british flag
Resale Logo

GRAM used machine for sale on RESALE.INFO
all categories

back back
 banner advertisement information auctioneer  Maynards Europe GmbH  http://www.maynards.com 
banner logo
start page > keywords GRAM > results
maximum number of results exceeded > 1000
please refine your search
1000 items ordered by
post used machinery     
No. Cat. Photo Manufacturer | Model
Type of machinery
Year Price Country Contact
 page 1  > 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
125465449 1200

KLEIN BS 20 for sale
Belt Filter Press


Bandwidth: 2000 mm Access.: Control cabinet Polymer system Pump Technical documentation and circuit diagram
used machine
 
Bandwidth: 2000 mm
Access.:
Control cabinet
Polymer system
Pump
Technical documentation and circuit diagram
1987
Price  
  AT   request
125499263 109

LUNA MBC8835 for sale
Metal bundling machine Luna MBC8835


The machine is a special four-roller winder, intended for folding sheets AL m. Al. reflector. It has 3 independent lower rollers shortening the time to a minimum roll. The rollers are supported by adjustable, bearings sl ...
used machine
 
The machine is a special four-roller winder, intended for folding sheets AL m. Al. reflector. It has 3 independent lower rollers shortening the time to a minimum roll. The rollers are supported by adjustable, bearings slides for easy compensation of the deflection depending on the thickness and hardness of the material. Compensation of sagging upper roller is realized by longitudinal beam. All rollers are driven. The spinning process is carried out without slip to prevent scratching of the workpiece. CNC - equipped with an interpolation, it is a simultaneous rotation bending rolls, along with their shift. All rolls are chrome-plated and polished. All axes are programmable. The machine has the possibility of rolling difficult elliptical shapes.
2010
27,000 EU?  
  PL   request
125452315 831

HORIZON C 920 / M for sale


air table chromed display program
used machine
 
air table chromed
display
program
 
Price  
    request
125499266 109

AJAN SHP 260A for sale
Plasma cutter AJAN


Plasma cutter AJAN SHP 260A is a numerically controlled oxygen sheet cutting device, using original cutting tools mounted on it, and can be gas and plasma tools. With these tools you can make straight cuts and linear cut ...
used machine
 
Plasma cutter AJAN SHP 260A is a numerically controlled oxygen sheet cutting device, using original cutting tools mounted on it, and can be gas and plasma tools. With these tools you can make straight cuts and linear cuts, according to programmed cutting programs or by manually controlling the cutting path. Condition of the equipment good.
2015
34,500 EU?  
  PL   request
125452237 106

EUROMAC Digibend 360 for sale
horizontal boxer press


EUROMAC punching Digibend 360 capacity 36 tonnes lengh of stroke 250 mm working speed 10/24-6 mm/sec hight bending 200 mm extra high bending 415 mm oil tank capacity 60 lt aprox 3-p ...
used machine
 
EUROMAC punching Digibend 360
capacity 36 tonnes
lengh of stroke 250 mm
working speed 10/24-6 mm/sec
hight bending 200 mm
extra high bending 415 mm
oil tank capacity 60 lt aprox
3-phases motor 5.5-4 (hp-kw)
table 580 x 1170 mm
size 680 x 1170 x 1130 mm
weight 900 kg
year 2000 CE

The data are mechanically translated in the english language. Translation errors are possible. No guarantee for printed date and pricing.

• Save up to 100 bend in machine memory.
• Bend the guaranteed accurate to +/-0.05mm.
• Automated for fast, precise production.
• Reduce your set up time.
• Adjusting the machine bending pressure or working speed.
• Monoblock construction.
• Maximum flexibility for bending application (up to 10 tooling)

Benefits:

• With Euromac punching bending machine, you can change over from one type of tooling to another quickly and easily.
• Our bending table is machined from one piece tapered roller steel casting that's guaranteed for 5 year.
• Our horizontal acting bending machines give you unlimited bending capabilities, without the risk of damaging your expensive press brake tooling.
• Euromac punching bending machine are easy to program, easy to operate, and the cost of production is surprisingly low

Well in good conditions of use, which ' can be seen connected and running, by appointment.
Specification
The RAM force-tonnage (KN) 36 (160)
Length of stroke 250 mm
Table dimension 1200x580mm
Overall dimensions (W x D x H) 1250 x 650 x mm-1140 mm
Weight 900 kg
2000
6,700 €  
    request
125494845 102

GILDEMEISTER CTX 200 S2 for sale
CNC Lathe - Inclined Bed Type


turning diameter: 290 mmturning length: 365 mmcontrol: Heidenhain MANUEL GUIDEgreates pass round over bed: 440 mmx-travel: 160 mmz-travel: 350 mmspindle head: 120 H 5 mmspindle bore: 56 mmbar material dia.: 42 mmspindle  ...
used machine
 
turning diameter: 290 mm
turning length: 365 mm
control: Heidenhain MANUEL GUIDE
greates pass round over bed: 440 mm
x-travel: 160 mm
z-travel: 350 mm
spindle head: 120 H 5 mm
spindle bore: 56 mm
bar material dia.: 42 mm
spindle diameter in front bearing: 90 mm
turning speed range: 20 - 5000 U/min
spindle drive: 9 kW
no. of tools in turret 1: 12 x VDI 30
total power requirement: 22 kW
weight of the machine ca.: 4,2 t
dimensions of the machine ca.: 2,8 x 1,7 x 1,8 m
0114002271

Machine with CE

Heidenhain CNC Pilot 3190
Tool pickup device
Bar loader LNS Super Hydro BAR

C-axis (main spindle)
- speed min / 1 28
- Holding torque Nm 70
- Graduation accuracy degree <0.03

Universal disc turret with driven tools
Number of tool stations 12
   of which max. powered tools 12
   Max. Clamping diameter of the angetr. Tools 13 mm
   Drive line 40% ED kW 5.7

movable tailstock
Chip conveyor
19 hornbin collets with keys
35 x various VDI tools
Hornbuch SPANNTOP
6 x VDI 30 tools driven
Operating instructions, operating instructions, planning documents,
Transport documents and wiring diagram available

Operating hours approx. 23,300 h



This ad was created with MODUL MWS - the software solution of LogoTech.
2001
Price  
    request
125452230 103

SHW UFZ 5 S for sale
Horizontal Milling Machines


x way 4000 mm y way 1100 mm z-way 1000 mm table size 5000 x 1000 mm of Max table load 7500 kg sleeve 50 SK spindle speed range 36-6000 RPM spindle drive 26 kW torque 550 nm feed range 2-15,000 mm / min rapid traverse 15 ...
used machine
 
x way 4000 mm y way 1100 mm z-way 1000 mm table size 5000 x 1000 mm of Max table load 7500 kg sleeve 50 SK spindle speed range 36-6000 RPM spindle drive 26 kW torque 550 nm feed range 2-15,000 mm / min rapid traverse 15 / 18 m / min number of tools in magazine 66 - tool length 400 mm maximum tool diameter 125 / 250 mm tool weight 25 kg total power consumption 50 kW machine weight 27 to - machine space requirement approx. 9.5 x 6,2 x 3,5 m CNC SIEMENS 840 D horizontal Milling spindle 66-fach tool changer of NC turning tensioner as full 4th NC axis, round 1400 mm bezel 30-245 mm, programmable full cab inner coolant supply 40 bar, 23 l / min chip conveyor
2005
75,000 €  
    request
125494833 104

