used GRIGGIO Thicknessing machines

Technical data/equipment: - Working width 530 mm - Strip knife shaft, 4 knives - Connection 12A, 5.6 kW, 380 V, 50 Hz - Vibration protection planer shaft cover - electr. Table height adjustment - Shaft speed 5,000 rpm

CATALOG NUMBER 6679 TECHNICAL DATA - max width of the workpiece 250mm - max height of the workpiece 170mm 6 spindles: 1) horizontal lower 250mm 5.5kW 2) vertical right 170mm 5.5kW 3) vertical left 170mm 5.5kW 4) horizontal, upper 250mm 7.5kW 5) horizontal lower 250mm 7.5kW 6) universal 250mm, adjustable at an angle of 360 ° 5.5kW - 6 electrically adjustable spindle up / down - all adjustable spindles up / down, right / left - diameter of the spindles 40mm - 6 introductory pulling rollers, toothed, including 2 double ones - 6 rollers leading out, pulling, rubber, smooth, including 2 double - 2 clamps from above - from the bottom, a roller introducing toothed, pulling, torsion in the table before the first spindle - at the bottom, 2 pulling rollers, metal, smooth - 4 side clamps at the bottom - feed on cardan shafts - pneumatically pressed rollers - smooth regulati ...

Four side planer Griggio G240 P/5U for wet Maximum planing width 240mm Maximum planing height 160mm Number of spindles 5 Spindle arrangement Bottom Rights Left Mountain Universal Drive: in the table Infinitely adjustable feed on the inverter Year 2007 Weight: 4060 CE Certificate Net price

CATALOG NO. 6873 TECHNICAL DATA - max width of the processed element 240mm - max height of the processed element 190mm 4 spindles: 1) horizontal bottom 240mm 5.5kW 2) vertical right 190mm 5.5kW 3) vertical left 190mm 7.5kW 4) horizontal top 240mm 7.5kW - all spindles adjustable up/down, right/left - spindle diameter 40mm - 6 pulling and toothed input rollers from above - 2 output, pulling, rubber, smooth rollers from above - from the bottom, a toothed input roller, pulling and turning in the tabletop in front of the first spindle - 2 pulling rollers from the bottom, metal, smooth - 4 side pressures from the bottom - feed on cardan shafts - pneumatically pressed rollers - smooth adjustment of the feed speed on the inverter 6-30m/min - 3kW feed motor - working pressure 8-10bar - electric setting of planing thickness - body lifting motor 0.75kW - central lubrication o ...

Working condition - without extraction - saw blade can be placed under 45 degrees - loading options available

Screen of plc control is defective - does not start involuntarily defective screen - charging options available - saw below 45 degrees - without extraction

Working width: 530 mm; Planing height: 250 mm; Planer shaft: strip knife; Number of knives: 4; Height adjustment: electric; Planer thickness indicator: Mechanical counter; Feed speed: 2 speeds; Feed roller: steel; Pull-out roller: steel; Table rollers: no; Motor power: 5.5 kW; Suction connection: 160mm; Machine length: 1200mm; Machine width: 1200 mm; Weight: 900kg;

Code: 0211 Brand: GRIGGIO Model: TR C/N - CE Standard Bit mortiser with tilting table - CE Standard Worktable dimensions mm 565 x 315 Head longitudinal stroke mm 240 Head transversal stroke mm 180 Head vertical stroke mm 140 Drill chuck Wescott mm 0-20 Spindle speed 3000 rpm Motor power Hp 3 Screw and eccentric woodpress Square on the plane tilting -45 / +45 degrees Revolver unit with center distances 16-22-25-32 mm Handwheel with numerical height display Wheels on base Overall dimensions mm 800 x900 x 1400 h Weight kg 260

Spindle swivel: Yes -5 to 45Â; Height adjustment: handwheel; Swivel Adjustment: Handwheel; Milling jaw adjustment: manual; Height indicator: mech. Numerator; Swivel angle indicator: mech. Numerator; Milling stop indicator: mech. Numerator; Milling spindle diameter: 30mm / new milling spindle; Speeds: 3000, 4500, 6000, 9000; Motor power: 5.5 kW; Engine braking: Yes, automatic; Suction connection: 2 x 120mm; Machine length: 2000mm; Machine depth: 1400mm; Weight: 900kg;

Griggio TC200 spindle moulder with carriage Spindle diameter 35mm Spindle total height 190mm Longitudinal carriage in the worktop Carriage length 1100mm Left and right spindle rotations Spindle speed variable on belts Spindle RPM: 3000/4500/6000/8000/1000 4kw main motor Manual spindle lifting with crank Extraction pipes 2x120mm Dimensions of the machine 120x90x125cmH 500kg

Spindle moulder Griggio T220 Spindle diameter 35mm Spindle total height 150mm Spindle speed variable on belts Spindle RPM: 3000/4500/6000/8000/1000 5.5kw main motor Manual spindle lifting with crank Four-roller feed Europa 440 Extraction pipes 2x120mm Dimensions of the machine 120x90x125cmH 500kg

Description: GRIGGIO GB 5/8 RA Edgebander Workpiece thickness: 10 - 60 mm Max thickness of the panel: 60 mm Min width of the panel: 60 mm Min length of the panel: 120 mm Min thickness of the panel: 10 mm Edge thickness: 0,4 - 8 mm Edge dimensions in roll: 0,4 - 3 mm serial number: 15E000243900300, control: SIEMENS SMART LINE, Approx. Onsite Dimension. (l x w x h): 5,500 x 1,100 x 1,600 mm, weight approx.: 2,500 kg

