA Mischtechnik * TypeBM 800 * Main Features * MaterialStainless steel * Motor3 KW * Rotor70 mm * Specified Features - Foam mixer * Foam mixeroscillation method * Rotor/Stator with pinscheck * Rotor sizesdia. 70 mm * InletDN25 * OutletDN25 * Motor3 kW 400-690 Volt * With frequency controllercheck * With MonopumpNetzsch NM021RY * Motor0,75 kW Netzsch NM021RY * Speed301 rpm * Capacity40-300 Ltr/h * MaterialStainless steel 1.4571 (316Ti) * Information * With switchgearcheck * Floorspace2,5x1,2 m * Total height1,1 m * CEcheck * Weight680 kg * Extra SpecificationsWith tank: ± 200 Ltr., with jacketFoam mixersBEBA MischtechnikMixers > Foam mixersBrand > BEBA Mischtechnik What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome  ...

* General * SKU283U516 * LocationBarneveld * MakeRuberg-Mischtechnik KG * TypeVM1500 * No.VM1500/1639 * Year of construction2000 * Pressure * Working pressure0 Bar * Vacuum possiblecheck * Main Features * MaterialStainless steel * Volume1500 Ltr. * Motor22 KW * Specified Features - Ribbon blender * Ribbon blendercheck * Capacity1932Ltr. * Useful capacity1500Ltr. * Trough sizesDia: 1350x1350mm * InletDia: 300mm, 80mm * Manhole485x1000mm * OutletDia: 200mm * Interrupted ribboncheck * Max. temperature40°C * Motor22kW, 400Volt, 1465rpm * Speed mixing shaft28 rpm * MaterialStainless steel 1.4571 (316Ti) * Information * Total height2,1m * Weight2400kg * Floor space2,1x1,6mRibbon blendersRuberg Mischtechnik KGMixers > Ribbon blendersBrand > Ruberg Mischtechnik KG What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to an ...

1 piece of used scraper / scraper Manufacturer: Liebherr Type: LSM 16/11 Completely overhauled/repaired in 2022 Year of construction 2009 In perfect condition AT CALL Location: Southern Germany Price on request Offer and prices are purely net ex location Subject to prior sale, errors and/or misrepresentations excepted, without guarantee and/or warranty, as seen, lying and/or standing

Mat bending machine Hambi TV 30 V ============================= reinforced design, up to single rod 12 mm, Passage width: 3 meters, Weight: 645 kg

Max. grain size: 32mm, max. delivery pressure: 75bar, max. rotational speed: 1500/min, max. hydraulic pressure: 300bar, connected load: 45kW, weight: 2.5t, operational hours counter: 2990h, with single-axle chassis, four support legs and cable remote control.

2 BRINKMANN screed Boy built in 2005 and 1996 for sale immediately from stock, without guarantee and warranty

Stationary air compressor Lutos Oil-free air blower Ask for an offer iNTER-WiBA Sp.J. UL. Krakowska 263 PL 43-305 Bielsko-Biała USt-IdNr.: PL547-17-47-669 Tel. 0048/33 812 58 60 fax. 0048/33 812 58 36 abc.inter-wiba.com.pl info@inter-wiba.com.pl

WSM Stationary screwdriving unit screwdriving station Assembly of parts for car radios and navigation systems and for testing them. The assembly station is surrounded by a protective enclosure. The service doors are equipped with interlocking monitoring switches. The doors are locked in automatic mode and can only be opened when the automazik stop or in manual mode after pressing the doors on the control panel. When the door is open, automatic operation cannot be started. Functional sequence The station is equipped with the pre-assembled assembly via the transfer belt. The work steps of the automatic station with a run of a WT are described below. In normal operation, all 3 stations work in parallel. - Positioning the WT with the pre-assembled assembly in St.2.1 - Lowering the wearer with the scanner and the vision sensor - Scanning of the 3 codes (front panel, fro ...