GLAUCHAU SI 6/2 AS-PC x 500 for sale
Internal and Face Grinding Machine


internal diameter: 20 - 400 mmgrinding depth: 500 mmswing diameter: 500 mmstroke of the table: 800 mmcenter height over work table: 355 mmgrinding diameter - cylindrical/face: 600 mmworkpiece spindle swivable +/-: 23 °w ...
used machine
 
internal diameter: 20 - 400 mm
grinding depth: 500 mm
swing diameter: 500 mm
stroke of the table: 800 mm
center height over work table: 355 mm
grinding diameter - cylindrical/face: 600 mm
workpiece spindle swivable +/-: 23 °
work piece spindle speed: 40 - 400 U/min
table speeds: 0,1 - 8 m/min
rapid traverse of table: 10 m/min
internal grinding motor: 7,5 kW
front grinding motor: 4 kW
total power requirement: ca.15 kW
dimensions of the machine ca.: 0 m
power capacity: 17 kW
weight of the machine ca.: 6,5 t
program control, face grinding attachment, coolant device usw.

unused machine, like new


This ad was created with MODUL MWS - the software solution of LogoTech.
1988
Price  
    request
125451736 702

KEMPER Consul ET for sale
Weighing machines


Used clerk Kemper Consul ET Year of manufacture 2004 200-1200 gram Case stainless steel, plastic Automatic Bemehlung
used machine
 
Used clerk Kemper Consul ET
Year of manufacture 2004
200-1200 gram
Case stainless steel, plastic
Automatic Bemehlung
2004
Price  
    request
125494597 1300

SCM DOGMA for sale
Angular Plant/ Window Machining Center


Weight approx.: 4000 kgDimensions (l x w x h) approx.: 8500 x 3000 x 2000 mmDescription: Workpiece length 220 to 3000 mm, workpiece width 40 to 200 mm, workpiece height 40 to 140 mm, with crosscut saw engine 4 kW, saw bl ...
used machine
 
Weight approx.: 4000 kg
Dimensions (l x w x h) approx.: 8500 x 3000 x 2000 mm
Description: Workpiece length 220 to 3000 mm, workpiece width 40 to 200 mm, workpiece height 40 to 140 mm, with crosscut saw engine 4 kW, saw blade diameter max. 400 mm, tenoning spindle diameter 50 mm, clamping length max. 320 mm, mount HSK S, engine 11 kW, feed 4 to 10 m/min, 1st profiling spindle 50 x 320 mm, 7.5 kW, tool diameter 130 to 240 mm, 2nd profiling spindle identical, further processing spindle DUO, diameter 50 mm, tool diameter 154 mm, 6000 rpm, with stepless programming in 5 positions, workpiece return unit
2010
used machinery auction RESALE 18,000 €  
  FR   request
125436764 108

ECKERT JANTAR 2 for sale
Plasma cutter


Plasma cutter ECKERT JANTAR 2 was built in 2008. Basic technical data of ECKERT JANTAR 2: - cutting width at 2 burner supports: 2000 mm - working length: 6000 mm - length of the road: 5000 mm - crossing speed: 0-2 ...
used machine
 
Plasma cutter ECKERT JANTAR 2 was built in 2008.

Basic technical data of ECKERT JANTAR 2:
- cutting width at 2 burner supports: 2000 mm
- working length: 6000 mm
- length of the road: 5000 mm
- crossing speed: 0-20000 mm / min.
- cutting thickness (with one HARRIS burner): 100 mm
- type of combustible gas: propane, acetylene, APACHI, natural gas
- programming format: ESSI
- positioning accuracy of the controller: 0.05 mm
- supply voltage: 50 Hz / 230V / + - 5%

The basic equipment of the JANTAR-2 burner consists of:
- ECS 859 CNC computer control system: 1 item
- cutting nozzles for the HARRIS burner: 3 pcs. / burner
- central gas distributor: 1 item
- a portal beam with guides for gas hoses and electric wires placed on it: 1 set.
- longitudinal roadway made of railway rails (2000 mm working cut): 1 set.
- longitudinal driving unit (two-sided): 1 set
- transverse drive unit: 1 set
2008
20,000 €  
  PL   request
125494603 206

ITALPRESSE NUOVO PROGRAM for sale
Hydraulic Frame Press


Weight approx.: 1500 kgDimensions (l x w x h) approx.: 3700 x 1100 x 2300 mmDescription: Pressing surface approx. 2800 x 1400 mm, upper pressure beam and lateral press jaws hydraulically movable, with hydraulic unit
used machine
 
Weight approx.: 1500 kg
Dimensions (l x w x h) approx.: 3700 x 1100 x 2300 mm
Description: Pressing surface approx. 2800 x 1400 mm, upper pressure beam and lateral press jaws hydraulically movable, with hydraulic unit
2004
used machinery auction RESALE 400 €  
  FR   request
125436745 102

MATRA FUL 510x1000 for sale
CNC Turning Machines


CNC lathe MATRA FUL 510x1000 was manufactured in 2000. Characteristics of the MATRA FUL 510x1000 CNC lathe: - CNC control in Polish and German: Fagor 8055TC (the machine can be programmed with codes or completed fie ...
used machine
 
CNC lathe MATRA FUL 510x1000 was manufactured in 2000.

Characteristics of the MATRA FUL 510x1000 CNC lathe:
- CNC control in Polish and German: Fagor 8055TC (the machine can be programmed with codes or completed fields in markers)
- the machine reads dxf drawings
- turning length: 1000 mm
- turning diameter: 510 mm
- spindle speed: 5-2000 revolutions
- turning lathe: fi 250
- hydraulic head: 8 items VDi30
- pull-out bridge: allows you to increase the machining diameter of the workpiece
- tailstock cone: Morsea 5
- installed power: 13 KVA
- lathe dimensions (length x width x height): 2500 x 1800 x 1900 mm
- machine weight: 2.5 tons
- equipment: a range of high-quality ISCAR turning knives
2000
17,000 €  
  PL   request
125489920 702

W & P Wickelmaschinen - Hörnchen for sale
automatic dough dividing + moulding machine, fabr.


computer-controlled, 24 diff. programs, 2 speeds, laminating, dividing and moulding combined in one machine,\r\ndougweight range 65 - 800 gr., cap. 750 - 6300 p./h\r\nproducing of soft- and hard dough, f.e. ciabatta, bag ...

 
computer-controlled, 24 diff. programs, 2 speeds, laminating, dividing and moulding combined in one machine,\r\ndougweight range 65 - 800 gr., cap. 750 - 6300 p./h\r\nproducing of soft- and hard dough, f.e. ciabatta, baguette\r\naccessories: 2 four cylinder-moulders\r\nincl. extender to mould extra-long
 
Price  
    request
125436663 105

RSA Rasacut 3000 - Rohre - Profile for sale
Sawing Centres


RSA saw Centre for tubes and profiles mod. Rasacut 3000 / year 2001 / incl. Entgratungautomat RASAPLAN XY with collar bearings 6200 mm / 3000 kg nominal load / continuously variable motor with 5, 5kW / speed of 30-250 mi ...
used machine
 
RSA saw Centre for tubes and profiles mod. Rasacut 3000 / year 2001 / incl. Entgratungautomat RASAPLAN XY with collar bearings 6200 mm / 3000 kg nominal load / continuously variable motor with 5, 5kW / speed of 30-250 min-1 / Jet cooling with coolant recirculation / spray mist cooling / MI Kro-spray & dispensing system with electrical level indicator Aircolder / rest - &amp; caps cut containers / universal clamping JAWS / short lengths program / aspirator RSA 125-40 / unloading-loading magazine RASAPORT AS / good condition
Fe.gi.Maschinen.SBG.at