Description: Griggio Unica 400 Brand: Griggio Type: Unica 400 Year of construction: 2010 Main saw: ø400 mm Cutting height: 125 mm Saw tilt adjustment: 0-45 Digital readout Motor: 7.5 kW Front zipper saw: 0.75 kW, ø125 mm Roller carriage: 3,200 mm Cutting width: 1,250 mm with digital readout on sawing guide Length stop: 2,200 - 3,300 mm Adjustable support stand and roller guide Extraction: top: ø80 mm, bottom: ø120 mm swival range +/-: 45 °, Approx. Onsite Dimension. (l x w x h): 3,200 x 2,400 x 1,600 mm, weight approx.: 900 kg

Weibert FS 41 Planer - Thicknesser Planing width: 410 mm Drum: 4 turn blade shaft Motor power: 4KW n = 4500U/min, 400V Clearance height: 4-225 mm Westcott Chuck 0-16 mm Professional side the set stop WJ-300200 Special price: NET 2555,32,-

JPT-260 Planer - Thicknesser Planing width: 256 mm Drum: 3 - Strip cutter Engine power: 230V/400V 2650 W Thickness forward: 3-225 mm Feed speed: 5,5 m / min. Weight 170 kg G & JET-10000289T

WEIBERT WJ-D41 Thickness Planers WEIBERT WJ D41 NEUMASCHINE! 400V 4 KW (5.5 HP) n = 4500 RPM Planing width of 406 mm Planer shaft diameter 100 mm Max. 4mm chip removal 4 turn blade shaft Clearance height of 4-225 mm Feed speed of 6 and 12 m / min.mit private motor 1,1 KW (1,5 HP) Suction connection of 120 mm Machine weight 370 kg Machine tables Planer shaft bearing block and table management from GRAUGUÃ? Manual height adjustment with hand wheel 2 role in the thicknessing table G & WJ-D41

WEIBERT WJ-D53 Thickness Planers WEIBERT WJ D53 NEUMASCHINE! 400V 5,5 KW (7,5 HP) n = 5000 RPM Planing width 530 mm Max.Spanabnahme 8 mm Planer shaft D = 125mm 4 turn blade shaft Clearance height from 3 to 300 mm Feed speed of 8 and 16 m / min. Feed motor 1.5 KW (2 HP) Dust nozzle by 160 mm Electronic height adjustment of the Thicknesser table with display Machine table, Planer shaft bearing block and table management from GRAUGUÃ?! G & WJ-D53

THICKNESS PLANER type CASADEI R 510 second hand machine volt. 380/50 max working width mm. 510 max. working height mm. 250 min. working height mm. 3 maximum removal thickness 10 mm shaft diameter mm. 120 knives n.4 motor power Hp 5,5 weight kgs. 900

THICKNESS PLANER type SAC SUERI RS 53 S second hand machine CE mark : Yes technical details : useful working width mm. 530 maximum (minimum) working height mm. 300 (3) maximum removal mm. 8 variable feed speed by inverter m / min. 4 ÷ 16 motorized table positioning with electronic reading n.4 knives "Tersa" main motor power Hp 5,5 volt. 380/50

Weibert form7 52 digital Dressing thickness Planer Planing width 520 mm Tersa 4 drum Dressing table length 2250 mm Planing stroke 1500 mm 90 °-45 ° Machine cast iron tables 7 KW (9,5 HP) 400V 50 HZ Thicknessing table 850x520mm Passage of 3 / 240mm Electrical height adjustment of the Thicknesser table 4 speeds 5 / 8 / 12 / 18 m / min Dual opening system of the tables to the rear Max depth of cut 5 mm Speed 5000 min/1 1-suction port 120 mm Weight approx. 700 kg G & PIECES 5503511

Weibert PS 63 Tersa Thickness Planers Planing width 630 mm Dimensions thicknessing table 630 x 1000 mm Depth of cut of Max 8 mm At least 210 mm working length Working height of min. 3.5 mm Working height of Max 300 mm Blades number 4 PCs. Drum diameter 120 mm Drum speed 4500 min-1 Feed rate 5/8/12/18 m / min Electrical connection 400 V / 50 Hz / S6-40% Motor power 9.0 kW Dust nozzle diameter 150 mm Dimensions (L x W x H) Weight 750 kg G & PIECES-5220164

ADH 26C. Surface thickness Planer Dressing table (Lxw): 1120 x 275 mm Thicknessing table (Lxw): 545 x 258 mm Working height 830 mm Thickness: 5-225 mm Max depth of cut 3 mm Planer shaft diameter: 70 mm Planer blade 3 Speed 1/min 5200 Feed 5.5 m / min Engine: 1.7 kW 230V Dust nozzle diameter: 100 mm Weight 170 kg G & STÃ? 5904026 optionally with 400V

ADH 31C. Surface thickness Planer Dressing table (Lxw): 1295 x 325 mm Thicknessing table (Lxw): 545 x 308 mm Working height 850 mm Thickness: 5-225 mm Max depth of cut 3 mm Planer shaft diameter: 70 mm Planer blade 3 Speed 1/min 5200 Feed 7 m / min Motor: 2,2 kW 230 v Dust nozzle diameter: 100 mm Weight 210 kg G & STÃ? 5904031 optionally with 400V

Type MB104H Max working width 400 mm Knives 4 Feed speeds 7/14 m/min Min./max. working height 3,5-300 mm Main motor power 4 kW Suction hood diameter 100 mm

20-27-518 Reismusas WOODLAND MACHINERY (new) Type MOTO530 Max. Working width 530 mm Max. Working height 300 mm Max. Cutting depth 8 mm Engine 4kW/380V/50Hz Dimensions of the Working table 1050x532 mm Spindle rotation speed 4800 rpm Min. Working length 280 mm Knives 4-30x530x3 Electrical filing 0.5 kW Electric height adjustment 0.33 kW Feed speed 5-20 m/min Transport Dimensions Weight 835 kg