stationary transition, stationary crossing EUROLINE 512 Size 6 5126306 Step load: max. 150 kg Total load: max. 300 kg DIN EN ISO 14122 Clear height ( inside ): 1210 mm handrail with knee bar installed on both sides, Height: 1100 mm Climb angle: 60° 5 steps: 1000 x 180 mm Step spacing: 210 mm Platform size: 1440 x 1000 mm Platform height: 1240 mm Material: aluminum, steps: aluminum grooved used, tested ! Dimensions (assembled, length x width x height): 2760 x 1180 x 2360 mm

stationary transition, stationary crossing GÜNZBURGER STEIGTECHNIK 5100 x 3150 x 3060 mm Total load: max. 200 kg Clear height (inside): 1800 mm handrail with knee bar installed on both sides, height: 1100 mm Climb angle: 45° 9 Steps: 800 x 240 mm Step spacing: 225 mm Platform size: 3100 x 800 mm Platform height: 1920 mm Material: aluminum, steps: aluminum grooved used, tested ! Dimensions (assembled, length x width x height): 5100 x 3150 x 3060 mm

stationary transition, stationary crossing PAGUS 4200 x 2600 x 2510 mm Clear height ( inside ): 1400 mm handrail with knee bar installed on both sides, height: 1000 mm Climbing angle: 45° 7 steps: 900 x 240 mm Step distance: 190 mm Platform size: 2450 x 900 mm Platform height: 1500 mm Material: steel ( galvanized ), steps: steel, grating ( galvanized ) used, tested ! Dimensions (assembled, length x width x height): 4200 x 2600 x 2510 mm

stationary transition, stationary crossing PAGUS 4640 x 4600 x 2420 mm Clear height ( inside ): 1330 mm handrail with knee bar installed on both sides, height: 1100 mm Climb angle: 45° 7 steps: 990 x 270 mm Step spacing: 190 mm Platform size: 4480 x 1040 mm Platform height: 1430 mm Material: steel, steps: steel, grating ( galvanized ) used, tested ! Dimensions (assembled, length x width x height): 4640 x 4600 x 2420 mm

stationary transition, stationary crossing GÜNZBURGER STEIGTECHNIK 4500 x 4220 x 2340 mm Total load: max. 200 kg Clear height (inside): 1100 mm handrail with knee bar installed on both sides, height: 1100 mm Climb angle: 60° 4 steps: 2x 800 x 200 mm / 1x 600 x 200 mm Step spacing: 250 mm Platform size: 3200 x 800 mm / 2660 x 800 mm Platform height: 1210 mm Material: aluminum, steps: aluminum grooved used, tested ! Dimensions (assembled, length x width x height): 4500 x 4220 x 2340 mm

stationary transition, stationary crossing GÜNZBURGER STEIGTECHNIK 5960 x 1160 x 2880 mm Total load: max. 150 kg Clear height ( inside ): 1550 mm handrail with knee bar installed on both sides, height: 1100 mm Climb angle: 45° 7 steps: 1000 x 240 mm Step spacing: 225 mm Platform size: 4230 x 1000 mm Platform height: 1780 mm Material: aluminum, steps: aluminum grooved used, tested ! Dimensions (assembled, length x width x height): 5960 x 1160 x 2880 mm

stationary transition, stationary crossing PAGUS 162000 x 3470 x 2870 mm Clear height ( inside ): 1640 mm handrail with knee bar installed on both sides, height: 1100 mm 3 stairs, climbing angle: 40° 9 steps: 1000 x 270 mm Step spacing: 190 mm Platform size: 13850 x 1020 mm Platform height: 1770 mm Material: steel, steps: steel, grating ( galvanized ) used, tested ! Dimensions ( assembled, length x width x height ): 162000 x 3470 x 2870 mm

stationary transition, stationary crossing GÜNZBURGER STEIGTECHNIK 3720 x 960 x 2310 mm total load: max. 200 kg Clear height (inside): 1090 mm handrail with knee bar installed on both sides, height: 1100 mm Climb angle: 45° 5 Steps: 800 x 240 mm Step spacing: 205 mm Platform size: 1400 x 800 mm Platform height: 1210 mm Material: aluminum, steps: aluminum grooved used, tested ! Dimensions (assembled, length x width x height): 3720 x 960 x 2310 mm

Bohle stationary column for drums and containers, suitable for feeding tablet presses etc. Maximum weight 600kg.

Contec Mini 15 - Concrete mixing plant Mixer M 500/300 liter Capacity 4 - 9 m3 Aggregate hoppers: 2 x 2.5 m3 on a stable metal frame Belts: 2 belts integrated and attached to the aggregate hoppers

1 pcs. mixer gearbox (reconditioned - AS NEW) for Liebherr ZE 3000/4500 Year of construction: 2019 reconditioned in 2020 immediate available

Teka High Performance Planetary Mixer TPZ 4500, YOC 2014 without skip hoist. For a wide range of applications and the highest demands for the production of high-quality concrete.