RSA sawing center for pipes and profiles mod. Rasacut 3000 / year 2001 / incl. deburring machine RASAPLAN XY with flange bearing 6200 mm / rated load 3000 kg / y variable motor with 5.5kW / speed of 30-250 min-1 / jet cooling with coolant return / spray cooling / micro - spray & dosing system with electrical level indicator Aircolder / rest &amp; Dembo-cut container / universal clamping jaws / short-length program / extraction system RSA 125-40 / unloading magazines RASAPORT AS / good condition
Fe.gi.Maschinen.SBG.at
2001
Price  
    request
125475410 102

VOEST DA 210/1 for sale
Center Lathe


turning diameter over bed: 430 mmturning diameter over slide rest: 245 mmturning length: 1000 mmcentre height: 210 mmturning speeds: 44 - 2000 U/minspindle taper: 55027 Gr. 6 spindle bore: 52 mmtaper bore: metr. 57 tails ...
used machine
 
turning diameter over bed: 430 mm
turning diameter over slide rest: 245 mm
turning length: 1000 mm
centre height: 210 mm
turning speeds: 44 - 2000 U/min
spindle taper: 55027 Gr. 6
spindle bore: 52 mm
taper bore: metr. 57
tailstock quill taper MT: Mk 4
power capacity: 5,5 kW
weight: 1,3 t
Mechanic: good:
Optical condition: good:
The machine can be viewed under current.:
0722801
380 V, 50 Hz Color: green

Equipment:
Engine brake
2 emergency stop switch
3 axis Mitutoyo digital display Linear Scala PLL 13 L
3 jaws - wedge bar 200 mm
Drill chuck with insert pin
Center point firmly
dto, running
Multifix holder B
3 inserts
Coolant device
Drum stop
Chip tray
Shaving back wall
Rotary test on 200 mm flying 0,015 mm
Operating instructions, spare parts list, circuit diagrams
Machine is workshop tested and with electrical acceptance record
usgeliefert!

! Upon request, machine with electrically locked chip protection
to be delivered at extra cost!
! Machine can be adapted to the new machine guidelines!



This ad was created with MODUL MWS - the software solution of LogoTech.
1990
Price  
    request
125421676 109

BAOMA DK 7732 for sale
Die-Sinking Spark Erosion Machine Tools


An EDM machine wire BAOMA DK7732 built in 2006 year. The machine has a CNC that allow programming in 4 axes (X, Y, and U, V) which allows you to cut advanced shapes. Technical parameters of EDM BAOMA DK7732 E: - wor ...
used machine
 
An EDM machine wire BAOMA DK7732 built in 2006 year. The machine has a CNC that allow programming in 4 axes (X, Y, and U, V) which allows you to cut advanced shapes.

Technical parameters of EDM BAOMA DK7732 E:
- working table displacement: 320 x 400 mm
- maximum cutting height: 500 mm
- maximum angle of the cone: 60 degrees / 100 mm
- wire electrode diameter: 0.14-0.22 mm
- maximum efficiency: 100 mm / min.
- the smallest interplacement stroke: 0.001 mm
- reversing clearance of the working table screw: 0.002 mm
- positioning accuracy: 0.03 mm on a length of 500 mm
- maximum weight of the detail: 600 kg
- power consumption: 2 KVA
- external dimensions of the machine: 1340 x 1870 x 1670 mm
- machine weight: 1800 kg
- power supply: 3 x 380V 50 HZ
2006
12,375 €  
  PL   request
125475108 102

WMW NILES N8/6300 for sale
Center Lathe


turning diameter over bed: 1100 mm turning diameter over support: 650 mm Turning length: 6500 mm center height measured in bed: 450 mm faceplate diameter: 1000 mm spindle speed:: 4,6 - 545 / 22 step U/min spindle bore:  ...

 
turning diameter over bed: 1100 mm
turning diameter over support: 650 mm
Turning length: 6500 mm
center height measured in bed: 450 mm
faceplate diameter: 1000 mm
spindle speed:: 4,6 - 545 / 22 step U/min
spindle bore: Ø 90 mm
feed range: längs: 0,018 - 0,225 mm/U
feed range: quer: 0,006 - 0,094 mm/U
tailstock taper MT: MK5
tailstock quill stroke: 410 mm
total power requirement: 22,0 kW
weight of the machine ca.: 12,0 t
dimension machine [...]: 9,4 x 2,1 x 1,7 m
dimensions electric cabinet: L:0,7 x B: 0,45 x H: 1,08 m
Machine will be modernized by company WMW AG.

equipment:
- copying device for cone turning
- chuck protection

accessories:

- 4 pcs steady rests (closed)
- 1 pc steady rest Ø 220mm (open) revolving
- 1 pc three jaw chuck Ø 480mm
- 1 pc roller support for support of max. 600mm
- diverse base stands
- diverse tools
[...]

Work performed:
- cleaning of the entire machine ( chips has been removed, freed from oil, engreasing, preparation of re-painting)
- mechanical checked and defect parts has been replaced and adjusted
- chuck protection including electrical clamping retofitted
- complete new painting ( old painting has been removed via filling, sanding, priming, sanding, painting
- preparation of the required documentation ( electric wiring diagram, operator manual)

Planned work:
- Renewal of machine wiring (new routed wiring installed and assembling, energy chains upgraded
- Renewal of electric cabinet ( clamp, contactor and wiring renewed,
- Renewal of the control panel with the spindle
- standstill monitoring will be retrofitted
- Retrofitting of emergency stop switch (emergency stop button on spindle + support)
- Retrofitting of travel path measuring device (DRO) (display, magnetic measuring tape)
- Retrofit of machine ilumination

 
Price  
    request
125421674 107

GÖTENEDS FUTURA 20 3X2100 for sale
CNC Bending Machines


The Göteneds FUTURA 20 3X2100 CNC bending machine was manufactured in 2007. The machine has full CNC control, which, along with a digitally controlled bumper, allows you to perform advanced bends such as shapes such as  ...
used machine
 
The Göteneds FUTURA 20 3X2100 CNC bending machine was manufactured in 2007. The machine has full CNC control, which, along with a digitally controlled bumper, allows you to perform advanced bends such as shapes such as gutter. The upper beam of the machine is rotatable and can be equipped with two types of tools. The bending machine is equipped with a touch LCD panel enabling easy programming and control of the machine's operation.

Currently, Göteneds is connected to Du?sa by CIDAN and belongs to Petersen Machinery Group.

Characteristic parameters:
- bending length: 2100 mm

Maximum bending thickness:
- ordinary steel: 3 mm
- stainless steel: 2 mm
- aluminum: 4.5 mm
- power of the pressure beam engine: 2.2 kW
- bending beam motor power: 2.2 kW
- weight (with Combi beam): 3450 kg

Standard equipment for the Göteneds CIDAN FUTURA 20 3X2100 CNC machine:
- COMBI swivel beam with automatic locking, 300 bar and quick-change tool system, 125 mm high
- driven rear bumper type AMF-1550
- CNC control with graphics and touch screen type CS-301
- CNC controlled gap between the bending beam and the lower beam
- lower beam strip
- bending speed adjustment through the inverter
- manual compensation of deflection in the bending beam
2007
30,000 €  
  PL   request
125460772 210

SCM Method K for sale
Window production centre


Tenoning spindle: 1 St.Number of milling agregates: 5 St.Spindle diameter: 50 mm In order to sell still in useSCM METHOD K Machining center for windows and doorsTechnical specificationsMax. Working length: 2800 mm(using ...

 
Tenoning spindle: 1 St.
Number of milling agregates: 5 St.
Spindle diameter: 50 mm
In order to sell still in use

SCM METHOD K Machining center for windows and doors

Technical specifications
Max. Working length: 2800 mm
(using the stops)
minute Workpiece length: 200 mm
(clear pin dimension)
minute Workpiece height: 30 mm
Max. Workpiece height: 140 mm
Tenoning speed: 4/16 m / min
Feed rate: 3-15 m / min

Crosscut saw 4 kW with motor horizontal positioning over free
programmable axis control
Speed 3000 rpm
Saw blade diameter 400 mm, bore 80 mm
Extraction nozzle diameter 120 mm
automatic engine brake

Slotted spindle 7.5 kW with

Spindle diameter 50 mm
Spindle clamping length 620 mm
Spindle stroke under table 575 mm
Speed 3500 rpm
Max. Tool diameter 320 mm
upper bearings
Motorized vertical positioning via freely programmable axis control
automatic counter-timber beam
automatic engine brake
automatic star delta connection
Suction nozzle diameter 2 x 160 mm

1st profile spindle 5.5 kW clockwise and counterclockwise
(Synchronization) with
Spindle diameter 50 mm
Spindle clamping length 320 mm
Spindle stroke under table 265 mm
Horizontal adjustment 60 mm
Spindle speed 6500 rpm.
Tool diameter min./max. 100/220 mm
Motorized vertical positioning via freely programmable axis control
automatic engine brake
Extraction nozzle diameter 150 mm

2. Profile spindle 5.5 kW clockwise with
Spindle diameter 50 mm
Spindle clamping length 320 mm
Spindle stroke under table 265 mm
Horizontal adjustment 60 mm
Spindle speed 6500 rpm.
Tool diameter min./max. 100/220 mm
Motorized vertical positioning via freely programmable axis control
Extraction nozzle diameter 150 mm
automatic engine brake

Gear milling unit 5.5 kW with
Spindle diameter 50 mm
Spindle clamping length 160 mm
Spindle stroke 100 mm
Horizontal adjustment 60 mm
Speed 6500 rpm.
Tool diameter min./max. 100/200 mm
pneumatic single stroke programmable via control
Timed horizontal feed-in for insert milling for the execution of
non-continuous grooves via CNC control
Extraction nozzle diameter 150 mm
automatic engine brake

Glass saw 2,2 kW with
Saw shaft diameter 25 mm
Saw blade diameter max. 220 mm
Saw shaft clamping length max. 22 mm
Speed 5000 rpm.
Extraction nozzle diameter 50 mm
automatic engine brake

Motorized, height-adjustable roller feed with
closest roll spacing
Motor power 1.1 kW

complete with
-CE Compliance
- Crosscut saw, tenon cutting and slot part horizontally infinitely programmable
- Slot part 620 mm spindle length, anti-clockwise
- Programmable vertical movement via ball screws
- motor-driven tapping table movement
- automatically trailing splitter wood for all slot tool positions
- Workpiece clamping for single / double wood operation with
automatic pressure drop protection
- precise swiveling tap table +/- 0 - 60 °
- Extendable telescopic length stop with automatic
Differential control, working length 2800 mm
- Programmable vertical movement via ball screw
in position 2, 3 and 4
- Horizontal positioning on manually programmable
4-fold revolver to operate from the front of the machine
for positions 3, 4 and 5
- Continuous roller feed, swiveling for light
Tool change, with additional feed roller for
Milling and motorized height adjustment according to scale
- Glass bead saw with pneumatic vertical positioning on manual
adjustable 4-fold revolver,
Forced guidance of the glass retaining strip with non-return valve, use of the
Glass bead saw automatically controlled via cycle
- automatic synchronization - immersion function of the first
Profile spindle for tear-free milling of sash frames,
Horizontal positioning on manually programmable
4-speed turret to be operated from the front of the machine
- extendable support rail for large format sash frames
- Gear milling unit with pneumatic horizontal positioning,
Use of the glass bead cutting saw via automatic cycle of the
machine program
Vertical positioning on manually programmable 4-fold turret
- CNC machine control via programmable logic controllers
electronics (PLC) type CONTROL 20
- Motor protection switches for all motors
- Operating tools, operating instructions
- Weight 3600 Kg

special accessories

Motor amplification 11 kW in Pos. 2, 3, 4

(Technical information according to the manufacturer - without guarantee!)



This ad was created with MODUL MWS - the software solution of LogoTech.
 
3,000 €  
    request
 page 1  >
You didn't find your wanted machine?   to all dealers(no registration necessary)
More GRAM models (2 or more machines):
sell machinery
Sell your machinery
to the price starting with only € 0.09 monthly per machine!
machinery sold

Sold machinery

horizontal boxer press Euromac Digibend 360


EUROMAC punching Digibend 360 capacity 36 tonnes lengh of stroke 250 mm working speed 10/24-6 mm/sec hight bending 200 mm extra high bending 415 mm oil tank capacity 60 lt aprox 3-phases motor 5.5-4 (hp-kw) table 580 x 1170 mm size 680 x 1170 x 1130 mm weight 900 kg year 2000 CE The data are mechanically translated in the english language. Translation errors are possible. No guarantee for printed date and pricing. • Save up to 100 bend in machine memory. • Bend the guaranteed accurate to +/-0.05mm. • Automated for fast, precise production. • Reduce your set up time. • Adjusting the machine bending pressure or working speed. • Monoblock construction. • Maximum flexibility for bending application (up to 10 tooling) Benefits: • With Euromac punching bending machine, you can change over from one type of tooling to another quickly and easily. • Our bending table is machined from one piece tapered roller steel casting that's guaranteed for 5 year. • Our horizontal acting bending machines give you unlimited bending capabilities, without the risk of damaging your expensive press brake tooling. • Euromac punching bending machine are easy to program, easy to operate, and the cost of production is surprisingly low Well in good conditions of use, which ' can be seen connected and running, by appointment. Specification The RAM force-tonnage (KN) 36 (160) Length of stroke 250 mm Table dimension 1200x580mm Overall dimensions (W x D x H) 1250 x 650 x mm-1140 mm Weight 900 kg

Plasma cutter ECKERT JANTAR 2


Plasma cutter ECKERT JANTAR 2 was built in 2008. The basic technical data cutting ECKERT JANTAR 2:-working width with 2 suportach burners: 2000 mm -cutting length: 6000 mm -the length of the road: 5000 mm -passage speed: 0-20000 mm/min. -cutting thickness (with one burner HARRIS): 100 mm -the type of flammable gas: propane, acetylene, APACHI, natural gas -format programming: ESSI -positioning accuracy: 0.05 mm -supply voltage: 50 Hz/230V/+-5% Part of the basic equipment cutting device JANTAR-2 includes: -computer control system CNC ECS 859:1 PCs. -torch cutting nozzles HARRIS: set of 3/palnik -Central gas Splitter: 1 PCs. -beam portal with guides on the gas hoses and electric cables: 1 set. -the longitudinal rails made of roadway (2000 mm cutting workspace): 1 set. -drive unit wzd?u?my (double-sided): 1 set. -drive unit: 1 set.

CNC Turning Machines MATRA FUL 510x1000


CNC lathe MATRA FUL 510x1000 was produced in 2000. CNC lathe-specific data MATRA FUL 510x1000: -CNC control in Polish and German: Fagor 8055TC (the machine you can program the g code or supplement the ready field in marker overlays) machine reads dxf drawings -Turning length: 1000 mm -turning diameter: 510 mm -spindle speed: 5-2000 RPM -Chuck: fi 250 hydraulic head: 8 items VDi30 -extracted Bridge: increases the diameter of component manufacturing -taper tailstock: Morsea 5 -installed power: 13 KVA -size Lathes (l x w x h): 2500 x 1800 x 1900 mm -machine weight: 2.5 tons of equipment: a variety of high-quality knives for turning the company ISCAR

Die-Sinking Spark Erosion Machine Tools BAOMA DK 7732


An EDM machine wire BAOMA DK7732 built in 2006 year. The machine has a CNC that allow programming in 4 axes (X, Y, and U, V) which allows you to cut advanced shapes. Technical parameters of EDM BAOMA DK7732 E: -working table range: 320 x 400 mm -maximum cutting height: 500 mm -the maximum taper angle: 60 degrees/100 mm -the diameter of the electrode a: 0.14 – 0.22 mm -maximum capacity: 100 mm/min. -the smallest jump interplolacji: 0.001 mm -luz reversible screws of working table: 0.002 mm -positioning accuracy: 0.03 mm over a length of 500 mm -maximum weight of workpiece: 600 kg -power consumption: 2 KVA -external dimensions: 1340 x 1870 x 1670 mm -machine weight: 1800 kg -power supply: 3 x 380V 50 HZ

CNC Bending Machines Göteneds FUTURA 20 3X2100


CNC bending machine Göteneds FUTURA 20 3X2100 the Swedish production, was produced in 2007. The machine has a full CNC control, which, along with digitally controlled bumper allows you to perform advanced near-perfect for example. such shapes as the gutter. Upper beam is rotating and can be fitted with two types of tools. Bending machine is equipped with a touch-screen LCD for easy programming and control of the machine. Today the company Göteneds is connected with the Du?s? company CIDAN and belongs to the Petersen Machinery Group. Characteristics: -bending length: 2100 mm The maximum thickness of bending: -steel standard: 3 mm -stainless steel: 2 mm -aluminum: 4.5 mm -motor power beam pressure: 2.2 kW -motor power beam solenoids: 2.2 kW -weight (with beam Combi): 3450 kg Standard equipment of the CNC machine Göteneds CIDAN FUTURA 20 3X2100: -rotating beam type COMBI with auto-lock, trim 300 and quick change tool system shared with a height of 125 mm -driven rear bumper type AMF-1550 -CNC control with graphics and touch screen type CS-301 -CNC controlled slot between the beam and the lower gn?c? -trim the lower beams -adjust the bending speed by inverter -Manual beam deflection compensation solenoids

TEKNA TK419/4


3-axis CNC vertical machining center featured with a clamping system made up of vacuum tables that allow panels and plates to be held by vacuum; this solution is useful to obtain an extremely efficient machining of thin components that could hardly be fixed by means of a traditional clamping system. The machining center is equipped with a series of valves that turn on/off different areas of the machining table, thus concentrating the suction on one area and optimizing the clamping of components with limited dimensions. It is designed for drilling and interpolated milling operations on composite panels, panels and plates in aluminum and steel. To create programs that control the machines, Tekna provides user-friendly software tools that can be used both by professional CNC programmers, who can implement the most complex solutions, and by completely inexperienced users; after a few training hours the customer will be able to operate the machining center using a graphical programming. Software solutions offered by Tekna result from an accurate design and from the actual customer needs analysis. The simplicity of usage of these solutions reduces the management time and costs.

Elumatec DG104, E555


Double mitre saw DG 104 Description The optimal double mitre saw for series production as well as for special applications The universal pivoting and tilting of both saw units allows cutting of high and wide profiles as well as every type of compound mitre. Consequently, many profiles can be cut without support blocks External-dimension cuts possible for all cutting variants. Consequently, no complicated length calculations are necessary. This is a big advantage when cutting special angles Pivoting range with digital angle display Safety hoods Equipped with saw blades as standard Equipped with digital display E 111 as standard Pulsed coolant system Technical specifications Minimum cutting length at 90° 350 mm Minimum cutting length tilted at 45° 350 mm Pivoting range inwards 90° - 45° (up to 22.5° manual with digital display) Tilting range inwards pneumatically 90° - 45° For cutting range, see cutting diagram Saw blade diameter 420 mm Saw blade speed 2,800 rpm Power supply 230/400 V, 3~, 50 Hz Power output per motor 4 kW Compressed air supply 7 bar Air consumption per working cycle 40 l without spraying, 64 l with spraying Cutting length 6,000 mm Options DG 104 M machine bed made of steel sheet (cutting length 4,500 mm, 6,000 mm) Software for E 555: Software module for chop and oversize length cuts MACHINE IS WELL MAINTAINED AND WORKING WITHOUT ANY PROBLEM. PERFECT CONDITION. MACHINE HAS INCLUDED E555 INDUSTRIAL PC.

Double Miter Saws Abcd Machinery 2015


SELECTA 3 - Double head cutting off machine Home / ABCD Machinery – Machines for processing Aluminum Steel and PVC / SELECTA 3 – Double head cutting off machine SELECTA 3 High quality double head cutting off machine with a fixed sawing head on the left and automatic right head movable by numeric control with upstroke blades. Rotation and tilting of both blades for compound cuts. Brushless motor for the positioning of the movable head. Automatic pivoting inwards/outwards heads by brushless motor 22,5°90°-140°. Automatic tilting range inwards of the saw blades 90°-45°, with 2 TCT Saw blades Ø600mm. Motor power 3Kw each, lubrication by micro drop with pure oil, full protections, cutting areas with automatic raising/closing safety head, kit vertical pneumatic clamps, software of the machine completely graphical-colour display Touch screen video. 17’’Wide extension thanks to the gates RJ45-USB it allows the possibility to manage different typologies of windows with image memory for direct use. Ethernet connection to the main office or with other programs or connections with other CNC machines. Possibility of tele-assistance via . CUTTING LENGTH 6 MT. STANDARD EQUIPMENT Unlimited memorizing of cutting lists via keyboard, USB key Management expanding capacity of cut on length Management reducing capacity of cut on length Auto-feed and cut off saw (point to point) Movable roller table support with vertical stop 4x vertical pneumatic clamps Electric device for connecting motorized belt conveyor Electric device for connecting industrial vacuum Lubrication by micro drop with pure oil Full protections cutting area 2x TCT Saw Blades Ø600mm MACHINE JUST USED 3 MONTHS. PERFECT CONDITION. 5*AXIS CONTROLLED.

Elumatec 2011


Profile machining centre SBZ 140 Description 4-axis profile machining centre Designed for economical and efficient machining of aluminium and thin-walled steel profiles All operations, such as routing, drilling and tapping are performed while the profile bar is stationary to protect the profile surfaces Machining with all tools at angles continuously adjustable from 0° - 180° The on-board tool magazine ensures that tool changing times are kept short, thereby optimising machining cycles The magazine can be equipped with eight tools A rotating angle head with two different tools is available for double-bar and end machining (0°?-?90°?-?180°?-?270°) (option) Two separate working zones enable machining in shuttle operation (option) 4-axis controller 15" colour display, USB ports and network connection Windows operating system Technical specifications Traverse path X-axis, 4,200 mm, 6,400 mm, 7,600 mm, 9,700 mm (additional lengths on request) Vmax. 65 m/min. Traverse path Y-axis, 850 mm, Vmax. 60 m/min. Traverse path Z-axis, 650 mm, Vmax. 60 m/min. Pivoting angle A-axis, 0° - 180°; freely programmable in 1/10° steps Max. spindle speed 24,000 rpm Spindle power output 11 kW, S1 Tool changer for eight tools, additional tool positions on request Compressed air supply 7 bar Power supply 400 V, 3~, 50 Hz, 63 A Air consumption per minute 180 l with spraying Machining length SBZ 140 - 9.7 m Max. machining length with profile end machining, 9,580 mm Max. machining length without profile end machining, 9,700 mm MACHINE IS PERFECT CONDITION. SET UP TIME IS END OF 2012. NOT USED SO MUCH AND FULL FUNTIONALITY.

Book cover manufacturing machines Muller Martini 1509


Automatic saddle stitcher model 1509, Year 1996 - Three double feeders model 1516 L 5 max paper size 380x305 mms. - Min paper size 145x100 mms., Max speed 7.500 copies/hour - Two stitching heads, Air pump Rietschle 100 m3 - Three knife trimmer model 890/217 with many spare knives, copy counter, short delivery - All manuals and electric diagrams, many spare parts and accessories - Without damages, immediately available in stock, all photos attached

Profiling Systems INTESO S3130T


Perforating machine INTESO S3130T was produced in 2011 year in the Czech Republic. Technical data machine profiles INTESO S 3130 T: -control panel screen: SIEMENS -maximum length: 3000 mm -the maximum cross section profiles dziurowanych: 120 x 80 mm; fi 80 mm -feed automatic linear drive -optical sensor for automatic control of the correct length of workpiece -linear positioning stroke hydraulic cylinder -bezdeformacyjna perforation technology -the possibility of perforation of the profiles of various shapes -program memory perf -perforation, double-sided (in a single operation) and one-sided-automatic lubrication Tool equipment top INTESO S3130 T: -perforated profiles: 40 x 27 x 2; 30 x 30 x 2.0 -punches and dies: 18 mm; 18 x 18 upper matrix, matrix Perforating line INTESO S3130T CE certification.

Welding Machines KT7 KTP 300-150


Plasma cutter KT7 KTP 300-150 manufactured in 2016. The set includes: plasma source, plotter and screw compressor. Technical Data: -field work: 150 x 300 cm -precision stepper motor-based drives (servo motor) -the structure of the gate running, Y axis -double sided operator coupled mechanically -the application of very rigid and stable frame structure -Y axis: 4.7 NM ratio -X axis: 3.2 NM -Z axis: 3.2 NM -working speed for G0:16000 mm/min. (40000 mm/min-with servo motors) -water table which gives a cleaner cut, cooling and reducing emissions of gases during machining -corrosion protection design of hot galvanizing and specialised polyurethane paints -metal detection -protection system corruption of a burner -torch height control over the sheet of THC -handle antykolizyjny burner -precision ustawoanie punching sheet metal (longer life supplies the burner) -modern desktop operator with 19 "screen and the computer -external USB port that allows you to open files using the pen-drive -high precision cutting does not require further complex machining -software based on Linux-much greater stability than Windows -the total weight of the machine: ok. 800 kg CAM Software: -burning outside the useful edge -external, internal offsets -import files in DXF format -selection of parameters of smoking -software in Polish language SheetCam program to generate common shapes and simple distribution of parts on the sheet Screw compressor-technical data: -power: 5.5 kW -pressure: 8 bar -capacity: 0.85 m3/min. -capacity: 51 m3/h -weight: 340 kg -tank: 500 L -dimensions (l x w x h): 2030 x 650 x 1500 mm

Multideck ovens Real Forni Rotoreal SP Medio


Descriere Marca Real Forni Model SP Medio R ID 7170a Status Activ Pret 7.200 € + TVA An fabricatie 2014 Putere 3 KW Ore de functionare 700 ore Locatie Nova Gorica (SI) Cuptor rotativ patiserie Real Forni Rotoreal, SP Medio R din 2014 pe gaz cu rotor de 3 Kw (Alimentare: 400V, 50Hz). Cat. II2 E3 B/P, gaz (mbar) G20=20, G30/31=30. Arz?tor Riello (putere caloric? 62 000 Kcal/h), greutate aprox. 1500 kg. C?rucior pentru 25 de t?vi (60 x 80) inclus. Panou de control electronic cu 100 de programe ?i 5 viteze de coacere. 2 buc??i disponibile. ExWorks. Pre?ul este negociabil ?i nu include TVA. Contact Tel.: +40-359/175.575 Fax: +40-259/426.248 Mobil: +40-743/177.040 ; +40-740/221.698 Vizionarea produsului se programeaza cu 24 de ore inainte. We speak English. Wir sprechen Deutsch. (+40-740/221.698 ) Hablamos Español. Beszélünk magyarul. (+40-743/177.040 ) Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervam dreptul la greseli, modificari si vanzare prealabila.

CNC Bending Presses LVD PPBL 200/30


Press brake LVD PPBL 200/30 manufactured in 2000. The machine allows you to fold items on length 3100 mm with the force 200 tons. Control and control cabinet have been completely upgraded in November 2017 (on work carried a guarantee). Early upgrades carried out the company HARTMANN from Germany. Technical data of the press LVD PPBL 200/30: -pressure capacity: 200 tons -bending length: 3100 mm -distance: 160 mm -maximum pressure: 300 bar -power: 11 kW -machine weight: 11200 kg -menu machine and manual work: in Polish language -a complete wiring diagram

Four-sided planing machines SCM SUPERSET XL


Moulding machine Scm Superset XL 5 shafts: Bottom kW 4 Right kW 5,5 Left kW 5,5 Upper kW 7,5 Bottom kW 4 Max width of work (finished sect.) 240 mm Min width of work (finished sect.) 25 mm Max height of work (finished sect.) 120 mm Min height of work (finished sect.) 6 mm Min length single piece 620 mm Diameter spindles 40 mm Useful length horizontal spindles 250 mm Useful length vertical spindles 140 mm Length entrance worktop 2500 mm Electronic programmer SPV232: n.99 programs of thickness and width positionning Automatic lubrication of the worktop

Butter packing machines BENHIL MILTIPACK 8345


BENHIL MULTIPACK 8345 BUTTER WRAPPING PACKING MACHINE 500 GRAM PORTIONS MARGARINE OR BUTTER YEAR 1992

Laser Cutting Machines MAZAK SUPER TURBO-X 48 HI-PRO


MAZAK laser SUPER TURBO-X 48 Hi-PRO was produced in 1999 year by the renowned Japanese brand YAMAZAKI MAZAK CORPORATION. Technical data: -CNC: MAZAK L32 -power: 2 kW -table size: 2500 x 1250 mm -maximum cutting thickness, black steel: 16 mm -maximum cutting thickness, stainless steel: 5 mm -maximum cutting thickness, aluminium: 4 mm -stroke X axis: 2630 (103.5) mm (in.) -stroke Y axis: 1270 (50.0) mm (in.) -stroke Z axis: 100 (3.9) mm (in.) -3-phase voltage: 230 ~ 460 V -current protection: 3x100 A, 47 kW -weight: 10.4 T -external dimensions: laser L 5800 mm x (H) 2100 mm x S2730 mm-3 Cabinet dimensions: H 2000 mm x 1400 x 800 mm, H 2000 mm x 600 x 70 mm, 1300 mm x 700 x 700 mm Additional information about machine MAZAK SUPER TURBO-X 48 Hi-PRO: -the number of man hours on/cutting: 37180 h incorporation, 27000 h-external program to the laser beam: SICAM -consumption and type of gases: oxygen to steel, nitrogen-stainless steel, aluminum, bronze, copper, gas laser -condition: good, after services, these mirrors, oils

FINN POWER F6 25 SB


FINN POWER F6 25 SB punching machine (1998):  In excellent working condition Working hours: Machine On: 56.668 Punching force: 300 kN Max. working pressure: 300 BAR Punching Stroke: Hydraulic Control: Siemens Stroke depth adjustment: Numerically adjustable  Stroke length adjustment: Programmable Ram speed adjustment: Programmable Number of turret stations: 20 Max. Punch diameter: 89 mm Max. material thickness: 8 mm. Maximum blank weight: 200 kgs. Work area w/o repositioning: 1500 x 2500 mm. Work area with repositioning: 1500 x 5000 mm. X-axis travel: 2500 mm. Y-axis travel: 1500 mm. Max. liner travel speed X-axis: 3460 IPM Max. diagonal travel speed: 4500 IPM Minimum programmable increment: 1/10000 Accuracy according VDI/DGQ 3441 Positional Deviation (Pa): +/-.05 mm. Positional scatter (Ps): +/-.025mm. Hit rates max: Mibbling: 800 HPM 1" Increments: 450 HPM Torret confirguration: 20 stations: - Stations D 2x index - Stations B 10x - Stations C 6x (2x index) 2 Multitool divided as following: 1 X MT 24/8 1X MT 10 / 16

Komori L 420


-Four colours STRAIGHT machine max size 37x52 cms. -Year 2008, Only 17 mil. impressions -Komorimatic continuous alcohol dampening with refrigerated recirculation system with alcohol metering -Komori Plate Changer: Semi-automatic plate changing -Densitometer PDC-lite: Scanning density control system -PQC control system- Control panel with touch screen built on delivery: ink zones, all registers and dampening remote controls, cocking -All automatic washers, Double size diameter of impression and transfer cylinders -All chromed cylinders: plate, blanket and impression -Powder sprayer, Max speed 13.000 sh/hour -Stream feeder with low pile delivery -Envelope feeder -All manuals, electric diagrams, tools and accessories

Paper cutting machines POLAR 137 EMC Monitor Autotrim


Autotrim Air table 2 side tables 2 knives Photo cells Program Machine complete, in good working conditions.

Paper cutting machines POLAR 92E


Air table 2 side tables 2 knives Photo cells Program

Index cutting machine HUNKELER RE-MAT 320 OC


Automatic program Safety guard 1 standard L knife length 320 mm Option : finger cut equipment

Jackstone


Jacckstene vertical plate freezers.Details:Brand: Jackstone;Number of stations: 20 ;Number of blocks: 40Block size: 530 x 100 x 520 mm (L x W x H);Freezer dimensions: 3450 x 1600 x 1880 mm (L x W x H);Used refubrished in very good condition. Czamara company has more refrigeration Equipment in stock. If your firm is inerested in buying refrigeration machines check our website: sklep.czamara.net.pl and contact us. In stock we have branded equipment e.g. Bitzer, Copeland, Carrier, Gram, Gea, Lu-ve, Dorin, Güntner.

Compressors Bitzer 6H-25.2Y


Semi-hermetic reciprocating compressors Bitzer 6H-25.2Y. Capacity: 110m3/h Price: on request Used refubrished in very good condition. Czamara company has more refrigeration Equipment in stock. If your firm is inerested in buying refrigeration machines check our website: sklep.czamara.net.pl and contact us. In stock we have branded equipment e.g. Bitzer, Copeland, Carrier, Gram, Gea, Lu-ve, Dorin, Güntner.

Beer Brew Line Steinecker 250 hl / Brew Steinecker, 8.5 brews/day high quality lager, up to 17°P


Beer brew line Steinecker 250 hl / brew This beer brew line was built originally by Anton Steinecker in year 1984 but is has been upgraded several times. Currently it can brew 8.5 brews / day, brew size 250 hl / brew, grist throw 5500 kg / brew and worth gravity up to 17 ° Plato. This brewery produced tree different type of high quality lager beers only. Last brew was made in December 2017 so everything is in good working order. This equipment forms a complete brewery (brew line) from malt mill to wort cooler with water island, CIP unit, buffer tank and Steinecker made Botec control system with Siemens Simatic S7-400 PLC up to the wort boiling. Main data Built by Steinecker in 1984 and upgraded later Brew size 250 hl, capacity 8.5 brews / day High quality lager beers, worth gravity up to 17 ° Plato Control system BOTEC control system with Simatic S7-400 PLC and InTouch program

Chiller Cooling Stations YORK - GRAM York - Gram, 2 units cooling capacity 354 kW


YORK 708 kW Chiller Cooling Stations Liguid cooling compressor package which includes two idential units of York cooling compressors with all auxilliaries, electrical and control cabinets. This station was stopped in full operational condition in begining of year 2018 Both units include the following main equipment • Cooling compressor York HC 8125A with cooling capacity 354 kW • Plate Heat Excanger / Evaporator type M10 • Liquid separator GHEA • Oil separator Sabroe Techncial specifications of main equipment Cooling compressors Manufacturer: YORK – GRAM Compressor type 2 units of HC8125A Year 1999 Operating hours Approx 52000 / unit Refrigerant type R717 (NH3) Refrigerant capacity 30 kg / unit Number of units 2 Electic motor 2 x 110 kW Compressor speed 1 120 rpm Power supply 3x400 V/3/50 Hz Power steps 4 steps Cooling Capacity 708 kW Evaporation temperature -12C Condensation temperature +36C Secondary reagent Water / Glycol Concentration 25-30% Reagent incoming temp -2C Reagent exit temp -8C ALFA LAVAL plate heat exchanger for YORK station Manufacturer: Alfa Laval Manufacturer’s type: M10 – BWFDR Manufacturing year: 1999 Capacity: 43,5 Liter Pressure 25,00 bar Operating temp. 20/120 C // - 10/70 C Technical condition: Liquid Separator Manufacturer: GHEA Manufacturer’s type: 0519R Year 1999 Capacity 425 liter Working Temp. Min -40/Max - 50C Working pressure 28,6 bar Oil Separator Manufacturer SABROE Refrigerant. Type OVUR 4107 D Year: 2000 Operating pressure 26,00 Bar

Chiller Cooling Stations YORK - GRAM x 354 kW York HC 8125A


YORK 2 x 354 kW Chiller Cooling Stations Station has two idential units of York cooling compressors with all auxilliaries, electrical and control cabinets. Both units were stopped in full operational condition in begining of year 2018 Both units include the following main equipment • Cooling compressor York HC 8125A with cooling capacity 354 kW • Plate Heat Excanger / Evaporator type M10 • Liquid separator GHEA • Oil separator Sabroe

Xenon Fade-Ometer Atlas Ci3000+


4500 W vodou chladená xenónová oblúková lampa Celková expozícia 2 188 cm2 (339 in2) TFT farebný 12 "dotykový displej ovládacieho panela zobrazuje všetky testovacie parametre Priame nastavenie a ovládanie teploty ?ierneho panelu; neizolované (BPT) alebo izolované (BST) Priame nastavenie a regulácia relatívnej vlhkosti Priame nastavenie a riadenie teploty vzduchu v komore vzorky Zobrazenie diagnostických správ 14 výrobných predprogramovaných testovacích metód (Weather-Ometer); 6 výrobných predprogramovaných testovacích metód (Fade-Ometer) Priestor pre 12 vlastných programov; schopnos? sub-cyklu Viacjazy?né schopnosti (angli?tina, francúzština, nem?ina, španiel?ina, japon?ina, ?ínština, kórej?ina, ture?tina) Streamovanie dátových dát cez ethernet alebo USB port. Sú?as?ou balenia je aj USB disk SmartDamperTM na zníženie testovacej variability teploty a vlhkosti komory a kompenzuje zmeny okolitých laboratórnych podmienok SmartLight MonitorTM overí, ?i je nainštalovaná správna svetelná kapsula K dispozícii sú kombinácie filtrov, ktoré sp??ajú všetky bežné testovacie metódy Vzduchový filter na nasávanie vzduchu CS-7 chladiaci systém xenónovej lampy Obrazové okno pre posedenie vo dverách Univerzálne elektrické konfigurácie na splnenie miestnych požiadaviek na frekvenciu, napätie a elektrické požiadavky Sp??a bezpe?nostné požiadavky CE, UL, ISO EN a CSA Automatické odpo?ítavanie testov na základe ?asu alebo sálavého ožiarenia Systém zvlh?ovania VibraSonic ™ K dispozícii sú držiaky vzoriek, ktoré vyhovujú mnohým typom vzoriek Kalibrovaná xenónová referen?ná lampa Indikátor ?istoty vody

Gang stitchers Stahl ST300


Saddlestitcher / gangstitcher Stahl Model ST300 Year 1997 Nr of stations 7 hoppers + 1 cover station Untrimmed size 146 x 92 mm - 480 x 320 mm Trimmed size 140 x 89 mm - 474 x 305 mm Cover feeder 146 x 160 mm - 480 x 640 mm (90-300 grams) Configur ...

Paper cutting machines Wohlenberg 115MCS-TV


year 1985 width 115 cm programs air table phtocells

Paper cutting machines Polar 115 EMC


year 1980, serial nr. 503xxxx with 115 cm programs air table cells lift

JET MCS MULTIFLOW


MCS HT JET MODEL MULTIFLOW 3J HT. YEAR 2003 APPROX. CAPACITY 450 KG TERMOELETTRONICA CT301/LAN PROGRAMMER WITH HOT WATER STORAGE TANK

Weft Straightener BIANCO TRAMATEX SP04


BIANCO WEFT STRAIGHTENER MODEL TRAMATEX SP04. YEAR 2002 ENTRANCE WITH TENSION BARS AND BIANCO DOGAL SPREADER CLEANING BOX WITH BRUSH CYLINDERS AND DUST COLLECTOR BIANCO PIN WHEEL WEFT STRAIGHTENER WITH SIEMENS TOUCH SCREEN PROGRAMMER

Paper cutting machines FTP FA 155


-Light 155 cms., Year 1996 -EG control programmation, Chromed air bed -Photocells, 2 spare knives -Manuals and documentation, tools

Decatizing machine TMT PF1293 MULTIPROGRAM


TMT BATCH DECATISING MODEL PF1293 MULTIPROGRAM. YEAR 2002 ROLLER WIDTH 1.800 MM DIAMETER OF AUTOCLAVE 1.200 MM CAPACITY OF FABRIC 400 - 600 M EXIT BY FOLDER

Paper cutters Schneider 115SC Video


Programmable memory Touch button control Video screen Cast iron bed with blowers Side tables – cast iron with blowers Rear table guards Side table guards FFM Two speed back gauge Variable foot pressure pedal Two hand knife control Spare blades  ...

manroland Practica PRZ 00


44 Mio Impression MABEG stream feeder Streamdelivery with suction feeder Rolandmatic Dampening with cooling unit sheet decurler photoelectronic sheet detector Powder unit Weko T66C Programmable preset counter enhanced impression cylinder Perfe ...

Packaging lines for carton SITEMA Serafin Group IMB


Brand packaging line SITEMA "Serafin Group, IMB model, used. Complete user's manual, wiring diagrams and Declaration of conformity. Scope of supply: -Conveyors of transport -Strapping machine -Cementing machines and barcode label printer -Loader ...

Panel saws Griggio C45


Circular saw with counter, brand Grey model C45 2009 built, compact, equipped with manual, wiring diagram and conformity certificate, used. Technical characteristics: 3200 mm tank size. Ability to squaring engraver 3260x3000 mm. Minimum size of workpi ...

CNC pipe bending machine Ercolina EB76CNC6V5


Year of manufacture 2012 Manufactured by Ercolina (Italy) Programmable axis: 3 Capacity: Round tube, mm 76,2 x 5 Stainless steel tube, mm 76,2 x 3 Cooper, aluminium tubes, mm 76,2 x 8 Square tube, mm 63,5 x 63,5 x 4,2 Rectangular tube, mm 40 x 60  ...

Paper cutting machines Polar 115 E


- width 115 cm - programs - air table - photocells - side tables

Yarn dyeing machines MCS MFJ4HT


JET MODEL MULTIFLOW MFJ4HT MCS. YEAR 1999 -4 STRINGS -CAPACITY 500 KG -PROGRAMMER THIES T858

Yarn dyeing machines MCS


JIGGER MCS HT, CYLINDERS WIDTH 3,200 MM, AÑO1989 HYDRAULIC DRIVE PROGRAMMER TERMOLELTTRONICA CT-401

Yarn dyeing machines MCS COMBY JIGGER JP70


JIGGER MCS HIGH TEMPERATURE (140 ° C), MODEL COMBY JIGGER JP70, YEAR 2003 IN 2008 TERMOLELTTRONICA REMODELED PICTURE TABLE WIDTH 2000 MM HYDRAULIC DRIVE PROGRAMMER TERMOLELTTRONICA TANK ADDITIVE EXTERIOR AND ENGINE ARM HYDRAULIC FOR WIND-UP ...

Yarn dyeing machines THIES TRD 140 / 2


Brand: THIES Year: 2003 Capacity: 300 Model: TRD 140 / 2 Number of strings: 2 Programmer: SETEX control panel 737 XL Temperature: 140 WITH INVERTER

Paper cutting machines Schneider Senator 185 MC


Guillotine Schneider Senator Model 185 MC Year 1979 Cutting length 1850 mm Details Airtable Sidetable left + right with air Photocells Digital Program MC Technical condition many new parts were installed during last year, the machine wil ...

Autoplaten / Die cutter Bobst SP1420E


Autoplaten/die cutter Bobst Model SP1420E Year 1969 Sheet size 500x700 - 1020x1420 mm Substrates 200 grams till 5 mm thickness (board up to 3 mm) Diecuting power 600 tons Max mech. speed 4.500 sheets per hour Details with stripping station, elevat ...

Paper cutters POLAR 78X


POLAR 78X / year 2005 / Color display / Programmable / Air table / 1 extra knive. POLAR Jogger with pressroll RA-2 / year 1998 POLAR Lift LW1000-4 / year 2001 Available: June 2018

Paper cutters WOHLENBERG P92 HTVC


Color display / Programmable / Chrome table with air and big site tables / 1 extra kive. Available: June 2018

Paper cutting machines Polar 92 EM


Guillotine Polar Model 92 EM Year 1987 Cutting length 920 mm Details Air table in main Side table left + right with air Photo cells Digital Program EM Available direct
Get the latest machine offers by email: order newsletter